Error during Process order settlement

Hi Gurus,
i am facing problem during the process order settlement. an error is occured is as follows: Tax code V0 country IN does not exist in procedure ZTAXIN.
actually this V0 tax code is assing to the ZTAXIN procedure & which is also assign to country. i couldn't get why it ask tax code during the settlement.
In Process order Itemization i find the 2 GL ( Element) in which there is one consumption GL & second is COFG sold GL. from GL Master i remove both GL Tax category & also remove the click from posting without tax allowed. till i am facing this problem?
Please help me to overcome this issue.
Point will be rewarded if question solved.
Than'x
Dhananjay R

hi gopan,
Than'x for attention on my question. till my problem is not solved. during the process order why it hit the tax code? would u please guide me how to find the tax code assignment which hit during the process order settlement?
i have check all the Tax related setting till this issue not solved. ( Check calculation procedure (OBYG), Tax code assignment (FTXP), also check the Tax Account Integration (OB40).
also i remove tax related assignment from the GL master related to specific gl which are display in component structure.
pls help me to solve this issue..
Than'x
Dhananjay

Similar Messages

  • Error during process order creation

    while i create a process order following error is coming "recipe is empty"
    please tell me where exactly i'm going wrong.

    Dear Dhaval,
    Welcome Back
    Long time heard from you and nice to see your reply from long time
    Good Luck !!!
    Regards
    Madhu

  • Process order settlement

    Hi,
    when i do process order settlement , system gives error message that "maintain the settlement rule of the sender".
    Process order contains two co-product and i have given details in "joint production" in MRP II tab.
    When i checked order settlement rule in COR2 i couldn't find anything and when i try to insert new settlement rule system gives error message .
    Sunoj

    error message when executing KKS2
    KV     206     1     OIT 20000095/1     No suitable settlement rule found for object OP0000200000950001          Checking and processing orders

  • Restriction during process order confirmation

    Hi,
    I want one validation during process order confirmation (mile stone) through t code COR6N  if resource capacity & shift intervals not maintained ( t code CRC2) then process order should not confirmed &  there should be error message. Plz advice how it is possible through customization.
    regards,
    sps.

    Dear shukla,
    Check with this User Exit,
    CONFPI02                                Process order confirmation: Customer spec. input checks 1
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection
    CONFPI04                                Process order conf.: Customer specific input checks 2
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
    If the above is not working then check with this BADI
    WORKORDER_CONFIRM at the time of saving,
    Regards
    S Mangalraj

  • Error during processing local bean: localejbs/RfcAFBean

    Hi everybody
    we currently trying to perform a RFC Call to our developpment system. The scenario is a simple File to RFC Scenario and it worked until yesterday. Since today the Messages stuck in the RFC receiver Adapter with the following errors in the audit log:
    MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback.
    Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
    The deffaultTrace.trc show the following entries. Looks like an error in localejbs/RfcAFBean:
    RfcFunctionName:ZPSCD_INTERFACE_XXXXX
    Date : 07/13/2007
    Time : 9:32:39:301
    Message : 
    [EXCEPTION]
    com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
         at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
         at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
         at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
         at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
         ... 14 more
    Severity : Error
    Category :
    Location : com.sap.engine.services.ejb
    Application : sap.com/com.sap.aii.adapter.rfc.app
    Thread : SAPEngine_Application_Thread[impl:3]_44
    Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
    Message ID : 0003BA5D1D27006D000002BF0000653B000435201DA336D6
    Source Name : com.sap.engine.services.ejb
    Argument Objs : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
         at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
         at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
         at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
         at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
         ... 14 more
    Arguments : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
         at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
         at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
         at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
         at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
         at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
         at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
         at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
         ... 14 more
    Dsr Component :
    Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
    Dsr User :
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 1
    Relatives :
    Resource Bundlename :
    Session : 0
    Source : com.sap.engine.services.ejb
    ThreadObject : SAPEngine_Application_Thread[impl:3]_44
    Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
    User : J2EE_GUEST
    Date : 07/13/2007
    Time : 9:32:39:304
    Message : Error during processing local bean: localejbs/RfcAFBean
    Severity : Error
    Category :
    Location : com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(String , ModuleData)
    Application : sap.com/com.sap.aii.af.app
    Thread : SAPEngine_Application_Thread[impl:3]_44
    Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
    Message ID : 0003BA5D1D27006D000002C00000653B000435201DA33A4D
    Source Name : com.sap.aii.af.mp.ejb.ModuleProcessorBean
    Argument Objs :
    Arguments :
    Dsr Component :
    Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
    Dsr User :
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 0
    Relatives :
    Resource Bundlename :
    Session : 0
    Source : com.sap.aii.af.mp.ejb.ModuleProcessorBean
    ThreadObject : SAPEngine_Application_Thread[impl:3]_44
    Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
    User : J2EE_GUEST
    Date : 07/13/2007
    Time : 9:32:39:306
    Message : Rolling back transaction for message 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND) due to: Exception thrown in method process. The transaction is marked for rollback.
    Severity : Error
    Category :
    Location : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
    Application :
    Thread : SAPEngine_Application_Thread[impl:3]_44
    Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
    Message ID : 0003BA5D1D27006D000002C10000653B000435201DA341C8
    Source Name : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
    Argument Objs : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
    Arguments : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
    Dsr Component :
    Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
    Dsr User :
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 1
    Relatives :
    Resource Bundlename :
    Session : 0
    Source : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
    ThreadObject : SAPEngine_Application_Thread[impl:3]_44
    Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
    User : J2EE_GUEST
    It looks like the JCO Bean has an error. Any Ideas
    Regards Oliver

    Hi Bhavesh
    I found some more interesting log entries and it seems to be a user password problem:
    Retries exceded, set message 38f10280-3388-11dc-9c91-0003ba5d1d27(INBOUND) to status NON_DELIVERED.
    Name or password is incorrect (repeat logon)
    JCoClient connection missingHost:xdsci_XDS_31|AdapterType:MessagingSystem|Sender::FileServer|Receiver::PSCD_CDD|Interface:ZPSCD_INTERFACE_DECLAR_TVA:urn:sap-com:document:sap:rfc:functions|MsgID:38f10280-3388-11dc-9c91-0003ba5d1d27
    Is this the user/password of the channel or is it service user for the JCO?
    Regards Oliver

  • Statistic condition values not updated during Sales order Settlement

    Hi,
    In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
    We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
    For this purpose we have created one COPA Assessment Cycle.  Tracing factor is Sales Revenue and receiver is Materials.
    In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
    For this reason we have created one new statistic condition type,  what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
    Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
    So is it possible update during sales order settlement time statistic condition values.
    Please give me suggestion.
    Regards,
    Thiru

    Hi Ajay Sir,
    As you said is correct.
    But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field.  System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
    Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
    Please suggest me is there any alternative.
    Regards,
    Thirumalesh .

  • Problem during Process Order Confirmation - COR6N

    Dear All,
    We are into process industries
    Till now we are creating different BOM for each section and different process orders for each BOM.
    For example Pulverize, Acid MIXING, Continuous Rotery, Blending and Packng.
    Now we have created new BOM for FG - showing all input/output of  RM, SFGs.  In Recipe, define operation for each section. and assign operation to material.  I have attached screenshot of Recipe Operation.
    During process order confirmation, system shows movement type of all material perfectly during each phase. But during confirmation of last phase system does not show 101 movemet of FGs.
    I have checked in Recipe, control key is ok i.e. Automatic GR,  in OPK4 setup is also correct.
    We have created new BOM and Recipe. There is no change in other configuration parameter.
    Thanks and Regards,
    Nirav

    Hi Nirav
    The automatic goods receipt is defined by the operation/phase control key.
    Control key PI03 has the automatic goods receipt setting by defaul.
    Analyzing the screenshot I could observe that this control key is assigned to all the opration/phases, however, it should only be assigned to the last operation/phase, where the goods receipt will actually take place.
    For all the previous operations/phases you should use a different control key, without automatic goods receipt, such as PI01.
    BR
    Caetano

  • Process order settlement to cost center

    Hi,
    We have a requirement to settle only the quantity to material and the costs to
    cost center from the process orders. This is to ensure the materials are
    handled as non-valuated and the COGM is computed from the goods consumption
    postings.
    The process orders will have both co products and by products as well.
    There is also one more requirement to allow Purchase orders against the non-
    valuated materials.
    I am planning to propose the following :-
    1) To make the materials valuated but set the standard price to zero to give
    the effect of non-valuated materials and at the same time can also raise
    purchase orders because otherwise non-valuated materials cannot be used to
    raise Purchase orders.
    2) When goods receipt happens from the process order the actual costs of the
    process order will remain as it is in the process order since the standard
    price of the FG is zero and only the quantity will be received into inventory.
    3) When process order settlement happens the full actual costs will be settled
    to a price difference account and cost center tied to the price difference
    account.
    Do you guys see any flaws in the above design?
    Edited by: FICO Consultant on Feb 21, 2012 4:28 AM

    Answered

  • Process Order Settlement Rule by Order Type

    Hi Experts
    Our Client  a requirement to have Process Order Settlement by Order Type please let me know how it can be achieved
    In SAP  a Process Order Variance is settled via the following Combination in OBYC  :-
    1 Chart of Accounts
    2 Transaction PRD
    3 Valuation Modifier
    4 General Modifier
    5 Valuation Class
    6 GL Account
    Can   this account assignment based on the Order Type ?
    Thanks
    Suman

    Dear Suman,
    Normally, Order Types serves a different purpose. We can maintain default settlement rule, Costing Variants, Settlement Profiles, Number ranges etc at Order Type Level.
    It is not possible to directly manage the Order Types in the Account Assignment in OBYC.
    Thanks & Kind Regards
    Umapathi G

  • PROCESS ORDER SETTLEMENT - KO88

    Hi!
    As per my knowledge KO88 will be done for OHDS and for Material.  OHDS settlement will be done in month ending which results the difference between KSII and KP26.
    Can anybody explain how the accounting entry will be generated at the time of Process order settlement of material i.e. KO88. 
    Sreenivas

    Hi
    Settlement entries are same as in production order.  No diff
    However, u must be aware settlement entries are dependent on status of process order.  If status is DLV or TECO wip is calcelled and variances are calculated.  If status if PREL or REL or PDLV wip entries are posted. 
    Hope you have made settings in WIP for offsetting entries
    Pls assign points if this clarifies else send query with more explanation

  • There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

  • Error during Production Order Confirmation

    I get a real wierd error during production Order confirmation.  The error message is
    "Additional items are not allowed
    Message no. ZOAL010"
    Can anyone throw some light on this?
    Regards
    Raj

    it is not std SAP message.
    you can check the user exit for confirmation.
    check in transaction code CMOD/SMOD for CONF*

  • Process order settlement error

    Hi all
            while doing settlement of process order in KO88, system throwing the follwing error.
                     '' valuation data for the material is being locked by the user xxxxxx'' .     If we check in transaction: SM12 , here system showing MARA, MARC tables being locked.
            Some background jobs also running which include MARA,MARC tables.   so please suggest me the best way to do settlement of process orders.  The background jobs should not stop.
    thanks
    sapproduction

    HI
    At the  same time one masters like material WC or PV cannot be processed the database tables used are locked while processing the same to get resolve this  check the time  of scheduled jobs which uses tables like MARA MARC after the finish of these jobs you can process the settlement if you get unlock the data from T code SM12 there is possibility of getting data lost. so
    you can define your settlement process and schedule it just after the completion of those previous Jobs.
    Check and revert
    Regards
    Anupam Sharma

  • Process Order Settlement without GR or GI

    Hello,
    I have a quick question that I need help with please. A process order has no Goods Receipt yet (only consumption) as of month-end when we settle all orders. Will such an order settle and post an entry to GL even though it is not completed yet?
    Also, if an order has Goods Receipt but no consumption (I know it doesnt make sense, but it is an error order), will it still settle?
    Thanks,
    Gligor.

    Hi,
    If I understood correctly, you have consumptions of RM from your inventory but you dont have production GR.  You wanted to do the order settlement. 
    - Why do you want to settle order that is not completed in production?  If there are any expenses on the order during the month, shouldn't these expenses be tracked as WIP? 
    - Also, for the case where there are GR without GI, are there any activity consumptions on the process order? 
    Thanks,
    Ram

  • Missing stock during Process Order creation

    Hello Masters.
    I'm facing a new problem here in my client.
    Thats the situation:
    We are trying to generate a subcontracting process order to delivery a semi finished material to a supplier in order to be packed. We already have a contract with this ssupplier, its been saved as a supplier, we already did this operation with him more than once.
    The question is that during the process to create the process order, system is giving us a message that there is no enough stock off semi finished material to be send to the supplier.  (it comes a message that is missing a small quantity to fiill the right amout we want to send to the 3rd party - something around 1,5% of the total amount)
    But if we go to MMBE we can see the same amount of stock we want to delivery to the supplier in free utilization.
    Besides we are using here WM we didn't see any difference that could give us the error.
    In QM inspection batch all the amount were released (321 movement) no sample quantity was taking/retained.
    The most insteresting part is the we did the same operation for the next batch of the same semi-finished material. I mean for the batch produced yesterday (monday may 9th) we already sent to the 3rd party for packing but for the batch from last friday, we are facing the issue.
    In this case we have the same kind of process order, same 3rd party, same materials, same process a so on.
    Please could you give me an idea where should I look for a solution.
    Thanks in advance.
    Harlen

    Hello Vivek thanks for your anwer.
    However, Ive talked to a QM consultant and presented the issue for him. He told me to use a SAP program QEVAC20 ( notes  48815 and 717622 ) to check possible inconsistences  between QM and IM stock.
    So We will try to use this report to check if there is an issue. Have you used this program before? Do you think it should help us?
    Due to the process to create the process order, there is no issue, no issue with batch number or inspection lot. The error message comes when we try to select the batch number of semi finished material in COR1 tcode.
    The message complains theat is missing a small quantity of the batch.
    Tks,
    Harlen

Maybe you are looking for

  • How to display a text file in a html page?

    I have written a servlet that executes a batch file whose output is saved to a txt file. I am attempting to display content of the text file as a html page from the servlet but am struggling I have attempted to read the file and output it as shown be

  • Credit card registration in iTunes

    i find that itunes is the main gateway for any transaction with apple for any app store or other transaction and for the same, you need to register your credit card. can somebocy tell me how safe it is, since the cvv no also is required to enter whil

  • Windows Defender won't run on Twist after updating BIOS to 1.52.1.52

    I ran a Windows Defender scan last night, all worked fine. Today, I used Lenovo's system update to update the BIOS to 1.52.1.52. Immediately after the reboot, I tried another Defender scan. It wil not complete: early into the scan, the fan speed incr

  • Error occured in blackberry world

    Hi I have a problem in opening blackberry world after updating blackberry world...kindly tell me how to fix it... Solved! Go to Solution.

  • _name property for this keyword

    When you are using the keyword this inside of an event handler it refers to the object that triggered the event. For example if OnLoadInit of a sound object is triggered you can say this.play(); Is there any way of returning the instance name of this