Error during transfer to demand management in tcode MC88

Hi Expert,
I am getting an error 'No data maintained for material F1475078 plant 2000 in transfer period' during processing transfer to demand management in tcode MC88. Anybody know what is the root caused behind?
I try to search in internet and no solutions have been found so far, I plan to inform basis to restart the SAP server and try whether can solve the problem or not, which is my last option.
Hope to get a solutions from you guys soon.
Thanks.

Hi,
Refer to the below threads, it should resolve your query, else revert.
Error "No data maintained for material XXX plant YY in transfer period"
No data maintained for material MAT1_AJ plant 0001 in transfer period
Re: SOP transfer to Demand Management
Regards,
Vivek

Similar Messages

  • Transfer to demand management - Flexible Planning

    Hi everyone,
    I was wondering whether someone has carried out the next process in the following scenario. I am working with flexible planning in SOP (level-by-level planning and dual level planning type, since I am working with product groups).
    Now I would like to transfer to demand management some data stored in a ratio associated to one field (disaggregated value) in my planning table.
    I tried to do it using the online mode but I just could transfer aggregated level values. I also tried to do it with batch processing (by creating a trannfer profile, then an activity, then a job and finally scheduling and executing the job) but there was an error message that looks like "No dual planning requirements allowed".
    I would be very grateful if someone could give some useful information about how to solve my problem. I guess that someone in this forum has faced this challenge formerly.
    Thanks in advance and best regards.
    Ben.

    Hi,
    Yes, dual level was specified in the MC8A.
    Thanks.

  • Error during transfer of tax Condition JIN1

    Dear All,
    As I create a Sales Order with ref. to Quotation,I get a message in the status Bar mentioned in the Subject line.
    Condition type JIN1 is not maintained in the Sales Document Pricing Procedure but mentioned in the Tax procedure.
    Detailed Error Description:-
    Error during transfer of tax condition JIN1
    Message no. VH807
    Diagnosis
    A condition type is found in the tax determination procedure, which is not available in the current document pricing procedure.
    If I see the JIN1 condition Type detail in the sales order,there is an added option in Control data :- X (Inactive via formulae of incorrect).
    Kindly suggest.
    Best Regards,
    Ankur

    Check in your pricing procedure, whether you have maintained this condition type.  Next check in FTXP whether you have maintained the required percentage against this condition type
    Incidentally, if you are in ECC6, condition type for CST is JIN7 and not JIN1 in which case, check in V/07 and select MWST
    thanks
    G. Lakshmipathi

  • "Error during transfer of tax condition AP4E"

    Hi Guys
    Please help me with the above error log.
    "error during transfer of tax condition AP4E"
    I came across this error whiles trying to create an order.
    How do i resolve this.
    Cheers.

    Hi there
    Include condition type AP4E in the Pricing Procedure .actually this is hapenning when the values of AP4E are flowing from the Tax Procedure to your Pricing Procedure. And in the tax procedure this condition type would be there and in the pricing procedure it might not,
    So please check and maintain that as required.....
    Thanks,
    Raja

  • There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

    HI
    in sharepoint 2013 WFE servers event viewer i receive following error many times
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          4/14/2015 2:23:56 PM
    Event ID:      2303
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.  Some application services may not have been processed correctly.  Please check the configuration for application
    service auto-start for the application(s) assigned to this application pool.  The data field contains the error code.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="32768">2303</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
        <EventRecordID>183840</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
        <Binary>02000780</Binary>
      </EventData>
    </Event>
    adil

  • Error during transfer of tax condition JA1X

    How to resolve this error? This error is appearing when i am copying quotation to sales order and saving the same.The momebt i save the SO ..it gives following error.
    Error during transfer of tax condition JA1X
    Message no. VH807
    Diagnosis
    A condition type is found in the tax determination procedure, which is not available in the current document pricing procedure.
    Bhushan
    Message was edited by:
            Bhushan Shah

    If your tax procedure is  taxinj you have to maintain same condition type in your factory pricing procedure also ja1x is stat condition type.
    check all manual changes of budget legal implication changes and follow master note 1032265

  • SOP and transfer to Demand management for MTO material

    Hi all,
    I have the following situation:
    I have a material, a finished goods product with planning strategy 20 Make to order defined in the material master. I enter a sales forecast for the material in SOP in SAPECC (transaction MC87), works fine.
    But when I try to release the forecast to Demand Management (MC74), I get the following error message: "No requirements type exists for material 110100 1 in plant 2". I can see that planning strategy 20 MTO does not have any requirement type defined.
    But what is the best practice then to forecast on MTO materials (with strategy 20 MTO)?
    What I want to do is to bring down the requirements of the MTO material to Long term planning to get a BOM explosion for the components. I realize that I should not start a production plan for the MTO material, but I want to plan the requirements for components several months ahead.
    What is the best practice? Should I use a different production strategy? Am I missing config or any fundamental thinking here?
    I need to have the material as a MTO strategy, but I want to plan the components.
    Please, give me input on this if you have any solution.
    Regards,
    Lars

    Hi Lars,
    Here's what you need to do:
    1. Instead of pure 20, customize a strategy group that has in it 20 and 10, and attach this strategy group to your material.
    2. In MC74 specify requirements type LSF, demand management version, and make sure to uncheck the "active" box (otherwise you will get requirements in the operative system, and not only in LTP).
    3. Do the transfer, and include the version in a LTP scenario.
    Regards,
    Mario

  • Reg:error during transfer order creation

    hi,
    after quality inspection i move the stock into warehouse integrated storage location. if i clear inspection lot in qa32 for a material after saving it will pop up express message"error during creation of transfer order for a material".i configured that after qc inspection automatic TR is created.i just proceed with manual.
    its a issue related with workflow or configuration....i checked with automatic TO all the things are deactivated.....where i am missing
    Thanks
    Muthuraman.D

    hi,
    goto VOV8
    choose your sales order type
    transaction flow - variant (remove the transaction variant if any)
    but this will remove the transaction variant(custom) which you created , it will take the standard variant for your transaction VA01
    regards
    senya

  • Errors during install of Solution Manager 7.0 w/MaxDB (central)

    Hi
    I am trying to install Solution Manager 7.0 w/MaxDB on a linux box. I have reached phase 47/50 and am running into errors that say:
    ERROR 2011-07-14 16:29:54.609
    CJS-30151  Java process server0 of instance OSM/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
    ERROR 2011-07-14 16:29:54.757
    FCO-00011  The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR ( Last error reported by the step :Java process server0 of instance OSM/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.).
    Here is the java version I am using (JVM 4.1)
    atl-osm-01:osmadm 80> java -version
    java version "1.4.2_30"
    Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.009)
    SAP Java Server VM (build 4.1.009 17.0-b16, May 27 2011 00:12:32 - 41_REL - optU - linux amd64 - 6 - bas2:154157 (mixed mode))
    in the dev_jcontrol log I see:
    -> lib path = LD_LIBRARY_PATH=/opt/java/sapjvm_4/jre/lib/amd64/server:/opt/java/sapjvm_4/jre/lib/amd64:/opt/java/sapjvm_4/jre/../lib/amd64:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/tmp/sapinst_exe.26924.1310559612:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib
    -> exe path = PATH=/opt/java/java/bin:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/sapdb/programs/bin:/opt/java/java/bin:.:/home/osmadm:/usr/sap/OSM/SYS/exe/run:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/opt/dell/srvadmin/bin
    [Thr 47171544096752] JStartupICreateProcess: fork process (pid 5857)
    [Thr 47171544096752] JControlICheckProcessList: process server0 started (PID:5857)
    [Thr 47171544096752] Thu Jul 14 16:29:19 2011
    [Thr 47171544096752] JControlICheckProcessList: process server0 (pid:5857) died (RUN-FLAG)
    [Thr 47171544096752] JControlIResetProcess: reset process server0
    [Thr 47171544096752] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 47171544096752] JControlICheckProcessList: running flight recorder:
            /opt/java/java/bin/java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID3888650 1310675354 -bz /usr/sap/OSM/SYS/global
    In the dev_w12 trace log I see:
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Gateway on host atl-osm-01 / sapgw00
    M  *  ERROR       program SLD_UC not registered
    M  *
    M  *  TIME        Thu Jul 14 16:25:52 2011
    M  *  RELEASE     700
    M  *  COMPONENT   SAP-Gateway
    M  *  VERSION     2
    M  *  RC          679
    M  *  MODULE      gwr3cpic.c
    M  *  LINE        1778
    M  *  DETAIL      TP SLD_UC not registered
    M  *  COUNTER     3
    M  *
    M  *****************************************************************************
    M
    A  RFC 1485  CONVID 80159271
    A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
    A  RFC> ABAP Programm: RSLDAGDS (Transaction: )
    A  RFC> User: DDIC (Client: 001)
    A  RFC> Destination: SLD_UC (handle: 1, , )
    A  *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    [abrfcio.c    8141]
    A  *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    DEST =SLD_UC
    HOST =%%RFCSERVER%%
    PROG =SLD_UC
    GWHOST =atl-osm-01
    GWSERV =sapgw00
    [abrfcio.c    8141]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    B  table logging switched off for all clients
    S  handle memory type is RSTSPROMMM
    Any ideas on how I can fix this? Anything else that I should post that will help with analyzing the issue?
    Thanks in advance!

    Hi Sunny -
    Thank you for your quick response. I will have to ask a beginner's question now, but how do I restart the system manually? Is that just the startsap/stopsap scripts that I need to run?
    How would I know if the server0 is actually up and running after restarting?
    Also, Here is the dev_server0 log (I am posting snippets of the logs as they repeat):
      1
       2 -
       3 trc file: "/usr/sap/OSM/DVEBMGS00/work/dev_server0", trc level: 1, release: "700"
       4 -
       5 node name   : ID3888650
       6 pid         : 5639
       7 system name : OSM
       8 system nr.  : 00
       9 started at  : Thu Jul 14 16:28:59 2011
      10 arguments         :
      11           arg[00] : /usr/sap/OSM/DVEBMGS00/exe/jlaunch
      12           arg[01] : pf=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      13           arg[02] : -DSAPINFO=OSM_00_server
      14           arg[03] : pf=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      15           arg[04] : -DSAPSTART=1
      16           arg[05] : -DCONNECT_PORT=60140
      17           arg[06] : -DSAPSYSTEM=00
      18           arg[07] : -DSAPSYSTEMNAME=OSM
      19           arg[08] : -DSAPMYNAME=atl-osm-01_OSM_00
      20           arg[09] : -DSAPPROFILE=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
      21           arg[10] : -DFRFC_FALLBACK=ON
      22           arg[11] : -DFRFC_FALLBACK_HOST=localhost
      23
      24
      25 [Thr 47057802424304] Thu Jul 14 16:28:59 2011
      26 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.box.number=OSMDVEBMGS00atl-osm-01] [jstartxx_mt. 841]
      27 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.en.host=atl-osm-01] [jstartxx_mt. 841]
      28 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 841]
      29 [Thr 47057802424304] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx_mt. 841]
      30
      31 **********************************************************************
      32 JStartupReadInstanceProperties: read instance properties [/usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties]
      33 -> ms host    : atl-osm-01
      34 -> ms port    : 3901
      35 -> OS libs    : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
      36 -> Admin URL  :
      37 -> run mode   : NORMAL
      38 -> run action : NONE
      39 -> enabled    : yes
      40 **********************************************************************
      41
      42
      43 **********************************************************************
      44 Used property files
      45 -> files [00] : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      46 **********************************************************************
      46 **********************************************************************
      47
      48 **********************************************************************
      49 Instance properties
      50 -> ms host    : atl-osm-01
      51 -> ms port    : 3901
      52 -> os libs    : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
      53 -> admin URL  :
      54 -> run mode   : NORMAL
      55 -> run action : NONE
      56 -> enabled    : yes
      57 **********************************************************************
      58
      59 **********************************************************************
      60 Bootstrap nodes
      61 -> [00] bootstrap            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      62 -> [01] bootstrap_ID3888600  : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      63 -> [02] bootstrap_ID3888650  : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      64 **********************************************************************
      65
      66 **********************************************************************
      67 Worker nodes
      68 -> [00] ID3888600            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      69 -> [01] ID3888650            : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/instance.properties
      70 **********************************************************************
      71
      72 [Thr 47057802424304] JLaunchRequestQueueInit: create named pipe for ipc
      73 [Thr 47057802424304] JLaunchRequestQueueInit: create pipe listener thread
      74 [Thr 1115011392] WaitSyncSemThread: Thread 1115011392 started as semaphore monitor thread.
      75 [Thr 1104521536] JLaunchRequestFunc: Thread 1104521536 started as listener thread for np messages.
      76 [Thr 47057802424304] SigISetDefaultAction : default handling for signal 17
      77
      78 [Thr 47057802424304] Thu Jul 14 16:29:00 2011
      79 [Thr 47057802424304] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
      80 [Thr 47057802424304] CPIC (version=700.2006.09.13)
      81 [Thr 47057802424304] [Node: server0] java home is set by profile parameter
      82         Java Home: /opt/java/java
      83 [Thr 47057802424304] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/OSM/DVEBMGS00/exe/jvmx.jar
      84
      85 **********************************************************************
      86 JStartupIReadSection: read node properties [ID3888650]
      87 -> node name          : server0
      88 -> node type          : server
      89 -> node execute       : yes
      90 -> jlaunch parameters :
      91 -> java path          : /opt/java/java
      92 -> java parameters    : -verbose:gc -Xtrace -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.     engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.eng     ine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Xmn400m -XX:PermSize=2048m -XX:MaxPermSize=2048m -Dorg.omg.PortableInterceptor.ORBInitializerClass.co     m.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
      93 -> java vm version    : 4.1.009 17.0-b16
      94 -> java vm vendor     : SAP Java Server VM (SAP AG)
      95 -> java vm type       : server
      96 -> java vm cpu        : amd64
      97 -> heap size          : 2048M
      98 -> init heap size     : 2048M
      99 -> root path          : /usr/sap/OSM/DVEBMGS00/j2ee/cluster/server0
    100 -> class path         : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
    101 -> OS libs path       : /usr/sap/OSM/DVEBMGS00/j2ee/os_libs
    102 -> main class         : com.sap.engine.boot.Start
    103 -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    104 -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    105 -> framework path     : /usr/sap/OSM/DVEBMGS00/exe/jstartup.jar:/usr/sap/OSM/DVEBMGS00/exe/jvmx.jar
    106 -> shutdown class     : com.sap.engine.boot.Start
    107 -> parameters         :
    108 -> debuggable         : no
    109 -> debug mode         : no
    110 -> debug port         : 50021
    111 -> shutdown timeout   : 120000
    112 **********************************************************************
    113
    114 [Thr 47057802424304] JLaunchISetDebugMode: set debug mode [no]
    115 [Thr 1101179200] JLaunchIStartFunc: Thread 1101179200 started as Java VM thread.
    116
    117 **********************************************************************
    118 JHVM_LoadJavaVM: VM Arguments of node [server0]
    119 -> stack   : 1048576 Bytes
    120 -> arg[  0]: exit
    121 -> arg[  1]: abort
    122 -> arg[  2]: vfprintf
    123 -> arg[  3]: -verbose:gc
    124 -> arg[  4]: -Xtrace
    125 -> arg[  5]: -Djava.security.policy=./java.policy
    126 -> arg[  6]: -Djava.security.egd=file:/dev/urandom
    127 -> arg[  7]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    128 -> arg[  8]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    129 -> arg[  9]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    130 -> arg[ 10]: -Djco.jarm=1
    131 -> arg[ 11]: -Xmn400m
    132 -> arg[ 12]: -XX:PermSize=2048m
    133 -> arg[ 13]: -XX:MaxPermSize=2048m
    134 -> arg[ 14]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    135 -> arg[ 15]: -Dsys.global.dir=/usr/sap/OSM/SYS/global
    136 -> arg[ 16]: -Dapplication.home=/usr/sap/OSM/DVEBMGS00/exe
    137 -> arg[ 17]: -Djava.class.path=/usr/sap/OSM/DVEBMGS00/exe/jstartup.jar:/usr/sap/OSM/DVEBMGS00/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin     /system/bytecode.jar:.
    138 -> arg[ 18]: -Djava.library.path=/opt/java/sapjvm_4/jre/lib/amd64/server:/opt/java/sapjvm_4/jre/lib/amd64:/opt/java/sapjvm_4/jre/../lib/amd64:/usr/sap/O     SM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/tmp/sapinst_exe.26924.1310559612:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib:/u     sr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib:/usr/sap/OSM/DVEBMGS00/j2ee/os_libs:/usr/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/DVEBMGS00/exe:/us     r/sap/OSM/DVEBMGS00/exe:/usr/sap/OSM/SYS/exe/run:/sapdb/programs/lib
    139 -> arg[ 19]: -Dmemory.manager=2048M
    140 -> arg[ 20]: -Xmx2048M
    141 -> arg[ 21]: -Xms2048M
    142 -> arg[ 22]: -DLoadBalanceRestricted=no
    143 -> arg[ 23]: -Djstartup.mode=JCONTROL
    144 -> arg[ 24]: -Djstartup.ownProcessId=5639
    145 -> arg[ 25]: -Djstartup.ownHardwareId=H0868704103
    146 -> arg[ 26]: -Djstartup.whoami=server
    147 -> arg[ 27]: -Djstartup.debuggable=no
    148 -> arg[ 28]: -DSAPINFO=OSM_00_server
    149 -> arg[ 29]: -DSAPSTART=1
    150 -> arg[ 30]: -DCONNECT_PORT=60140
    151 -> arg[ 31]: -DSAPSYSTEM=00
    152 -> arg[ 32]: -DSAPSYSTEMNAME=OSM
    153 -> arg[ 33]: -DSAPMYNAME=atl-osm-01_OSM_00
    154 -> arg[ 34]: -DSAPPROFILE=/usr/sap/OSM/SYS/profile/OSM_DVEBMGS00_atl-osm-01
    155 -> arg[ 35]: -DFRFC_FALLBACK=ON
    156 -> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
    157 -> arg[ 37]: -DSAPSTARTUP=1
    158 -> arg[ 38]: -DSAPSYSTEM=00
    159 -> arg[ 39]: -DSAPSYSTEMNAME=OSM
    160 -> arg[ 40]: -DSAPMYNAME=atl-osm-01_OSM_00
    161 -> arg[ 41]: -DSAPDBHOST=atl-osm-01
    162 -> arg[ 42]: -Dj2ee.dbhost=atl-osm-01
    163 **********************************************************************

  • Error during script logic processing from UJKT tcode

    Hi,
    When I try to execute the script logic through UJKT tcode, it gives me the following exception:
    UJK_EXECUTION_EXCEPTION:Runtime error Duplicate recordMember (D_AUTO_UAE) of dimension (DIVISION) is not a valid member.
    Following is the script logic:
    *RUN_PROGRAM VALIDATION
       CATEGORY = %CATEGORY_SET%
       GROUP= %GROUPS_SET%
       TID_RA = %TIME_SET%
    *ENDRUN_PROGRAM
    BAdi used is BADI_UJ_CUSTOM_LOGIC
    Also the error log displays entire set of data records, instead I will like to see only the status of whether it went successful or not.
    Where can I check this setting?
    Please help.
    Thanks and Regards,
    Pankaj

    Hi Pankaj,
    I would request you to re-process the DIVISION deimension (preferrably all the dimensions). Then re-process and optimize the application. See, if you are getting any errors or not.
    Hope this helps.

  • Error during repeat run for depreciation via tcode AFAB

    hi,
    I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
    1. Field Cost Ctr is a required field for G/L account 4300000
    2. Account 'Expense account for ordinary depreciation' could not be found.
    Appreciate your advise to solve the errors.
    Thanks a lot!
    Hi,
    Appreciate anyone to help me on this issue.
    Edited by: MOHD. FAIZAL OMAR on May 15, 2008 4:38 AM

    Hi,
    The ERP Financials forum would be more appropriate for this topic.
    SAP ERP Financials
    -Paul

  • Error during testing of Funds Management. Error- Message no. FMCF503..

    Hi Gurus,
    I am configuring Funds Mgt for the first time and have encountered some problem. I am trying to create a PO and facing the following error after entering the required Fund Area & Fund Center:
    Budget for all Years using fiscal year-based encumbrance tracking of value type Purchase Orders
    Message no. FMCF503
    Diagnosis
    You have activated multi-year budget for your FM area. This system setting requires the use of period-based encumbrance tracking.
    The documents of value type Purchase Orders in your FM area have not been updated on a period basis up until now.
    Procedure
    Activate period-based encumbrance tracking for the update profile assigned to your FM area or for the value type Budget for all Years.
    Procedure for System Administration
    Define Setting
    As per the error I have done the setting to Period based tracing but still it is providing the error.
    Kindly assist.
    Thanks in advance.
    Regards,
    Prasad A. Wathare.

    Hi Prasad,
    Please, check your customizing in transaction OF39. You should have an entry for value type 51.
    This is the reason for the error message FMCF503.
    BUT you should not activate PBET without knowing the consequences of it. For more details on this, please also refer to the program documentation and SAP HELP chapter Public Sector Management -> Funds Management -> Recording
    Actual and Commitment Data -> Period-Based Encumbrance Tracking.
    You need to be sure that you want to activate multi-year budget based on the business requirements of your company.
    I suggest you to review the need of this customizing and not try to correct the error message.
    PBET activation its an important decision in any company.
    Best Regards,
    Vanessa.

  • Error during upgrade from Deployment manager.

    My OWB 10.1.0.2 design repository is on an Oracle 10.1.0.2 database running on Solaris 9, using WE8ISO8859P15.
    I created a new 10.1.0.2 runtime database with UTF8 character and deployed all the objects successfully.
    But now, when I run the upgrade, it gives me the following error:
    123
    RTC-5351: A serious error occured whilst generating the Impact Report. Please review the Runtime Service Log.
    In the runtime service log, the following message shows up:
    2006/05/07-13:21:58-PDT [16FE0F4] java.lang.ArrayIndexOutOfBoundsException: 123
    at oracle.net.nl.NVTokens.parseTokens(Unknown Source)
    at oracle.net.nl.NVFactory.createNVPair(Unknown Source)
    at oracle.net.nl.NLParamParser.addNLPListElement(Unknown Source)
    at oracle.net.nl.NLParamParser.initializeNlpa(Unknown Source)
    at oracle.net.nl.NLParamParser.<init>(Unknown Source)
    at oracle.sysman.vdb.VdbUtil.findInTNSFile(Unknown Source)
    at oracle.sysman.vdb.VdbUtil.findInTNSNAMES(Unknown Source)
    at oracle.sysman.vdb.VdbUtil.buildConnectDescriptor(Unknown Source)
    at oracle.sysman.vdb.VdbUtil.buildConnectDescriptor(Unknown Source)
    at oracle.sysman.vdb.VdbSession.buildConnectionInformation(Unknown Source)
    at oracle.sysman.vdb.VdbSession.establishConnection(Unknown Source)
    at oracle.sysman.vdb.VdbSession.<init>(Unknown Source)
    at oracle.sysman.vdb.VdbSession.<init>(Unknown Source)
    at oracle.sysman.vdb.VdbAutoCommitSession.<init>(Unknown Source)
    at oracle.sysman.vdb.VdbSessionFactory.getNewAutoCommitSession(Unknown Source)
    at oracle.sysman.vdb.VdbSessionFactory.getAutoCommitSession(Unknown Source)
    at oracle.sysman.vdb.VdbSessionFactory.getAutoCommitSession(Unknown Source)
    at oracle.sysman.cmSDK.CMClient.getDBSession(CMClient.java:479)
    at oracle.wh.runtime.platform.adapter.odb.OdbCMUpgradeAdapter.prepare(OdbCMUpgradeAdapter.java:91)
    at oracle.wh.runtime.platform.service.controller.DeploymentController.prepare(DeploymentController.java:101)
    at oracle.wh.runtime.platform.service.controller.DeploymentController.prepare(DeploymentController.java:27)
    at oracle.wh.runtime.platform.service.DeploymentManager.run(DeploymentManager.java:41)
    at java.lang.Thread.run(Thread.java:534)
    Please help.

    Hi
    Is there any script which was generated by the OWB in the upgrade process?
    Maybe OWB generates a drop and create script instead of alter script.
    But I suggest to you to desing and manage the database modell in a design tool (Deveploper, PowerDesigner, ...) and generate the changes from this tool.
    Ott Karesz
    http://www.trendo-kft.hu

  • Re: Sales forecast transfer to Demand Management

    Hi All,
    I am facing an issue regarding the Sales forecast transfer.
    Actually what is happening is When I Enter some Sales forecast in the combination of a Customer/Payer/SLoc/product /Qty. using T-Code :KEPM  & Then Further I transfer this Sales forecast by t-code KE1K.
    I am able to see the quantities in the MC95 for that particular combination of as chosen while KEPM.
    Now this happening in the right manner in the Quality client.
    But when the user is trying to do the same in PRD client what is happening is the Plan is getting distributed to three location with same quantities which makes the total Sales forecast three times the actual.
    Now I had recommended the user to input the specific data like customer/company code/Profit center & SLOC while KE1K.
    Still he is facing this issue.
    Please advice how to go for this.
    Regards,
    Vivek

    .

  • SOP:transfer to demand management.

    How to transfer the bom collectively in SOP & how tondelete the product group.
    Regards
    bhuvan

    Bhuvan,
    What do you mean by "transfer the bom collectively in SOP"? There is no concept of BOM, but there can be product groups, which can have Product Groups / Materials as members, the lowest level of the product group should contain material as members.
    Product group is nothing but Material master, with material type PROD, so you need to follow the reorganisation process same as the one for material master to delete product group. If you are looking at deleting the members of a product group, then that is possible in the change mode of the Product group transaction.
    Regards,
    Prasobh

Maybe you are looking for