Error during the ddldict for "New Customer Repository"
Hi
We are Upgrading from Siebel 8.1.1.10 to Siebel 8.1.1.11.
IRM wizard shows "Merge completed successfully" but when moving to ddl, it is throwing below error with a message to execute ddldict manually and then restart IRM:
I got this command from the log file sch_dict.log.
ddldict.exe /U sadmin /P ***** /C DBNAME /D SIEBEL /F D:\Siebel\8.1\Tools_1\INNOVATION_PACK\SiebelRepository\ORACLE\ddl.ctl /E Y /A Y /L d:\Siebel\8.1\Tools_1\log\sch_dict.log /N "New Customer Repository" /T DCIR
Error in the log file:
SQLDBUtilityLog SQLDBUtilityLog 3 00000002528c1960:0 2013-11-20 01:30:26 Reading index EIM_CL_SNPSHT_T04 ...
Trace Trace 3 00000002528c1960:0 2013-11-20 01:30:26 DDLDICT-ERR-1017: Unable to copy data from Siebel dictionary (This index points to a non-existing column,
check the logfile under log directory for more information.).
SQLDBUtilityLog SQLDBUtilityLog 3 00000002528c1960:0 2013-11-20 01:30:26 Error in MainFunction (UTLDbDictToDb).
SQLDBUtilityLog SQLDBUtilityLog 3 00000002528c1960:0 2013-11-20 01:30:26 Error in Main function...
GenericLog GenericError 1 00000002528c1960:0 2013-11-20 01:30:27 (logapi.cpp (184) err=1 sys=2) SBL-GEN-00001: (logapi.cpp: 184) error code = 1, system error = 2, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)
When I checked EIM_CL_SNPSHT table from backend, this table is got all columns that are defined in the Index.
Have anyone come across this kind of error ?
Regards,
Suchitra Prakash
Hi,
I had to restore the database and execute the complete DB Upgrade. Second attempt was successful without any issues.
Make sure you have sufficient space in the database tablespace, Temp, Index and UNDOTBS tablespaces.
Hope this answer helps.
Regards,
Suchitra Prakash
Similar Messages
-
I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you. -
Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasantaPl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini -
I have been trying to burn an iDVD for weeks now and the same message pops up every time..."error during the rendering/encoding of the menus/slideshow." What can I do to burn my DVD? thanks!
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.
Error changing modules | Lightroom
-
RSA1 Error during the retrieval of the logon data stored in secure storage
Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkatHi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun -
Error during the elaboration of the argument....
Hello to all,
Executing the following code:
Default_Binding_Contact port;
ContactWS_ContactQueryPage_Input qryParam;
qryParam = new ContactWS_ContactQueryPage_Input();
qryParam.pageSize = "100";
qryParam.setStartRowNum("0");
qryParam.setUseChildAnd("False");
qryParam.setListOfContact(new Contact[1]);
qryParam.getListOfContact()[0]=new Client.Contact();
qryParam.getListOfContact()[0].setContactLastName("........");
.contactQueryPage(qryParam);
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
faultSubcode:
faultString: Error during the elaboration of the argument urn:/crmondemand/xml/contact:ListOfContact per l'operazione ContactQueryPage(SBL-EAI-04316)
faultActor:
faultNode:
Why?
thanks for the aidPaste the entires from BCOS_CUST table
Regards
Nick Loy -
"There was an error opening the database for the library "~/Pictures/Apert"
Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!! -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
Error in the instructions for performing a silent install
There's an error in the instructions for performing a silent install of Photoshop Elements:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
In step 9, the instructions say to use the following command line:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
The correct command line, however, is this:
start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
then it fails to run silently.
I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.Check the response file where you define the SGA memory size for the new database.
You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
Good luck.
Regards,
Enric Moya -
Error message "There was an error opening the database for the library"
I am getting the following error when I try to open my Aperture today: "There was an error opening the database for the library “/Users/xyz/Pictures/Aperture Trial Library.aplibrary”".
I tried doing Option-Cmd while double clicking Aperture, but I can't get to the restore screen. I also tried to use Time Machine to restore the library and am still getting the error. Is there a different way to get to the restore screen??Someone posted in another thread that they needed to create a new library and import the old one in.
-
When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
JimHello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie -
SMQ2: SYSFAIL Comparison error during the execution of a simple
Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, MartinYou seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek. -
Error during the installation of SAPNetWeaver
i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: ========= ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problemHi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus
Maybe you are looking for
-
Error when Bursting - XML Parser expected '-- ' instead of 'EOF'.
Hi, We're generating invoices using BI Publisher as one large XML report, then routing them to customers using the concurrent bursting program to break up the xml by customer and faxing / emailing / printing as needed. the report seems to generate pr
-
Can I exchange my 2nd gen iPod touch to a new one?
I just wanna know if I can exchange my 2nd gen iPod touch to a new one or higher without paying?
-
After SPNEGO is activated other existing services with Technical user not working
Hi All, We have activated SPNEGO, One of our existing service with Technical user is not working. When SPNEGO is disabled it works. Regards Ram
-
I have a video that I have saved onto my computer that I need to import into iTunes. I've tried every way I can think of but the video still won't show up in iTunes. What am I doing wrong? Please help! I'm flying tomorrow and need something to do dur
-
Pipeline namespaces only valid after a set?
If I try to access a pipeline session attribute before called a set method on it, I'm getting the following type of error. Can someone confirm this is either a bug, or that there is a requirement to have "set" something into the pipeline session befo