Error during the migration of Lync 2013 onpremise user to Office 365 Lync
Hi,
I am trying to migrate a Lync 2013 onpremise user to Office 365 Lync in a Hybrid environment.
I am connecting to the Lync server from my machine with the following commands
$lyncOptions = New-PSSessionOption -SkipRevocationCheck -SkipCACheck -SkipCNCheck
$lync = New-PSSession -ConnectionUri https://lyncserver/ocspowershell -SessionOption $lyncOptions -Authentication NegotiateWithImplicitCredential
Import-PSSession $lync
In the next step I am trying to migrate the user to the Office 365 Lync:
Move-CsUser -Identity "username" -Target 'sipfed.online.lync.com' -HostedMigrationOverrideUrl 'https://admin1e.online.lync.com/HostedMigration/hostedmigrationservice.svc'
After that I get a warning message due to to migration to a previous version which I accept.
WARNING: Moving a user from the current version to an earlier version (or to a service version) can cause data loss.
Confirm
Move-CsUser
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): y
Then I am getting the following error message:
Can not load Live Id module. Make sure correct version of Live Id Sign-in assistant is installed.
+ CategoryInfo : NotSpecified: (:) [Move-CsUser], CommonAuthException
+ FullyQualifiedErrorId : Microsoft.Rtc.Admin.Authentication.CommonAuthException,Microsoft.Rtc.Management.AD.Cmdle
ts.MoveOcsUserCmdlet
+ PSComputerName : lyncserver
Tried to Google it but found nothing.
As far as I can see it is complaining about the Live ID Sign-in assistant, which is installed (the 64bit version) on my computer but not on the remote server. Does it need to be installed on the server as well?
Thanks for the answers in advance.
Regards,
Akos
Akos_DB
This error related to reporting services, you need to verify that reporting services is installed on these instances.
Secondly, you didn't need to create this instance manually then setup monitoring role. delete this instance from shared storage and try again to setup rule using different instance name and it will create automatic on shared storage.
You can also refer below link
http://windowspbx.blogspot.com/2012/07/aaa-donotpost-install-lync-standard.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Similar Messages
-
Lync 2013 - Hide users not enabled for Lync from Lync AB
Ok - so here is the environment
Lync 2010 - preparing to upgrade to 2013
Exchange hosted on O365 only, so no exchange schema in the local domain.
There are tons of service accounts and other non-user accounts, as well as disabled users for previous employees that still show up in the Lync AB. I understand how in 2010 to add an attribute and modify the AB behavior to hide users like this, but
I am concerned that when we upgrade to 2013 in the near future, I won't be able to hide these users.
Is there a method to modify the behavior of the Lync 2013 AB service to not grab and index users?You'd want to use ABSConfig for this. Is that what's in place now? Most of the documentation is around Lync 2010 for this, but it is included in the 2013 resrouce kit and should work with 2013.
http://www.justin-morris.net/how-to-hide-users-from-the-lync-address-book/
http://www.microsoft.com/en-us/download/details.aspx?id=36821
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?
There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User. -
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
Application is throwing NSAPI and other errors after the migration
We started seeing NSAPI and other errors after the migration of new codes and recently make some changes
1) During the migration, all the 4 WLS cluster instances were bounced simultaneously. What is the best practice and recommendation from BEA Oracle? Do we need to bounce it one by one for any specific reason?
2) we recently introduced the 4th weblogic cluster instance on Solaris 10 zone. All other WLS instances are running on Solaris 8.
Is it okay to have two different OS versions( Solaris 8 and Solaris 10) and different hardware to host WLS cluster instances? Does BEA Oracle support this kind of configuration?
3) We are consistently seeing below errors in the iplanet web server error logs even though site is working fine
[11/Sep/2009:08:53:50] failure ( 4453): for host XX.XX.XX.XX trying to POST /servlet/FSO, wl-proxy reports: exception occurred for backend host 'YY.YY.YY.YY/23120/0': 'CONNECTION_REFUSED [os error=0, line 1732 of URL.cpp]: Error connecting to host YY.YY.YY.YY.YY:23120'
Do we need to upgrade our WLS proxy plugin? . Current version of WLS proxy plug-in is libproxy_61.so. Our Weblogic version is WLS 92 MP2
I'll really appreciate if some can anwsers those questionsOK booted in to Virtualbox, seems too be working fine this way, maybe it is the ATi drivers
any Help would be appreciated -
Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 77 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.8E774FP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2734)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2750)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2790)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2792)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2840)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2846)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2892)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2894)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2896)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2958)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2980)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2998)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3018)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3020)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3022)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3024)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3026)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3028)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3066)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3072)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3074)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3084)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3094)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3118)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3156)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3158)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3160)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3162)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3164)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3166)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3168)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3172)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3174)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3176)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3186)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3196)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3198)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3214)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed发自我的 iPhone
在 2013年10月14日，6:46，dell 2713 <[email protected]> 写道：
Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
created by dell 2713 in Downloading, Installing, Setting Up - View the full discussion
Exit Code: 6 -
Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.
Error changing modules | Lightroom
-
I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?
Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
RSA1 Error during the retrieval of the logon data stored in secure storage
Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkatHi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun -
Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasantaPl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini -
SMQ2: SYSFAIL Comparison error during the execution of a simple
Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, MartinYou seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek. -
Error during the installation of SAPNetWeaver
i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: ========= ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problemHi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus -
Error during the elaboration of the argument....
Hello to all,
Executing the following code:
Default_Binding_Contact port;
ContactWS_ContactQueryPage_Input qryParam;
qryParam = new ContactWS_ContactQueryPage_Input();
qryParam.pageSize = "100";
qryParam.setStartRowNum("0");
qryParam.setUseChildAnd("False");
qryParam.setListOfContact(new Contact[1]);
qryParam.getListOfContact()[0]=new Client.Contact();
qryParam.getListOfContact()[0].setContactLastName("........");
.contactQueryPage(qryParam);
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server
faultSubcode:
faultString: Error during the elaboration of the argument urn:/crmondemand/xml/contact:ListOfContact per l'operazione ContactQueryPage(SBL-EAI-04316)
faultActor:
faultNode:
Why?
thanks for the aidPaste the entires from BCOS_CUST table
Regards
Nick Loy -
Error during the retrieval of the logon data stored in secure storage
Hi guys,
Can anyone help us with this webservice Datasource Transport error.We have already done some Webservice datasources before and successfully transported but never had this error before.
Error during the retrieval of the logon data stored in secure storage.
Thanks
Jay.Hi,
maybe the user is not created successfully.
You can correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
Best,
Stephan
Maybe you are looking for
-
Is there anyway to turn off the Group MMS texting? I want to send a mass text but don't want every person to see every other person's response. I am getting ready to have a baby and want to send one text out to friends and family when the baby comes
-
How do I permanently transfer photos, video & TV shows from iphone 5 to ipad air?
My 16gb iphone 5 iOS 7.1 is advising my storage is almost full. I've just purchased a 32gb Ipad air wifi iOS 7.1 and would like to permanently transfer my photos & video and downloaded tv shows from the iphone to the ipad, then delete said photos, vi
-
Hi, I need help . I have an application in Sun Java Application Server in SOLARIS, that contain an image with cewolf. But the image do not appear in the application. I tried in windows and the image appear well. How I do to the image appear?? Please
-
Add application and document level events using javascript
Hi All, I need to do some validation in the preprint event of the pdf document. There are samples available using the UI and adding the script in the script dialog, but my requirement is that i need to map the 'preprint' event and event handler to th
-
Dear all, Since we have upgraded to Stack 17 for NW70, the sld can not start anymore. Error message is when trying to start : Application error occurred during request processing. Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transfo