Error during updating 10.2 software through BB link

when updating through BB link it reaches 40 % and after that a message of ( software update encounterd an error )
i retryed about 4 times and always the same at 40 %
please help

Hey mine stops at 10% ! What did you do? Have you succeeded updating? If you do please tell me how cause I'm frustrated with it !

Similar Messages

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Error While updating C2-03 Software

Getting error while updating software. Error code is 12052

What is the error when you try and restore the phone after connecting to iTunes? Use this support document to decide what to do for specific restore errors. http://support.apple.com/kb/TS3694

Error while updating desktop & device software

I want to update my BB 9780 software (actual software version 6.0 bundle 1306 to bundle 2554) using the desktop software. When initializing the update I get following messages: - an updated Blackberry desktop software component must be installed before you can continue After clicking on install I get following error message: - there was an error updating your software: an error has occured while downloading the BlackBerry Desktop Software. Please try again. I manually re-installed the desktop software but the error keeps on popping up. Tx for Help. Cozze

i tried this one & it worked
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...
or
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB03901&sliceId=2&cm...

Error while Updating the TIN No through DTW

Hi,
When i try to update the TIN Number through DTW .....i'm experiencing the Error--
DELETING ROWS NOT SUPPORTED FOR OBJECT FISCAL ID'S FOR BP MASTER DATA APPLICATION-DEFINED OR OBJECT DEFINED ERROR 65171
My Template is like this....
ParentKey
LineNum
Address
TaxId11
CardCode
LineNum
Address
taxId11
S000001
0
bo_ShipTo
1234567892
What could be the reason for the error..?

Hi,
Please check the following thread:
http://scn.sap.com/thread/1967643

Error while updating my ipod software

Hello.
I own a fifth generation ipod.
I use windows xp. 4 weeks ago when i connected my ipod to my computer a note came up and said that i need to update my ipod software to 1.2.1 version. Every time that i press the install button it starts the process and after a few seconds an error alerting on a problem with the update pops up. since than i can't update my ipod software and as a result the itunes keep telling me that some features will not work on my ipod beacuse i have an old vesion of the software.
Can u plz help me solve my problem???
Thank U all
Eran
pc Windows XP

Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
http://support.apple.com/kb/TS3694#error2

HT4623 what is 3004 error during updating iphone

i have downloaded the ios 7 but during updating it is giving error of 3004. plz guide me

https://discussions.apple.com/thread/4034118

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
          int currentRow = rs.getRow();
          String values[] = new String[ rsmd.getColumnCount() ];
          // Initialize values[] begins here:
          for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
               rs.updateObject( count, values[ count - 1 ] );
          try{
               rs.updateRow();
          catch( SQLException e ) {
               System.out.println( e.getMessage() );
               rs.cancelRowUpdates();
               rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

Can't update iPhone 3G software through iTunes

When I plug my iPhone 3G into my (PowerBook G4) and access iTunes, iTunes alerts me that the OS on my iPhone can be updated to OS4. Just click the "Update" button, it says. But when I do that the message: "This version of iTunes (9.1.1) is the current version." Huhh....????
The current version on my iPhone is 3.1.3. It says OS4 is available. But it seems to think I want to update my iTunes software.
Anyone?
I am going to restart everything again just to see if that helps.
Thanks.

I am running OS 10.4.11. But I don't have iTunes 9.2. I have iTunes 9.1.1. Guess I should update iTunes first. I'll do that now. Thanks, gdgmacguy.

Error during updating 10.2 software through BB link

Similar Messages

Maybe you are looking for