Error during solution activation
Hi gurus,
I have been trying to activate a baseline solution for china (UTL_CN_1603) but each time I try it always give me this error :
ECATT /SMB12/V_TCN41_O001 in BB 884 (CN) of scenario CN_884 not exist in system.
Please what do I do? I have gone through many threads on this forum on this where people said the missing ecatt is usually attached to oss notes, but how can I know the specific oss note. Please I need answers as this is my first SAP activation and am really looking forward to the next stage but this error have plagued me for three days now. Thanks.
Hi,
Pls check if ECAT file placed in correct path , have correct permission required (read, write ,execute) ?
Regards,
Similar Messages
-
Problem during IS-OIL activation transport: "ERROR during DD ACTIVATION"
Dear All,
On Development system, is-oil was previously activated with SFW5
transaction (notes 908007, 874541); afterwards transport was created on
development system and imported on the production system, but
unsuccessfully!
On Production system, we have the following errors on file SLOG0847.GP6:
ERROR: stopping on error 12 during DD ACTIVATION
ERROR: stopping on error 12 during MOVE NAMETABS
Please have a look to the following logs to have a complete view of the problem.
Could you suggest a solution for this problem?
Additionally, a very important question is:
Is it necessary activate IS-OIL with transport in the live system,
or is it possible activate it manually?
Thanks for your cooperation,
Dario Ricci
File SLOG0847.GP6
START imp single GP6 20081118155636 ZRTC4_TM_ADM ensv15xe 20081118155602
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118155602
START MOVE NAMETABS GP6 6 20081118155648 ZRTC4_TM_ADM ensv15xe 20081118155602
START tp_getprots GP6 P 20081118155649 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP tp_getprots GP6 P 20081118155705 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP MOVE NAMETABS GP6 6 20081118155705 ZRTC4_TM_ADM ensv15xe 20081118155602
START MAIN IMPORT GP6 I 20081118155705 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP MAIN IMPORT GP6 I 20081118155728 ZRTC4_TM_ADM ensv15xe 20081118155602
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118155602
START SET VERSION FLAGS GP6 V 20081118155730 ZRTC4_TM_ADM ensv15xe 20081118155602
START tp_getprots GP6 V 20081118155730 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP tp_getprots GP6 V 20081118155741 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP SET VERSION FLAGS GP6 V 20081118155741 ZRTC4_TM_ADM ensv15xe 20081118155602
START GENERATION OF REPORT GP6 G 20081118155741 ZRTC4_TM_ADM ensv15xe 20081118155602
START tp_getprots GP6 G 20081118155742 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP tp_getprots GP6 G 20081118155752 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP GENERATION OF REPORT GP6 G 20081118155752 ZRTC4_TM_ADM ensv15xe 20081118155602
STOP imp single GP6 0000 20081118155752 ZRTC4_TM_ADM ensv15xe 20081118155602
START imp single GP6 20081118155954 ZRTC4_TM_ADM ensv15xe 20081118155953
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118155953
START MOVE NAMETABS GP6 6 20081118155954 ZRTC4_TM_ADM ensv15xe 20081118155953
START tp_getprots GP6 P 20081118155954 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP tp_getprots GP6 P 20081118155958 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP MOVE NAMETABS GP6 6 20081118155958 ZRTC4_TM_ADM ensv15xe 20081118155953
START MAIN IMPORT GP6 I 20081118155958 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP MAIN IMPORT GP6 I 20081118160006 ZRTC4_TM_ADM ensv15xe 20081118155953
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118155953
START SET VERSION FLAGS GP6 V 20081118160006 ZRTC4_TM_ADM ensv15xe 20081118155953
START tp_getprots GP6 V 20081118160006 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP tp_getprots GP6 V 20081118160010 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP SET VERSION FLAGS GP6 V 20081118160010 ZRTC4_TM_ADM ensv15xe 20081118155953
STOP imp single GP6 0000 20081118160010 ZRTC4_TM_ADM ensv15xe 20081118155953
START imp single GP6 20081118160242 ZRTC4_TM_ADM ensv15xe 20081118160240
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118160240
START MOVE NAMETABS GP6 6 20081118160244 ZRTC4_TM_ADM ensv15xe 20081118160240
START tp_getprots GP6 P 20081118160244 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP tp_getprots GP6 P 20081118160247 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP MOVE NAMETABS GP6 6 20081118160247 ZRTC4_TM_ADM ensv15xe 20081118160240
START MAIN IMPORT GP6 I 20081118160247 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP MAIN IMPORT GP6 I 20081118160252 ZRTC4_TM_ADM ensv15xe 20081118160240
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118160240
START SET VERSION FLAGS GP6 V 20081118160253 ZRTC4_TM_ADM ensv15xe 20081118160240
START tp_getprots GP6 V 20081118160253 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP tp_getprots GP6 V 20081118160256 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP SET VERSION FLAGS GP6 V 20081118160256 ZRTC4_TM_ADM ensv15xe 20081118160240
START EXECUTION OF REPORTS GP6 R 20081118160256 ZRTC4_TM_ADM ensv15xe 20081118160240
START tp_getprots GP6 R 20081118160256 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP tp_getprots GP6 R 20081118160333 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP EXECUTION OF REPORTS GP6 R 20081118160333 ZRTC4_TM_ADM ensv15xe 20081118160240
STOP imp single GP6 0000 20081118160333 ZRTC4_TM_ADM ensv15xe 20081118160240
START imp single GP6 20081118160502 ZRTC4_TM_ADM ensv15xe 20081118160458
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118160458
START MOVE NAMETABS GP6 6 20081118160503 ZRTC4_TM_ADM ensv15xe 20081118160458
START tp_getprots GP6 P 20081118160503 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP tp_getprots GP6 P 20081118160519 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP MOVE NAMETABS GP6 6 20081118160519 ZRTC4_TM_ADM ensv15xe 20081118160458
START MAIN IMPORT GP6 I 20081118160519 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP MAIN IMPORT GP6 I 20081118160551 ZRTC4_TM_ADM ensv15xe 20081118160458
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118160458
START SET VERSION FLAGS GP6 V 20081118160552 ZRTC4_TM_ADM ensv15xe 20081118160458
START tp_getprots GP6 V 20081118160552 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP tp_getprots GP6 V 20081118160604 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP SET VERSION FLAGS GP6 V 20081118160604 ZRTC4_TM_ADM ensv15xe 20081118160458
START EXECUTION OF REPORTS GP6 R 20081118160605 ZRTC4_TM_ADM ensv15xe 20081118160458
START tp_getprots GP6 R 20081118160605 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP tp_getprots GP6 R 20081118160628 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP EXECUTION OF REPORTS GP6 R 20081118160628 ZRTC4_TM_ADM ensv15xe 20081118160458
STOP imp single GP6 0000 20081118160628 ZRTC4_TM_ADM ensv15xe 20081118160458
START imp single GP6 20081118160804 ZRTC4_TM_ADM ensv15xe 20081118160804
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118160804
START MOVE NAMETABS GP6 6 20081118160805 ZRTC4_TM_ADM ensv15xe 20081118160804
START tp_getprots GP6 P 20081118160805 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP tp_getprots GP6 P 20081118160808 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP MOVE NAMETABS GP6 6 20081118160808 ZRTC4_TM_ADM ensv15xe 20081118160804
START MAIN IMPORT GP6 I 20081118160808 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP MAIN IMPORT GP6 I 20081118160810 ZRTC4_TM_ADM ensv15xe 20081118160804
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118160804
START SET VERSION FLAGS GP6 V 20081118160810 ZRTC4_TM_ADM ensv15xe 20081118160804
START tp_getprots GP6 V 20081118160810 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP tp_getprots GP6 V 20081118160813 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP SET VERSION FLAGS GP6 V 20081118160813 ZRTC4_TM_ADM ensv15xe 20081118160804
START EXECUTION OF REPORTS GP6 R 20081118160813 ZRTC4_TM_ADM ensv15xe 20081118160804
START tp_getprots GP6 R 20081118160813 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP tp_getprots GP6 R 20081118160814 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP EXECUTION OF REPORTS GP6 R 20081118160814 ZRTC4_TM_ADM ensv15xe 20081118160804
STOP imp single GP6 0000 20081118160814 ZRTC4_TM_ADM ensv15xe 20081118160804
START imp single GP6 20081118160940 ZRTC4_TM_ADM ensv15xe 20081118160940
START DD IMPORT GP6 H 20081118160940 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP DD IMPORT GP6 H 20081118160947 ZRTC4_TM_ADM ensv15xe 20081118160940
START DD ACTIVATION GP6 A 20081118160947 ZRTC4_TM_ADM ensv15xe 20081118160940
START tp_getprots GP6 J 20081118160947 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP tp_getprots GP6 J 20081118161103 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP DD ACTIVATION GP6 A 20081118161104 ZRTC4_TM_ADM ensv15xe 20081118160940
START DISTRIBUTION OF DD-O GP6 S 20081118161104 ZRTC4_TM_ADM ensv15xe 20081118160940
START tp_getprots GP6 S 20081118161104 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP tp_getprots GP6 S 20081118161107 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP DISTRIBUTION OF DD-O GP6 S 20081118161107 ZRTC4_TM_ADM ensv15xe 20081118160940
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118160940
START MOVE NAMETABS GP6 6 20081118161107 ZRTC4_TM_ADM ensv15xe 20081118160940
START tp_getprots GP6 P 20081118161107 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP tp_getprots GP6 P 20081118161113 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP MOVE NAMETABS GP6 6 20081118161113 ZRTC4_TM_ADM ensv15xe 20081118160940
START MAIN IMPORT GP6 I 20081118161113 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP MAIN IMPORT GP6 I 20081118161115 ZRTC4_TM_ADM ensv15xe 20081118160940
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118160940
START SET VERSION FLAGS GP6 V 20081118161115 ZRTC4_TM_ADM ensv15xe 20081118160940
START tp_getprots GP6 V 20081118161115 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP tp_getprots GP6 V 20081118161116 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP SET VERSION FLAGS GP6 V 20081118161116 ZRTC4_TM_ADM ensv15xe 20081118160940
STOP imp single GP6 0000 20081118161117 ZRTC4_TM_ADM ensv15xe 20081118160940
START imp single GP6 20081118161224 ZRTC4_TM_ADM ensv15xe 20081118161224
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118161224
START MOVE NAMETABS GP6 6 20081118161224 ZRTC4_TM_ADM ensv15xe 20081118161224
START tp_getprots GP6 P 20081118161225 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP tp_getprots GP6 P 20081118161226 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP MOVE NAMETABS GP6 6 20081118161226 ZRTC4_TM_ADM ensv15xe 20081118161224
START MAIN IMPORT GP6 I 20081118161226 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP MAIN IMPORT GP6 I 20081118161239 ZRTC4_TM_ADM ensv15xe 20081118161224
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118161224
START SET VERSION FLAGS GP6 V 20081118161240 ZRTC4_TM_ADM ensv15xe 20081118161224
START tp_getprots GP6 V 20081118161240 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP tp_getprots GP6 V 20081118161241 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP SET VERSION FLAGS GP6 V 20081118161241 ZRTC4_TM_ADM ensv15xe 20081118161224
START EXECUTION OF REPORTS GP6 R 20081118161241 ZRTC4_TM_ADM ensv15xe 20081118161224
START tp_getprots GP6 R 20081118161241 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP tp_getprots GP6 R 20081118161318 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP EXECUTION OF REPORTS GP6 R 20081118161318 ZRTC4_TM_ADM ensv15xe 20081118161224
STOP imp single GP6 0000 20081118161318 ZRTC4_TM_ADM ensv15xe 20081118161224
START imp single GP6 20081118174057 ZRTC4_TM_ADM ensv15xe 20081118174057
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118174057
START MOVE NAMETABS GP6 6 20081118174057 ZRTC4_TM_ADM ensv15xe 20081118174057
START tp_getprots GP6 P 20081118174057 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP tp_getprots GP6 P 20081118174058 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP MOVE NAMETABS GP6 6 20081118174058 ZRTC4_TM_ADM ensv15xe 20081118174057
START MAIN IMPORT GP6 I 20081118174059 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP MAIN IMPORT GP6 I 20081118174100 ZRTC4_TM_ADM ensv15xe 20081118174057
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118174057
START SET VERSION FLAGS GP6 V 20081118174100 ZRTC4_TM_ADM ensv15xe 20081118174057
START tp_getprots GP6 V 20081118174100 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP tp_getprots GP6 V 20081118174101 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP SET VERSION FLAGS GP6 V 20081118174101 ZRTC4_TM_ADM ensv15xe 20081118174057
STOP imp single GP6 0000 20081118174101 ZRTC4_TM_ADM ensv15xe 20081118174057
START imp single GP6 20081118174102 ZRTC4_TM_ADM ensv15xe 20081118174102
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081118174102
START MOVE NAMETABS GP6 6 20081118174102 ZRTC4_TM_ADM ensv15xe 20081118174102
START tp_getprots GP6 P 20081118174102 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP tp_getprots GP6 P 20081118174103 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP MOVE NAMETABS GP6 6 20081118174103 ZRTC4_TM_ADM ensv15xe 20081118174102
START MAIN IMPORT GP6 I 20081118174103 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP MAIN IMPORT GP6 I 20081118174104 ZRTC4_TM_ADM ensv15xe 20081118174102
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081118174102
START SET VERSION FLAGS GP6 V 20081118174104 ZRTC4_TM_ADM ensv15xe 20081118174102
START tp_getprots GP6 V 20081118174104 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP tp_getprots GP6 V 20081118174106 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP SET VERSION FLAGS GP6 V 20081118174106 ZRTC4_TM_ADM ensv15xe 20081118174102
START EXECUTION OF REPORTS GP6 R 20081118174106 ZRTC4_TM_ADM ensv15xe 20081118174102
START tp_getprots GP6 R 20081118174106 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP tp_getprots GP6 R 20081118174109 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP EXECUTION OF REPORTS GP6 R 20081118174109 ZRTC4_TM_ADM ensv15xe 20081118174102
STOP imp single GP6 0000 20081118174109 ZRTC4_TM_ADM ensv15xe 20081118174102
START imp single GP6 20081120123017 gp6adm ensv15xe 200811201230160076ef
START DD IMPORT GP6 H 20081120123017 gp6adm ensv15xe 200811201230160076ef
STOP DD IMPORT GP6 H 20081120123019 gp6adm ensv15xe 200811201230160076ef
START DD ACTIVATION GP6 A 20081120123019 gp6adm ensv15xe 200811201230160076ef
START tp_getprots GP6 J 20081120123019 gp6adm ensv15xe 200811201230160076ef
ERROR GD6K902991 GP6 A 0012 20081120124325 SUPTECENI gp6adm ensv15xe 200811201230160076ef
STOP tp_getprots GP6 J 20081120124335 gp6adm ensv15xe 200811201230160076ef
STOP DD ACTIVATION GP6 A 20081120124335 gp6adm ensv15xe 200811201230160076ef
ERROR: stopping on error 12 during DD ACTIVATION
STOP imp single GP6 0012 20081120124335 gp6adm ensv15xe 200811201230160076ef
START imp single GP6 20081120132937 gp6adm ensv15xe 2008112013293600060e
START DD IMPORT GP6 H 20081120132937 gp6adm ensv15xe 2008112013293600060e
STOP DD IMPORT GP6 H 20081120132939 gp6adm ensv15xe 2008112013293600060e
START DD ACTIVATION GP6 A 20081120132939 gp6adm ensv15xe 2008112013293600060e
START tp_getprots GP6 J 20081120132939 gp6adm ensv15xe 2008112013293600060e
STOP tp_getprots GP6 J 20081120132942 gp6adm ensv15xe 2008112013293600060e
STOP DD ACTIVATION GP6 A 20081120132942 gp6adm ensv15xe 2008112013293600060e
START DISTRIBUTION OF DD-O GP6 S 20081120132943 gp6adm ensv15xe 2008112013293600060e
START tp_getprots GP6 S 20081120132943 gp6adm ensv15xe 2008112013293600060e
STOP tp_getprots GP6 S 20081120133028 gp6adm ensv15xe 2008112013293600060e
STOP DISTRIBUTION OF DD-O GP6 S 20081120133028 gp6adm ensv15xe 2008112013293600060e
START TBATG CONVERSION OF GP6 N 20081120133028 gp6adm ensv15xe 2008112013293600060e
START tp_getprots GP6 N 20081120133028 gp6adm ensv15xe 2008112013293600060e
STOP tp_getprots GP6 N 20081120133031 gp6adm ensv15xe 2008112013293600060e
STOP TBATG CONVERSION OF GP6 N 20081120133031 gp6adm ensv15xe 2008112013293600060e
START MOVE NAMETABS GP6 6 20081120133031 gp6adm ensv15xe 2008112013293600060e
START tp_getprots GP6 P 20081120133031 gp6adm ensv15xe 2008112013293600060e
ERROR ALL GP6 6 0012 20081120134632 gp6adm ensv15xe 2008112013293600060e
STOP tp_getprots GP6 P 20081120134637 gp6adm ensv15xe 2008112013293600060e
STOP MOVE NAMETABS GP6 6 20081120134637 gp6adm ensv15xe 2008112013293600060e
ERROR: stopping on error 12 during MOVE NAMETABS
STOP imp single GP6 0012 20081120134637 gp6adm ensv15xe 2008112013293600060e
START imp single GP6 20081121160246 ZRTC4_TM_ADM ensv15xe 20081121160245
INFO TBATG CONVERSION OF GP6 N not needed ZRTC4_TM_ADM ensv15xe 20081121160245
START MOVE NAMETABS GP6 6 20081121160247 ZRTC4_TM_ADM ensv15xe 20081121160245
START tp_getprots GP6 P 20081121160247 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP tp_getprots GP6 P 20081121160251 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP MOVE NAMETABS GP6 6 20081121160251 ZRTC4_TM_ADM ensv15xe 20081121160245
START MAIN IMPORT GP6 I 20081121160251 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP MAIN IMPORT GP6 I 20081121160257 ZRTC4_TM_ADM ensv15xe 20081121160245
INFO TBATG CREATION OF EN GP6 n not needed ZRTC4_TM_ADM ensv15xe 20081121160245
START SET VERSION FLAGS GP6 V 20081121160257 ZRTC4_TM_ADM ensv15xe 20081121160245
START tp_getprots GP6 V 20081121160257 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP tp_getprots GP6 V 20081121160300 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP SET VERSION FLAGS GP6 V 20081121160300 ZRTC4_TM_ADM ensv15xe 20081121160245
START EXECUTION OF REPORTS GP6 R 20081121160301 ZRTC4_TM_ADM ensv15xe 20081121160245
START tp_getprots GP6 R 20081121160301 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP tp_getprots GP6 R 20081121160311 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP EXECUTION OF REPORTS GP6 R 20081121160311 ZRTC4_TM_ADM ensv15xe 20081121160245
STOP imp single GP6 0000 20081121160311 ZRTC4_TM_ADM ensv15xe 20081121160245
excerpt of File P081120.GP6
1 ETP199X######################################
1 ETP172 MOVE OF NAMETABS
1 ETP101 transport order : "ALL"
1 ETP102 system : "GP6"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.29" "700"
1 ETP198
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
3 ETP301 -
3 ETP399 Didb-lib Version : 1.3
3 ETP399
3 ETP399 OPTIONS:
3 ETP399
3 ETP399 PRINT ONLY = no
3 ETP399 iNT-TIMESTAMP RESET = no
3 ETP399 DELETE iNT = yes
3 ETP399 DELETE iNT FIELDS = yes
3 ETP399 ACTIVATE iNT = yes
3 ETP399 TOLERATE UNCRITICAL STMTs = no
3 ETP399 COMPARE TIMESTAMPs IN MV40-Op. = yes
3 ETP399 SUPPRESS COMMITs = no
3 ETP399 CALL EXTERNAL NT_SYNC = no
3 ETP399 DONT TOUCH dep. LOADS = no
3 ETP399 RESET FLAG DBTABPOS = no
3 ETP399 protocol output to file = yes, /usr/sap/trans/tmp/P081120.GP6
3 ETP301 -
3 ETP399 PARAMETERS:
3 ETP399
3 ETP399 '
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2008/11/20 13:30:32")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "/BEV1/SR_S_VBAP_OUTPUT":
2 ETP399 >> Name of inactive nametab to read : DDXTT
2 ETP399 >> Format of inactive nametab to read: 5.0
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/BEV1/SR_T_VBAP":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/BEV1/TSRV43AAS":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/BEV3/CHBDKR":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/BEV3/CHBPR":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/ACCIT":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/ADD_FIELDS_A":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/AFFW":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/ALVHD":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/APPL_SD_ME_READ_HISTORY":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/ARSEG":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/AUFM":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/BBEFU":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/BEREIT":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "/CWM/BEREITADD":
3 ETP380 succeeded
etc etc ..
3 ETP379Xactivating Nametab "EMARA":
1AETR012XProgram terminated (job: "RDDMNTAB", no.: "13303200")
1AEPU320 See job log"RDDMNTAB""13303200""GP6"
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2008/11/20 13:34:58")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "EMARA":
1AETR012XProgram terminated (job: "RDDMNTAB", no.: "13345800")
1AEPU320 See job log"RDDMNTAB""13345800""GP6"
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
3 ETP301 -
3 ETP399 Didb-lib Version : 1.3
3 ETP399
3 ETP399 OPTIONS:
3 ETP399
3 ETP399 PRINT ONLY = no
3 ETP399 iNT-TIMESTAMP RESET = no
3 ETP399 DELETE iNT = yes
3 ETP399 DELETE iNT FIELDS = yes
3 ETP399 ACTIVATE iNT = yes
3 ETP399 TOLERATE UNCRITICAL STMTs = no
3 ETP399 COMPARE TIMESTAMPs IN MV40-Op. = yes
3 ETP399 SUPPRESS COMMITs = no
3 ETP399 CALL EXTERNAL NT_SYNC = no
3 ETP399 DONT TOUCH dep. LOADS = no
3 ETP399 RESET FLAG DBTABPOS = no
3 ETP399 protocol output to file = yes, /usr/sap/trans/tmp/P081120.GP6
3 ETP301 -
3 ETP399 PARAMETERS:
3 ETP399
3 ETP399 '
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2008/11/20 13:36:37")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "EMARA":
2 ETP399 >> Name of inactive nametab to read : DDXTT
2 ETP399 >> Format of inactive nametab to read: 5.0
3 ETP380 succeeded
3 ETP379Xactivating Nametab "EMARC":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "EMARC3":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "EMARM":
3 ETP380 succeeded
3 ETP379Xactivating Nametab "EMBEW7":
3 ETP380 succeeded
etc etc..
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_OIJTS"
3 ETP399 ("MANDT",
3 ETP399 "TSYST",
3 ETP399 "SPRAS",
3 ETP399 "VSART_TXT",
3 ETP399 "VKTRA_TXT",
3 ETP399 "TSNAM",
3 ETP399 "BOOKTS",
3 ETP399 "VSART",
3 ETP399 "VKTRA",
3 ETP399 "SHTYPE",
3 ETP399 "BUSTYP")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."TSYST",
3 ETP399 T4."SPRAS",
3 ETP399 T4."BEZEI",
3 ETP399 T5."BEZEI",
3 ETP399 T1."TSNAM",
3 ETP399 T1."BOOKTS",
3 ETP399 T1."VSART",
3 ETP399 T1."VKTRA",
3 ETP399 T1."SHTYPE",
3 ETP399 T1."BUSTYP"
3 ETP399 FROM
3 ETP399 "OIJTS" T1,
3 ETP399 "T173" T2,
3 ETP399 "TVTR" T3,
3 ETP399 "T173T" T4,
3 ETP399 "TVTRT" T5
3 ETP399 WHERE
3 ETP399 T2."MANDT" = T1."MANDT" AND
3 ETP399 T2."VSART" = T1."VSART" AND
3 ETP399 T3."MANDT" = T2."MANDT" AND
3 ETP399 T3."VKTRA" = T2."VKTRA" AND
3 ETP399 T2."MANDT" = T4."MANDT" AND
3 ETP399 T2."VSART" = T4."VSART" AND
3 ETP399 T3."MANDT" = T5."MANDT" AND
3 ETP399 T3."VKTRA" = T5."VKTRA" AND
3 ETP399 T5."SPRAS" = T4."SPRAS"
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:31: succeeded, DDL executed
3 ETP359 "V_OIJTS " total time = 00:00:00
3 ETP379X13:46:31: activating Nametab "V_OIJTSLOC":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_OIJTSLOC"
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_OIJTSLOC"
3 ETP399 ("MANDT",
3 ETP399 "TSYST",
3 ETP399 "LOCID",
3 ETP399 "LOCNAM",
3 ETP399 "BLOIND",
3 ETP399 "DELIND",
3 ETP399 "RDACT",
3 ETP399 "TSNAM")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."TSYST",
3 ETP399 T1."LOCID",
3 ETP399 T1."LOCNAM",
3 ETP399 T2."BLOIND",
3 ETP399 T2."DELIND",
3 ETP399 T2."RDACT",
3 ETP399 T3."TSNAM"
3 ETP399 FROM
3 ETP399 "OIJTSLOC" T1,
3 ETP399 "OIJLOC" T2,
3 ETP399 "OIJTS" T3
3 ETP399 WHERE
3 ETP399 T2."MANDT" = T1."MANDT" AND
3 ETP399 T2."LOCID" = T1."LOCID" AND
3 ETP399 T3."MANDT" = T1."MANDT" AND
3 ETP399 T3."TSYST" = T1."TSYST"
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:31: succeeded, DDL executed
3 ETP359 "V_OIJTSLOC " total time = 00:00:00
3 ETP379X13:46:31: activating Nametab "V_OIJTSLOCBL":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_OIJTSLOCBL"
3 ETP399
2WETP354 13:46:31: Warning: Retcode 512: SQL-error "942" in DDL statement for "V_OIJTSLOCBL
2WETP354 " - IGNORED
2WETP399 SQL-error-Text: "ORA-00942: table or view does not exist"
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_OIJTSLOCBL"
3 ETP399 ("MANDT",
3 ETP399 "TSYST",
3 ETP399 "LOCID",
3 ETP399 "PBLTYP",
3 ETP399 "PLANIND",
3 ETP399 "TSNAM",
3 ETP399 "LOCNAM")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."TSYST",
3 ETP399 T3."LOCID",
3 ETP399 T2."PBLTYP",
3 ETP399 T5."PLANIND",
3 ETP399 T1."TSNAM",
3 ETP399 T4."LOCNAM"
3 ETP399 FROM
3 ETP399 "OIJTS" T1,
3 ETP399 "OIFSPBL" T2,
3 ETP399 "OIJTSLOC" T3,
3 ETP399 "OIJLOC" T4,
3 ETP399 "OIFSPBLT" T5
3 ETP399 WHERE
3 ETP399 T1."MANDT" = T3."MANDT" AND
3 ETP399 T1."TSYST" = T3."TSYST" AND
3 ETP399 T4."MANDT" = T3."MANDT" AND
3 ETP399 T4."LOCID" = T3."LOCID" AND
3 ETP399 T4."MANDT" = T2."MANDT" AND
3 ETP399 T4."PBLNR" = T2."PBLNR" AND
3 ETP399 T5."MANDT" = T2."MANDT" AND
3 ETP399 T5."PBLTYP" = T2."PBLTYP"
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:31: succeeded, DDL executed
3 ETP359 "V_OIJTSLOCBL " total time = 00:00:00
3 ETP379X13:46:31: activating Nametab "V_OIRBPBLMAT":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_OIRBPBLMAT"
3 ETP399
2WETP354 13:46:31: Warning: Retcode 512: SQL-error "942" in DDL statement for "V_OIRBPBLMAT
2WETP354 " - IGNORED
2WETP399 SQL-error-Text: "ORA-00942: table or view does not exist"
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_OIRBPBLMAT"
3 ETP399 ("MANDT",
3 ETP399 "PBLNR",
3 ETP399 "RNBT",
3 ETP399 "MATHANDGRP",
3 ETP399 "SEQNR",
3 ETP399 "MATNR")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."PBLNR",
3 ETP399 T1."RNBT",
3 ETP399 T1."MATHANDGRP",
3 ETP399 T2."SEQNR",
3 ETP399 T2."MATNR"
3 ETP399 FROM
3 ETP399 "OIRBPBLB" T1,
3 ETP399 "OIRBMATMET" T2
3 ETP399 WHERE
3 ETP399 T1."MANDT" = T2."MANDT" AND
3 ETP399 T1."PBLNR" = T2."PBLNR" AND
3 ETP399 T1."RNBT" = T2."RNBT"
3 ETP399
3 ETP356 executed ( "00:00:01" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:32: succeeded, DDL executed
3 ETP359 "V_OIRBPBLMAT " total time = 00:00:01
3 ETP379X13:46:32: activating Nametab "V_VGNVA":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_VGNVA"
3 ETP399
2WETP354 13:46:32: Warning: Retcode 512: SQL-error "942" in DDL statement for "V_VGNVA
2WETP354 " - IGNORED
2WETP399 SQL-error-Text: "ORA-00942: table or view does not exist"
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_VGNVA"
3 ETP399 ("MANDT",
3 ETP399 "VSNMR",
3 ETP399 "VSKAT",
3 ETP399 "VSINACT",
3 ETP399 "EXT_AUFNR",
3 ETP399 "AUTYP",
3 ETP399 "VORNR",
3 ETP399 "LTXA1")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."VSNMR",
3 ETP399 T6."VSKAT",
3 ETP399 T6."VSINACT",
3 ETP399 T1."EXT_AUFNR",
3 ETP399 T1."AUTYP",
3 ETP399 T3."VORNR",
3 ETP399 T3."LTXA1"
3 ETP399 FROM
3 ETP399 "VSAUFK_CN" T1,
3 ETP399 "VSAFKO_CN" T2,
3 ETP399 "VSAFVC_CN" T3,
3 ETP399 "VSPRPS_CN" T4,
3 ETP399 "VSPROJ_CN" T5,
3 ETP399 "VSKOPF" T6
3 ETP399 WHERE
3 ETP399 T1."MANDT" = T2."MANDT" AND
3 ETP399 T1."MANDT" = T3."MANDT" AND
3 ETP399 T1."MANDT" = T4."MANDT" AND
3 ETP399 T1."MANDT" = T5."MANDT" AND
3 ETP399 T1."MANDT" = T6."MANDT" AND
3 ETP399 T1."VSNMR" = T2."VSNMR" AND
3 ETP399 T1."VSNMR" = T3."VSNMR" AND
3 ETP399 T1."VSNMR" = T4."VSNMR" AND
3 ETP399 T1."VSNMR" = T5."VSNMR" AND
3 ETP399 T1."VSNMR" = T6."VSNMR" AND
3 ETP399 T2."AUFNR" = T1."AUFNR" AND
3 ETP399 T3."AUFPL" = T2."AUFPL" AND
3 ETP399 T1."PSPEL" = T4."PSPNR" AND
3 ETP399 T5."PSPNR" = T4."PSPHI" AND
3 ETP399 T6."OBJNR_PD" = T5."OBJNR"
3 ETP399 AND
3 ETP399 T3."INACT"
3 ETP399 = ' '
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:32: succeeded, DDL executed
3 ETP359 "V_VGNVA " total time = 00:00:00
3 ETP379X13:46:32: activating Nametab "V_VGNWA":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_VGNWA"
3 ETP399
2WETP354 13:46:32: Warning: Retcode 512: SQL-error "942" in DDL statement for "V_VGNWA
2WETP354 " - IGNORED
2WETP399 SQL-error-Text: "ORA-00942: table or view does not exist"
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_VGNWA"
3 ETP399 ("MANDT",
3 ETP399 "VSNMR",
3 ETP399 "AUFNR",
3 ETP399 "AUTYP",
3 ETP399 "VORNR",
3 ETP399 "LTXA1")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."VSNMR",
3 ETP399 T1."EXT_AUFNR",
3 ETP399 T1."AUTYP",
3 ETP399 T3."VORNR",
3 ETP399 T3."LTXA1"
3 ETP399 FROM
3 ETP399 "VSAUFK_CN" T1,
3 ETP399 "VSAFKO_CN" T2,
3 ETP399 "VSAFVC_CN" T3
3 ETP399 WHERE
3 ETP399 T1."MANDT" = T2."MANDT" AND
3 ETP399 T1."MANDT" = T3."MANDT" AND
3 ETP399 T1."VSNMR" = T2."VSNMR" AND
3 ETP399 T1."VSNMR" = T3."VSNMR" AND
3 ETP399 T2."AUFNR" = T1."AUFNR" AND
3 ETP399 T3."AUFPL" = T2."AUFPL"
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:32: succeeded, DDL executed
3 ETP359 "V_VGNWA " total time = 00:00:00
3 ETP379X13:46:32: activating Nametab "V_VSAFVC_ORG":
3 ETP355Xstatements:
3 ETP399 DROP VIEW "V_VSAFVC_ORG"
3 ETP399
2WETP354 13:46:32: Warning: Retcode 512: SQL-error "942" in DDL statement for "V_VSAFVC_ORG
2WETP354 " - IGNORED
2WETP399 SQL-error-Text: "ORA-00942: table or view does not exist"
2 ETP399 -
DB-COMMIT() -
3 ETP399 CREATE VIEW "V_VSAFVC_ORG"
3 ETP399 ("MANDT",
3 ETP399 "VSNMR",
3 ETP399 "AUFPL",
3 ETP399 "APLZL",
3 ETP399 "ORGAUFPL",
3 ETP399 "ORGAPLZL",
3 ETP399 "INACT")
3 ETP399 AS SELECT
3 ETP399 T1."MANDT",
3 ETP399 T1."VSNMR",
3 ETP399 T1."AUFPL",
3 ETP399 T1."APLZL",
3 ETP399 T1."ORGAUFPL",
3 ETP399 T1."ORGAPLZL",
3 ETP399 T1."INACT"
3 ETP399 FROM
3 ETP399 "VSAFVC_CN" T1
3 ETP399
3 ETP356 executed ( "00:00:00" )
2 ETP399 -
DB-COMMIT() -
3 ETP378 13:46:32: succeeded, DDL executed
3 ETP359 "V_VSAFVC_ORG " total time = 00:00:00
2 ETP301 -
3 ETP361 "90" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2008/11/20 13:46:25")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2008/11/20 13:46:32")
2 ETP301 -
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20081120134632"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Excerpt of file GD6A902991.GP6 (I don't know how it can be useful..)
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO525XAktiviere abhängigen View "V_OIJRDSEL2"
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO525XAktiviere abhängigen View "V_OIJTS"
1 DDH202 Prüfe abhängige Suchhilfe "OIJ_TSYST"
1 DDH103 Suchhilfe "OIJ_TSYST" ist konsistent
3 DMC763 Schlüsselfeld "TVTRT"-"VKTRA" fehlt
2WDMC732 Alle Felder werden als Schlüsselfeld gewertet
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO526 View wurde mit Warnungen aktiviert"V_OIJTS"
3 DDO525XAktiviere abhängigen View "V_OIJTSLOC"
1 DDH202 Prüfe abhängige Suchhilfe "OIJLOCID"
etc etc..
3 DDT402 Append-Struktur "/CWM/WUEB" an Tabelle "WUEB" angefügt
2WDDT191 Erweiterungskat. "3" möglich, aber Include oder Subtyp ist noch unklassif.
3 DDT038 Aktivierung abhängige Tabelle "WUEB" erfolgreich
3 DDT014XAktiviere abhängige Tabelle "ZCXCB"
3 DDT402 Append-Struktur "OILZCXCB" an Tabelle "ZCXCB" angefügt
2WDDT192 Erweiterungskategorie für die Tabelle fehlt
2WDDT193 Erweiterungskategorie für Include oder Subtyp fehlt
3 DDT059 Abhängige Tabelle "ZCXCB" wurde mit Warnungen aktiviert
3 DDO525XAktiviere abhängigen View "M_OIJAA"
1 DDH202 Prüfe abhängige Suchhilfe "OIJAA"
1 DDH103 Suchhilfe "OIJAA" ist konsistent
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO525XAktiviere abhängigen View "M_OIJAB"
1 DDH202 Prüfe abhängige Suchhilfe "OIJAB"
1 DDH103 Suchhilfe "OIJAB" ist konsistent
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO525XAktiviere abhängigen View "M_OIJAC"
1 DDH202 Prüfe abhängige Suchhilfe "OIJAC"
1 DDH103 Suchhilfe "OIJAC" ist konsistent
3 DMC728 Der View muß auf der Datenbank gelöscht und neu angelegt werden
3 DDO525XAktiviere abhängigen View "V_OIJRDSEL"
2WDMC506 Inkonsistenz beim Referenzfeld zu "V_OIJRDSEL"-"TMAXLOT"
2WDMC506 Inkonsistenz beim Referenzfeld zu "V_OIJRDSEL"-"TMINLOT"
2WDMC506 Inkonsistenz beim Referenzfeld zu "V_OIJRDSEL"-"TINCLOT"
2WDMC506 Inkonsistenz beim Referenzfeld zu "V_OIJRDSEL"-"TMAXINV"
2WDMC506 Inkonsistenz beim Referenzfeld zu "V_OIJRDSEL"-"TTARGET"
etc etc..
3 DDT014XAktiviere abhängige Tabelle "LEDSPD_ATOM_QUANTS"
3 DDT402 Append-Struktur "/CWM/LEDSPD_ATOM_QUANTS" an Tabelle "LEDSPD_ATOM_QUANTS" angefügt
2WDDT192 Erweiterungskategorie für die Tabelle fehlt
2WDDT193 Erweiterungskategorie für Include oder Subtyp fehlt
3 DDT059 Abhängige Tabelle "LEDSPD_ATOM_QUANTS" wurde mit Warnungen aktiviert
3 DDT014XAktiviere abhängige Tabelle "LEDSPD_LIST_ITEM"
3 DDT402 Append-Struktur "/CWM/LEDSPD_LIST_ITEM" an Tabelle "LEDSPD_LIST_ITEM" angefügt
2Hi, Please go and download the log in ST22 in the time of the transporting these object and post here if you have any.
Jey -
SAP Best Practices - Error during the activation of Baseline Package
Hello,
I don´t know if this is the right forum to post this message, but I posting here as i didn´t get the info from the related forum, apologies for that.
During the process of activation the Baseline Package 603V8 on ECC6.0 EHP3 (I´m importing all scenarios) from solution builder (txcode /n/smb/bbi)... it stopped and it shows me the following error:
Start activation BC Set: /SMBA0/V_T001P_B0BN_J01
Not activated - error
End of activation BC Set: /SMBA0/V_T001P_B0BN_J01
Can someone help me solve this problem?
Thank you
João Dimas - PortugalHello again,
I already solved this specific issue that I reported in my previous message, I did the manual activation (txcode SCPR20) of that BC Set: /SMBA0/V_T001P_B0BN_J01 guided by the document "SAP Best Practices Tools". After this activation I pressed the Change button that is displayed in the Old Status column and I changed the status to successful, after I chose the Activate to continue with the installation. But, once again, other error stopped the installation, now with other BC Set:
/SMBA0/V_T001L_B175_J0A
I tried to solve with the same method through the manual activation, but now it was not possible, when I do that in SCPR20 the activation logs show me four warnings (see the image "BC Sets: Activation logs")... and I don´t want to continue with activation/installation of the full scope without solve this issue or can I continue?!
Can you help me please?
Thank you,
João Dimas - Portugal -
Error during ODS activation- request deletion
Hello Gurus,
We had a problem during ODS activation, could you please help?
We are on BW 3.1
Activation of an ODS failed with the message, "Fiscal year variant MC is not maintained for calendar year 2009u201D, u201CError getting SID for ODS object ZODS_O02u201D and u201CError when assigning SID: Action VAL_SID_CONVERT table 0FISCPER."
The expected data for 2009 didn't arrive, so the activation step in the proces chain has failed.
What I've done is, just deleted the request from the ODS.
But while this job was running, there was a short dump, and the same job was shown as cancalled under SM37. Though the request was successfully deleted from the ODS, it is showing as cancelled in SM37.
I've given below the log details of the job.
Job started
Step 001 started (program RSDELPART1, variant &0000000003334, user ID ABCD)
Delete running: ODS object ZODS_O02, from 310,818 to 310,818
Delete is scheduled; Selection conditions were substituted
Request REQU_4AZBURUGR09EXTAS8A9IRZUI4 successfully deleted from ODS object ZODS_O02
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled.
Could you please clarify the reason for the short dump and for the job getting cancelled?
thanks in advance,
RajHi,
As an help i suggest you can first check the corresponding message for the "Message type X" in transaction se91.
Follow the below procedure for the same :
1.Execute ST22 > Double click on any entries
2.Go to Source Code Extract
3.Locate u201C>>>>u201D and you will see Message
i.e Message X041 (XX) in this example.
- XX is the message class
- 041 is the message class no. in the example above.
4.Now open SE91.Enter the details we found from Source
Code extract in ST22.Click Display
5.Find the corresponding message.
May be the message could much more elaborate your problem so it could be handeled properly.
Thax & Regards
Vaibhave Sharma -
Error during solution manager 3.2 installation.
Hi !
I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
Getting ther following error -
"CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
"CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
Kindly suggest the solution.
Regards-
sanjayhi Markus!
The ora_sql_results.log file shows the following-
"2007-06-07, 18:32:21 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT / AS SYSDBA
SHUTDOWN ABORT
@CONTROL.SQL
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
EXIT
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Connected.
ORACLE instance shut down.
SP2-0310: unable to open file "CONTROL.SQL"
ORA-01012: not logged on
ORACLE instance started.
Total System Global Area 546906764 bytes
Fixed Size 455308 bytes
Variable Size 293601280 bytes
Database Buffers 251658240 bytes
Redo Buffers 1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
ALTER DATABASE ARCHIVELOG
ERROR at line 1:
ORA-01507: database not mounted
ALTER DATABASE OPEN
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
What to follow... pls guide
Regards-
sanjay -
Error during Solution Manager Installation
I'm trying to install Solution Manager on a Windows 2003 and MS SQL 2005 database and keep receiving the following error:
WARNING[E] 2008-10-10 16:56:18.643
CJS-30149 ABAP processes of instance SOL/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
ERROR 2008-10-10 16:56:19.222
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
Can anyone help?Hi Markus,
I am getting the same erros during installation BI7.
the server already running one BI7 instance on it as development serevr.
& same server we are using for the PRD instance. which giving the error for the Phase 27 - start Instance.
Installation for dev server we configured Local SLD. & for
PRD used to register in exisitance SLD in which I use the HTTP Port 50000 may be it was the problem deu to this if the Port is wrong.
see the trace file.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 05
sid BIP
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 7968
Sat Oct 25 11:50:40 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (05 7968) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3905
Sat Oct 25 11:50:51 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0134.qqq.nxst) took 11 seconds
Sat Oct 25 11:51:07 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >abgsapbi_BIP_05 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 24573MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 24576MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_05_006 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 22016000 K
Config. maximum size : 28672000 K
Avail. maximum size : 28672000 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
6144000 K
8192000 K
8192000 K
8192000 K
2
d:\pagefile.sys
4608000 K
6144000 K
6144000 K
6014664 K
3
e:\pagefile.sys
6144000 K
8192000 K
8192000 K
8115200 K
4
f:\pagefile.sys
5120000 K
6144000 K
6144000 K
6144000 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 2010476683
Commit Charge Total : 0 K
Commit Charge Limit : 2143554319 K
Commit Charge Peak : 2047 K
Phys.Memory Total : 131657184 K
Phys.Memory Available : 0 K
File Cache : 2143594271 K
Kernel Memory Total : 2047 K
Kernel Memory Paged : 393225 K
Kernel Memory Nonpaged : 5894 K
Memory usage of current process
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008589013404 K
Private Pages : 0 K
Total heap size : 23195 K
Virtual memory regions : 0 K
Uncommitted heap memory : 14544 K
Allocated heap memory : 7042 K
Moveable heap memory : 1137 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
7372
sapstartsrv.exe
19208 K
19208 K
21264 K
21772 K
6
6744
msg_server.EXE
[MS] BIP_05
10680 K
10680 K
14004 K
14008 K
2
7968
disp+work.EXE
42124 K
42276 K
74364 K
81588 K
10
8100
igswd.EXE
[**] BIP_05
3924 K
4204 K
2892 K
3252 K
1
7904
igsmux.exe
14484 K
14484 K
18080 K
18084 K
3
7176
igspw.exe
3376 K
3376 K
3704 K
3704 K
0
3596
igspw.exe
3376 K
3376 K
3704 K
3704 K
0
Sum
97172 K
138012 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Oct 25 11:51:17 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Oct 25 06:21:17 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Sat Oct 25 06:21:17 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Sat Oct 25 06:21:17 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Oct 25 06:21:17 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Oct 25 11:51:22 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >abgsapbi_BIP_05 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 7968) [dpxxdisp.c 10421]
Good Bye .....
Thanks & Regards,
Darshan... -
Java-Error during Solution Manager Installation
During the Installation at point "Prepare to install minimal configuration" I'm getting the following error message:
An error occurred while processing option <i>SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Assertion failed: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
var nw = NWInstall.getSystem(context.get("sid"));
var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
var ctcCall = ctcDirFs.concat(ctcExeFile);
installer.writeTrace("CTC is in" + ctcCall);
ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
var pmgt = new ProcessMgt();
var app = pmgt.createChildApplication(ctcCall, []);
var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
var user = (new AccountMgt()).getUser(userData.name);
var env = pmgt.getProcessEnvironment();
if (installer.onUnix()) {
env.setUser(user);
} else {
if (installer.onOS400()) {
env.setUser(user);
env.setGroup(user.getPrimaryGroup());
env.setKernelLibrary(nw.getOS4_Krnlib());
env.setWorkingDirectory(ctcDirFs.getNode());
var javaHome = nw.getJavaHome().toString();
env.setEnvironmentVariable(new Property("JAVA_HOME", javaHome));
installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
app.setEnvironment(env);
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 1)
As a JVM I'm using the version provided by SAP on DVD, JDK is ver6_26-rev_b21, JCE_policy is version 6.
Can anyone help me here?WARNING 2011-12-07 13:09:36.864
Execution of the command "C:\usr\sap\DSM\DVEBMGS00\j2ee\ctc\LaunchOfflinectc.bat" finished with return code 1. Output:
1 file(s) copied.
java.io.BufferedInputStream@4a4e79f1
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager Java
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Dec 7, 2011 1:09:36 PM ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info:
Dec 7, 2011 1:09:36 PM ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProvider
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.IllegalStateException:The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil_1_5:getStringValue25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil:getStringValue161
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transformInternal390
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform118
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform89
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2JavaProcessFactory:lightLoadProcessFromXML191
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:loadProcess402
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleProcessesInternal350
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleRootProcesses222
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessEngine:getVisibleRootProcesses489
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard121
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main585
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.reflect.Method:invoke597
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
Program terminated abnormally -
Fatal Error During Solution Center Install - "Key Not Valid for Specified State"
I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One. The software I'm installing is "OJJ6400_Full_10.exe"
I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software. However, shortly after that I get a fatal error the full text of which are:
Error Situation Code: 23551631
The following lines were retrieved from the installation error logs.
Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
Error message received: Key not valid for use in specified state.
X:\cioum32.msi failed with return code 1603
MSIInstall() failed with 1603
Exit code=1603
Your help is appreciated. Thanks.Hey @redleader74,
At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
Step 1: Uninstall Drivers:
Click on your Start menu
Select All Programs
Select the HP folder
Select your HP Officejet
Select Uninstall
Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
Step 2: Clear Temp Files:
Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling Bin
Step 3: Unlock System Administrator Account:
Click on your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
Step 4: Install Device:
Under the Administrator Account please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Once the download is complete please follow the onscreen instructions to install your printer
Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
If everything works fine, you will want to Hide the Administrator Account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Hi Experts:
I am loading data to ODS. From R/3 to Data Source (PSA) data gets loaded without any problem at all. But during activation in ODS, it fails.
I am getting the following error:
Error when assigning SID: Action VAL_SID_CONVERT table 0POSTXT Message no. RSDRO302
Value '#' (hex. '23') of characteristic 0POSTXT contains invalid characters Message no. BRAIN059
Process 000046 returned with errors Message no. RSODSO_PROCESSING006
Now I checked in PSA, I did not see any # sign any where. Plz help me with this.Hi,
Try writing following code in the udpate routine of 0postxt.
replace all occurence of '#' in 0postxt with '-'.
Also , some logic like following can be built for entries which have blank line item text .
if 0postxt = space .
0postxt = ' -' .
endif.
Check out and let us know .
Hope that helps.
Regards
Mr Kapadia -
Recieved error during Solution Manager EHP1 Java Components installation.
I successfully installed EHP1 ABAP components but I'm have a problem with the Java components. I recieved the following error. Import aborted during ADSSAP02_0-20002778.SCA
Feb 20, 2009 3:17:59 PM Error: Aborted: development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'802.20071213024549.437972'/'1', grouped by software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634''/'1':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application com.adobe/DocumentServicesLicenseManager..
Reason: Exception during generation of components of application com.adobe/DocumentServicesLicenseManager in container EJBContainer.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application com.adobe/DocumentServicesLicenseManager in container EJBContainer.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Feb 20, 2009 3:17:59 PM Info: Starting to save the repository
Feb 20, 2009 3:18:01 PM Info: Finished saving the repository
Feb 20, 2009 3:18:01 PM Info: Starting: Update: Selected software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634''/'1' updates currently deployed software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.16.0.20080610114809''/'0'.
Feb 20, 2009 3:18:01 PM Error: Aborted: software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634''/'1':
Failed deployment of SDAs:
development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'802.20071213024549.437972'/'1' : aborted
Please, look at error logs above for more information!
Error: Aborted: development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'802.200712
13024549.437972'/'1', grouped by software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634''/'1':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application com.adobe/DocumentServicesLicenseManager..
Reason: Cannot load one of the bean interfaces or the bean class of bean LicenseEJBBean.; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBXMLParserException: Cannot load one of the bean interfaces or the bean cla
ss of bean LicenseEJBBean.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Feb 20, 2009 11:25:59... Info: Starting to save the repository
Feb 20, 2009 11:26:01... Info: Finished saving the repository
Feb 20, 2009 11:26:01... Info: Starting: Update: Selected software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634'
'/'1' updates currently deployed software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.16.0.20080610114809''/'0'.
Feb 20, 2009 11:26:01... Error: Aborted: software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.01.2.0.20080930104634''/'1':
Failed deployment of SDAs:
development component 'DocumentServicesLicenseManager'/'com.adobe'/'Adobe Systems'/'802.20071213024549.437972'/'1' : aborted
Edited by: Darrell Kirklen on Feb 23, 2009 5:03 PMJust resolved problem. While reviewing the sdmlog20090310.log I found
error "java.lang.UnsupportedClassVersionError?" when I goggled this
error "How do I resolve a java.lang.UnsupportedClassVersionError? I
found the following solution:
http://support.codegear.com/article/35846 : This exception can occur
when the source is built targeting a JDK that is not supported by the
JDK attempting to run it. In the above example, if the servlet was
built targeting only JDK 1.5, but the web server runs JDK 1.4, the
above exception will occur. Check, Project Properties | Build | Java |
Target VM, and verify that the Target VM indicates a JDK compatibility
that is appropriate for the JDK that is running it. It is recommended
to set this field to 'All Java SDKs' for the most compatibility. The
only reason you would want to specify a particular version is if your
code uses language features that only appear in a particular version of
the JDK, and you want to ensure that users use only a compatible JDK.
Also check, Project Properties | Build | Java | Language Features, and
verify that the Language Features are applicable with JDK that is
running it
A this point I checked the java -version at the os level and it showed
1.5.0_17 we are aware the supported version of java should be 1.4.2_16
our Unix team (Solaris) recently installed new patches and didnu2019t
remember to leave the java version at 1.4.2_16 after their were done.
Once the java version was set back to 1.4.2_16 I was able to complete
the java portion of EHP1 using the JSPM successfully.
Edited by: Darrell Kirklen on Mar 13, 2009 4:37 PM -
Hi all,
I have a DTP to load data from one DSO to another DSO. I'm getting the following error while activating this DTP,
Activation of Objects with Type Data Transfer Process
Internal Activation (Data Transfer Process )
Post Processing/Checking the Activation for Data Transfer Process DTP_4EQUEFXTS6NLNSRPCP2G
Error from PSA ****
Error when activating Data Transfer Process DTP_4EQUEFXTS6NLNSRPCP2GSYT00
I'm not able to activate the DTP . How to solve this error?
Thanks in advance.Hi,
Are your DTPs delta loads? Sometimes, you may face this problem with the DTPs with delta loads. in that case, the delta DTPs don't get overwritten sometimes. This could be the problem.
Regards
sunil -
Error during Windows Activation
Original title: when i going to actives windows error come
this app does not support the contract specified or is not installedIf I interpret your post correctly, you are reporting that this error occurs when you attempt to activate Windows. Other users who have experienced this error have reported that running
DISM \Online \Cleanup-Image \RestoreHealth to repair system corruption resolved their issue and allowed them to activate.
I have changed the title of this thread to reflect this scenario, if you are experiencing a different issue, please help clarify the problem you are encountering.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet -
Cancellation Error during Internal Activity Allocation in Event Management
Hi,
we use Internel Activity Allocation in Event Management.
The User wanted to cancel a document, so he did.
But now the status is (red-lihted) "Error in doc. cancellation 1".
Our systems, R/3 and HR, are located on the same server.
How could I cancel the document now?
Do I have to post the same negative worth in CO?
Greetings,
Philip BeilharzHi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS -
Hi,
I was trying to activate an ODS while loading the data from a FlatFile using SAP BW 7.4.
The Data was loaded completely in correct format in the PSA and also into the New Data and Change log tables in the ODS.
But when trying to activate the ODS, it shows me an error.
The description of the RunTime exception is :
"An exception has occurred which is explained in more detail below. The exception is assigned to class 'CX_PARAMETER_INVALID_RANGE' and was not caught
in procedure "GET_NEXT_PACKAGE" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated this exception, the current program was terminated.
The reason for the exception is: Parameter has invalid value: Parameter IM_TEMPERATURE has invalid value 01011900."
Can you please help me solving this issue?
Thanks,
BhaskarHi Bhaskar,
The message seems to be soft clear, and near of a bad value format, a parameter bad informed.
"Parameter has invalid value: Parameter IM_TEMPERATURE has invalid value01011900" Try to pass a "0" in order to know if this is the parameter or field. And check the Data Type spected.
Regards -
Error during activation of NitroX Free JSP Editor
Thank you for downloading NitroX.
If you experienced an error during the activation of the NitroX Free JSP Editor due to an earlier trial version already installed, please click the following link to activate the product and this will resolve the issue:
https://devclub.m7.com/getFreeJsp.do
If you have any other questions please do not hesitate to contact us.
M7 SupportI activated NitroX fine last night at home, but I tried it at work which uses a proxy server, and it's failing activation.I then tried manually pasting the code from the web site as mentioned in this post, but when I hit OK it just says that NitroX will not be available.
I am having the same problem.
Maybe you are looking for
-
Payments and outstanding balances of a customer
hi, we are using CRM 4.0. whats is the t-code to check the outstanding balances and pyaments made by a specific customer. similar to FBL5N in ECC. Pls help. I need to check the product availability[stock status[ while placing an order online. what is
-
Time Machine backup not visible in Disk Utility, nor accessible through Recovery Assistant
Hi, I want to recover from a Time Machine backup but the external HD where it was stored now shows empty (1TB available) and the name 'backup' has been replaced by 'untitled'. It was fine yesterday. How do I get my backup back? Is there external s
-
AirPort Extreme and PS3.
Hi, OK, Few weeks ago I got the PlayStation 3, and i have set everything in the AE and on the PS3, somehow it is impossible for me to connect to the internet wirelessly via PS3, is it possible that the AE will somehow block the PS3? it says : [on ps3
-
Compound Path - determine winding rules
I have a compound path, and i need to parse all points, for export to CANVAS HTML , for this I wrote this script: But the problem is how to detect the holes. I find information, and i think that i need the fill rule or clockwise fill, but in the refe
-
Recovering a backups from scratch
Hello. I'm a UNIX SA, not a DBA, so I appologies if I seem alittle daft when it comes to Oracle. We've been doing RMAN backups of our databases for some time. I handle the NetBackup side of things and our DBA handles the RMAN side. Looking forward to