Error during the replication of inbound delivery document to GTS

Hi
While trying to transfer an inbound delivery from the feeder system to the GTS system, I am getting the following error, eventhough the customs document type TRLOIM is assigned to the Feeder sys doc type EL, at application level MM0B in customs management. The inbound delivery document has been maintained with the Prev Doc Type T1 & Prem Doc No in the Foreign trade Data
Customs document type cannot be determined for external document type
Message no. /SAPSLL/API_INBOUND020
Thanks & Regards
Ram

Hi Ram,
Please use OSS note1238850 to fix the issue, this error comes as your doc type EL is not getting transferred when you are sending I/B delivery.
Hope this helps.
Kind Regards,
Sameer

Similar Messages

Error during the creation of a delivery note

Hi,
While creating the delivery, an error is produced when i saw the log . It was as follows
"An Item with no delivery quantity is not permitted. Item will be deleted"
The material is unrestricted, not reserved for any other orders except my PO .
any idea about this error?
Thanks and regards

Hi. The issue was solved. It was related with an incorrect value in the material master record (availability check field).
Thanks and regards

Posting GR against inbound delivery document by MIGO for the movt type 101

Hello Team
To put my question in a simple way, i have changed the subject also. my requirement as below.
In my legacy system GR against PO is happening and the same data is passing to SAP system through PI. Where i need to post GR against the inbound delivery document of that PO.
I followed the below steps
1. i have used idoc mbgmcr03 and copied the FM ZIDOC_INPUT_MBGMCR.
2. In PI system i am doing all relavent mappings.
Now i want to retrieve the inbound delivery document from SAP for the PO which i got from legacy system. Then i need to post the GR against that inbound delivery document. Finally IDOC should gets created with that inbound delivery document details.
So please let me know the procedure to follow to resolve my issue.
Thanks in advance.
Regards
Sree
Edited by: sree@technical on May 11, 2010 5:20 PM

Hi
As far as my experiance with SAP says we don't have any SAP Standard setting to update the entry related to T-code. Internally all the ABAP code reads the t-code and based on the processing type define it execute the code and update the table so that later analysis can be done by which t-code the document got generated

Help Rgd. BAPI for Creation of Inbound delivery Document

Hi all,
I need a Bapi to create inbound delivery document without using PO reference. I have seen the below BAPIs. i) BAPI_IBDLV_CREATE_FROM_OBDLV,
ii) BAPI_GOODSMVT_CREATE. I am not sure whether they are for creating inbound delivery document without using PO reference.
It will be of great use if anyone can give me the BAPI for the purpose and the mandatory parameters or sample test data for the BAPI.
Thanks in Advance,
Rakesh.

If you create the inbound delivery->check the purchase order in the tabstrip "Confirmations" on item level. There are three fields: "Confirmation control key", "Order acknowl." and "acknowl. required".
Ckeck if there is a value in "confirmation control key".
You should get the same error if you try to create VL31N in dialog mode, not only by using the bapi.
Rgds,
JP

BAPI for Creation of Inbound delivery Document

Hi
I have found a BAPI for Creating Inbound delivery Document, BBP_INB_DELIVERY_CREATE. I filled the below parameters and executed it.
IS_INB_DELIVERY_HEADER
    DELIV_DATE                     11.04.2007
IT_INB_DELIVERY_DETAIL
            MATERIAL                       1096
            VEND_MAT
            MATL_DESC                      SHARP CAMERA111
            DELIV_QTY                               795,000
            UNIT                           KG
            PO_NUMBER                      4500000011
            PO_ITEM                        00010
I recieve a error 'This function is only possible for items with confirmation key'.
I dont know whether the error is with the data. Is there any other fields to be filled.
It will be of great help if anyone provide me with any input. ;>)
Thanks in Advance
Rakesh

If you create the inbound delivery->check the purchase order in the tabstrip "Confirmations" on item level. There are three fields: "Confirmation control key", "Order acknowl." and "acknowl. required".
Ckeck if there is a value in "confirmation control key".
You should get the same error if you try to create VL31N in dialog mode, not only by using the bapi.
Rgds,
JP

Delivery Date in Inbound delivery document not correct

Dear all,
I have a question with regards to the wrong delivery date appear in our inbound delivery.
Our inbound delivery is created via EDI output in the outbound delivery of a standard SAP cross company stock transport order. The delivery date in the inbound delivery is not correct from a business point of view.
+The correct delivery date in the inbound delivery document should be [the Actual GI date field in the outbound delivery] + [transport time (i.e. route field) in the outbound delivery].+
Either way (i.e. the Actual GI date field is later/earlier than the planned GI in the outbound delivery), the delivery date in the inbound delivery is also wrong.
Do you have any idea? We have tried to change the inbound delivery type EL by setting a flag (i.e. X) in the rescheduling (TVLK-NEUTE), and it still doesnu2019t work.
Please help.
Thanks.
Tuff

Does anyone know this problem?
appreciate some feedback.

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Error during the retrieval of the logon data stored in secure storage RSAR0

Hi Friends,
during the replication process of a data source I get the error.
"Error during the retrieval of the logon data stored in secure storage" RSAR051
I found note 538052 but this does not help so much.
Can some one help me with this?
Thanks in advance
Rg. Jimbob

Hi,
We are getting the same error when selecting "Customizing Extractors" option in Source System in TCode: RSA1. Please let me know how did u solved the problem.
Thanks.

Archiving inbound delivery documents

hi gurus,
can you help in in archiving inbound delivery documents.
This inbound delivery document is created after purchase order is created with confirmation control.
Pls tell me the programme through which i can do it.
What should i do before doing the archiving.

> archiving inbound delivery documents.
Hi Pavan,
The following link will help you understand the concept of archiving as well the implementation process:
[Data Archiving|http://help.sap.com/saphelp_nw04s/helpdata/en/2b/086f3b6c980c3be10000000a11402f/frameset.htm]
Regards,
Swapna

What is the table for inbound delivery and PO

Hello,
I did one inbound delivery with reference to PO, the SD Documnet Category:7(Shipping Notification/Delivery)
I tried in LIKP,EKBE tables for Inbound delivery and PO relation.
I didnot find, Can i have the table name for findinh the PO and Inbound delivery in one table.
I want to fetch these two documents in to reports.
With regards
Lakki

I am sorry. I misunderstood your requirement. Please ignore my earlier post on this.
But do consider the below option :
You can get both Purchase Order as well as Inbound Delivery details in LIPS.
LIPS-VGBEL = Reference Document ( In this case it would be PO )
Hope this time it helps you.

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error during the replication of inbound delivery document to GTS

Similar Messages

Maybe you are looking for