ERROR DURING SAVING PRODUCTION ORDER

Hi GURUS,
WHILE SAVING A PRODUCTION ORDER I AM GETTING AN ERROR START_FORM,OPEN_FORM MISSING.MSG NO IS TD423
REGARDS
RAMKUMAR WARIYAR

Hi Ram
You might have assigned print shop floor paper while saving prod order in Production Scheduling profile. .
You might not have defined output printer for this. If you want paper to print, set printer for this. Also check have you assgined order type in scheduling profile at the bottom for MTS, MTO, Rework. Order type for production order is picked from scheduling profile.
Check this order is the one which you are using.
If you do not want to print shop floor paper remove the tick.
Regards
J . Saravan
Edited by: J. Saravanan on Apr 10, 2008 6:29 AM
Edited by: J. Saravanan on Apr 10, 2008 6:30 AM

Similar Messages

Error while saving Production Order

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved.

Error during creting Production Order

Hi Experts
Im trying to create manual production order for FIN material through CO01, but comes with the screen to enter sales order& WBS !. Is there a settings to controll this?
I dont want to reference any Sales order or with WBS to create Production order, I just want to create Manual production order without any refernce, so could u pls advice for this?
Rgds
Ram

Hii,
In Co01 create Production order w.ref to Production order type and material. Ensure whether u have maintianed Routing and the relevant production versons. In OPL8 check for Selection ID and TL type assigned wr,t to Plant and Order type. Check for Production scheduling profile maintained in Wrk sch view of mat mst.
Edited by: Lokesh K on Sep 8, 2010 1:25 PM

How can serial numbers be produced during creating production orders???

In our company，the basic manufacture process are as follows:
1.CO01 Create production order
2 MB1A Goods issue to production order
3 CO11N Produciton order confirmation
4 MB1A Goods Receive
For some finished product with serial number management, when doing MB1A goods receive ,we
will input the serial numbers into the SAP for the first time.That means the serial numbers
was produced when doing MB1A.
But for some reasons,we wish when we create a production order,the serial numbers can be
produced for the finished product.That means we will release a production order,the serial
numbers can be produced for the finished product of the production order,can be auto
produced or by input manually.
We do not want the the serial numbers to input into the SAP until doing MB1A.
What can we do to produce the the serial numbers for the first time after release a
production order?
How can serial numbers be produced during creating production orders?
Thanks very much for any reply!!

You should configure the SN profile to allow that the order can be released w/o SN;
but... for the other issues, we have used and user exit that - after saving the order - generates a SN according to a given logic.
We could not fina dan easy way of creating the SN after relasing the order or when doing the GI.
Regards

Base unit of measurement while saving production order

Hi
While saving production order I am getting following problems:
"Material has no base unit of measure"
Whereas UOM is there, I also can see that as soon as I enter qty while creating the order. System automatically prompts the UOM.
I also donot find any problem in MRP run, planned order creation etc
So what can be the problem?
Edited by: BNR on Nov 24, 2008 5:22 AM

Dear,
It may be data base problem as you are getting this problem fequently so please check with Basis person.
Have you defined the any production unit in both material master WS view & in routing or any other alternative unit of measurement please check?
Regards,
R.Brahmankar

Error during saving a multipart message

Hi All,
We are currently integrating third party system with SAP ECC as a part of our FICA implementation.
We have configured soap adapter initially at the sender side and IDoc adapter at the reciever intially. After looking at the performnace of the soap adapter, we thought of using HTTP sender instead of a soap sender, so that the webservice makes a direct call to PI integration engine instead of Adapter engine.
Now my scenario looks like.
Java/J2EE client -> webservice call > XI pipeline>SAP.
So here , i havent used http adapter at the source side.
My problem is when i call the XI pipleine url as suggested by the below blog
<a href="/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine Soap Inbound channel of the Integration engine</a>
I am getting the follwoing error as seen below
<b>May 31, 2007 6:05:50 PM com.sun.xml.messaging.saaj.soap.MessageImpl saveChanges
</b>
<b>SEVERE: SAAJ0540: Error during saving a multipart message</b>
But for my scenario, i havent used any soap with attachments to pass through PI.
My soap message is a simple soap envelope with soap part-message.(body).
Please do help me out in resolving this issue.
Thanks & Regards,
Dhana
null

Hi Steve,
My Soap Action is already applied and I traced out few options after googling it up and added few jars (xalan.jar and saxon8.jar). Even now I am getting the same error.
Please do tell me what to do in this regard.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SAP:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Soap Error message:Error during conversion of XI message
Thanks,
Dhana

How to ignore error during saving?

I got the following error during saving:
It appears every time when i save the ai file,
how can I ignore it?

I just got the font from fonts101.
does not seem to have any embedding issues for me...

Regd : Error during saving the sales order for Variant configuration

Hi -
When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
Any solutions regarding the error.

Hi,
This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
So you can maintain the above settings compulsory.
please let me know any clarification.
Regards,
Mohan

Update error while creating production order (TCODE CO01)

Hello,
We have created new plant into development server for testing. We have created production Order few days back at that time we have not faced any problem. But from last two days , when we create new production Order , system gives following error:
ORA-00947: not enough values
DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB
SAPLCOVB" or "LCOVBF10"
HEADER_POST"
and
Update was terminated
System ID....   DEV
Client.......   500
User.....   HPLSU
Transaction..   CO01
Update key...   4B6E4F48C08D027FE1008000C0A802F3
Generated....   08.02.2010, 10:35:48
Completed....   08.02.2010, 10:35:49
Error Info...   00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Our work is held up.
Please also note that If we increase the QTY in the existing Order ( already created few days back) , System accept the same and Order is saved.
We are looking for the solution for the above.
Early reply will be highly appreciated.
thanks
harish

Hi Rishi,
You better check with your BASIS team.
Check this link also
Supervisor Error ADM0015
Regards,
Satyajit Kumar
Edited by: Satyajit Kumar on Feb 8, 2010 7:47 AM

Error while saving Prod order - "Class for order classification"

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved

Error when creating Production Order

Dear All,
When i was trying to create Production Order using CO01, there was an error message that says "error when calculating cost, see log, log is deleted when saving"
what is the problem from that error message? how can i solve this problem?
best regard,
MARUFAT

Cost consist of material cost which are the direct cost, it is calculated from the component and the material itself for which the order is created. If the material is semifinished or finished check whether the accounting view for these material contains value. These material could be costed as per the method mentioned by our friend or you may enter value through MR21 (if the material is not costed atall since it is created). It is recommended to update cost through costing run and by CO member. Now if the material is Raw material you need to maintain PIR.
The second part could be the activity cost. These follows from the routing/receipe. Mostly the costing error is due to the inappropriate defination of either cost center or activity types. You need to confirm whether activity price are define for the period.
Appriciating you for taking a concern on the costing error and not overriding.

Error in creating Production order

When I create production order thorugh planned order Iam getting error message "No objects selected inside production order."

Hello,
The planned order that you may have use has been deleted already. It is most probably deleted during an MPS/MRP run. The planned order number is deleted and recreated with a different number. Please try to check in MD04 and check the planned orders there and you can convert it from there.
Thanks,
Ernesto

Cost calculation error while creating production order

Hi, "version 0 is not defined in controlling area xxxx for the fiscal year 2008, maintain the fiscal area dependent version parameters for the version o".the above error message appears at the time of saving my production order with co01 t-code. i have tried to rectify this by okez t-code, but it gives message that "activation of the indicator is notallowed". the same message appears while releasing the order, while doing the GI . Pls suggest.

Hi,
Please refer the below thread.
https://forums.sdn.sap.com/watches!add.jspa?forumID=144&threadID=484386
Regards,
Senthilkumar

Run Time Error on Saving Sales Order

Hello,
We are facing problem when saving sales order. When order is created and save button is pressed, it saves sales order and gives Order Number. But while saving the order during update it gives dump due to Data duplication in VBFA while inserting data to VBFA table
Looking at ST22 log this error is in form VBFA_BEARBEATEN
Kindly guide.
Thanx in advance.
Regards

Check the Sales Order Number Range.
It seems either the Number Range is exhausted (completed) or a document with same number is already created in system in past...
Hope this helps,
Thanks,
Jignesh Mehta

Error - Cannot Create Production Order

We have been attempting to create a production order using newly created work centers but keep getting this error. We've tried changing various values, but the same error comes up regardless. Does anyone what it means? Any help would be appreciated.

Hello,
The planned order that you may have use has been deleted already. It is most probably deleted during an MPS/MRP run. The planned order number is deleted and recreated with a different number. Please try to check in MD04 and check the planned orders there and you can convert it from there.
Thanks,
Ernesto

ERROR DURING SAVING PRODUCTION ORDER

Similar Messages

Maybe you are looking for