Error during repeat run depreciation via tcode AFAB

hi,
I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
1. Field Cost Ctr is a required field for G/L account 4300000
2. Account 'Expense account for ordinary depreciation' could not be found.
Appreciate your advise to solve the errors.
Thanks a lot!

Dear Mohd.,
PLease check the following in ur configuration:
1) You must have CO implemented. That is why when u run, AFAB system posts its depreciation in cost center mentioned in asset master. Now do one thing, take out the list of assets where cost center is not attached. Take out this info from ANLZ table.
2) Go to AO90 & check the account assignment to all the account determinations.
Try executing after this. It will work.
Regards,
Ajay

Similar Messages

Error during repeat run for depreciation via tcode AFAB

hi,
I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
1. Field Cost Ctr is a required field for G/L account 4300000
2. Account 'Expense account for ordinary depreciation' could not be found.
Appreciate your advise to solve the errors.
Thanks a lot!
Hi,
Appreciate anyone to help me on this issue.
Edited by: MOHD. FAIZAL OMAR on May 15, 2008 4:38 AM

Hi,
The ERP Financials forum would be more appropriate for this topic.
SAP ERP Financials
-Paul

Error during payment run in F111

Hi all,
Just wanna ask you regarding error during payment run in F111.
Currently we are doing something in FI in order to support BCS requirement; which all the financial posting that involved balance sheet account must be fill up or having the mandatory profit center. For this purpose, we are creating new validation which will be activated starting 1.1.2011, and currently we are doing the testing on all modules including CFM.
For this purpose, we already identify those balance sheet account that now having blank profit center and ask user to give the default value for it, for us to config it in a FAGL3KEH table.
For those balance sheet account that need to pass the validation (in case user need more time to think of the default value), we already create one set ID to exclude those balance sheet accounts.
In CFM, i already created one bank to bank transaction (bank transfer) for this testing. Example: Company A (GL acct 58010120) >> Company B (GL acct 58010140)
When looked into FAGL3KEH, the only default value 58010120 and the rest of it (58010121, 58010122, 58010140, 58010141, 58010142) being inserted in the set ID. Supposed when i do the payment run at F111, system should passed the posting, but there is an error stated 'Balancing field "Profit Center" in line item 001 not filled'. When ask to one of my colleague, he said that this is due to the CFM's config, not the validation. Can you help me? I don't know where to check as i believe the config for bank to bank transfer is simple and should be no problem. Is there any suggestion??
Thanks.

Hi,
This is not a config in CFM. It is a config of New GL. In new GL configuration, under GL Accounting -- business transaction -- Document splitting -- Define Document splitting characteristics. In this check whether the profit center is specified as a zero balance field and also a mandatory field. It must be based on business requirement so you need to specify a profit center by means of any linkage to cost center or through default account assignments.
Regards,
Ravi

How to solve error when run Depreciation (T-Code:AFAB)

Dear All Experts,
Hi,
I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB). with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
Documents manually posted within dep.doc.number range
     Message no. AA728
Diagnosis
     In the number range interval for the document type for posting
     depreciation, a document has been posted which was not created within
     the framework of depreciation posting. The last document posted by
     depreciation posting was assigned the number .
Procedure
     Contact your Systems Specialist. When changing the number range interval
     for the document type in depreciation posting, you have to specify a new
     interval in which no documents exist. Using organizational measures, you
     can guarantee that there are no documents apart from those created by
     depreciation posting in this number range.
Would you help me how to solve this error?
Thank you in advance
Best Regards
Utarat.P

Hi Utarat,
first question is: have you really manually posted a Documents within dep.doc.number range
If you post with RABUCH00, note 193984 could be relevant for you.
Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
Example:
TABA
MANDT BUKRS AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ
100   XXXX   2010   004    01     4200000013 4200000016 X
100   XXXX   2010   005    01     4200000017 4200000020 X
100   XXXX   2010   006    01     4200000021 4200000024
On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already
exits.
BUKRS BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
XXXX   4200000024 2010 YY    30.06.2010 06.07.2010 19:36:30 ABF1
XXXX   4200000037 2010 YY    30.06.2010 06.07.2010 19:37:47 ABF1
Regards Bernhard

Repeat run depreciation in AFAB

Important and urgent
The issue is related to depreciation, I have changed the depreciation key in the asset class and depreciation was posted this resulted in very high value of depreciation for the period. As standard SAP I understand that when we change the depreciation key in asset class this will recalculate the depreciation values.
What I now done is I have put back the depreciation key again and run AFAR (Depreciation planned run) and trying to do repeat run using AFAB for posted values in the period.
But the posted values are not making any change, when I done the same in Quality this took affect. Any suggestions please...
Thanks
Srinath

Hi Srinath,
if you change the depreciation key in the asset class (OAYZ) it has definitely no effect on already created assets.
This could only has an impact on assets that you create up to now.
Please check (in AS02) which depreciation key you have on the asset itself.
If this is the wrong key, please change it and make a recalculation of values.
regards Bernhard

Error during costing run(CK40n)

Dears
During costing run (ck40n),we got following errors,
1)Consumption account cannot be determined
2)Costing items for material R150 in plant EZP1 without cost element
3)Cost component split costed with value of Zero.
Can anyone tell what rectification has to be done ?
Regards
Akshay

1)Consumption account cannot be determined - Please see that consumption GL account for the raw material valuation class is assigned in OBYC..
If you doub le click on the message it gives the combination of
transaction/Controlling area/Valuation class/account modifier... for which you need to assign a consumotion account in transaction OBYC.
2)Costing items for material R150 in plant EZP1 without cost element - Please doubkle click on give the description of the message...this may be due to one of the primery cost element is not created as GL a/c or visaversa.
3)Cost component split costed with value of Zero.--if you solve the above this message will disapper.
pl come back

Portal Runtime Error during first run of NWSneakPreviewSP16

Hi there!
I'm new to SAP and have the following problem while using the NWSneakPreviewSP16 for Java:
Login to portal is successful.
Header loads correctly.
Content page yields an error:
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Komponentenname : com.sap.portal.layouts.framework.WAandNavPanel
I searched the forums and found the location of the log files. The error there is:
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Error occurs during the compilation of java generated from the jsp
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:109)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
     ... 45 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2189)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:81)
     at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:140)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:284)
     at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:134)
     ... 48 more
Can anyone help?
Thanks in advance,
Robert
Message was edited by:
        Robert Rodewald
Message was edited by:
        Robert Rodewald

Hi Jin,
I think SAP note number 796540 will be helpfull to you.
It was known User Management issue which is not connected to any Unification feature.
Personal advice: try to restart Portal server.
Regards,
Julia

"Error 13 writing data in step 6: type mismatch" - Error during package run

Hi experts,
I am using SAP BPC 7.0 M and facing an issue while importing a package. I am encountering the error : "Error 13 writing data in step 6: type mismatch". The package is running successfully for some files but is failing for similar other files. The data is uploading successfully on server but still it is giving an error while conversion.
Thanks,
Regards,
Kamya Nagpal

Hi All,
In continuation to the above message:
Even when the package is failing, the data is getting uploaded in the server.
Thanks,
Regards,
Kamya Nagpal
Infosys Technologies Limited

Error message when running script via package

Hi there,
I have a problem I can't understand - I am running a script from a package, and I get this error message:
CopyCatFinanceError
Invalid dimension ALL_FCSTPRICING in Lookup rule
where CopyCatFinance is the name of the package, and ALL_FCSTPRICING is the name of a parent in the Category dimension.
I don't understand why this member is being flagged as a DIMENSION, when it is only a member. And I don't understand why this is being flagged at all - this dimension has been reprocessed, as has the application (in fact, all the applications), the script has been re-validated and a full Optimise has been run several times...
I am now out of ideas! Any thoughts?
We are running BPC for MS 7.0 sp 7, on SQL 2005.
Thanks a lot,
Jason
PS. And there are no lookups in this script either - I'm referencing the category dimension with the %CATEGORY_SET% variable as the user selects this at runtime.

Can you post your logic, also check your lgx files are making sense.

Ecatt error during IP04 run

Dear All,
I am finding one error in running the Esecatt
I have created template for creating Maintenance item for t code Ip04 ,By Secatt
I have created template as per std procedure in secatt
Like first creation of test script then creating test configuration
after creating the template we have entered the data
Now following error is giving while creating the secatt
Error in ecatt command TCD IP04
EIP328 Enter an order type
but we have already entered the order type as GPM (Generated prevetivte maint order type)
what could be the reason
Regards
chand

Dear all
It was an Data error
thanks
chand

Error during MRP run for a Material : Calendar date

Hello All,
I am trying to run MRP for a material and it is not creating Purchase Requisition. It is giving an error that says " 08/10/2003 date lies before start of factory calendar. (Please correct)"
The MRP is set up in such a way that we have a special procurement key pointing to another plant. So we are expecting it to create a Purchase Requistion on that plant but it is not doing so.
I am not expecting a change of dates in the calendar.
Please let me know what the issue would be and where can I correct it.
Thanks
Regards
SAP Fans...

MRP will create a requisition in your plant to procure from the plant that is mentioned in the special procurement key.
The second best solution is to maintain a calendar for this past old year 2003 in your system by using transaction SCAL.
But why would you need a requisition for a time 6 years back? Ever thought about this?
You must have a production order or sales order with a wrong delivery date or replenishment lead time in your system. Because of that the MRP run calculates an expected delivery date for the requisition item that far in the past.

Function Module does not exist error during query run time.

Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.

even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.")

Depreciation repeat run (period 14) - no areas to post to...

Hi Experts,
We have problem - cannot run Repeat run depreciation (posting to period 14 - audit adjustment)
We did reverse document for fixed asset, therfore we would like to do Repeat run depreciation.
However while we run, the error showing "there are no areas to post to in company code xxx"
Kindly advise. Thank you.

Hi,
- simulate AFAB for period 15 (if exists) for the specific asset and see if it has any entries
- try repeat run for period 14 specifying the asset number in the selection screen
- check for Posted Values tab in AW01N for the asset in question and see if any yellow triangle is seen or any depreciation planned.
Rgds.

ORA-00942 Error during unicode export of BI 7.0

Hello Everyone,
I am doing an export of a non-unicode BI 7.0 system to convert and import it into a Unicode database. All the jobs have passed except one and I see the following error in the log file (SAPAPPL0_3.log)
/usr/sap/ABD/SYS/exe/run/R3load: START OF LOG: 20080302124247
/usr/sap/ABD/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/ABD/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jun 9 2007 09:20:06
/usr/sap/ABD/SYS/exe/run/R3load -e SAPAPPL0_3.cmd -datacodepage 4102 -l SAPAPPL0_3.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) WARN: UMGCONTAINER has 1 problems.
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1100
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "ABD20070922100908
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ussbbdd5                                                        "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "ussbbdd5"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "INITIAL   "
(EXP) ERROR: DbSlExeRead failed
rc = 103, table "/BIC/SZTERR_CD"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
/usr/sap/ABD/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/ABD/SYS/exe/run/R3load: END OF LOG: 20080302124251
When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
I did finish all the unicode preconversion steps and also ran the SMIGR_CREATE_DDL program. I had exported recently from the same system but I never got this error during that run.
Another question is about the order in which the steps need to be performed. I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
Thanks again for your help!

Hello Stacy,
> When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
> SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
If the object does not exists on the source target database, please check if the ddic of sap still contains the table definition. (SE11 or SE14)
If yes you can set the status of the table /BIC/SZTERR_CD to "ok" in the corresponding task file.
You can not fix this problem in other way after you have started the conversion, because of the export files are already generated (with the information of the sap ddic)...
> I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
That was the right way.
Regards
Stefan

HAL & XML error during compilation

Hi, I'm new to this so I hope that the question is not out of place. I'm using HAL to generate XML files. Whithin HAL, I pass some info to the XML adapter which when when the XML file is created, the new info is included in the xml file. I do get this error during a run however. Any ideas would be greatly appreciated. Compiler error: Unable to analyze the flow diagram for compilation. Flow diagram-->> Flow Diagram1 Analysis error: [Error: 1001] No matching generator found for the collector: Adapter reference-->> Template.XML/BATCH_JOB_OBJECT \ Collect Elements Compiler error: Compilation succeeded but no code was generated. Flow diagram-->> Flow Diagram1 Internal Vignette Business Integration Studio Error: Compile failed. 0 Warnings 1 Errors Error: Flow Diagram1 : The adapter's implementation cannot be made up to date. Build adapter process aborted due to errors. 0 Warnings 2 Errors 

Hi there,
Thanks a lot.How do I tranfer duke dollars to u.

Error during repeat run depreciation via tcode AFAB

Similar Messages

Maybe you are looking for