Error during search for movement type (953)

Hi All,
         When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers >  define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

Similar Messages

  • Error during search for WM movement type (999   E  )

    Dear ALL,
    I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
    "Error during search for WM movement type (999   E  )"
    Could someone help me please ?
    Thanks & Best regrads,
    Saiful arif

    Hi,
    Please check the reference  movement type  in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
    For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
    for  qty updation indicator not checked, you will have reference movement type 999
    qty updation indicator checked means stock / quantity controlled in which case
    check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
    then check for WM movement 3YY in Transaction OMLJ which should have source storage  type maintained.
    qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR,  moreover it is no stock / qty and no stock transfers situation
    If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
    Please note 999 as WM movement  is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
    Hope this should solve your problem.
    Regds
    Shrihari

  • Error during search for WM movement type (911)

    Hi gurus,
    I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
    "Error during search for WM movement type (911)"
    any idea of this message?
    Thanks in advance

    The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
    Lakshman

  • Error during search for WM movement type (652 1 L   )

    Hi Guys,
    For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
    Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
    Error during search for WM movement type (652 1 L   )
    Please reply ASAP,it's very urgent
    Regards,
    Kiran

    insert this entry, it will work.
    regards,
    Yu

  • WM-Error during search for WM movement type (261 )

    HI FRIENDS
               I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
               PLS SUGGEST ME TO SOLVE THIS ISSUE
    Error during search for WM movement type (261 )
    Message no. L9 005
    Diagnosis
    A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
    In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
    Procedure
    Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
    WIHT REGARDS
    DINESH

    Hi,
    The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261  and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
    And also .....
    Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

  • Searching for Movie Types in iTunes

    I would like to search for surfing movies in ITunes but it isn't possible to search for a movie by subject in iTunes the way that I can with tv shows. Am I missing something or should I continue to get my surf movies from Netflix?

    You can browse movies by category (though there's not a category for "surf") but there's no way to search for them, only by Title, Actor, Director, Producer, or Year.

  • Frequent "Searching for Movie Data in File ..." errors

    OK, I searched the forums for this but didn't find anything, so don't nobody jump down my throat please ...
    I very often find myself, when trying to export a file through QuickTime conversion, confronted with the error message "Searching for Movie Data in File [XXX - 0000000008]" which FCP invariably cannot find. I go to look in my capture drive myself, and sure enough, no file exists of that name. Without the file in question, FCP won't run the conversion. I get around it by exporting directly to QT, opening that file in QT Pro and re-exporting, but what the he11 is FCP doing in the first place? Why is it making all these files then losing/destroying them?
    Help very much appreciated. Running FCP 4.5 HD; rest of specs in profile.
    Thanks!

    Without being able to see your project's history, I can only surmise you have created some copies of some clips and then tossed the originals. Or used reference movies that point to renamed clips. Or you've renamed some clips but used a differently-named copy of it. You may have copied a clip from one project and placed into another and then later discarded the source media.
    I get around it by exporting directly to QT, opening that file in QT Pro and re-exporting, but what the he11 is FCP doing in the first place? Why is it making all these files then losing/destroying them? < </div>
    That's because the original source media is always required for Compressor's operations. You see copies and renders in the timeline but Compressor will always recreate fresh media so looks for the sources.
    This problem is almost always a user error, though it is not easily debugged from where I'm sitting. It is caused by a few subtle misperceptions about nesting and copying clips from one project to another without taking the source media with them.
    Sorry not to be more definitive, I'd need to have watched you work for several hours to know what's going on with this.
    bogiesan

  • Searching for movie data in file Name-FIN-00000001

    While starting up FCP (6.0.6) gives an error message "Searching for movie data in file Name-FIN-00000001".
    After 10 to 20 min FCP will start up.
    How do I get rid of this annoying error message when starting up?
    Thanks W.

    As Jim says, this is a render file. However, simply rendering it won't fix this. What is causing this error is a QT reference movie in the project. When you export a QT movie, and make don't make it self contained, it is a reference movie that references media files and render files. When a render file is deleted (FCP does this automatically when the render file is no longer needed) then the refrerence movie can no longer function... one file it references is gone. Simply re-rendering won't fix it, because it is referencing that SPECIFIC render file.
    You need to find and delete the QT Reference movie from your project.
    Shane

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

    Hi Guys,
    I am currently facing some issues with respect to the deliver creation.
    The scenario is somthing like this.
    I have assigned a FOC Item category to an Consignment Issue order type.
    The system is able to determine the Item category successfully.
    However when the delivery is created it throws an error message
    'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
    Not sure why this occurs.
    All the settings seem to be set.
    If any one of you can help me out it would be great.
    Thanks.
    Regards,
    Pandi

    Dear Pandiraj
    The standard process is that consignment issue order should be created with reference to Proforma invoice.  Having said that I dont understand why you have assigned a FOC item category to issue order.  Not sure, whether this will work.  Also I feel that you should explain in detail the process for which you are configuring this.
    thanks
    G. Lakshmipathi

  • Error while determining ref.mov.type for WM via table 156S:601///

    Hi SAP gurus
    while doing delivery i am getting error like
    Error while determining ref.mov.type for WM via table 156S:601///
    please give me needful solution
    regards
    Sarvesh

    Chk via
    SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
    maintina the correspoding entries..
    BR,
    Krishna

  • Error in MB1C but works perfectly in MIGO for movement type 501.

    Hi
    I get an error in MB1C but works perfectly in MIGO for movement type  501
    here is the error Account 353300 requires an assignment to a CO object.
    I know for this if we add the co object in OKB9 it works.
    But my question is - how it works in MIGO transaction but throws an error in MB1C
    Any idea ? has any one faced this kind of an issue ? Please let me know.
    Thanks
    Dkmurthy

    Hi
    Are the entires same in both the transactions? Means did you check 353300  GL was hit when you posted through MIGO?
    Check in FS00 - for GL account 353300 - under bank/interest tab - double click on field status variant -> under Additional account assignments - CO object is ticked as mandatory?
    Thanks

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • Steady Stream of "Searching for movie data in the file..." Error Messages

    My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
    I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
    Once in a while, iMovie will ask for a different movie file, with the same problem.
    Any ideas?

    I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
    I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past?

Maybe you are looking for