Error during SID assignment for characteristic 0REQUID (current value 3)

Hi Gurus,
While loading Master data for a characterisitc, I am getting above error as soon as I selects the schedule start.
Can somebody help me and give some hints on what setting needs to be done.
Regards,
Manoj

Hi RMP,
Thanks for the hint.
Current problem solved by maintaining the number range properly.
Regards,
Manoj

Similar Messages

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

In DP50 Error during material determination for service order

Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
Mohit

Hi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam

SID 0 for characteristic ZGRP_DIV could not be converted CL_RSDM_READ_MASTER_DATA- _SIDVAL_DIRECT_READ2

Hi
A 2 infocube containing multiprovider based query have following error when I select infoobjects from both infocubes:
SID 0 for characteristic ZGRP_DIV could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
An error occurred when getting data from the processor.
>> Row: 29 Inc: LRRK0F00 Prog: SAPLRRK0
ABAP DEBUGGER's screen shot also attached.

Hi
Thanks it works but only one infocube's 50% infoobjects giving this error, Why?
2nd is infoobject A,B & C are common in both InfoCubes but A has unique records only
so the query result have 2 row for each record like following:
A   B                  C           D              E
11 10               ASD   Not Assign     PRN
11 Not Assign ASD   Account         Not Assign
12 20               LHR   Not Assign     CRT
12 Not Assign LHR    Payment       Not Assign
13 30               KHI    Not Assign     SCN
13 Not Assign KHI    Dispatch        Not Assign
How can I resolve it?

Error message "ABAP/4 error during dynamic assign" on Contact Log creation.

Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
Ankur

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

ABAP/4 error during dynamic assign beyond program bounds

Hi experts,
after an Upgrade from 4.7 to Ecc 6.0, launching transaction AC03 an error (green light) occours "ABAP/4 error during dynamic assign beyond program bounds".
Is there anyone who find a solution?
regards
andrea brescia
Edited by: andrea brescia on Nov 30, 2010 1:42 PM

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

Hi,
I am facing the problem in IR .
Internal error during bean lookup for bean RepObjectAccessBean
is the Error window I am getting frequently, After getting this error, It is no allowing to open any of the IR Objects.
Thanks in advance,
Dhanabal T

Hi Dhanabal,
i got the same error. But it is clear.
Please chek once ur configuration part. The error is in configuration part only.
once check all the steps in ur configuration part.
REgards,
chandra.

Error in account assignment for item

Hello,
We have configured EBP at Stack 03 in SRM release 550
We are facing problem to create shopping cart,
Already it was working fine but now at the time of adding item to shopping cart it shows below error
messages
1.Version 0 is not defined for fiscal year 2007
2.Error in account assignment for item
For your reference error screen is given in attached document.
pls advise
Regards,
Santosh

Hi Christophe,
I am getting the same error 'Version 0 is not defined for fiscal year 2007' when tried to create a Sales Order in IDES system and I am trying the solution to add the fiscal year 2007 in T.code OKEV but it fails.
The steps what I have done :
1. Go to OKEV
2. Selecting control area 1000
3. Selecting the version 0 line
4. then trying to open the Settings for Each fiscal year from Dialog Structure
The error i get is :
E: Activation of the indicator is not permitted
and the highlighted line in red is for Version 1
The default indicator is set for version 1 is Plan, WIP/RA, Variance & Legal Valuation (Valuation view)
I tried in many ways to 'uncheck' the boxes for this version 1 but fails.
Pls help.
regds,
Umesh

Error during availability check for order

Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM Consultant

Hi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju

Red error: No SID found for value 'BTL ' of characteristic 0BASE_UOM

Loading 0FI_GL_4 data from R3, get some red erros, the 1st error is:
No SID found for value 'BTL ' of characteristic 0BASE_UOM
Check the above red error details:
Diagnosis
     Characteristic value BTL does not exist in the master data table of
     characteristic 0BASE_UOM . Therefore, this value could not be
     transformed into the internal SID.
System response
Procedure
     Check whether the value is correct or not. If it is correct, you need to
     generate the associated master data. Note: For characteristics
     0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
     fiscal year variant (see table T009). In addition, there must be units
     in table The value for 0FISCPER must be valid according to the fiscal
     year variants. This means that only the periods 0 to (no. of normal
     periods + special periods) are allowed. If the fiscal year variant is
     year-dependent, then only the periods defined for the corresponding year
     are valid. You can make these settings in Customizing in the activity
     Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
     note that the units must be of
     Units that refer to 0UNIT must be available in table T006, and
     currencies that refer to 0CURRENCY in table TCURC. Note that the units
     must be available in internal format. Owing to the presence of a
     conversion exit in field MSEHI of table T006, you are only able to see
     the internal format if you deactivate this exit. ( Settings > User
     Parameters > Tab DataBrowser > Consider Conversion exit must not be
     set). Also take a look at note no. 619987.
Procedure for System Administration
Any idea to resolve the loading problem?
Thanks

Kevin,
   what ever it may be the source system, if T006 Table contains BTL, that sloves your problem.
try load data once again. please update the thread after loading.
all the best.
Regards,
Nagesh Ganisetti.

Data Load Error: No SID Found for value.....

Hi,
I'm loading data for 0REFX_C01-Conditions Cube (Real Estate). Load Fails & error message is "Record 1 :No SID found for value 'IB20010000777700000001 ' of characteristic 0REOBJECT". Master data for 0REOBJ_ATTR & 0REOBJ_TEXT has already been loaded.
Description of Error:
Characteristic value IB2001000077770000 does not exist in the master data table of characteristic 0REOBJECT. This value could not be be transformed into the internal SID.
Could someone help me resolve this issue??
Thanks in advance. Points will be rewarded.

The record is coming from your source system. The reason why it's not in your Master Data can be either because it's new Master Data (created since last time you loaded) or a wrong input in the source system.
Either way, the answer is in your source system, so make sure this definition exists there and its a valid value.
If it is, try to load and activate your master data again and then load the cube once more.
Regards,
Luis

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Account determination error during service entry for service PO

Dear Experts,
This about service PO. I created PO # 4501517101 & wanted to perform service entry via t/code ML81N. But I'm getting error "147 Account determination for entry OP01 FR1 OP01 not possible"
Appreciate if could anyone assist me on this issue. TQ.
rgds,
nantha

Please correct the assignment in OBYC and also in this error itself u can see one icon of proceed.If you will click on Proceed, then it will take u in to OBYC, where u have to do the corrections.

Error during TREX indexing for WPC content

Hello,
I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
thanks
Jaish
[3508] 2008-08-11 15:19:19.842     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
[3508] 2008-08-11 16:39:06.196     e     preprocessor     Preprocessor.cpp(01167) :     HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
[3508] 2008-08-11 16:39:06.212     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)

there was problem with Index creation the way I was creating it.

Error during installing nw2004s for pi

hi,
i got the following error during create oracle database step in installing nw2004s
i am tring to install PI70(02) on same machine which i already installed solution manager(00,01)
i already patched oracle database as 10.2.0.2 and i am using loopback adapter
ERROR 2006-11-06 08:56:25
CJS-00084 SQL statement or script failed. DIAGNOSIS:
Error message: ORA-32004: obsolete and/or deprecated parameter(s)
specifiedORACLE
AI½ºAI½º°¡ ½AAUμC¾u½A´I´U.
ERROR 2006-11-06 08:56:25
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException:
error text undefined.
ERROR 2006-11-06 08:56:25
FCO-00011 The step createDatabase with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost
ind
ind
ind
ind
3
0
NW_CreateDB
ind
ind
ind
ind
10
0
NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain
ind
ind
ind
ind
0
0
NW_OraDBStd
ind
ind
ind
ind
3
0
NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status
ERROR .
regards;
Dennis

Hi Dennis,
Check the alert_<SID>.log in your installation. Check if the error is shown there. The log file will show the obsolete parameter. In my case it was 'enqueue_processes'. Comment this parameter and save the init<SID>.ora file and click 'Retry' button.
The create Database phase should continue.
Award points if the solution is suitable.
Thanks & Regards,
Abhijit Deshpande

Error during SID assignment for characteristic 0REQUID (current value 3)

Similar Messages

Maybe you are looking for