Error during Update with SUM

Dear experts,
I'm trying to install EHP6 for ERP and EHP3 for NW.
After upgrading the Database to 7.9.08_24 the SUM stops during upgrade-phase "PREP_INIT/SPACECHK_INI" I with the follwing Message:
SAPup broke during phase SPACECHK_INI in module PREP_INIT / Initialization
Error Message: put_call_exe call (dbmcli) failed with return code '-1'
I couldn't find any thread with the same or similar error message.
In SDBDBMCLI.LOG I have the follwing message:
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
20109,Open kernel process failed, rc = 5
Another message in the logs:
EXECUTING E:\sapdb\TST\db\pgm\dbmcli.EXE -U c -o I:\SUM\abap\log\SDBDBMCLI.LOG AUTO_EXTEND SHOW
Can you help me please?
Thanks in advance.
Kind Regards
Lu

Hi Guys,
thanks for your answers.
During that SUM process, the DB is running and also SAP.
Connection by R3trans and dbmcli on commandline is possible.
I'm using database studio and the DB is in online state.
Kind regards,
Lu Huynh
Message was edited by: Lu Huynh
Here is another message, what might be a hint:
XECUTION OF dbmclidbm with DBM command='AUTO_EXTEND SHOW'
OS Output File: I:\SUM\abap\log\SDBOSOUT.LOG
DBMCLI Output File: I:\SUM\abap\log\SDBDBMCLI.LOG
put_call_exe call (dbmcli) failed with returncode -1
ACTION : put_ada_get_dbaspace
PHASE  : SPACECHK_INI at 20140904162739

Similar Messages

  • Customer Coversion Using Interface Table - Error during update

    I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
    racudc: ORA-20212: Enter valid Billing Fields.
    ORA-06512: at "APPS.ADVOAR_CUST
    racudc: Error updating customers.
    or
    racudc: updated 1 partiesracudc: Partyrel 1 parties
    racudc: ORA-20210: You have edited one of the following fields, Extended Billi
    racudc: Error updating customers.
    Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
    The following is the test record I inserted for updating the customer I created and ran the customer interface:
    insert into ra_customers_interface
    (ORIG_SYSTEM_CUSTOMER_REF
    ,INSERT_UPDATE_FLAG
    ,CUSTOMER_NAME
    ,CUSTOMER_STATUS
    ,LAST_UPDATED_BY
    ,LAST_UPDATE_DATE
    ,CREATED_BY
    ,CREATION_DATE
    ,ORIG_SYSTEM_ADDRESS_REF
    ,ADDRESS1
    ,CITY
    ,COUNTY
    ,STATE
    ,POSTAL_CODE
    ,COUNTRY
    ,customer_attribute13
    values
    ('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
    ,'U' --INSERT_UPDATE_FLAG
    ,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
    ,'A' --CUSTOMER_STATUS
    ,-1 --LAST_UPDATED_BY
    ,sysdate --LAST_UPDATE_DATE
    ,-1 --CREATED_BY
    ,sysdate --CREATION_DATE
    --,'Y' --PRIMARY_SITE_USE_FLAG
    --,'BILL_TO' --SITE_USE_CODE
    ,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
    ,'1 River Road, Bldg 1' --ADDRESS1
    ,'SCHENECTADY' --CITY
    ,'SCHENECTADY' --COUNTY
    ,'NY' --STATE
    ,12305 --POSTAL_CODE
    ,'US' --COUNTRY
    ,'55'
    I am testing this in 11.5.10 env. Any help on this is appreciated.
    Thanks,
    MK

    Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
    http://www.e-datapro.net/data_conversion.htm

  • Communication channel: error during update

    Hi,gurus:
    We are doring a soap2rfc scenario.
    After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

    hii
    ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
    VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
    Regards

  • ME 808: System error: error during update Table EKAB

    Hi,
    Couple of years ago, during carve out, one of the contracts was deleted.
    A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
    I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
    Can anyone help how to resolve the issue?
    Any body had similar situation?
    Thanks for your help.
    Regards,
    Shiva

    Hi,
    I am not sure how the external consultants deleted this contract during carve out.
    Our division was bought out from another company and moved the data to our SAP system.
    I checked the OSS and found note 922427 could resolve the issue.
    Thanks for your response.
    Regards

  • 403 Error during communication with System Landscape Directory from RWB

    Hi,
    I've got a new install of PI (XI 7.0) SPS 10 and am getting an error whenever I try to access the SLD from RWB or Integration Builder.  The SLD is running on the same server as XI.
    I've been through the various config guides (strangely there doesnt seem to be one specifically for PI/XI 7.0),  to configure RFC destinations, checked users are not locked etc.
    I'm thinking it's probably a VA / Authorisations issue, but could use some ideas!
    Here's a few errors just for reference (and future people searching!)
    <i>
    Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
    Unable to read XI domain from the SLD. Monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
    No System Landscape Directory exists. Unable to generate the landscape
    Unable to read software component versions from System Landscape Directory "my.server:51400" (have tried 8014 also)
    </i>
    Thanks,
    James.

    Hi,
    1) Activated all services
    2)Go to SU01 > type PIISUSER and reset the user's pw
    Check out this might be helpful
    http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
    403 ERROR
    Check this note might help you 961880
    Regards
    Agasthuri Doss

  • Hey, I am getting an error in updating with 'Adobe Application Manager' "There was an error downloading this update. Please quit and try again later."

    Hey, I am getting an error in updating with 'Adobe Application Manager' "There was an error downloading this update. Please quit and try again later." Anyone able to help? Tried restarting etc. No avail.
    I am running Adobe CS5 on my new laptop. Any help would be great.

    @them,
    I'm just a user like you who volunteers my time here. Your technical question requires the response from a support engineer.
    I do sincerely think you'll get a better response by asking in the Downloading, Installing, Setup forum which I referenced in post #3. They have support engineers who monitor that forum for these kind of issues. This forum can only deal with general issues. Sorry.

  • Communication channels error during update

    Hello,
    All the Communication channels of the XI QA system are showing a status "Error during Update"  Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
    com.sap.aii.af.service.administration.api.AdminException: Unable to
    retrieve channel runtime status: EventException:
    com.sap.engine.frame.cluster.message.PartialResponseException: One or
    more of the destinations did not return a response. Response status:
    [303228750-RTOE,303228751-RTOE,303981451-OK].
    Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
    Thanks in advance.
    Regina

    Hi Regina,
    ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
    Thanks,
    Rajeev Gupta

  • Error during update download

    I can't open my itunes
    there was an error during update download

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • Error during communication with System Landscape Directory: HTTP response c

    Dear all,
    I have redirected a SLD to our Q system. Everything in the Repository is working fine. What did I do:
    - Adjusted settings in SLDAPICUST
    - Adjusted SAPSLDAPI
    - Adjusted LCRSAPRFC
    - Adjusted the following values in the Exchange Profile:
    com.sap.aii.connect.cr.httpport
    com.sap.aii.connect.cr.name
    com.sap.aii.connect.landscape.httpport
    com.sap.aii.connect.landscape.name
    So, SLDCHECK works fine.
    The Repository sees the right SLD.
    However, in the Directory I cannot choose an Adapter Engine (leaves blank) in my comm. channel.
    Then I went to the RWB and got the following message:
    <b>Error during communication with System Landscape Directory: HTTP response code: 403 Forbidden</b>
    Where can I change something to make this work? Is this a user verification problem?
    Thanks in advance for your input.

    go through the notes :-
    #764176 Error in XI due to inconsistent SLD contents
    #720717 Reduce the number of System Landscape Directories
    Regards
       Kenny

  • [SOLVED] Error during update of LUKS header on device ./file

    dd if=/dev/zero of=./file bs=1M count=200
    cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
    WARNING!
    ========
    This will overwrite data on ./file irrevocably.
    Are you sure? (Type uppercase yes): YES
    Enter LUKS passphrase:
    Verify passphrase:
    Error during update of LUKS header on device ./file.
    This only happens on my 1TB HDD (GPT, xfs filesystem).  I have 2 SSDs that do not throw the error. 
    I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
    Ideas?
    Last edited by not_sure (2013-03-01 02:50:32)

    Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
    I thought dm-crypt basically did block level encryption.
    I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
    Last edited by cfr (2013-03-01 01:07:16)

  • Error during update of Table VBAP (RC= 4, Key= 5096672)

    Hello experts,
    i am getting error as
    Update was terminated
    System ID....   Q70
    Client.......   999
    User.....   HPROLLSD
    Transaction..   VA02
    Update key...   4EF9258A885201B1E10080000A140014
    Generated....   28.12.2011, 18:08:25
    Completed....   28.12.2011, 18:08:25
    Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
    Please help me on this issue.
    Regards
    Narendra

    Hi,
    Relevant issue,go through the link it could be help you.
    Express document "Update was terminated" received from author
    Ram

  • How to determine different errors during update database with JDBC 2.0

    During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
    in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
    database was not updated.
    When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
    update a Date field with a non-date value, it still displays the same error message.
    How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
    display a different customized message indicating the different errors that occurred during updating??
    Currently, part of my code is as follows:
              int currentRow = rs.getRow();
              String values[] = new String[ rsmd.getColumnCount() ];
              // Initialize values[] begins here:
              for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
                   rs.updateObject( count, values[ count - 1 ] );
              try{
                   rs.updateRow();
              catch( SQLException e ) {
                   System.out.println( e.getMessage() );
                   rs.cancelRowUpdates();
                   rs.absolute( currentRow );
    Can someone please help me solve this problem?? THANKS.. :)

    Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
    William

  • Itunes 10 errors during installation with ipodservice error message

    I have been trying to get itunes 10 installed for weeks. The upgrade would not work normally, so I removed itunes/quicktime/safari and decided try installing fresh.
    I still get a error during the installation process saying that ipodservice.exe cannot execute instruction at 0x7c91b21a referenced at 0x0000000010. memory could not be 'written'
    does anyone know how to fix this?

    i'm getting a similar message. running Windows XP with Symantec AV

  • Microsoft Office 2010 encountered an error during setup: With No error codes/

    Hello Everybody.
    I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
    providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
    I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
    so each attempt is abit time consuming.  Any Ideas out there that might solve issue ?

    Hi,
    First try uninstalling all your Addins include connector to test the result.
    If not help, try the following steps:
    1) Create a new administrator account.
    2) Log on and launch the installer.
    If things don't quite work perfectly now:
    3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
    folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
    4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
    that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
    Sincerely,
    Harry 

  • Errors during install with libraries.

    Hi, i get this errors when i try to install CrossOver Office.
    [jack@GNU ~]$ sh install-crossover-pro-6.0.0.sh
    Verifying archive integrity...OK
    Uncompressing CrossOver Linux Professional
    ./setup.sh: line 173: /home/jack/.setup9272: No existe el fichero o el directorio
    The setup program seems to have failed on x86/glibc-2.5
    Check the system requirements at:
    http://www.codeweavers.com/products/cxoffice/requirements/
    You might be missing the 32bit compatibility libraries
    [jack@GNU ~]$ pacman -Q glibc
    glibc 2.5-8
    Whta's somethings wrong??.:(

    Just to make things perfectly clear, when you say you ran a disk repair from the update disk, do you mean you were booted from the Tiger Installer DVD and ran the version of Disk Utility on that disk?
    I ask for two reasons. First, Disk Utility cannot repair the volume it is run from & you might have mistaken the meaning of a message to that effect if multiple volumes were selected & one was the boot volume. Second, earlier versions of Disk Utility than what is installed with 10.3.9 will report errors on volumes with Tiger installed, & although you say the installation failed, it may be that the volume structure is now ready for Tiger & thus the reported errors are bogus.
    I admit both are unlikely, but it never hurts to be sure.
    Also, be aware that once you do get Tiger installed, TechTools will need to be upgraded. Like the older versions of Disk Utility, TTP v4.0 is not Tiger compatible. See http://docs.info.apple.com/article.html?artnum=301269 for details.

Maybe you are looking for