Error during validating Project Mgmt Templ. in Item

Hi Gurus,
I am working with PPM 5.0 and facing an issue while creating a Project from Project template that is assigned to an Item type. In Item detail screen, when I click on "Create Project on saving" check-box and select a particular Project Template, I am getting message "Error during validation of Project management template".
Following are the IMG activities I have done:
(1) Define Portfolio Item type:
- Link to Project system = Portfolio and Project Management
- NoAutoPro = " "
(2) Map Item type to Project Templates:
- Item type to Project template = I have mapped two Project Mgmt templates to one Item type
- Item type to Project type = mapped accordingly
(3) In Base System Interfaces -> Application Object Settings -> Define Object Link Types:
- For all 0RPM* objects, I have mentioned Logical and Destination system as newly created Logical system which is already assigned to system client.
After doing these settings also I am facing the above mentioned error.
Can anyone please guide me where I am going wrong?
Thanks in advance.

Hi Ravi,
Considering above mentioned Object link grouping, I also made the changes in DFM.
Following is the screenshot showing same. Unfortunately still no luck.
<< Object type setting >>
<< DFM settings for obj synchronization >>

Similar Messages

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

Errors during validation

I am trying to burn using iDVD 6 but keep getting an "error during validation" message. There are no warnings in the map menu, and the dvd plays perfectly in preview. No matter what I do, I keep getting this message. Help!

Hi anpak:
Welcome to discussions!
Do you know the rules of chapter markers?
*Make sure no chapter markers are within two seconds of the end of a transition.
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
Does that apply to you?
Sue

JSPM upgrade Error during validation of the dependencies of the selected ho

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Hi,
There is no SDM in NW 7.1. All the deployments have to be carried out by JSPM itself.
Sonali - Can you check the JSPM logs and give complete log ?
Also can u mention the SDA file names ?
Are they standard SAP SDA files or custom files ?
Cheers......,
Raghu

JSPM: Error during validation of the dependencies of the selected hot fixes

Hi,
We have a strange problem, recently we have upgraded our server from XI 3.0 to PI 7.1 and after the upgrade
as part of post upgrade steps I had to deploy few SDA/SCA files, while I am trying to deploy these files
I am getting the error "Error during validation of the dependencies of the selected hot fixes" during the check queue phase and I am not able to go ahead..
As I am facing the same error for three different kinds of SDA files, I was trying to apply SP03 for my
JSPM version 7.11.0.0.119 but even here I am facing the same error.
I am sure that what ever the files I am trying to deploy are correct because these are instructed by SAP.
I guess I have some problem with my JSPM.
Please help me.
Thanking you in advance.
Sonali

Just updated your other post -
Java deployment tools on NW 7.1
Error during validation of the dependencies of the selected hot fixes
Btw, could you check the documents of these SDA files in case there is soem common dependency?

SAP PI 7.3 : Error during validation

Hello Everyone,
I have an error during the validation, and I don't now where is the problem.
The error is :
     <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30"
                                                xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
          <SAP:Category>XIServer</SAP:Category>
          <SAP:Code area="XML_VALIDATION_INB">CX_XMS_SYSERR_VALIDATION</SAP:Code>
          <SAP:P1>com.sap.aii.utilxi.xmlvalidation.impl.XMLValidationException: XML Validation for payload with root element
                                name Orders , target namespace Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the
                                declaration of element 'Orders'.</SAP:P1>
          <SAP:P2>XML Validation for payload with root element name Orders , target namespace Failed!Errors Encountered
                                During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.</SAP:P2>
          <SAP:P3>Schema Not Available in Cache, try to validation with file system schemas. Validation With File System
                                 schemas also Failed. XML Validation for payload with root element name Orders , target namespace
                                  Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.
                                 </SAP:P3>
          <SAP:P4/>
          <SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
          <SAP:Stack>System error occurred during XML validation</SAP:Stack>
     </SAP:Error>
The XSD File for the validation is the following
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://site.be/Commandes" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://site.be/Commandes">
        <xsd:element name="Orders" type="Orders"/>
        <xsd:complexType name="Orders">
                <xsd:annotation>
                        <xsd:documentation xml:lang="EN">DT_Orders</xsd:documentation>
                </xsd:annotation>
                <xsd:sequence>
                        <xsd:element name="ligne" maxOccurs="unbounded">
                                <xsd:complexType>
                                        <xsd:sequence>
                                                <xsd:element name="Field1" type="xsd:string"/>
                                                <xsd:element name="Field2" type="xsd:string"/>
                                                <xsd:element name="Field3" type="xsd:string"/>
                                                <xsd:element name="Field4" type="xsd:string"/>
                                                <xsd:element name="Field5" type="xsd:string"/>
                                        </xsd:sequence>
                                </xsd:complexType>
                        </xsd:element>
                </xsd:sequence>
        </xsd:complexType>
</xsd:schema>
Can someone give me some input to help me to resolve this problem ?
Thanks a lot
JC

How about a slight change to the xsd? Try with the following, it seems to work fine:
<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <xsd:element name="Orders" type="Orders"/>
   <xsd:complexType name="Orders">
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
         <xsd:element name="ligne">
            <xsd:complexType>
               <xsd:sequence>
                  <xsd:element name="Field1" type="xsd:string" />
                  <xsd:element name="Field2" type="xsd:string" />
                  <xsd:element name="Field3" type="xsd:string" />
                  <xsd:element name="Field4" type="xsd:string" />
                  <xsd:element name="Qte" type="xsd:string" />
               </xsd:sequence>
            </xsd:complexType>
         </xsd:element>
      </xsd:choice>
   </xsd:complexType>
</xsd:schema>
You might also find this tool useful for testing such scenarios:
http://xsdvalidation.utilities-online.info/
By the way - how did you get the xsd that you are currently using?

Dump error during reversal of a reset cleared item

Hi everyone,
Please guide to remove a dump error occuring during reversal of a reset cleared item.
Thanks and Regards

Hi Rajendra,
Actually my query is if we reset a payment document.
Then we get a reset cleared document.
If we do FP40, then we dont get any document with amount there in FP40, If we do reversal of reset clearing document then we can get the document with amount in FP40.
At that moment when we reverse the reset clearing document we are facing a dump error.-->
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Transaction (CC = 0002, div. = , MTrans = 0605, SubTrans = 0010) not allowed
Thanks and Regards
Edited by: MPVash Vash on Oct 30, 2008 10:41 AM
Edited by: MPVash Vash on Oct 30, 2008 10:41 AM

Premiere cs6 unknown error during the project manager operation

It appears this is an ongoing issue that needs to be addressed by Adobe.
I remember back in CS3 this was an issue and it still appears to be unresolved. I'm using a Windows 7, HP Z workstation with Quadro FX graphics card, plenty of Ram, with an efficient RAID system. I need to provide a complete project (with files folder & assets in a central folder - maybe even trimmed assets) to my clients. The Project Manager create Trimmed Project continually fails, as well as Collect files and Copy to New Location. Following the Adobe instructions, no screensaver, turn off Premiere Autosave, don't use other programs that will impact machine usage - the results are still the same - unknown error - PLEASE ADDRESS THIS ISSUE ADOBE ! ! ! ! So my question is, When will Adobe address this issue?

This forum is mostly other users, with a "few" Adobe employees
You may need to contact Adobe directly... if some other user does not have a solution
Adobe contact information - http://helpx.adobe.com/contact.html

Error during open project CJ20N

Hi
In my project user have create two WBS on Level 1 when i try to open it on project level system gave me massage "Not All Object were lock" in SM12 their was no lock entries & when i run report in SE38 system gave error massage " Right neightbor does not exist for WBS element ABC-00-000-00
pl gave solution on this
Regards
Prathamesh

Hi
In my project user have create two WBS on Level 1 when i try to open it on project level system gave me massage "Not All Object were lock" in SM12 their was no lock entries & when i run report in SE38 system gave error massage " Right neightbor does not exist for WBS element ABC-00-000-00
pl gave solution on this
Regards
Prathamesh

Getting error during validating in struts

Any one can help me, Iam getting this type of problem
am using validate method of ActionForm to validate my form
i am getting the folowing error after submit
this my code and error
protected boolean isEmpty(String data)
          boolean flag=true;
          if(data.equals(""))
               flag=true;
          else
               flag=false;
                    return flag;
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) {
          ActionErrors errors=new ActionErrors();
          if(isEmpty(getTxtFname()))
               errors.add("Fname",new ActionError("com.nnri.errors.register.required","First Name"));
          if(isEmpty(getTxtLname()))
               errors.add("Lname",new ActionError("com.nnri.errors.register.required","Last Name"));
return errors;
org.apache.jasper.JasperException: can't parse argument number
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:367)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:293)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:286)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:753)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:518)
Please do the needful
Thanks and Regards

Hi Ravi,
Considering above mentioned Object link grouping, I also made the changes in DFM.
Following is the screenshot showing same. Unfortunately still no luck.
<< Object type setting >>
<< DFM settings for obj synchronization >>

How can i find my errors during project validation before burning my project

How Can I find the errors during the project validation before burning the project??

Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

PS-Remoting done in DC's ; but giving error during the validation

Hi
I have done PS-Remoting for DC's through the list of DC's from a AD management server .
Getting the error during validation through the Powershell cmd Enter-PSSession -computer "Dcname"
But when I login to the particular DC from where the above error points, and renabling the PS-Remoting as below
,the Enter-PSSession cmd gives the result correctly
Do I have to login to the DC's in the list one by one and renable as above or how to solve this issue ?
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi,
This is not an issue. This is by design.
The Windows PowerShell remoting features are not enabled on Windows Server 2008 and Windows Server 2008R2 by default.
If we want to use these features, we need enable them by using the command
Enable-PSRemoting –force.
For detailed information, please refer to the link below,
Enable and Use Remote Commands in Windows PowerShell
http://technet.microsoft.com/en-us/magazine/ff700227.aspx
Besides, these features are enabled on Windows Server 2012 and Windows Server 2012R2 by default.
Best Regards.
Steven Lee
TechNet Community Support

Error during resource related billing against service order SM02 type!

Hi,
I have created a service order SM02 type with internal operation and activity type assignment. Confirmed the operation. Did goods issue against the order reservatio. Got actual costs updated.
While running DP90 I am getting a message Character combination W/O Mat. Assign. in DIP profile XXXXXX
and at the message long text
*Key uniquely identifying "a.
Items in a chart of accounts that are relevant to cost, are referred to as cost elements. They are used for entering all costs within the entire cost accounting system.*
And the above mentioned is Information Message . Latter when I enter and proceed I get an error message saying
Error during material determination for sales document item 817702/
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
Kindly suggest me how can I solve this issue.
Regards,
N.Nagaraju

It looks like the DIP Processor cannot determine a material.
Go you your DIP Profile and check the Material Determination settings
Also run TCode ODP2 to check the consistency of your DIP Profile
PeteA

Validation not working during Mass Change of Vendor Line Items

Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep

Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.

Error During creation of Items

guruz,
we are working on Item Conversion.
While creating an item,we'r constantly getting following error from last couple of days,where ERROR MESSAGE is not given [?] :(
How shall we trace the error?
TRANSACTION ID : 620756
ORGANIZATION ID : 204
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : INVENTORY_ITEM_ID
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE :
TRANSACTION ID : 620757
ORGANIZATION ID : 204
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : INVENTORY_ITEM_ID
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE :
Checked in mtl_interface_errors table also,and found no error messages were given in 'ERROR_MESSAGE' column.
Previously, while testing for Items ,this error didn't used to occur ..from last couple of days it has started occurring :(
What is the solution offered on this problem? any clues ?
Its little URGENT.
-Thank You !

Thanks a lot Hussein.
Following are the details;
Application release : R12
Database version : Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
OS : Windows XP
There were no 'logical changes' made in to the code,changes were just cosmetic changes like, 'to make error messages more readable .etc..etc'
Messages from database log file were given in my 1st post itself.Pasting it again,
Start of log messages from FND_FILE
Import Items
Argument 1 (ORG_ID) =
Argument 2 (ALL_ORG) = 1
Argument 3 (VAL_ITEM_FLAG) = 1
Argument 4 (PRO_ITEM_FLAG) = 1
Argument 5 (DEL_REC_FLAG) = 2
Argument 6 (PROCESS_SET) = 1
Argument 7 (MODE) = 1
TRANSACTION ID : 637092
ORGANIZATION ID : 204
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : INVENTORY_ITEM_ID
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE :
TRANSACTION ID : 637093
ORGANIZATION ID : 204
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : INVENTORY_ITEM_ID
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE :
Validation errors occured during Import Item
Refer to table MTL_INTERFACE_ERRORS to access validation errors
End of log messages from FND_FILE
Thanks for 268968.1 ,1339792.1 notes,but it didn't had explanations regarding 'INV_IOI_ERR'.
we are still stucked up on the same point. :(
What could be the other possibilities??
and as 'ERROR_MESSAGE' column is blank, not getting any clues to trace further.
-Thank You !

Error during validating Project Mgmt Templ. in Item

Similar Messages

Maybe you are looking for