Error during the creation of a Substitution (GGb0)

Dear all,
I'm facing the following problem. I'm tring to create a new Substitution (GGB0).
But when I have tried to create the STEP, the system display this error
" You may not substitute any fields for this Event"
I think that I have to define the fields, but how to do this?
Thanks in advance
Alberto

Hi,
It is probably that the one or both of the following situations
apply:
1)  please check the value for field BEXCLUDE in table GB01 for the
relevant field(s).  If the field has the value X then it cannot be
substituted in the standard system.
Please refer to the attached note 42615 regarding this.
2) please check if any of these substitutions involved a modification
at callup point 3.
See the attached note 386896, where it states:
"As of Release ERP 2004, you can no longer use the source code
corrections as these can cause inconsistencies between the entry
view and the general ledger view.
As of Release ERP 2004 you can also use the AC_DOCUMENT BADI for
postings using the accounting interface."
Reg
Madhu M

Similar Messages

  • BAM Error - during the creation of BAM Activity and View in EXCEL

    I'm getting an error "The Cube could not be created successfully. Please edit the view and validate the inputs" during the creation of BAM Activity and VIEW in MS Excel for BAM
    Error Details:
    Error Description:
    The following system error occurred:  Invalid class string .
    Error Source:
    Microsoft OLE DB Provider for Analysis Services 2008.
    Please help me in resolving the issue. Thanks in Advance!!

    Hi Ramesh,
    Below link has the information related to all the prerequisites for using BAM Add-In for Excel.
    Kindly ensure that you have all the files in place before creating BAM Activity and View.
    http://msdn.microsoft.com/en-us/library/aa560476.aspx
    Rachit
    Please mark it as Answer if this answers your question

  • Error during the creation of notification

    Dear All,
    We are facing the error when we are carrying out the transaction EG90
    for collective creation of notification for device replacement say out of 1000 equipments 998 notifications  were created automatically but for rest two device locations the follwing error comes "internal error during determination of pm plant for device with equipment number  xyz
    error message EG621 .
    I have cheked the master data of the  equipments all maintended properly
    can you give me some idea what coulld be the problem .
    Regards
    chan

    There are quite a few OSS Messages for TCode EG90.
    See if any of them are suitable.
    PeteA

  • Script task error during the creation of partition by reading a table and using AMO - SSAS 2012

    Hi,
    I need to create SSAS (tabular) and process partitions in an authomatic manner. Moreover, the partitioning is respect to a category, an year and a month.
    Category, year and month are resident on a table to read to create the SSAS partitions.
    So, in a SSIS pkg:
    a. I've created a data flow task to read the SQL Server table having category, year and month data,
    b. I've connected the output of the ole db source as the input for a recordset destination, associated to an object variable,
    c. I've used a for each loop container (ado enumerator) specifying the object variable and three variables, for category, year and month,
    d. inside the for each loop container I've created a script task using AMO (visual basic) to control for any existing partitions, if not presents to create the new ones and then to process them.
    For the first iteration, a new partition has been created and processed successfully, but then, for other category, year and month values the script task fails. I've controlled the code many times and I've tried to put returning messageboxes but I've found
    anything. The error is a generic one and no other info are returned.
    Well, any suggests to me in order to solve this issue, please?
    Many thanks

    Hi, thanks, I've solved adding to the code end the SSAS server connection termination.
    Bye

  • Error during the creation of a delivery note

    Hi,
    While creating the delivery, an error is produced when i saw the log . It was as follows
    "An Item with no delivery quantity is not permitted. Item will be deleted"
    The material is unrestricted, not reserved for any other orders except my PO .
    any idea about this error?
    Thanks and regards

    Hi. The issue was solved. It was related with an incorrect value in the material master record (availability check field).
    Thanks and regards

  • Error during the creation of transport request

    Hi
    After collection of the objects in transport connection and clicking on the truck icon. the follwing msg is being displayed and cannot more furthur with all objects.
    Edit objects separately since they belong to different original systems
    after clicking on the display icon...The followin msg is being displayed
    The objects R3TR IOBJ 0SOURSYSTEM und R3TR IOBJ 0LOGSYS cannot be edited together because the 1st object's original is in this system, whereas the 2nd object's original resides in another system.
    Did anyone come across this issue. Plz help me with the solution.
    Regards
    Annie

    Hi
    Sorry for late reply. I did maintain the conversion of logical system name in my production. In my production system, the error is 12 and in method exeuction is:
    Post-import methods for change/transport request: RBDK900062
    Post-import method RSOD_SBEL_AFTER_IMPORT started for SBEL L, date and time: 20070502202742
    Start of the after-import method   for object type(s) SBEL (Metadata Documents)
    Post-import method RS_AFTER_IMPORT started for APCO L, date and time: 20070502202743.
    These are the msgs in method execution after importing.
    Regards
    Annie
    Program terminated (job: RDDEXECL, no.: 20274200)
       See job log
    Execution of programs after import (XPRA)
    End date and time : 20070502203033
    Ended with return code:  ===> 12 <===

  • Error during PO creation "Total BED % rate exceeds 100 % "

    Hi.
    Its concerned to Indian Excice.
    Error during the creation of PO is " Total BED % rate exceeds 100 % " ,
    ( Message no. 8I453).
    And you pls note in J1ID its 16% maintained for that perticular chapter id and its 100% for BED in tax code.
    Can you pls tell me the reason for this error.
    Regds

    Hi Santosh,
    362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
    And For BASB 605 is maintained in the field AltCBV.
    Can you Pls explain the significance of this alternative calculation type.
    Regds

  • Analysis Services failing to Start . File system error: Error occurred during the creation of directory

    Hello All,
    Posting this problem here and hoping for a solution from the experts in this forum.
    When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
    "The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    When Checked the Event Viewer i see the following error -
    The service cannot be started: The following system error occurred:  The filename, directory name, or volume label syntax is incorrect.  File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
    Backup'.
    I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
    Let me know if you need any more details
    SG

    Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
    succeed.
    http://artisconsulting.com/Blogs/GregGalloway

  • ERROR ODI-40837: An error occurred during the creation of the schema

    Hi I am trying to test an xml file server and keep getting the following error.
    ERROR ODI-40837: An error occurred during the creation of the schema: ODI-40738: A SAXException was caught while reading the model saying: Expected 'DOCTYPE'.
    JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml&ro=true&DOD=YES
    anybody could help as i dont find any blog or documentation about this error?.
    Thanks
    Edited by: user626688 on May 31, 2013 1:26 PM

    There seems to be some problem with your xml file. Please work with support channel to investigate this issue.
    You can also check the xml driver parameters details at http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH

  • Concern during the creation of a menu contextual

    Hello has all, I am a french developer using
    Flex/ActionScript for the development of application to work.
    I have a concern during the creation of a menu contextual.
    I have could contater that a contextMenuItem with the value
    “delete” is not posted in my menu contextual.
    Sample :
    var myContextMenu : ContextMenu() = new ContextMenu();
    myContextMenu.hideBuiltInItems();
    var customItemsArr : Array = new Array();
    var item : ContextMenuItem = new
    ContextMenuItem("supprimer");
    item.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,
    deleteHandler);
    customItemsArr.push(item);
    myContextMenu.customItems = customItemsArr;
    on the other hand the same code with a different value that
    to delete will be taken into account.
    Is this an error of my share??
    Does Y have you it of another words which are not to accept
    in a menu contextual (nothing on this subject is specified in the
    api one)??
    thank you for your answer

    Hi,
    It is probably that the one or both of the following situations
    apply:
    1)  please check the value for field BEXCLUDE in table GB01 for the
    relevant field(s).  If the field has the value X then it cannot be
    substituted in the standard system.
    Please refer to the attached note 42615 regarding this.
    2) please check if any of these substitutions involved a modification
    at callup point 3.
    See the attached note 386896, where it states:
    "As of Release ERP 2004, you can no longer use the source code
    corrections as these can cause inconsistencies between the entry
    view and the general ledger view.
    As of Release ERP 2004 you can also use the AC_DOCUMENT BADI for
    postings using the accounting interface."
    Reg
    Madhu M

  • RSA1 Error during the retrieval of the logon data stored in secure storage

    Hi Gurus,
    when i go and check Source system the connection is OK, and RFC's from BI to R/3  and R/3 to BI is OK (including Authentication).
    but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
    All DDIC objects have been activated / deleted
    Post Processing/Checking the Activation for DataStore Object ZDTSYS01
    Creating Export DataSource and dependent Objects
    The creation of the export DataSource failed
    Reading the Metadata of ZDTSYS01 ...
    Creating DataSource 8ZDTSYS01 ...
    Error during the retrieval of the logon data stored in secure storage
    Error during the retrieval of the logon data stored in secure storage
    Error when creating the export DataSource and dependent Objects
    Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
    Error when activating DataStore Object ZDTSYS01
    Deletion of Unused Dictionary Objects ( 3)
    please help me solve this issue
    Thanks in advance
    venkat

    Hi,
    1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
    2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
    On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
    3). Please click on source system and restore the BW source system
    Please check the below 2 SAP Notes.
    538052 and 644015.This might solve your problem.
    Thanks,
    Arjun

  • Throw error during PO creation if a material is not extended to storage loc

    Hi,
    Users require for SAP to throw an error during PO creation if a material is not extended to the storage location that is entered on the PO.
    Presently it neither gives warning or error message.
    Please advise.
    Regards,
    Pratap

    SAP does not validate that, if you want it, then you have to do such check in a user exit.
    SAP can be customized to create the material master storage location segment itself when posting the goods receipt, so it is not necessary to check this in the PO.
    Further this design  speeds up the process, you can already order before others have finished the material master maintenance.

  • Warning: Compiler errors during type creation

    Hello all,
    when I run the following little script in my Oracle 8.1.7 SQL plus spreadsheet I get the following error message:
    "Warning: Compiler errors during type creation". (This is my offhand translation from German, since I have a German version)
    There is no further hint as to what the nature of the error is or how I can fix it, but for sure I can't use the type I tried to define.
    Can anybody help?
    Here is the code:
    set serveroutput on ;
    create or replace type DataPoint as object(
    name varchar2(20)
    create or replace type DataPointList as table of DataPoint ;
    create or replace type ElementType as object (
    TypeName varchar(20),
    Datapoints DataPointList
    create or replace type ElementList as table of ElementType ;
    Regards,
    Norbert Ploett
    null

    create or replace type DataPoint as object(
    name varchar2(20)
    create table DataPointList of DataPoint ;
    create or replace type ElementType as object (
    TypeName varchar(20),
    Datapoints DataPointList
    create table ElementList of ElementType ;
    This should work in the given case
    Ravi
    Regards,
    Norbert Ploett
    Regards,
    Norbert Ploett
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Norbert.Ploett:
    Hello all,
    when I run the following little script in my Oracle 8.1.7 SQL plus spreadsheet I get the following error message:
    "Warning: Compiler errors during type creation". (This is my offhand translation from German, since I have a German version)
    There is no further hint as to what the nature of the error is or how I can fix it, but for sure I can't use the type I tried to define.
    Can anybody help?
    Here is the code:<HR></BLOCKQUOTE>
    null

  • DB2 database connectio error during repository creation

    Hello I am installing Data Services 3.1 on Solaris 9 64 bits, my database is DB2 9.1.
    I ser all my variables but I am geeting one error during the repository creation process
    $ repoman -Usapman -Psapman -Sbwdes01 -NDB2 -QDSREPO -c -tlocal -d -p 5932
    BODI-320006: Cannot open connection to the repository.  The error message from the underlying DBMS is <System call <LoadLibrary> to.
    An error occurred during local repository creation.
    My variables are
    PATH=/etc:/usr/bin:.:/opt/EMCpower/bin/sparcv9:/etc/emc/bin
    LC_ALL=en_US.UTF-8
    LINK_DIR=/software/sapbobje/dataservices
    DB2INSTANCE=QBI
    LD_LIBRARY_PATH=/software/sapbobje/dataservices/bin:/opt/IBM/db2/V9.1/lib32
    Do I missed to define any parameter? Is there any other way to connect DS wit DB2?
    I will appreciate any help, I am doing a POC

    your LD_LIBRARY_PATH should point to 64-bit version of DB2 library, its pointing to 32 bit version
    LD_LIBRARY_PATH=/software/sapbobje/dataservices/bin:/opt/IBM/db2/V9.1/lib32
    what is -p 5932 option ?
    the following is sufficient to create repository
    repoman -Usapman -Psapman -Sbwdes01 -NDB2 -QDSREPO -c -tlocal -d

  • Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

    Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules."  There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

    Error changing modules | Lightroom

Maybe you are looking for