Error durring 2.0 update (not activation)

I have no idea what to do. I was updating my phone and in the middle of the update it said an unknown error occurred. I am not having the same problem as everyone else, my phone refused to even accept the 2.0 software and is now unusable at all. It just has the logo that tells me to plug the phone in and thats it. When I plug the phone back in iTunes recognizes it and says its in recovery mode, then, in the middle of recovery I get the same message. I have no clue on what I should do now.

I just uploaded the 2.0 update and everything went smoothly...until it restored the firmware and the phone. It then was going to access the itunes store and that's where the problems started. it timed out and said: "We could not complete your itunes istore request. The network connection timed out. Make sure your network connection is active, then try again,." So I keep trying and it sayd the same thing. Any suggestions? I still have my iphone plugged in to iTunes. but nothing is on it

Similar Messages

  • Qty update not active, function not possible error in MIGO

    Dear all,
    User faces , u201Cqty update not active, function not possibleu201D error in MIGO.
    The receipt is for an STO and the material is split valuated. Qty and value updation is active and already similar receipt has been done for many qty.
    Throw some light on this
    Regards,
    Antony

    Hi Antony,
    Was the material type for the material changed recently? Pls. check the same.
    If the qty update is active for the receiving plant & material type, then there should not be any issue.
    Regards
    Prabhu S

  • User license type 53 - error "User type 53 is not active

    Hi Experts,
    One of our end user is facing this     "User license type 53 - error "User type 53 is not active"   issue.
    Can any one help  me what need to be done for resolve this issue.
    Appreciate your early response.
    Thanks in advance.
    Sreenivasu  Balaka

    User Type 53 is:
    53        mySAP Limited Prof. (Cat III)                          mySAP Business Suite Limited Professional (Cat III)
    Check whether the active user types for both the user ids in these two systems are in sync or not. Also make sure that there is no wrong value is set in SU01 for the user id. Both system should contain same settings for company specific settings.. like ... Company address, Decimal Notation of users, Time Zone of user, License type etc. etc. ...
    Check these things and let us know what you got.
    fyi: User types can be activated in USMM..
    Regards,
    Dipanjan
    Edited by: Dipanjan Sanpui on Jun 15, 2009 6:06 AM

  • Error 109: MaxL API instance not active

    Hello Gurus,
    I am using EPM 11.1.2.1 and I am getting the following error while trying to expand the Essbase server from EAS console.
    Error 109: MaxL API instance not active
    Following are some steps that I have followed:
    1. Checked the environment variables which are set properly
    2. Logged to oracle support and checked for the documentation related to the error but no results.
    3. Moreover I am not able to connect to essbase server using Essbase Addin from Excel - This works after uninstalling and reinstalling Excel Spreadsheet addin
    I am using MS Office 2007 SP2
    4. When it connects to the essbase server from the excel addin, it does not expand the essbase server from EAS console and this happens vice versa
    What I want to know is if there is something that I am missing.
    Any help will be appreciated.
    Thanks and Regards
    Saurabh

    When you say you logged into Oracle Support did you find "Expanding on the Application Node in Essbase Administration Services (EAS) Errors with "Error: 109: MaxL API instance is not active" [ID 1357482.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error message GB554 Substitution Is Not Activated in Selected Application

    Hi,
    I've created a substitution for WBS element by TC GGB1 but when I try to activate substitution by TC GGB4 for Project System the error message  GB554 "Substitution Is Not Activated in Selected Application" appears.
    Could you help me?
    Thanks
    Giovanna

    Hi Giovanna,
    Per my understanding you need to assign the WBS substitution in project profile (Transaction OPSA) in 'Control' tab. You will see a section called 'Substitution' under this tab. Take a dropdown and assign appropriate substitution to corresponding project profile you want.
    Hope this helps.
    Regards,
    Subodh

  • ITunes Error Message: "This person is not active."

    I updated my iTunes version from 9.0.2 to 9.0.3. Anytime I try to do the following in iTunes I get an error message:
    View my account
    Download updates to apps
    Download any songs from the iTunes Store
    I get the same error on my iPhone when I try to update to the latest version of an app or when I try to install a new app.
    In iTunes it shows in red after I put my password in. The error I'm getting is:
    "This person is not active."

    This is Sean. I was able to get this resolved. I had to email iTunes Support here:
    http://www.apple.com/support/itunes/

  • Error: Item(s) was/were not activated due to online payment block

    Hi,
    I have an issue with F-58 transaction.
    When i try processing an open line item of the vendor (in F-58) i get an error "1 item(s) was/were not activated due to online payment block".
    Please advise as to how i can locate the issue.
    Thanks,
    Safi

    Before  that try transaction code MRBR. This should help you in releasing the documents.
    Else
    There must have been a workflow that has been developed for the removal of the payment blocks. Please check up if there is a workflow, it woould have triggered a mail in the SAP inbox to a user. This user will have to release the payment block and you should be able to make the payment. Else you would have to change the configuration and make the field editable and then you will be able to remove the payment block. Until you remove the payment block you would not be able to complete the transaction in F-58.
    Karthik
    Edited by: Karthik Coneru on Sep 17, 2008 12:12 PM

  • In SFP transaction , when i press layout buton , give me error 'Direct display for documents not activated'

    in SFP transaction;
    when i press layout buton , it give me an error.
    SOFFICEINTEGRATION020
    'Direct display for documents not activated'

    Yes i installed .
    One of our product systems , i take  this error but  another one it works correctly . 

  • Running KE27. Getting an error " Condition type XX12 is not active"

    Hi There -
    When running KE27 getting an error Copa Validation:  Condition Type XX12 is not active.
    Appreciate your time.
    Thanks
    Sri

    Hi Sri,
    is this a standard erromessage? Which code (ex: XY123)?
    br, Guido

  • Convert Warning message to error message in counter updation(Not for CTM)

    Dear Experts
    When counter reaading is enterd as previous counter reading then system,gives message of counter overflow,i want to change this message as error message inly ctm login will punch the measuring reading incase there is counter overflow.Please guide how to do this.
    When i clicked on message follwoing pop is shown
    The counter reading entered will lead to a counter overflow                                                                               
    Message no. IR036
                                                                                    Diagnosis
                                                                                    You have entered a current counter reading for measuring point 113 that
        is lower than the current counter reading in the previous measurement
        document ('higher' than in the case of counters that run backwards).
                                                                                    System Response
                                                                                    The system defines this as a counter overflow so that the counter
        reading can continue to increase, or decrease in the case of counters
        that run backwards.
                                                                                    Procedure
                                                                                    Check whether a counter overflow has actually occurred under the
        circumstances.
    Regrds
    Raj

    Hi
    Check in ur customization...
    Plant Maintenance and Customer Service
    Master Data in Plant Maintenance and Customer Service
    Basic Settings
    Measuring Points, Counters and Measurement Documents
    Define Measuring Point Categories
    Select ur category and double click it...
    there u have to maintain wat type message u require.. MeasRge message - W or E
    Check it out
    - Pithan

  • Error: "Component is not active" but component is active

    Hi Experts,
    I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
    "Component XXX_BDB is not active"
    But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
    Component XXX_BDB can't be generated because of errors: see long text.
    (Message no. SWDP_WB_TOOL100)
    According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
    I have checked this thread [Problems when activating ComponentController   |Problems when activating ComponentController; without any effect....
    Does someone have any ideas?
    Thanks in advance,
    Tan

    Hi Thomas,
    where can I check the generation load limit?
    I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
    But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
    Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
    And what about the fact that both applications are running on the source system?
    Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
    Thanks
    Edited by: Tan Yildiz on May 4, 2011 9:26 AM

  • Error *Form F110_PRENUM_CHCK is not active* - while Vendo payment by F-58

    Dear Sir / Mam,
    While possing vendor payment through F-58
    an error "Form F110_PRENUM_CHCK is not active" is appearing
    The document is geting saved but it doesn't get spooled.
    I checked the configuration @ FBZP - Maintenance of company code data for payment method and confirmed that at form data sap script "F110_PRENUM_CHCK" is selected and saved.
    Kindly guide, Ho do I activate F110_PRENUM_CHCK?
    Regards
    Chirag Shah
    Edited by: CHIRAG SHAH on Jan 30, 2012 3:45 PM

    Dear Sir,
    I found the activate option, I executed it saved it and there after again when I am trying to process the payment....
    Oops!
    The problem still continues.
    It still gives the same error that Form F110_PRENUM_CHCK is not active
    Thanks & Regards
    Chirag Shah

  • Error Table /CRYSTAL/PERS_VALUE could not be activated

    Dear expert,
    I'm upgrading BOE to SP3 and then after that SP3 FP3.3.
    I got a problem when upgrading to SP3, it's on BW side when importing Transport Request file:
    Personalization transport (K900693.r21 and R900693.r21)
    The error log is:
    Following objects not activated/deleted or activated/deleted w. warning:
    Table /CRYSTAL/PERS_VALUE could not be activated
    (E- Nametab for table /CRYSTAL/PERS_VALUE cannot be generated )
    Table /CRYSTAL/PERS_VAR could not be activated
    (E- Nametab for table /CRYSTAL/PERS_VAR cannot be generated )
    I've read SDN thread:
    Re: SAP IK Transports Error
    SAP IK Transports Error
    And OSS note:
    1484086 - TABLE /CRYSTAL/PERS_ could not be activated when importing transports for SAP Integration XI 3.1 SP3
    Roland Hoeller says the problem happens when you apply the SP3 transports on a SAP system that never had any SAP IK transport files installed.
    But actually all the BW transport files in the initial installation of BOE XI 3.1 was imported successfully. Including the problematic transport file K900580.R21 and R900580.R21
    It was imported with status 'Warning' below:
    R21K900580        JJI            Business Objects Personalization objects
    And the error log is:
    Following objects not activated/deleted or activated/deleted w. warning:
    Table /CRYSTAL/PERS_VALUE was activated with warnings
    (W- Enhancement category for include or subtype missing )
    Table /CRYSTAL/PERS_VAR was activated with warnings
    (W- Enhancement category for include or subtype missing )
    Then that note advises to use BW transport file from:
    a. previous version (eg. FP2.6) then re-import the problematic SP3 BW transport file
    b. use BW transport file from later Fix Pack (eg. FP3.1, FP3.2, or FP3.3)
    Since i'm upgrading to FP3.3, i go with option (b).
    But i notice that in the installation files of FP3.3 there's no file K900693.r21 and R900693.r21 in the extracted folder 'transport'.
    The installation file i used is:
    BOBJINTGRSAP03P_3-10007514.EXE
    I even checked (FP3.2 and 3.1) but that file is not there too.
    BOBJINTGRSAP03P_2-10007514.EXE
    BOBJINTGRSAP03P_1-10007514.EXE
    How to get the correct K900693.r21 and R900693.r21 files?
    Thank you very much.
    Kind regards,
    aswin

    Dear Stratos,
    I found out the answer for this.
    Apparently in new FP release (eg. FP3.3), SAP replaced that TR:
    R21K900693        JJI            Business Objects Personalization objects
    with:
    R21K900705        JJI            Business Objects Personalization objects
    That's why it no longer exists.
    Kind regards,
    aswin

  • Source system not Active error while installing BI content cube

    Hi.,
      When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues.  In source system assignment of BI content the source client is also checked. Please give me a solution.

    Hi Selva,
    If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
    Regards,
    Kams

  • Java is not active in the application server

    Hi Experts
    We recently installed CRM 5.0.  Everything seems to have installed without any issues. 
    However, we are having a few issues the Java Virtual Machine (VMC). 
    When trying to access the VMC through ABAP side of CRM (SM53), it gives and error message that "Java is not active in the application server". 
    Eventhough everything seems to have been installed.
    Any ideas on how to activate java. 
    Any help would be really appreciated.
    Thanks
    Imran Khan

    Hi Daniele:
    There are indeed only 3 parameter additions
    vmcj/enable = on
    vmcj/option/ps = 512M
    vmcj/option/maxJavaHeap = 200M
    The 4th one is just explanation for calculating sizes.
    My VMC is active with only the above three settings.
    Also make sure that the SP level for both the JAVA components and ABAP components is the same.  i.e. they are both running on the latest version.  The latest update was released in Late April.
    If the SPs are from differnt releases, the VMC will not work.
    Also, go into the server and have a look at the parameter file to make sure that settings are actually there. i have found out that settings  in RZ10 and the real parameter settings can be different.  Just make sure that the settings you want the system to take are indeed in the real parameter file.
    I am not sure what else you can do...but rest assured that the thing works with the above mentioned settings.
    Imran

Maybe you are looking for