Error during Upgrade advisor Progress "Requested registry access is not allowed. (mscorlib)"

Hello ,
        I have installed " SQL Server 2012 Upgrade Advisor" successfully on my local system. A Successfull connection was establised to SQL Server insatnce on Remote Server through Upgrade Advisor
,On click of Run below error is raised
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)

Yes instance and upgrade advisor version are same (64 bit ).edition of SQL Server is Enterprise Edition (64-bit)
Upgrading from SQL Server 2008 to SQL server 2012.
1) provided with Server Name and component
SQL SERVER was Checked.
2) Clicked on Next , Instance Name and SQL Server Authentication
was selected.
3) Login Ceredentials provided and Clicked on Next.
4) Only one Database to analyze was checked and Clicked Next.
5) On Click of Run below error occured.
On click of Advance Information of error   >> ALL Messages :
===================================
Requested registry access is not allowed. (mscorlib)
Program Location:
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
Log file Error Message :
12/01/2014 17:17:47 UA <Error>System.Security.SecurityException: Requested registry access is not allowed.
   at System.ThrowHelper.ThrowSecurityException(ExceptionResource resource)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
   at Microsoft.Win32.RegistryKey.OpenSubKey(String name)
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetSqlInstances()
   at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.EngineExists()
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.GetAnalyzer(AnalyzerType analyzerType)
   at Microsoft.SqlServer.UpgradeAdvisor.AnalyzerEngine.RunAnalyzer(AnalyzerType analyzerType, String& reportFile)
The Zone of the assembly that failed was:
MyComputer</Error>

Similar Messages

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.

Once in a while i get the error
Event ID 6463
The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
This also happens when i restart the timer service.
I already cleared the SharePoint cache (xml's) but no success with that.
Environment is
SharePoint 2013 SP1 + CU Dec 2014

This is a brand new SP13 with SP1 installation after binaries installation i also installed Dec 2014 CU and then created the SP farm.
The Apppool/Timer account is member of WSS_ADMIN_WPG.
Issue can be reproduced with restarting SharePoint Timer Service.
Hereby the Process Monitor output. Hence i filtered it on NOT SUCCESS and Path contains the word UPGRADE
11:37:57,4244851 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\UpgradeLogLevelOverride
NAME NOT FOUND Length: 144
11:37:57,6632057 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,6632889 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7140763 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7141089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313403 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:59,2026527 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:37:59,2109400 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3534303 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3537846 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3594290 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3597316 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3653094 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3656118 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144

Sharepoint and SSRS integration Error Requested registry access is not allowed.

I have integrated SSRS with sharepoint foundation 2010, it was running fine but suddenly its starts giving me error as -
"An unexpected error occurred while connecting to the report server. Verify that the Reporting Services Service Application mapped to this web application is available OR the report server is available
and configured for SharePoint Integrated mode. --> The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->
Microsoft.ReportingServices.Library.ReportServerDisabledException: The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted
content. ---> System.Security.SecurityException: Requested registry access is not allowed."
Now i am not able to read reports or cant access all database options in sharepoint,it says
registry access is not allowed
I tried to reset encryption key and allowed all access to registry keys buts its giving same error .
Please suggest me what should i do now, i stuck here...

Hi Bhagyashri,
From your description, there have two questions in the environment:
"Requested registry access is not allowed" while access SharePoint sites
and "The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database" while viewing reports
For the first issue, the cause is the SharePoint web service account can't access some registry keys.
For the second issue, the cause is that the report database was restored from another server, and the encryption key was not restored correctly.
To fix the issue, please:
Follow "solutions" in this article
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx to fix "Requested registry access is not allowed"
Restore the encryption key again, or please delete the key and then reset every credential setting in SSRS data source connection
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support

Error at connect :Requested registry access is not allowed

I have a Windows service running as a domain admin connecting with Client 10.2.0.100.
My connection string look as follows :
user id=xxx;data source=xxx;password=xxx;Statement Cache Size=30;Min Pool size=0
This error (Requested registry access is not allowed) only occurs sometimes.
Maybe after the service has been idle for a while???
Thanks in advance,
Philippe

Problem was caused by corrupted user profile. Removing current profile and reinstalling SCORCH solved.
Egils Zonde from Technet

After Feb 2015 CU viewing list items results in error : requested registry access is not allowed

Hello All,
We recently (Monday) updated our farm to the feb 2015 CU. Since then we have been getting calls in from users that cannot access list items. They receive a correlation error. Looking at the logs the correlation error points to a critical
error: "Requested registry access is not allowed"
Doing some googling, others have seen this error but it is usually associated with managed accounts.
Has anyone else encountered this issue/error? Have you found a solution?
Thanks for your help
environment: SharePoint 2013 enterprise : 6 farm servers : OWA : project server : SQL 2012 always on backend

This would be the service account running the Web Application failing to access the registry key(s). What you should do is set up
Process Monitor to look at Registry keys, and look for ACCESS DENIED.
One thing you could just try out would be to run:
Initialize-SPResourceSecurity
Also, do you mean the March 2015 CU?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error on powershell: "Requested registry access is not allowed"

Hi!
Suddenly after reboot all runbooks fail on all .net activities. I tried even an empty powershell single activity, and that too fails with: "Requested registry access is not allowed"
Please help!
Egils Zonde from Technet

Problem was caused by corrupted user profile. Removing current profile and reinstalling SCORCH solved.
Egils Zonde from Technet

Requested registry access is not allowed when opening Infopath Forms on Sharepoint 2013

Hello Technet Community.
I hope this will help anybody out there that experienced this problem after patching Sharepoint 2013.
I have a distributed 3-tier Sharepoint 2013 environment. All of a sudden, after the last round of patched released on 7-Jul-2014, opening Infopath forms would throw a "something went wrong" error.
Looking at the ULS logs, you would see the error "Requested registry access is not allowed.".
I have looked at tons of posts on different blogs, and all pointed out that you need to grant "read" permissions to the application pool user (in my case a service account in AD) to the registry key (and subkeys):
HLKM/Software/Office Server/15.0
That indeed works, but it is not the proper way to do it. You should grant "read" permissions to this local group:
WSS_WPG
And special permissions to this local group:
WSS_ADMIN_WPG
Here is a snapshot of the special permissions needed
By the way, the WSS_PWG local group contains the app pool service account.
I do not know why patching Sharepoint removed these permissions from the registry keys, but oh well...
Anyway, Sharepoint is now happy and Infopath forms work as expected.
Claudio

Check if your service account or infopath service account has access to server and specially registry
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx
To solve the issue, please follow these steps:
Use the Process Monitor to monitor the registry, once you get the following ACCESS DENIED message(You can filter the result with “Result contains Access Denied”):
Date & Time:      <date time>
Event Class:        Registry
Operation: RegOpenKey
Result: ACCESS DENIED
Path:     HKLM\SOFTWARE\Microsoft\Office Server\14.0
TID:        2020
Duration:             0.0000297
Desired Access:                Read
Open Registry Editor (Start > Run, type regedit)
Open key: HKLM\SOFTWARE\Microsoft\Office Server\14.0(got from Process Monitor from step 1)
Assign the SharePoint Timer Service account the Read permission to this key
One can open registry using regedit command. In Registery editor go to
HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\15\Secure\FarmAdmin
Check central administration app pool Identity have permission on FarmAdmin. Permission can be check on right clicking FarmAdmin --> Permissions.
If this helped you resolve your issue, please mark it Answered

ECP not connecting with Edge Tranpost role ("Requested registry access is not allowed,". )

I installed and configured an Edge Transport server.
In ECP under servers if I click to access the Edge Transport server I get a warning message pop up that says "An error occurred while accessing the registry on the server "FQDN". The error that occurred is: "Requested registry access is
not allowed,".
If I answer "Okay" I get the standard info and am allowed to enter a product key which did save. Operation appears normal and mail-flow is functioning.
Any help is much obliged.

Hi,
Agree with Amit Tank, we can use ECP to manage Edge Transport server. However, Edge Transport does not come with a separate EAC or ECP component, and we can manage Edge Transport from the Exchange 2013 SP1 ECP which is CAS 2013 server.
Thanks,
Angela Shi
TechNet Community Support

Requested registry access is not allowed

I have inherited a project from someone who no longer works here. I see how the debugger works in Visual Studio.
My computer has Visual Studio 2012 running on Windows 7. The computer where are application was created runs Visual Studio 2010 on Windows XP.
The program runs in debug mode on the XP computer without any problems.
On my computer it always gets an exception at the point where the registry is accessed.
I have executed the following:
1. Download and install the SubInACL utility.
2.Create a new text file named fix_registry_permissions.cmd and add the following text to it and save it.
cd /d "%programfiles%\Windows Resource Kits\Tools" subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f subinacl /subdirectories
%windir%\*.* /grant=administrators=f /grant=system=f
3. Run the file by double-clicking on it.
I have also executed:
Press WINDOW+R to open the Run window, type "regedit" (no quotes) and press ENTER to execute. If a UAC dialog appears choose Yes to open
the Registry Editor with elevated priveledges.
2. Navigate to HKEY_CURRENT_USER\Software\Classes.
3. Create a new key named ".vbproj"
4. Run VS 2010 as an administrator.
5. Try creating a VB project.
Neither fix works for me.

the project is using C#, WPF. The project can be built successfully and does run on any computer. The only time I get the registry error is when I try to use the debug feature. It always jumps to the exception.
The code is:
            #region read data folder location from registry
try
                regKey = hklm.OpenSubKey("Software\\ThermoGenesis\\XpressTRAK\\Data",
true);
if (regKey.GetValue("DataFolderPath")
== null)
GVariables.dataFolderDir = System.IO.Directory.GetParent(
                            System.Reflection.Assembly.GetExecutingAssembly().Location).ToString();
//create the key
                    regKey.SetValue("DataFolderPath",
GVariables.dataFolderDir);
else
GVariables.dataFolderDir =
Convert.ToString(
                        regKey.GetValue("DataFolderPath"));
catch (Exception
ex)
MessageBox.Show(ex.Message,
GVariables.msgCaption);
if (regKey !=
null)
                    regKey.Close();
return
false;
            #endregion

Error during upgrade from OBIEE 10G to 11G

Hello All
I ran into this issue while trying to upgrade my 10g RPD and catalog to 11.1.1.7
After installing 11G, I launched the upgrade utility from Oracle_Common/bin/ua in linux.
I am getting the below error:
UPGAST-00797: Oracle Fusion Middleware Upgrade Assistant cannot be run from an Application Developer Oracle home.
Based on the Oracle Doc. it has the following desc:
UPGAST-00797: Oracle Fusion Middleware Upgrade Assistant cannot be run from an Application Developer Oracle home.
Cause: The user has chosen to perform a upgrade from an Oracle home that does not allow an upgrade.
Action: None.
Level: 1
Type: ERROR
Impact: Upgrade
So what should I do to resolve this issue?
Thanks in advance

Hi,
First of all i am not familiar on linux box.
I tried in windows environment the rpd is deployed with out any errors.
But i ran the ua.bat file in the following path
\MWHOME\Oracle_BI1\bin\ua.bat.
while i am running in oracle_common\bin\ua.bat is not responding in my local system.
Please Mark if it helpful.
Thanks

Error during precalculation Object variable or With block variable not set.

Hi
We are tyring to set up a precal server for broadcasting. The precal server is running on a windows 2003 server and the service is running under a local admin account.
When we try to run a test workbook, we get the email with the workbook, but there is no data in it.
The Precal server shows us the following log:
Connection transfer server BIPRD service sapgw00 system number
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
S:RSRPREC:000 BIPRD sapgw00 ALEX
Precalculation request type: E, printer: , variant:
Request dispatched to precalculation DLL
S:RSRPREC:000 E ALEX
S:RSRPREC:000 E ALEX
Unresolved exception occurred on the precalculation server
E
Error during precalculation Object variable or With block variable not set.
S:RSRPREC:000 Object[] args String[] paramnames Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
S:RSRPREC:000 DataTable iServerProperties DataTable iVarTable) Boolean[] CopyBack) ALEX
Application server requires status report
Application server requires status report
Has anyone seen this issue?
Please let us know, if anyone has any ideas.
Thanks

Does the query in the workbook require variable input, and, if so, have you provided a variant in the precalculation setting?

Operating unit access is not allowed.check that you have access to OU

Hello,
I am working on supplier conversion. 11i to R12 (Linux). Old DB is 9i and new is 11g. I am getting the below error when i am trying to upload supplier site
msg count2
Status E
Vendor site id
Party site id
Location id
return_status: E
l_msg_data:Operating unit access is not allowed. Please check that you have access to the operating unit: XXLABS Operating Unit, 100
l_msg_data:Operating Unit Info is null
we created a new org 100 and i am trying to create supplier sites in that ORG. We created a site to the supplier from front end but when i try from the back end i get this error. Below is the code
DECLARE
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_return_status VARCHAR2(10);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
l_vendor_site_id NUMBER;
l_party_site_id NUMBER;
l_location_id NUMBER;
l_msg_index_out NUMBER;
BEGIN
mo_global.set_policy_context('S',100);
SELECT vendor_id
INTO l_vendor_site_rec.vendor_id
FROM pos_po_vendors_v
WHERE vendor_ID = 3101;
l_vendor_site_rec.vendor_site_code := 'WOBURN_test';
l_vendor_site_rec.address_line1 := 'XX WEST PARK';
l_vendor_site_rec.city := 'WOBURN';
l_vendor_site_rec.state := 'MA';
l_vendor_site_rec.country := 'US';
l_vendor_site_rec.zip := '01801';
l_vendor_site_rec.org_id := 100;
pos_vendor_pub_pkg.create_vendor_site(
p_vendor_site_rec => l_vendor_site_rec,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_vendor_site_id => l_vendor_site_id,
x_party_site_id => l_party_site_id,
x_location_id => l_location_id);
COMMIT;
DBMS_OUTPUT.PUT_LINE ('msg count'||l_msg_count);
DBMS_OUTPUT.PUT_LINE ('Status '||l_return_status);
DBMS_OUTPUT.PUT_LINE ('Vendor site id '||l_vendor_site_id);
DBMS_OUTPUT.PUT_LINE ('Party site id '||l_party_site_id);
DBMS_OUTPUT.PUT_LINE ('Location id '||l_location_id);
dbms_output.put_line('return_status: '||l_return_status);
IF (l_return_status <> 'S') THEN
IF (l_msg_count > 0) THEN
FOR i IN 1..l_msg_count
LOOP
fnd_msg_pub.get
(p_msg_index => i,
p_data => l_msg_data,
p_encoded => 'F',
p_msg_index_out => l_msg_index_out
fnd_message.set_encoded(l_msg_data);
dbms_output.put_line('l_msg_data:'|| l_msg_data);
END LOOP;
end if;
END IF;
END;
Any ideas????

I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

Error during Upgrade advisor Progress "Requested registry access is not allowed. (mscorlib)"

Similar Messages

Maybe you are looking for