Error during template allocation (CPTK) WBS element not found
Hello Gurus,
I tried to do template allocation
system is showing error WBS element xxxxxxxx does not exist
object type is - PR
object is - WBS
system is searching for field PSPNR of table PRPS as per the object type PR which is maintained in table TBO00 but during template allocation program it seems system is referring for POSID of table PRPS. hence the error.
Is there any note to apply? or any config I have missed ?
please guide
Thanks and regards
V.S.Natarajan
Hello Saurabh,
Thanks for your quick response
I checked both the notes created program as per note 149695 and there is no hierarchy error and applied the note 1853307 but still the same error exist
any other suggestion please
Thanks and regarsd
V.S.Natarajan
Similar Messages
-
Element not found when duplicating "Basic EFS" template
I've been trying to duplicate the Basic EFS template as either a Windows 2003 or 2008
template and everytime I use the new template via GPO to encrypt (EFS) any files/folder, I keep getting the "Element Not Found" error. I've looked all over event logs and can not find any errors that will point me in the right direction to
troubleshoot this issue. I noticed it will only work if I use the Basic EFS template. I've Google and have found several forum posts that states to duplicate the Basic EFS template as a Windows 2003 template to fix this problem, but I'm still getting
the same error. Any help is appreciated.
Thank you.Does it also fail if you start from a fresh user profile (no previous attempts to encrypt or enrol for certificates using any template)? This is to rule out any effects of caching anything, such thumbprints of EFS certificates used before
in the registry.
I would in particular repeat a test with a fresh profile and a W2K3 template after AD replication and GPO refresh has been done - I still think the most likely explanation is still that the client actually tried to use a W2K8 template which
was still cached.
After you created the W2K3 template - did you make any changes to the CSP / cryptography after you had copied Basic EFS? Which provider do you use - I guess it should be Enhanced or Strong provider?
Otherwise, I would probably compare all Object Access events for Basic EFS and for the other templates, and look for things like failed attempts to access key files. If there is nothing promising there, rather use
Process Monitor (Sysinternals) to compare "good" and "bad" encryption.
I admit that these tools are quite overwhelming and require some practice but I think I have exhausted all other ideas.
Elke -
Error in installing windows 2008 r2 sp 1 element not found
error in installing windows 2008 r2 sp 1 element not found
Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu -
Error in allocating Despatch number Interval not found Number object J_1IIN
Dear All,
I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
Can somebody help me with a solution ?
Rgds,
Indrajit DeyDear Indrajit
Go to SNUM, input object J_1IINTPR2 and click on Number Ranges. Enter [Excise Group] and click on Intervals (with pencil icon). Maintain the number range and save. Now try the process once again.
thanks
G. Lakshmipathi -
WBS Elements not getting created in ECC Project System from CRM 7.0
Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1. Set up the RFC connections between the two systems
2. Selected the connection type as Middleware in CRM system.
3. Installed the cProject Add on in CRM box.
4. Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5. The Project Scenario in PS config has the same name as the Project Type in CRM config.
6. Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya ShrivastavaHello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor. -
11gp1 - JS Error in IE8 : Element not found boot-SHEPHERD-PS1-9296.js
Hi,
I started to get this JS error when I run my ADF applications in IE8. This happens on my PC. I tried clearing cache etc but it didn't help..
It happens even for one page test applications when click a button or link on the page..It works fine with firefox..
Does anyone have any idea ?
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152)
Timestamp: Fri, 7 May 2010 14:27:17 UTC
Message: Element not found.
Line: 5636
Char: 2
Code: 0
URI: http://127.0.0.1:7101/Application9-ViewController-context-root/afr/partition/ie/default/opt/boot-SHEPHERD-PS1-9296.jsThank you, Muhammed.
Yes...
I'm trying with firefox (everything ok), Safari (ok), Chrome (ok), Opera (not supported for Faces), IE7 and IE8 (supported in compatibility mode).
According to this this , it should be supported and certified to run on IE7, but it returns this funny error, related to Javascript. As far as I could guess, it has to do with the Flash properties of faces.
I've tried with 2 different pages:
- the first one contains an ADF DVTGraph and, then, it returns this error when loading.
- the second one contains Panel Accordion (these ones embedded that get minimized when you click on another). This behaviour is Flash, i think, because it is in this moment when it returns the error and not when it is loading.
I don't know if I did mysefl clear... :)
Did you uninstall IE8 and then you tried with IE7 an it worked?? Did you render any DVT component?
I'm incredibly puzzled with this.... Any Idea??
Edited by: juan.aleixandre on 19-may-2010 1:11 -
Automation error element not found in vb6 2147319765 after upgrading the os
Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneerDouble post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin -
Desired wbs/batch not found error
Hi all,
while doing transfer posting, we are getting a error as DESIRED WBS/BATCH NOT FOUND error. what might be the problem.Hi,
Could you please add some details?
Are you trying to settle PM work orders?
Regards
Carlos -
Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.comHello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights -
When configuring libdbusmenu after downloading the PKGBUILD from AUR, I get the following error:
[tharriso@localhost libdbusmenu]$ makepkg
==> Making package: libdbusmenu 12.10.2-1 (Tue Feb 26 21:04:56 CST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found libdbusmenu-12.10.2.tar.gz
==> Validating source files with md5sums...
libdbusmenu-12.10.2.tar.gz ... Passed
==> Extracting Sources...
-> Extracting libdbusmenu-12.10.2.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether NLS is requested... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for intltool >= 0.35.0... 0.50.2 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.16.2
checking for XML::Parser... ok
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking whether gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether make supports nested variables... yes
checking for glib-mkenums... /usr/bin/glib-mkenums
checking for pkg-config... /home/tharriso/ApeInstalled/External/pkg-config/0.22/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for gtkdoc-check... /usr/bin/gtkdoc-check
checking for gtkdoc-rebase... /usr/bin/gtkdoc-rebase
checking for gtkdoc-mkpdf... /usr/bin/gtkdoc-mkpdf
checking whether to build gtk-doc documentation... no
checking gnome-doc-utils >= 0.3.2... no
configure: error: gnome-doc-utils >= 0.3.2 not found
==> ERROR: A failure occurred in build().
Aborting...
Some things I've tried -
[tharriso@localhost libdbusmenu]$ pkg-config --modversion gnome-doc-utils
Package gnome-doc-utils was not found in the pkg-config search path.
Perhaps you should add the directory containing `gnome-doc-utils.pc'
to the PKG_CONFIG_PATH environment variable
No package 'gnome-doc-utils' found
[tharriso@localhost libdbusmenu]$ pacman -Q gnome-doc-utils
gnome-doc-utils 0.20.10-1
Found a few results on Google where people mention the same error with a different package, but haven't found any solutions.
Last edited by harro112 (2013-02-26 12:37:33)checking for pkg-config... /home/tharriso/ApeInstalled/External/pkg-config/0.22/bin/pkg-config
current pkg-config version in arch is 0.28-1 , and should be found as /usr/bin/pkg-config . -
Is anyone else having random file access issues? including "Element not found" error?
I don;t know what the @#$ is going on with this device, but for example:
user A creates a folder in their area(under a share with RW rights)
Everything is great..
They come in on day2, and all of a sudden, they get "Access denied" on the (excel) file
Typically, if I re-apply full rights for them using windows permissions, it "fixes" it.
Today, I went to modify a excel spreasheet that I've been using for a week or so, and boom, access denied
and effective permissions indicate that very thing: no rights.
I attempted to re-apply rights to my home directory, and on that particulat .xls, got a "Element not found" message.
I'm sad that I've had SO much trouble with this device.
I re-sycned with A/D just for kicks, no help.
It syncs with A/D daily
I've had so many of these related permissions issues, we're likel;y scrapping the Lenovo for a windows server, but I figured I'll see if anyone else is dealing with this message..
I'm also open to the fact that it could be our A/D I suppose..Sorry to reply to such an old topic, but I am having exactly the same issue. Did you ever find a fix? We are reapplying all the parent folder settings every morning to bandaid the situation, but it is becoming a little ridiculous...
We have our settings so that a file administrator has full access to everyone's files, and each individual has full access to their own folder. The folder settings never change, but the files seem to lose the user's access permission periodically after being opened or edited (haven't narrowed down the exact cause, but has never happened to files that haven't been accessed, but doesn't always happen to files that have been accessed). One odd thing that might have something to do with it, the ownership of files keeps defaulting to a generic 63353/UNIX instead of the creator of the file or the owner of the parent folder (which is set the way we want). We are currently experiementing with changing it, but it seems ike if we set the owner to the user, the file administrator randomly loses access, if we set to the file admin, the user randomly loses access. I think we might be can bandaid the situation from the user's perspective with this, but it doesn't seem to fix the initial issue, that the folder permissions won't stay set. -
Hi All,
I'm just transferring to my new office that uses FTP as a means of storage for sensitive data. At first i can connect to ftp servers easily using windows explorer. But over time, when i'm about to connect to ftp server, the windows explorer replied
Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access this folder. Details: Element not found
I can access the ftp server using IE or another web browser, even using WINSCP and other ftp file transfer software. I need to be able to connect to ftp server using windows explorer again. Can any of you help?
The ftp.exe is not blocked in firewall rules (i've checked).
Any comments/helps are appreciated.Hi,
Firstly, make sure you have enable "Enable FTP folder view (outside of Internet Explorer)" setting:
Internet options -> Advanced -> Enable FTP folder view (outside of Internet Explorer)
And then try use mapping network drive:
1.Click on Computer.
2.Click on Map network drive from the menu.
3.Map Network Drive window will open. Now click on the link
Connect to a Web site that you can use to store your documents and pictures.
4.Now simply follow the step by step wizard to add a new network location. Select
Choose a custom network location when given the choice of where to create this network connection.
5.Type your ftp address. Specify a user name and password if required.
6.Give your newly created network location.
Alternative, use the registry method that was marked as answer in the following thread to fix it:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/this-ftp-site-cannot-be-viewed-in-windows-explorer/e699d41e-98ae-48c1-9231-d570d46c0f38
Karen Hu
TechNet Community Support -
I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues -
Element not found when trying to change url for httpstunnel
We use DirectAccess 2012 and Windows 7 is able connect via DirectAccess
Netsh dns show state
shows me that I have httpstunnel adapter with a url
According to the following article I should be able to change that url of the httpstunnel which we use for DirectAccess
https://technet.microsoft.com/en-us/library/dd941590%28v=ws.10%29.aspx#BKMK_4
However, when I use the following command
netsh interface httpstunnel set interface https://something.com:443/IPHTTPS none
I get the error "Element not found"
What am I doing wrong here?Hi Mister lks,
Regarding to your question, I’d suggest that we post at Direct Access, UAG and IAG forum. There you can get more effective suggestion by other experts who familiar with Direct Access. Your understanding is highly appreciated.
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=forefrontedgeiag
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Numbers for iPad crashes every time I try to open the date and time keyboard.
I had numbers 1.6.2 installed on my iPad 2 with 5.1.1 I can use every feature without problems, but when I try to open the date time keyboard input method it crashes invariably. I tried to fiddle with language, keyboard, region settings and calendar
-
Default directory for FIle Manager
Hi, I am working on file manager for my final year project. I am using jsp, Tomcat and Linux as OS. The question is, "Is there any way to authenticate users from OS(linux or windows 2000) and how can i set user home directory(e.g. home/sahsan/) to my
-
Advice on importing a 250 page document into indesign 5.5
Hi, My job needs me to put together a fairly large well-designed 250 page book. I currently have the document in a 2007 Miccrosoft Word file. I was trying to read on the Adobe website, as well as on the forums, but I am hoping to get some additional
-
PSA SE to PSE 3.0 Upgrade - No Tags
I just installed PSE 3.0 (full version) and want to maintain the tags I created with PSA SE. Is there a special import function?
-
See question