Error during step C3 Load Master Data of report /SAPAPO/OM_LC_UPGRADE_70

We are upgrading from SCM 5.0 to SCM 7.0. We have tried to run step C3. Load master data but it keeps displaying a red light with "Jobs for creating master data terminated". Messages in the job log are as follows:
Message text                                                                                Message class Message no. Message type
Job started                                                                                00           516          S
Step 001 started (program /SAPAPO/RESOURCES_LC_CREATE,
variant &0000000000011, user ID #######)                                                         00           550          S
Prepare data                                                                                00           001          S
Create Resources                                                                                00           001          S
Create Resources with setup matrix                                                                       00           001          S
Wrap Up                                                                                00           001          S
Error creating resources in liveCache                                                                     00           001          E
Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
There are no dumps in st22 or messages in the system log sm21. We have tried numeorus searches on SDN, Marketplace, and Google and have found nothing.
Any suggestions or help would be greatly appreciated.

Hello George Woods,
1. For the reported error itu2019s not good idea to search the solution in SDN.
2. Please check, that the notes recommended in SAP note 1292734 were applied
before you run C section steps.
3. I recommend you to create the SAP ticket to the component u201CSCM-APO-MD-REu201D.
Thank you and best regards, Natalia Khlopina

Similar Messages

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • Error 0 update while loading master data

    Hi,
        Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
    Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
    Thanks & Regards,
    Mahi.

    I've a compounding characteristic in this characteristic.
    And the master data loading was fine yesterday but today it doesn't work.
    When I check with rsrv this characteristic, a dump with message:
    Error in ABAP application program.
    The current ABAP program "SAPLRRSI" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
    in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
    "Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
    "d tables nor defined by a "DATA" statement. "DATA" statement."
    So I think something is wrong in this Char.
    But what can I do for that?
    Thanks a lot for all idea.
    Juan

  • Steps to load master data to BW from R3

    Hi Gurus,
    Can you please give me step by step process to load master data to BW from R3 using an enhanced business content datasource.
    Thanks,
    Regards,
    aarthi
    [email protected]

    Hi Aarthi,
    1. You will need to replicate your datasource into BW.
    2. Assign the datasource to an InfoSource and activate the transfer rules.
    3. If you are doing flexible updates then you need to have update rules from this InfoSource to your InfoObject to which you want to load this data.
    4. Create an InfoPackage in RSA1 > Modeling > InfoSources, under the InfoSource to which you assigned the datasource.
    5. Make any selections for data is reqd and select if this will be a full or init load.
    6. Execute (Start the load) and check the data load monitor (F6 in the InfoPackag) to see if the data laod is going on smoothly.
    7. After the load is complete, activate the master data.
    Hope this helps...

  • Error in DTP while loading master data

    Hi Experts,
    When Iam loading 0MAT_SALES attributes master data, the load is complete till PSA. But whicle executing DTP to reach its further data target "info object" I getting an error Data record 7632 ('030001DF2116VBG20V-M9‚B '): Version '030001DF2116VBG20V-M9‚B ' is not valid. I understand that the same key values exist in the field.
    Iam also aware that if we check the tab "unique data records" in the update tab of DTP, it may be resolved.. but is this the right way to resolve this error? Or there is any other way to resolve this. Please help me to sort this.
    Also, in the above error statement, how can i see the record no "7632" in the PSA maintenance srceen?
    Points will be assigned.
    Best Regards,
    Geeta.

    Hi,
    Once you identify the master data record because of which the load is failing go and check the Master Data table for 0MAT_SALES(P-Table).And check for the OBJVER for the particular record.
    It might be happening that the same record exists in both M and A version(as you said data with same key exists)or the record might be in M Version.
    In that case run a Attribute changerun for 0MAT_SALES.This should bring all the records in A version.Then repeat the load and check.It mite go through.
    This might happen if there were changes in the Master data inthe last run and no change run was performed.
    Regards,
    Abhishek

  • Error 4 update while loading master data

    Hi Experts,
    While I am trying to extract master data for HR Object(0HR_OTYOBJ). I am getting errors in Detail Tab  as
    Record 6332 :0HR_OTYOBJ : Overlapping time intervals of data record 6332 with 6333 : '['19951107'/'1
    Record 6333 :0HR_OTYOBJ : Overlapping time intervals of data record 6333 with 6334 : '['19951115'/'1
    Like for 15 records.
    It is saying that Error 4 in the update .
    In status tab
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update
    Can u pls give me ur suggests to sole this problem?
    Regards,
    Sridhar

    Hello,
    As per the error message in your data there are few overlapping records, that means with in the same time frame, there are duplicate records.
    Pls ask your HR functional consultant to check whether this is correctly maintained in SAP R/3.
    If this is correct in R/3, then goto 0HR_OTYOBJ properties and disable the time dependency of master data.
    Ravi

  • Error When trying to load master data 0material

    Hi,
    I got the following error when trying to laod 0MATERIAL master data
    "value '000000000004343434 ' for characteristic 0MATERIAL is in external format     "
    "0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
    Can anybody help me in resolving this issue.
    Regards

    Hi,
    Run transaction OMSL.
    Create an entry for MATCONV in the overview screen.
    Double click on this line and set the length parameter for MATCONV.
    the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
    Hope this helps
    Provide points if it does.
    Regards
    Lalan

  • Error in BI when loading Master Data

    Hi All,
    I searched solution for this error in previous thread to find solution for the below error
    Messages for data records saved; request is red acc. to configuration.
    But I couldn't find out ..
    What is this error all about ..Why was this coming???
    What is the solution for this..
    Thanks
    Bharath

    Hi ,
    Error :
    Messages for data records saved; request is red acc. to configuration.
    Thanks
    Bharath

  • Loading master data from SD to BW

    Hi Friends
    does anyone have steps for loading master data of SD to BW. I have loaded transaction data, need to load the customer and material master data.
    let me explain in more detail. i have extracted the data from a table in R/3 and it doesnt have the material and customer description, so the cube also wont have the same. the mat description is a table in R/3 called MAKT. how do i go about getting that material description into the cube. i hope this is clear enough and if you have any queries post so i can reply.
    I am working on LO extraction. As one of the contributors suggested, I need to do an enhancement, is it in the form of an ABAP routine or can it be done by adding a field to the cube. Pls suggest.
    Regards
    RP
    Message was edited by:
            rp

    hi,
       first thing which shouold be kept in mind is that master data should be loaded first than the transactioenal data should be loaded so as to reduvce time.
    the steps ara
    1.replicate the data source to bw by going to source system and chosing replicata datasoources.
    2.actvate the data sources.
    3.now create transformation between  data source and target and then create infopackage and schedule.
    pls assign points if helfuyl.

  • Error During Loading Master Data

    Hi Gurus,
    I'm loading master data from R/3 to BW 3.5 but i'm getting the following error for all the Infosources
    "Request IDoc : Application document not posted"
    Can anyone help me out of this
    Thanking you inadvance
    R.Saravanan

    Hi Saravanan,
                 Check this previous postings on the same issue.
    InfoPackage loading giving IDOC Error: Status 51
    Application document not posted
    Cheers,
    Aravindhan

  • Error while loading master data to attribute ZMAJORGU(Major organisational unit)

    Hi Experts,
    While loading master data to  ZMAJORGU(MOU)(info object texts) from  datasource (ZOS_HRP1000)datasource iam getting error in DTP.
    below is the error...
    Diagnosis
        Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
        the attribute/characteristic ZMAJORGU &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This
        allows you to maintain your master data.
    Please find the below screen shots
    I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
    I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
    'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest  value i could find in both the fileds was was AVP Shipment .
    I have the following questions
    1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
    2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
    Please find the attached PSA data file (u have to convert it to Excel)
    I request people to help me analyse the issue and fix the issue.
    Regards
    Kiran

    Ram
    I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres  like smallof caps or numeric... why on this record is creating an issue...
    please have a look at error stack
    and i have one more question when i look at PSA there are close to 300000 records
    but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
    Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

  • Error in Setting lock for Master Data Load

    Hi Team,
    I encounter the following error while uploading the Masterdata
    "Lock NOT set for: Loading master data attributes
    Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
    I Performed the following steps
    1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
    2) RSATTR->infoobject list-> no infoobject found
    3)Tried after sometime ,but load continue to fail
    Could anyone help to solve the problem
    thanks
    Bala

    Hi Bala,
    Check in SM12 if there are any locks exist with the change run number?
    First check if there are any Master data loads running related to it?
    Check in the Attribute change run screen if there are any change run steps are running?
    Once after checking the above if no locks exist and no master data is running then check the below steps
    1. Run RSA1 transaction
    2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
    3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
    4. Click "Reset Status" button at Run ID 465451241
    NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
    If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
    Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
    It releases all the locks by that change run....and continue with your further work/jobs...
    Regards
    KP

  • Error while loading master data from R/3

    Hi Friends,
                I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
    Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
    In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
    Pls waiting for your replays
    Thanx in advance
    Balaji K.

    Hi Aswin,
               Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
    "Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
             How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
    Pls clarify this problem
    Regards.,
    Balaji K.

  • Strange error while loading master data

    Hi,
      Has anybody seen the following error while loading master data?
    6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
    6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER     
    and repeat again once (so total 4 lines of error message)
    The update mode is "PSA and then in the infoobject (Package by Package)"
    Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red.  The over all status i.e. Total and  Technical are both red.
    It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
    To make matter more confusing there are no error records in corresponding PSA data package.
    any comments would be greatly appreciated.

    Hi Novice,
    In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
    Hope this helps...

  • Loading master data : error invalid characters

    Hello,
    I load master data (example 0PROG_POS) into BW with InfoPackage and loading stops with error "invalid characters". In the logs, the error is due to a special character (in french Ä :  a special A).
    On BW side, is it possible to solve this problem (I don't understand the message in the help : "If this message appears during a data load, maintain the attribute in the PSA maintenance screens").
    My BW is 3.5 patch 7
    Thanks in advance for your help.
    Daniel.

    HI Daniel
    all characterstic & special characterstic
    goto TCODE: RSKC -> all_capital-> F8
    again : rskc-> !"%&'()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXY ->F8
    GOTO SE11: RSALLOWEDCHAR (maintain special characterstic)
    also u  can goto-> SE37->RSKC_ALLOWED_CHAR_GET
    -> F8
    THANKS & BEST REGARDS
    SANGRAM KESHARI SUTAR

Maybe you are looking for