Error during "Save as XML" - SVG Image

Hi,
I am trying to save the book as XML (File à Save as XML), but its showing the attached error (FMError.PNG). FrameMaker created a error log and am pasting its header contents below.
=== Header Begin ===
Internal Error: 9004, 6920492, 9676798, 0
FrameMaker 9.0.0 for Intel
Build: 9.0p237
Window System: MSWindows
Operating System: Windows NT 6.1 (major.minor.build: 6.1.7600 )
Generated on: Wednesday, September 08, 2010 2:14:40 PM
To file: C:\Users\30088130\AppData\Roaming\Adobe\FrameMaker\9\FrameLog_10.09.08_14.14.40.txt
=== Header End ===
This errors occurs only if SVG images are present on the fm files.
Please help me on this.

I just tested with a small sample SVG file (from here:
http://www.w3schools.com/svg/tryit.asp?filename=ellipse1&type=svg )
and FM didn't crash when I did Save as XML. I put the SVG inside an anchored frame.
Could you test using that specific image and see if you get the crash or whether it's OK?
Unfortunately FM did clip the right side of the image when the image is displayed, and also when the image is saved to XML (it was converted to GIF in the export).
Googling for "svg framemaker" brought up some old Framers list references to other issues with FM's SVG handling.
I also notice that in the maker.ini there is a commented out reference to an SVG import filter in the APIClients section:
;SVG Import=FileToFileGFXImport, SVG, FrameImage, SVG, ORBL, SVG, SVG, filters\svgfilter.dll,all,^.svg
SVG Import=FileToFileGFXImport, SVG, PDF, SVG, ORBL, SVG, SVG, filters\svg2pdf.dll,all,^.svg
What it seems to be changing is that the second line will automatically convert SVG to PDF on import, so
you might try the other filter:
save a backup copy of the maker.ini, open the makier.ini in a text editor, then switch the semi-colon to the next line, save, and test to see whether you get any better results.
Have you been able to successfully export any files with SVG, or does the problem only occur with some files?
Also, exactly how are you importing the problem SVG file into FM? Referenced or embedded, is it on a body page, master page, in an anchored graphic frame or not, etc? Do you know what application was used to create the SVG files?
Sheila

Similar Messages

Excel encountered errors during save. however excel was able to minimally save your file to C:\...

Error: Excel encountered errors during save. However, Excel was able to minimally save your file to c:\users\*****\appdata\roaming\microsoft\excel\***.xlsb.
Basically, these are multiple macro enabled spreadsheets from one client. It happens with no other clients who also use macros. They are all saved to our network, which has plenty of space. Any of our users that access these files have the same issue.

Hi
Take following steps to troubleshoot the issue:
Check the Macro and File Blocker settings in the Trust Center.(File>Option>Trust center>Trust center settings)
Then we suggest to perform a clean startup to determine whether background programs are interfering with your Office program.
http://support.microsoft.com/kb/331796
It is recommended that you disable Antivirus application while checking the issue.
Regards
Tylor Wang
TechNet Community Support

Multiplexer error during Save as Disk Image

I'm having this problem occasionally. In this particular case, it has happened twice. The second time the DVD was partially encoded so it did not take so long to fail. The first time it failed after over 12 hours of encoding.
My question is ... I am really pushing the limit on the size of the movie. It is 239:18 minutes. I get no warnings about this being too long. It says it is using 7.6 GB out of 7.7 GB. But could this be an issue?
Does anyone have experience of problems with the size of a DVD file?

I've got close to 4 hours on a DVD before ... maybe
slightly less than this one but not by much. (If I go
over the 4 hour mark then I'll get an error in iDVD
and won't be able to start to save an image file.)
The problem is, iDVD really doesn't know EXACTLY how large the mpg-2 encoded video and multiplexed audio file will be until does it. You may be in that 'gray' region where it thinks your content will probably fit but it won't.

Download error during Save Image As makes Firefox unresponsive

As I too often do, after saving a web page with cmd-S, I mistakenly closed the tab while the page was still "downloading", and as usual, that created the annoying "Download Error" dialog.
(Aside: I use the Mozilla Archive Format 3.0.0 extension, but still, the page is in the cache, so go figure why this error always happens.)
This time, I had moved on to another Save activity, this time Save Image As, from the context menu, in my now-front tab, just as the error dialog appeared.
This combo resulted in having the Download Error in one dialog and the Save Image As dialog both open at the same time, and none of the dialog buttons or available controls would dismiss any of the dialogs. I could press them, I could activate the menus, but Quit was unavailable from the File menu. So Firefox wasn't frozen or unresponsive in that way, but it was stuck. I couldn't get rid of the dialogs or do anything else until they were gone.
I force closed with Activity Monitor.
I realize there was an extension involved, but it still seems like I should have been able to activate the buttons or the close X on at least one of the dialog boxes.
I don't need an answer, but I wanted to tell you about the issue. Thanks.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Creating chart leads in XML Parsing Error: mismatched tag. Expected: /svg

Hello ALL,
I searched this forum but unfortunately I find not a solution for the following use case:
described in steps
1.) create a region with chart (typ = line) -> o.k.
2.) create a sql statement to have data in the chart -> o.k.
3.) running report with this created region and chart -> vizualisation o.k.
3.) create a data picker item ":P21_END_DATE"
4.) replaced the where clause "WHERE a_timestamp >= To_date ('01.02.2007', 'dd/mm/yyyy HH24:MI') -1/24" with WHERE a_timestamp >= To_date (:P21_END_DATE, 'dd/mm/yyyy HH24:MI') -1/24
5.) running report with this created region and chart and data picker item -> vizualisation not o.k. I get the attached error message.
I read already in the forum and knows that the end tag of the svg section is lost put I only changed in my query the described value. Does any body can help me please ??
king regards
XML Parsing Error: mismatched tag. Expected: </svg>.
Location: http://localhost:7777/pls/htmldb/f?p=103:9:8795066316806762442:FLOW_SVG_CHART_R2476324075306576_de
Line Number 22, Column 1455:</style><script xlink:href="/i/javascript/svg_js_includes/svg_common/oracle.svgInit.js"/><script xlink:href="/i/javascript/svg_js_includes/svg_common/oracle.svgNodes.js"/><script type="text/ecmascript"><![CDATA[function svgSync(){window.reload();}function htmldb_Load(){try{oracleSvgInit(evt);throw "old version" }catch(er){}}]]></script><rect id="background" x="1" y="1" width="1022" height="398"/><text x="20" y="20" class="title">Chart 1</text><text id="XAxisTitle" x="50%" y="390">Minute</text><text id="YAxisTitle" x="15" style="writing-mode:lr;" y="200" transform="rotate(-90,15,200)" text-anchor="middle">Messages</text><g id="legend" transform="translate(0,25)"><rect class="legend" x="1" y="0" width="1022" height="60"/><g class="legenditem" transform="translate(20,18)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data1"/><text class="legend" y="0" x="2">ALL</text></g><g class="legenditem" transform="translate(20,36)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data2"/><text class="legend" y="0" x="2">SMS</text></g><g class="legenditem" transform="translate(20,54)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data3"/><text class="legend" y="0" x="2">LL</text></g></g><svg width="1024" height="400" viewBox="-5 -5 1024 400" preserveAspectRatio="none"> <text class="nodatafound" x="40" y="20">No data found.</text><text class="nodatafound" x="40" y="20">no data found</text><text class="nodatafound" x="40" y="20">no data found</text></g></svg><g id="infobubble" transform="translate(0,0)" style="visibility:hidden"><rect id="infobackground" rx="2" ry="2" x="0" y="0" width="100" height="20" fill-opacity=".9" fill="#FFFFFF" stroke="#000000" stroke-width="1"/><text id="infotext" x="5" y="12">-</text></g></svg>
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------^

I found the solution:
No data resulting to the query !!

PARSE_APPLICATION_DATA Error during XML = ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789

Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
Ravi

Hello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi.

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Error during XML = ABAP conversion

Hi
We have a synchronous call from a SRM application through a proxy framework to a vendor http server through XI. The response from the vendor's http server is returned through a custom structure -and is returned through XI back to the calling SRM application.
After receiving the response, the calling SRM application checks for a particular field value of the custom return structure for a error code and sends out an email - accordingly.
Now, the response message comes back from the vendor's server - but the lines of code beyond the synchronous call in the SRM calling application does not get executed ( mail generation part ) I get the following error on the SRM front end - <b>Error in Exchange Infrastructure: Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS00000000000000000001 XML Bytepos.: 39 XML Path: Error Text: System e</b>
Now, this error when occured in our dev environment, I set the extended xml attribute property to 'X' for the synchronous payload in calling SRM application code. The problem is, this error is occuring now in our QA environment inspite of this property being set.
Any ideas/suggestions as to why this message occurs in a standard proxy framework setup ?

Hi,
Please check this link <a href="http://help.sap.com/saphelp_nw04/helpdata/en/0c/402040abf2c442e10000000a1550b0/content.htm"></a>
This talks about having the first element of the xml fragment as X0.
Hope this helps.
Regards,
Smitha.

Error during XML = ABAP conversion, empty tag

Hi.
Im sending data from a Data Base to a proxy using BI.
But when I get an empty response from the data base wich gives me an empty XML tag the proxy shows me an error:
-PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-Error during XML => ABAP conversion (Response Message; error ID: CX_ST_MATCH_ELEMENT;
-System expected the end of the element 'STMT_DC_response'
This is the message that originates the fail:
<?xml version="1.0" encoding="utf-8" ?>
<ns0:MT_PRV23_BS_desg_response xmlns:ns0="urn:tompla-com:xi:ventas_SD">
<STMT_response>
<row>
   <TIPO>P</TIPO>
   <NUM_OT>55062330</NUM_OT>
   <NUM_DESGLOSE>1</NUM_DESG>
   <CANT_DESG>1724000</CANT_DESG>
</row>
</STMT_response>
<STMT_DC_response />
</ns0:MT_PRV23_BD_desg_response>
In case that the tag is filled runs ok
<?xml version="1.0" encoding="utf-8" ?>
<ns0:MT_PRV23_BD_desg_response xmlns:ns0="urn:tompla-com:xi:ventas_SD">
<STMT_response>
   <row>
    <TIPO>P</TIPO>
    <NUM_OT>55062330</NUMERO_OT>
    <NUM_DESG>1</NUM_DESG>
    <CANT_DESG>1724000</CANT_DESG>
   </row>
</STMT_response>
<STMT_DC_response>
   <row>
    <TIPO>P</TIPO>
    <NUMERO_OT>55062330</NUMERO_OT>
    <NUMERO_DESGLOSE />
    <COD_CAR_ADICIONA>8</COD_CAR_ADICIONA>
    <PORC_CAR_ADICION>1</PORC_CAR_ADICION>
</row>
</STMT_DC_response>
</ns0:MT_PRV23_BD_desg_response>
The definition for the data is:
STMT_DC_response        0..1
row                               0..n
    tipo                             0..1
Thanks for the help you can give me about my problem with empty tags.

I moved this question to other forum
Expert Forums » SAP NetWeaver » Exchange Infrastructure

Save to XML: image attribute defined twice

Hello all,
I am saving a structured document to XML and run into an error I cannot explain - or solve: I place graphics inside an anchored frame, which is aligned right with the image centered in the frame. Saving the document to XML generates an error in the log, stating that the 'align' attribute is already used in the image element. The XML shows the following:
<figure Language = "en-US">
<image entity = "image5" impsize = "1.289in 1.478in" impby = "ref"
    sideways = "0" impang = "0.000" xoffset = "2.111in"
    yoffset = "0.000in" position = "below" align = "aright"
    cropped = "1" float = "0" width = "5.512in" height = "1.479in"
    angle = "0.000" nsoffset = "0.000in" align = "left"/>
Does anyone know where the second align attribute (align = "left") comes from ? The Structure Application Developer Guide clearly states that the 'align' attribute is the frame alignment on the page, so the first align attribute is in fact the correct one.
Thanks for any help - I would hate to ship my stuff to my clients when they get ugly errors on saving to XML.
Jang

Hi again,
Disregard the previous post. I found the mistake: the image that was inserted in the anchored frame had an invalid attribute 'align' - that is where the second attribute came from in the XML. Oh well, I should learn to check all options before shooting off a post on this forum. Sorry for the interruption.
Thanks anyway
Jang

How does Firefox handle xml:base when generating GET requests for SVG image elements?

I am loading an SVG image at the following URL:
http://localhost/howl/svg/id/543
The source for this SVG code is:
<svg xml:base="/howl/">
<svg width="535" height="325" xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink">
<image xlink:href="file/id/532" />
</svg>
</svg>
As you can see, the SVG code is located at one path, but the <image> is relative to the root, hence the wrapping xml:base attribute.
The actual requests in Firefox, according to Tomcat Logging are:
GET /howl/svg/id/543
GET /howl/file/id/532
However, Firebug's Net tab shows these requests:
GET /howl/svg/id/543
GET /howl/svg/id/file/id/532 (Incorrect, doesn't happen)
GET /howl/file/id/532
When I test the same thing in Safari and Chrome, all three GET requests actually happen, the incorrect one resolving in a 404.
I suspect that Firefox is generating all three requests, but discarding the incorrect one and Firebug is not aware of this. As a result, Firebug shows all three requests, but the incorrect one never resolves.
So, I'm curious about the behavior or whether I am doing this incorrectly.
Thanks!

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

There was an error during the save process

Hi All,
When I try to save the data in a form, I got the following error but data was saved. Remaing forms are saving the data without any error.
There was an error during the save process
I found the log
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:30 PM]: Rebind at: Sat Jul 04 16:24:30 GMT+03:00 2009
[Jul 4, 2009 4:25:30 PM]: Rebind at: Sat Jul 04 16:25:30 GMT+03:00 2009
[Jul 4, 2009 4:26:30 PM]: Rebind at: Sat Jul 04 16:26:30 GMT+03:00 2009
[Jul 4, 2009 4:27:30 PM]: Rebind at: Sat Jul 04 16:27:30 GMT+03:00 2009
Thanks & regards,
Sravan Kumar.

Hi John,
I customized the standerd Transfer BR according to my requirement. And I am using the customized form.
I tried to change the Action in (Action is smart list) in the form, it is getting saved but with the error There was an error during the save process.
My requirement is Action updated through BR only. But it is not updating. Previously the same BR worked fine.
Is there any relationship between the error and the Action was not updating?
Thanks & Regards,
Sravan Kumar.
Edited by: Kumar1899 on Jul 6, 2009 6:29 AM

Error during the save process with Planning data form

Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/

PARSE_APPLICATION_DATA Error during XML error ID: CX_ST_DESERIALIZATION_ER

Hi All,
Iam Getting the error for Parse Application Data -error ID: CX_ST_DESERIALIZATION_ERROR; Pls check the log file..
xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (; error ID: ; ( )) PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000026 XML Bytepos.: 1465 XML Path: ns1:YMMSTNPSR_FILEUPLOAD(1)STNPSRTAB(1)item(2)MATSTNVAL(24) Error Text: The argument '?007-08-14' cannot be interpreted as a number. Kernel ErrorId: CONVT_NO_NUMBER)) Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000026 XML Bytepos.: 1465 XML Path: ns1:YMMSTNPSR_FILEUPLOAD(1)STNPSRTAB(1)item(2)MATSTNVAL(24) Error Text: The argument '?007-08-14' cannot be interpreted as a number. Kernel ErrorId: CONVT_NO_NUMBER)) An error occurred when deserializing in the simple transformation program /1SAI/TXS00000000000000000026 The argument '?007-08-14' cannot be interpreted as a number.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can u please help me..
Thanks & Regards,
NVR

NVR,
Two things...y date is coming as "?007...." "?" can u pls. check first character in date...
Second are you assigning this value to Number field? number cannot access "-" as a separator...
Please check.
Nilesh

Error during "Save as XML" - SVG Image

Similar Messages

Maybe you are looking for