Error during SAP NW73 Installation in Create ICM userstore phase

Hello Experts,
I facing issue in new installation of SAP NW7.3 with oracle as database on Linux.
Getting error in phase Create ICM user store as , could not load SSF library /usr/sap//D00/exe/libsapcrypto.so, Though I have libsapcrypto.so in Kernel directory. Also I tried with new libsapcrypto.so from SMP. But nothing helping here.
I have tried with many solutions as per SCN, by changing kernel and all none of these are helping. Kinldy let me know if you have suggetions.
Thanks in advance,
Regards,
Shiva

Hi Shivan
Could refer the SAP Note with workaround solution on your kernel version
1926471 - Could not load SSF library libsapsecu.so
BR
SS

Similar Messages

Error during sap r/3 installation at update databse statistics

Hi friends,
I am getting an error during sap r/3 installation almost at the last stage.
the error is at update database statistics.
my configuration is
os: windows 2000 server.
d/b: oracle 9i.
erp: sap 4.7 ee
During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
I am sending the log file. Please can anybody help me, where i am going wrong-
The log file----
Click Browse and give location of export1, as shown in the bellow figure
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata4\drs620_5.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_6.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_7.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_8.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_9.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata2\roll_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata3\temp_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata1\system_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:33
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-02-04 21:46:34
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:35
Creating file c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:36
Creating file C:\oracle\ora90\database\initDRS.sap.
INFO 2007-02-04 21:46:37
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
INFO 2007-02-04 21:46:37
Creating file c:\oracle\ora90\database\initDRS.dba.
INFO 2007-02-04 21:46:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:39
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:39
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:39
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:40
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-02-04 21:46:45
See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-02-04 21:46:45
'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
INFO 2007-02-04 21:46:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:59:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:10
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:44
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:44
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 22:10:44
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:45
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:46
See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:46
'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
INFO 2007-02-04 22:10:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:48
See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:48
'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
INFO 2007-02-04 22:10:48
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-02-04 22:10:48
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-02-04 22:10:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-02-04 22:10:54
Database Load
INFO 2007-02-04 22:10:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Task files created
INFO 2007-02-04 22:11:03
Command files created
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 00:06:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 03:43:19
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 04:55:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:17:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:39:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:45:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:57:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:00:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:03:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:05:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:07:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:08:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:09:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Processes finished successfully
INFO 2007-02-05 06:26:23
Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
INFO 2007-02-05 06:26:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
INFO 2007-02-05 06:26:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
ERROR 2007-02-05 06:26:55
MOS-01012 PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
ERROR 2007-02-05 06:26:55
FJS-00012 Error when executing script.
kindly help me where i am going wrong.
Yours friendly,
Bharath.

Hi Andreas,
many thanks to you for the timely help.
a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
" ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
Should I apply any patch just the same way we do for Oracle 8.1.x ?. If so, where can i get the patch for Oracle 9.0 .?.
b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
Your friend,
Bharath.

Errors During sap 4.7 installation-kindly help

Hi friends,
I am getting 3 errors during sap 4.7 installation.kindly help.
i herewwith giving the error details:-
1. R/3 Basis System Initialization DB-Connect Failed, Return code 000256
2. R/3 Basis System: operating system call Recv failed error no. 10054
3. R/3 Basis System: Database connection Disconnected.
After i have strated the sap server(MMC) first it will goto yellow and then green and againg goes to yellow color. message and dispatcher turned to gray.
Pls help.your advise is considered very useful
Thanks and Regards,
willaim

William
What OS are you using please? (Windows I assume) On the surface, it sounds like a socket error. (i.e. the message server port is blocked by an existing application).
The dispatcher will fail as a result of the message server not being available. Would you check and post the contents of the 'dev_ms" file in the work directory? Also, contents of the dev_disp would be helpful here also.
Thanks,
Tim

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Error during ecc6.0 installation ..plz help asap

Hi all
i am installing ecc 6.0 on windows 2003 standard 64 bit
with database ibm db2 version 9
i am getting the following error during the installation phase
error during abap import phase
i am attaching error log files
import.monitor.log
===============================================================
INFO: 2007-05-03 22:17:51
Import Monitor is started.
CONFIG: 2007-05-03 22:17:51
Application options:
dbCodepage=1100
dbType=DB6
extFiles=no
importDirs=E:\idesins\51032413\1of6\EXP1;E:\idesins\51032413\2of6\EXP2;E:\idesins\51032413\3of6\EXP3;E:\idesins\51032413\4of6\EXP4;E:\idesins\51032413\5of6\EXP5;E:\idesins\51032413\6of6\EXP6;E:\idesins\51032413\6of6\EXP7;E:\idesins\51032413\6of6\EXP8;E:\idesins\51032413\6of6\EXP9;E:\idesins\51032413\6of6\EXP10;E:\idesins\51032413\6of6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-05-03 22:17:51
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-05-03 22:17:51
List of packages with views: 'SAPVIEW'.
TRACE: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is started.
INFO: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-05-03 22:17:51
Data codepage 4103 is determined using TOC file 'E:\idesins\51032413\1of6\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-05-03 22:17:53
Version table 'SVERS' is found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-05-03 22:17:53
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL" SAPSDIC.TSK DB6 -l SAPSDIC.log
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
ERROR: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-05-03 22:18:21
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-05-03 22:18:21
1 error(s) during processing of packages.
INFO: 2007-05-03 22:18:21
Import Monitor is stopped.
=============================================================
import.monitor.java.log
======
java version "1.4.2_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_14-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
=========================
sapsdic.log
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Aug 31 2006 22:40:33
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(CREATE TABLE "/SDF/PAT03" ( "PATCH" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "SHORT_TEXT" SAPDB6VARCHAR(60) DEFAULT ' ' NOT NULL , "STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DELIV_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "DELIV_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "RESPONSIBL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IMPLE_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "IMPLE_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "L_IMPL_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "CONFLICTS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "CONFIRMED" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "BACKUP" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "FROM_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "TO_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "OS" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "DB" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "PATCH_TYPE" SAPDB6VARCHAR(3) DEFAULT ' ' NOT NULL , "ANCESTOR" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "STRICT_SEQ" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "NO_GEN" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SPAMFIX" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "ADDON_ID" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "ADDON_REL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IGN_CONFLI" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "AP_ANCEST" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "EPSFILSIZ" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "HI_ANCEST" SAPDB6VARCHAR(2) DEFAULT ' ' NOT NULL , "COMP_REL" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "COMPONENT" SAPDB6VARCHAR(30) DEFAULT ' ' NOT NULL ) IN IDE#DDICD INDEX IN IDE#DDICI LONG IN IDE#DDICD)
DbSlExecute: rc = 102
(SQL error -601)
error message returned by DbSl:
SQL0601N The name of the object to be created is identical to the existing name "SAPIDE./SDF/PAT03" of type "TABLE". SQLSTATE=42710
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: END OF LOG: 20070503221753
=============================================
any help will be much appreciated.
thanks.
Message was edited by:
Abdul Wahid Khan

Hi,
Restart the installation from the begining
Regards
Umesh K

URGENT- checksum error during database instance installation

Hi Experts and Developers,
I would be glad,if you can help me solve this.
I did not have any problem during Central instance installation.But getting 2 checksum errors during my database instance installation.
The log file for 1st error says
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024333
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -ctf I E:/DVD1/EXPORTS/EXP1/DATA/SAPSSEXC.STR C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.log
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917024333
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024703
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
Syslog: k xxx : rscpexcc 11
(rscpsumg) Please look also into "C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC001.xml".
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
(DB) INFO: BRATEXT created #20060917024719
(IMP) INFO: import of BRATEXT completed (259725 rows) #20060917024803
(DB) INFO: BRATEXT~0 created #20060917025001
(DB) INFO: D010INC created #20060917025001
(IMP) INFO: import of D010INC completed (338126 rows) #20060917025011
(((((I did copy only the first and last few lines))))
(DB) INFO: DM45T~0 created #20060917030515
(DB) INFO: DM46S created #20060917030515
(IMP) INFO: import of DM46S completed (99 rows) #20060917030516
(DB) INFO: DM46S~0 created #20060917030516
(DB) INFO: DM46S~A created #20060917030516
(DB) INFO: DOKCLU created #20060917030516
(RFF) ERROR: invalid checksum in data file "E:/DVD1/EXPORTS/EXP1/DATA/SAPSSEXC.001"
 current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917030913
The log file for second error says
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024334
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -ctf I E:/DVD1/EXPORTS/EXP2/DATA/SAPAPPL1.STR C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.TSK ORA -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.log
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917024335
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024703
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.cmd -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
Syslog: k xxx : rscpexcc 11
(rscpsumg) Please look also into "C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1001.xml".
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
(DB) INFO: /SAPDMC/LSOFIL created #20060917024728
(IMP) INFO: import of /SAPDMC/LSOFIL completed (0 rows) #20060917024728
(DB) INFO: /SAPDMC/LSOFIL~0 created #20060917024729
(DB) INFO: /SAPDMC/LSOFIW created #20060917024729
(IMP) INFO: import of /SAPDMC/LSOFIW completed (0 rows) #20060917024729
(DB) INFO: /SAPDMC/LSOFIW~0 created #20060917024730
 (((( I did copy only first and last few lines of this log file ))))
(DB) INFO: IDXRCVPOR created #20060917025240
(IMP) INFO: import of IDXRCVPOR completed (0 rows) #20060917025240
(DB) INFO: IDXRCVPOR~0 created #20060917025241
(DB) INFO: IDXRCVPOR~TIM created #20060917025241
(DB) INFO: INDX created #20060917025241
(RFF) ERROR: invalid checksum in data file "E:/DVD1/EXPORTS/EXP2/DATA/SAPAPPL1.001"
 current table was "INDX"
(DB) INFO: disconnected from DB
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917025244
For your understanding ,
Here are the steps that i followed,
(1)I am Installing SAP XI on Windows 2003 server standard edition with oracle 9i as database.
(2)I copied the DVDs to HARD DRIVE
(3)I created the Microsoft Loopback adapter,assigned an ip.
(4) Then installed j2sdk 1.4.2 for windows
(5) installed central instance with SAPinst

Hi Carsten,
Thank you for taking a look at my problem.
I am using NW_2004_SR1 (Netweaver 2004 SR1).
Just for your information, the size for those two files on my Hard drive are
SAPSSEXC.001 is 650,240 Kb
SAPAPPL1.001 is 126,608 Kb
and my label.asc in Exports directory is
SAP:NETWEAVER:04SR1:DVD_EXPORT:NETWeaver 04 SR 1 EXPORT DVD:D51030721
label.asc in EXP1 directory is
SAP:NETWEAVER:04SR1:EXPORT(1/3):NetWeaver 04 SR 1 Export CD 1/3:CDxxxxxxxx
label.asc in EXP2 is
SAP:NETWEAVER:04SR1:EXPORT(2/3):NetWeaver 04 SR 1 Export CD 2/3:CDxxxxxxxx
label.asc in EXP3 directory is
SAP:NETWEAVER:04SR1:EXPORT(3/3):NetWeaver 04 SR 1 Export CD 3/3:CDxxxxxxxx
Thank you,

Error during Database Instance Installation

Hi,
We are installing SAP CRM 4.0.Central Instance Installation is over without problem.However during Database Instance Installation we are getting an Error which says :
"The node E:\sap\DATA does not exist".
I created this folder manually.Then is gave another error saying
"Node C:\Program Files\sapinst_instdir\CRM_40SR1_ABAP_UC\DB\CRM\DATA does not exist."
I created this again.Then it gave another Error saying :
"Node C:\Program Files\sapinst_instdir\CRM_40SR1_ABAP_UC\DB\4.0\DATA does not exist."
Why is this error coming up again and again and any solution to this problem?
Thanks,
Suparna

This is happening because installation program is checking the existence of DB Export directories which you specified to the installation program. It has to do with the installation screen where you specify the location of your DB Export CD/DVD during installation of Database instance. Usually what helps is if you copy the DB Export CD's to a directory in your hard disk and specify that as the target for copy. Just check what you are specifying DB Export parameter screen.
Cheers,
Sanjeev

IDES system copy ..error during IMPORT_ABAP..unable to create indexes

Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
Akshay

Hi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny

Error during Database instance installation of NW04s Portal installation

Hello All,
 This is our system environment:
 Portal - NW04s SR1 (SCS instance on one host) -- finished successfully
 Database - MS SQL Server 2005 on a separate host
We are doing a domain installation. The database was installed successfully, but when trying to install the database instance during the NW04s installation, I am getting the following errors:
ERROR 2007-01-03 11:30:10 [syxxsyshlp.cpp:78]
 syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage) FSL-00001 System call failed. Error 5 (Access is denied.
) in execution of system call 'CopyFile' with parameter (
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.PFL,
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.1.PFL, FALSE), line (478) in file (synxcfile.cpp).
ERROR 2007-01-03 11:30:10 [syxxcnode.cpp:402]
 CSyNodeImpl::move(const CSyPath &
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL, ISyNode::CopyMoveMode_t 0x3) FSL-02039 Unable to move or rename node
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.PFL with type file/directory to
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL: Overlapped I/O operation is in progress.
ERROR 2007-01-03 11:30:10
 CJSlibModule::writeError_impl() MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-01-03 11:30:10 [iaxxgenimp.cpp:736]
 showDialog() FCO-00011 The step createDefaultProfile with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR .
Could anybody please help me through this process?
Thanks much in advance,
Sunitha

Hi,
I would try adding epdadm and SAPServiceEPD accounts to Administrators group and give Administrators full access to sapmnt shared area. Also double check SAP_EPD_GlobalAdmin domain admin authority and SAP_LocalAdmin and SAP_EPD_LocalAdmin accounts.
Open
DCASAPHR05\sapmnt\EPD\SYS\profile folder using explorer and created file and see if there is any authorzation issues with domail\sapinst account.
good luck
Kondala Rao

Java-Error during Solution Manager Installation

During the Installation at point "Prepare to install minimal configuration" I'm getting the following error message:
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Assertion failed: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
 var nw = NWInstall.getSystem(context.get("sid"));
 var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
 var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
 var ctcCall = ctcDirFs.concat(ctcExeFile);
 installer.writeTrace("CTC is in" + ctcCall);
 ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
 var pmgt = new ProcessMgt();
 var app = pmgt.createChildApplication(ctcCall, []);
 var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
 var user = (new AccountMgt()).getUser(userData.name);
 var env = pmgt.getProcessEnvironment();
 if (installer.onUnix()) {
 env.setUser(user);
 } else {
 if (installer.onOS400()) {
 env.setUser(user);
 env.setGroup(user.getPrimaryGroup());
 env.setKernelLibrary(nw.getOS4_Krnlib());
 env.setWorkingDirectory(ctcDirFs.getNode());
 var javaHome = nw.getJavaHome().toString();
 env.setEnvironmentVariable(new Property("JAVA_HOME", javaHome));
 installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
 app.setEnvironment(env);
 var retval = app.run([], true);
 ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
 installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 1)
As a JVM I'm using the version provided by SAP on DVD, JDK is ver6_26-rev_b21, JCE_policy is version 6.
Can anyone help me here?

WARNING 2011-12-07 13:09:36.864
Execution of the command "C:\usr\sap\DSM\DVEBMGS00\j2ee\ctc\LaunchOfflinectc.bat" finished with return code 1. Output:
 1 file(s) copied.
java.io.BufferedInputStream@4a4e79f1
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager Java
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Dec 7, 2011 1:09:36 PM ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info:
Dec 7, 2011 1:09:36 PM ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProvider
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.IllegalStateException:The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil_1_5:getStringValue25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil:getStringValue161
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transformInternal390
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform118
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform89
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2JavaProcessFactory:lightLoadProcessFromXML191
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:loadProcess402
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleProcessesInternal350
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleRootProcesses222
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessEngine:getVisibleRootProcesses489
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard121
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main585
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.reflect.Method:invoke597
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
Program terminated abnormally

Problem during SAP Solution Manager Migration - create secure store

Hi all,
I have a problem during a migration of my SAP SOLUTION MANAGEER from Linux ORACLE to AIX 6.1 ORACLE 10.2.0.4
Release SOLUTION MANAGER 4.0 KERNEL 700
I have done the export of the database and now i start with the import.
SAPINST stopped at Create Secure Store phase and this is the log of SercureStoreCreate.log file.
Unhandled exception
Type=Segmentation error vmState=0x00000000
J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
Handler1=09001000A1271B80 Handler2=09001000A1269C20
R0=0000000000000000 R1=0FFFFFFFFFFFD460 R2=0000000000000010 R3=0000000000000010
R4=000000000000000B R5=09000000089B70A0 R6=0000000111BBE829 R7=0000000000000018
R8=0000000111C23D58 R9=000000003A470000 R10=0000000111B99CB8 R11=09000000089CD638
R12=0900000008970594 R13=000000011000D0C0 R14=0000000111BBE7B8 R15=0000000110096400
R16=00000001110EC8B0 R17=0000000111C23FD8 R18=09001000A12753A8 R19=0000000000000013
R20=0000000111C23FB8 R21=0000000111BBE848 R22=0000000110096480 R23=0000000000000000
R24=0000000000000000 R25=0000000110001098 R26=0000000110096400 R27=0000000110016870
R28=0000000000000000 R29=07000000001DD260 R30=000000000000000B R31=0000000000000010
IAR=09000000089CD638 LR=00000001108BB6C0 MSR=A00000000000D032 CTR=09000000089CD638
CR=4222422420000004 FPSCR=8202200000000000 XER=2000000482022000
FPR0 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR2 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR3 4530000000000000 (f: 0.000000, d: 1.934281e+25)
FPR4 4330000000400000 (f: 4194304.000000, d: 4.503600e+15)
FPR5 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR11 4077f00000000000 (f: 0.000000, d: 3.830000e+02)
FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR13 4071f40000000000 (f: 0.000000, d: 2.872500e+02)
FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
Module=/usr/java14_64/jre/bin/libj9jit23.so
Module_base_address=0900000008998000
Target=2_30_20070530_12820_BHdSMr (AIX 6.1)
CPU=ppc64 (4 logical CPUs) (0x80000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp'
JVMDUMP010I System Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc'
JVMDUMP010I Snap Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc
JVMDUMP007I JVM Requesting Java Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt'
JVMDUMP010I Java Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".
Could please help me for finishing the migration?
Thanks in advance
Andrea

Hi,
this is the a part of sapinst.log:
ERROR 2011-09-07 10:12:18.24
FCO-00011 The step createSecureStore with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR ( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
Unhandled exception
Type=Segmentation error vmState=0x00000000
J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Signal_Code=00000033
Handler1=09001000A1271B80 Handler2=09001000A1269C20
R0=0000000000000000 R1=0FFFFFFFFFFFD460 R2=0000000000000010 R3=0000000000000010
R4=000000000000000B R5=09000000089B70A0 R6=0000000111BBE829 R7=0000000000000018
R8=0000000111C23D58 R9=000000003A470000 R10=0000000111B99CB8 R11=09000000089CD638
R12=0900000008970594 R13=000000011000D0C0 R14=0000000111BBE7B8 R15=0000000110096400
R16=00000001110EC8B0 R17=0000000111C23FD8 R18=09001000A12753A8 R19=0000000000000013
R20=0000000111C23FB8 R21=0000000111BBE848 R22=0000000110096480 R23=0000000000000000
R24=0000000000000000 R25=0000000110001098 R26=0000000110096400 R27=0000000110016870
R28=0000000000000000 R29=07000000001DD260 R30=000000000000000B R31=0000000000000010
IAR=09000000089CD638 LR=00000001108BB6C0 MSR=A00000000000D032 CTR=09000000089CD638
CR=4222422420000004 FPSCR=8202200000000000 XER=2000000482022000
FPR0 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR2 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR3 4530000000000000 (f: 0.000000, d: 1.934281e+25)
FPR4 4330000000400000 (f: 4194304.000000, d: 4.503600e+15)
FPR5 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR6 3fb9999999999999 (f: 2576980480.000000, d: 1.000000e-01)
FPR7 3c63333333333333 (f: 858993472.000000, d: 8.326673e-18)
FPR8 0000000082024000 (f: 2181185536.000000, d: 1.077649e-314)
FPR9 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR10 4330000000000000 (f: 0.000000, d: 4.503600e+15)
FPR11 4077f00000000000 (f: 0.000000, d: 3.830000e+02)
FPR12 3fe8000000000000 (f: 0.000000, d: 7.500000e-01)
FPR13 4071f40000000000 (f: 0.000000, d: 2.872500e+02)
FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
Module=/usr/java14_64/jre/bin/libj9jit23.so
Module_base_address=0900000008998000
Target=2_30_20070530_12820_BHdSMr (AIX 6.1)
CPU=ppc64 (4 logical CPUs) (0x80000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp'
JVMDUMP010I System Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/core.20110907.081216.6947032.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc'
JVMDUMP010I Snap Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/Snap0002.20110907.081216.6947032.trc
JVMDUMP007I JVM Requesting Java Dump using '/tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt'
JVMDUMP010I Java Dump written to /tmp/sapinst_instdir/SOLMAN/LM/COPY/ORA/SYSTEM/CENTRAL/AS/javacore.20110907.081216.6947032.txt
JVMDUMP013I Processed Dump Event "gpf", detail ""..).
Thanks
Andrea

Error during Extension Builder installation on Mac OS

I downloaded extension builder 2.1 trial version from adobe website: Extension_Builder_2_1_LS1_trial.dmg
When I try to install it, at the end of the installation process, during "validating packages" process it stops and shows me "The installation failed. The installer encountered an error that caused the installation to fail. Contact software manufacturer...".
1. System: OS X v. 10.9 (mavericks)
2. I have Flash Builder 4.7 premium installed on my computer.
3. I have Photoshop CC installed on my computer.
What may be the cause of installation errors?
What do you suggest?
Is there any other version of Extension Builder than I could try to install?

This is not an Adobe error message. Please check your system to rule out any environmental issues such as insufficient hard disk space (2G or so needed after you copied the installer since it will need to unpack some installation files), pending system reboot, download file corrupted etc. then retry installation.

Error during copying of conditions in creating quantity contract

Hi experts,
When am trying to create a condition based on the plant it is displaying an error message "Error during copying of conditions". Please let me know the solutions or any configuration is required.
Regards,
Sunil Kumar.

Please check the condition you have entered, it should be existing conditions.
Regards
Bhavesh Mistry

Error during iTunes 10 installation - iPod Service failed to start

Hi Everyone,
I am getting this error during installation of iTunes 10(Windows XP).
+*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
*Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
1. Right click on "My Computer", select "Properties"
2. Click on the Advanced tab.
3. in the Startup and Recovery section, click the Settings button.
4. Click the Edit byutton to edit your boot.ini file in notepad.
5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

Error during SAP NW73 Installation in Create ICM userstore phase

Similar Messages

Maybe you are looking for