Error during requisition transfer for PDP

All,
when we try to transfer requisition from Back end ECC 50 to SRM 50, the transfer stops in the outboud queue of ECC with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message 'No partner number found for Partner <plant>". Have any one of you faced this problem. Any help would be appreciated
thanks,
Siva

Hi,
We too where getting the same error when we try to transfer requisition from Back end R/3 4.7 to SRM 5, the transfer stops in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>'No partner number found for Partner <plant>".</b>We applied the note 801133 but after applying the note we still get in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>" Transaction Type for Local system missing"</b>
Note-We have maintained Transaction Type as SHC in the attribute.801133 HAS HELPED IN RESOLVING ONE ERROR BUT IT HAS CREATED ANOTHER ERROR
Did u come across same error after applying 801133.How did u resolve it.

Similar Messages

  • Printing dunning notices using SMARTFORMS,error during parameter transfer

    Hi Friends,
                    I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                    I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
    However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                    Can you guys help me out.
    Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

    you can create this text ZGA_DUN_HDR  in SO10 tcode and try ...

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

    Hi,
        I am facing the problem in IR .
    <b>Internal error during bean lookup for bean RepObjectAccessBean</b>
    is the Error window I am getting frequently, After getting this error, It is no allowing to open any of the IR Objects.
    Thanks in advance,
    Dhanabal T

    Hi Dhanabal,
    i got the same error. But it is clear.
    Please chek once ur configuration part. The error is in configuration part only.
    once check all the steps in ur configuration part.
    REgards,
    chandra.

  • Error during material determination for sales document item - RRB

    Hi
    Iam getting following error when trying to create a billing request using DP91.
    Error during material determination for sales document item 40001560/000010
    Message no. AD01155
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
    Material origin is checked in costing tab in material master.
    Appreciate help in resolving this.
    thanks,
    Vaishnavi

    Hi Vaishnavi
    The error which you are getting is related to costing.So kindly reach your FI Consultant
    please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
    ERROR AT DP90  TRANSACTION
    Regards
    Srinath

  • In DP50 Error during material determination for service order

    Hi,
    While doing Resources-Related Billing request,the following error is displaying..
    Kindly Help
    Error during material determination for service order
    Message no. AD01156
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    501384
    Message no. AD01156
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    Thanks,
    Mohit

    Hi mohit,
    You need to check DIP profile setting if profile is attached to your order type or not please check this
    Thanks and regards
    Sachin Kadam

  • Error during availability check for order

    Hi PM experts,
    How can I make below warning message (W) to an error message (E)?
    Message no: CO820 (Error during availability check for order)
    Regards,
    Nizam
    PM Consultant

    Hi,
    you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability  against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
    Hope availability check rule is maintained on material master.
    Hope it helps.
    Regards,
    N.Nagaraju

  • Message error during a transfer order posting

    Hi,
    in WM, in storage type I set  "WM check based on palletization accord to SUT1" now when I post a
    transfer order the system replies with the following error message:
    Maximum quantity for storage bin A-011 will be exceeded by 1.000,000 KG
    I didn't set any max quantity for the storage bin
    Best regards

    Hi,
    no the problem of the maximum quantity still exists

  • 6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

    I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
    I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
    Any idears?
      Mac OS X (10.4.8)  

    What hardware do you have???
    You didn't answer Sue's question about free space on
    your start-up drive. You should have 20GB+ free.
    What are you sending to iDVD?
    Verbatim DVD-R, not DVD+R, are very reliable, unlike
    TDK and Memorex.
    Also look here:
    http://docs.info.apple.com/article.html?artnum=302925
    I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
    I have cleared up some room and now I have around 50GB free.
    I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

  • Error during TREX indexing for WPC content

    Hello,
    I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
    thanks
    Jaish
    [3508] 2008-08-11 15:19:19.842     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
    [3508] 2008-08-11 16:39:06.196     e     preprocessor     Preprocessor.cpp(01167) :     HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
    [3508] 2008-08-11 16:39:06.212     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)

    there was problem with Index creation the way I was creating it.

  • BAPI_INSPLOT_SETUSAGEDECISION Error during quantity posting for inspection

    Dear SAP Guru,
    I used a BAPI call : BAPI_INSPLOT_SETUSAGEDECISION in my program to perform UD and post Q-stock to Unrestricted stock. The BAPI executed successfully for my developer user account but not for end user account login.
    The BAPI returns an error as below:
    Error captured in system: EQV                  054Error during quantity posting for inspection lot 340005776022, manual proc. Required
    Guess some authorization object for the BAPI_INSPLOT_SETUSAGEDECISION call is missing.
    Have tried SE97 for possible Authorization Check for Start of a Transaction but not able to solve the problem.
    Can anyone help? Really appreciate that.
    Thanks and Regards.

    Hi ,
    Run the transction SU53 after the error with user login id , to see authorization .
    Amol

  • Account determination error during service entry for service PO

    Dear Experts,
    This about service PO. I created PO # 4501517101 & wanted to perform service entry via t/code ML81N. But I'm getting error "147 Account determination for entry OP01 FR1 OP01 not possible"
    Appreciate if could anyone assist me on this issue. TQ.
    rgds,
    nantha

    Please correct the assignment in OBYC and also in this error itself u can see one icon of proceed.If you will click on Proceed, then it will take u in to OBYC, where u have to do the corrections.

  • Error during installing nw2004s for pi

    hi,
    i got the following error during create oracle database step in installing nw2004s
    i am tring to install PI70(02) on same machine which i already installed solution manager(00,01)
    i already patched oracle database as 10.2.0.2 and i am using loopback adapter
    ERROR 2006-11-06 08:56:25
    CJS-00084  SQL statement or script failed. DIAGNOSIS:
    Error message: ORA-32004: obsolete and/or deprecated parameter(s)
    specifiedORACLE
    AI½ºAI½º°¡ ½AAUμC¾u½A´I´U.
    ERROR 2006-11-06 08:56:25
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException:
    error text undefined.
    ERROR 2006-11-06 08:56:25
    FCO-00011  The step createDatabase with step key
    |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost
    ind
    ind
    ind
    ind
    3
    0
    NW_CreateDB
    ind
    ind
    ind
    ind
    10
    0
    NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain
    ind
    ind
    ind
    ind
    0
    0
    NW_OraDBStd
    ind
    ind
    ind
    ind
    3
    0
    NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status
    ERROR .
    regards;
    Dennis

    Hi Dennis,
    Check the alert_<SID>.log in your installation.  Check if the error is shown there.  The log file will show the obsolete parameter.  In my case it was 'enqueue_processes'.  Comment this parameter and save the init<SID>.ora file and click 'Retry' button.
    The create Database phase should continue.
    Award points if the solution is suitable.
    Thanks & Regards,
    Abhijit Deshpande

  • Error during asset transfer: No depr areas for receiving revenue

    Hi....
    when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
    Thanks
    Satya

    Hi....
    I am posting the transfer from with revenue details as NBV from depr area 01,  and using the transfer variant as 2 [Net Method]. Still it gives the same error.
    I then try posting a manual revenue and again it shows the same error.
    Finally, I use No revenue option, and it accepts. do not why this is happening?
    Kindly help.
    Thanks

  • Error during acquisition transfer: Depr. area does not exist

    Hi,
    I am getting following error while posting WBS through CJ88
    Message no. AAPO107
    Diagnosis
    According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
    Procedure
    Check the transfer variant and the receiving asset.
    Can you please help
    Thanks

    This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

Maybe you are looking for