Error during the BAM reinstallation
Hi,
I entered install.cmd BAM according to the intrucitons specified in README.txt.
During this hostname, port, service and sys password also entered. But after some time it is giving some notification as shown below.
Unable to check for existing ADC
If you have an existing ADC, it must be upgraded manually after the install. If this is a new install, you must manually create a new ADC after the install.
ORA-12154: TNS: could not resolve the connect identifier specified.
It was installed when I clicked ok.
After rebooting the system again I entered install.cmd at the command prompt, this time it is giving error as shown below:
12:20:22.16: Validating BAM schema...
The Oracle BAM Active Data Cache service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
System error 1068 has occurred.
The dependency service or group failed to start.
12:21:15.41: ERROR: BAM schema check failed!
Please check your database and resume installation when ready.
I am eagerly waiting for your valuable information on this problem.
Thanks in advance,
Koti.
Hi Koti,
Your TNSListener was not configured correctly "before" installing the BAM prd. Try
a) tnsping oraclebam
b) tnsping <urDatabaseName>
c) sqlplus orabam/orabam@oraclebam
d) sqlplus orabam/orabam@<urDatabaseName>
All the above should succed. After that, you can try to recreate BAM schema, by running
"cacheinit.exe" from c:\oraclebam\bam dir.
If that does not help, you have to uninstall bam completely, clean up dirs incl some temp dir like c:\bam_install1,. c:\temp\bam* and reinstall
Similar Messages
-
Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.
Error changing modules | Lightroom
-
I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?
Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
RSA1 Error during the retrieval of the logon data stored in secure storage
Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkatHi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun -
Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasantaPl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini -
SMQ2: SYSFAIL Comparison error during the execution of a simple
Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, MartinYou seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek. -
Error during the installation of SAPNetWeaver
i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: ========= ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problemHi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus -
Error during the elaboration of the argument....
Hello to all,
Executing the following code:
Default_Binding_Contact port;
ContactWS_ContactQueryPage_Input qryParam;
qryParam = new ContactWS_ContactQueryPage_Input();
qryParam.pageSize = "100";
qryParam.setStartRowNum("0");
qryParam.setUseChildAnd("False");
qryParam.setListOfContact(new Contact[1]);
qryParam.getListOfContact()[0]=new Client.Contact();
qryParam.getListOfContact()[0].setContactLastName("........");
.contactQueryPage(qryParam);
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
faultSubcode:
faultString: Error during the elaboration of the argument urn:/crmondemand/xml/contact:ListOfContact per l'operazione ContactQueryPage(SBL-EAI-04316)
faultActor:
faultNode:
Why?
thanks for the aidPaste the entires from BCOS_CUST table
Regards
Nick Loy -
Error during the retrieval of the logon data stored in secure storage
Hi guys,
Can anyone help us with this webservice Datasource Transport error.We have already done some Webservice datasources before and successfully transported but never had this error before.
Error during the retrieval of the logon data stored in secure storage.
Thanks
Jay.Hi,
maybe the user is not created successfully.
You can correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
Best,
Stephan -
Error during the installation of permanent license keys
Dear Experts,
When applying SAPLicense following error message is geeting, please help how can i resolve this issue
" Error during the installation of permanent license keys"More information needed.
For example:
Your SAP version?
Is it a system copy?
How exactly did you try to delete from SAP level?
Without this information, nobody here can do anything but guess.
There are a lot of SAP notes about similar problems.
But for this you will have to supply more information.
Or better; Search in SAP notes yourself!
And here is my guess:
SAP Note 917936 - License keys cannot be deleted by user SAP* -
Error during the retrieval of the logon data store Message was Not Created
Dear Gurus,
I got this error while creating support message.
Error in Local Message System: Error during the retrieval of the logon data store Message was Not Created
Message no. BCOS088
Wether this support message will be send to SAP Support or internal sap support team in an organisation.
I am new to SAP BASIS. Kindly explain clearlyPaste the entires from BCOS_CUST table
Regards
Nick Loy -
Error during the retrieval of the logon data stored in secure storage RSAR0
Hi Friends,
during the replication process of a data source I get the error.
"Error during the retrieval of the logon data stored in secure storage" RSAR051
I found note 538052 but this does not help so much.
Can some one help me with this?
Thanks in advance
Rg. JimbobHi,
We are getting the same error when selecting "Customizing Extractors" option in Source System in TCode: RSA1. Please let me know how did u solved the problem.
Thanks. -
Error During the Retrieval of the Logon Data Store
Hello Experts,
In our SAP SCM 7.0 we are receiving error - "Error during the retrieval of the logon data store" in transaction /n/sapapo/cq when i click on the option "Go to SMQ1/SMQ2 by selecting the target system.
Traget system is SAP ECC 6.0
RFC from source to target is working perfectly fine, even the authorization test too is good.
Can you please help me?
Thanks,
SubbuHi Subbu,
Let's check things again:
Match and validate things with this old link;
http://help.sap.com/saphelp_scm41/helpdata/en/57/c42c08b09fe547a2460e1e6a4604f3/content.htm?
frameset=/en/5a/bcdf371babfa0fe10000009b38f842/frameset.htm¤t_toc=/en/9b/954d3baf755b67e10000000a114084/plain.htm&node_id=87&show_children=false
Divyanshu -
In system log shows Error in technical configuration Error during the ret
Hi,
In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>.
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
30808 Dialog work process No. 009 SAPSYS 1 TASK_VITAL_RUN K SAP Web AS Problem SOAP_FT_TOOLS
In wp trace shows below with the matched time:
A Thu May 26 13:08:03 2011
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
H
H Thu May 26 13:08:05 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:09 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:10 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:12 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:13 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:15 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
Kind of error when retrieve the logon data.
Kernel 711 PI system
SP level 04
What possibily casued this? No further information I can have.
Thanks,
EmmaHello
Please implement the latest kernel for your release. See note #19466. The error will not occur with the latest kernel patch.
Regards
Mark
Maybe you are looking for
-
How do I change the default app for opening a file;
If I right click on a file in finder, it tells me what the default app for opening the file is. it also gives me a short list of other apps. I would like to change the defaults for several file types, and also delete one app from the short list and
-
I wish iphone will have an app who can have a private messaging just like in Go Sms :(
its hard for me to hide my messages . I want my mesages to be in private. I wish there'll be an app for that :(
-
Can't create daily job in 3.1 EA2
When I try to create a daily, scheduled job (Scheduler > Jobs), and add a time, the GUI adds this to the Repeat Interval: FREQ=DAILY;BYTIME=000500. Click on Apply, and I get an ORA-27465: invalid value error. If I change the generated Repeat Interval
-
Annoying problem with X-Fi XtremeMu
Ever since I bought it, every once in a while, sometimes more often than others, my sound card will just suddenly go static, and I wont have any sound except the extremely loud, shrilly, annoying noises that it makes in my headphones or speakers. I h
-
My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until