ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.

I already changed the destination folder(SEVERAL TIME) but this keeps coming up, seriously whats the problem?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

Similar Messages

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist... Help!

Some time ago my mac crashed and wouldn't startup. So my Son went into the windows side of it and he managed to repartition the harddrive leaving the one partition with loads of memory. It has been working perfectly fine up until now. It gets to 2% and then the installation fails. The only drives I have on my computer is a (C:) and (G:) so I don't know why this (D:) Keeps coming up and affecting the installation?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

ERROR: DW041: INSTALLDIR Volume K:\ doesn't exist.

What can i do?
It come's everytime when the install is at 2%..:(

Do you have some type of custom configuration? What operating system are you using? Finally which Adobe software are you trying to install?

Error DW041: installdir Volume H:/ does not exist

When installing Dreamweaver above mentioned error pops up and cancels the installation.
The installation drive is C:program files (x86).
Where does H:\ come from?
How to solve this?

Hi,
Please follow this KB article
http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-drive.html
Please let me know f it helps.
regards,
Abhijit

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

Error code ws-36787-1 doesn't exist??? *****?

So i linked my Facebook account and uploaded my profile pic,After a week i lost all real names and pictures from all my friends and i cant use my own anymore.Got an email from scee saying it doesn't warrant a punishment, yet i constantly get error code ws-36787-1 whenever i even try to send a real name or close friend request and when i search the error code pages on here the code doesn't exist???? I've sent a message to sony but they just ignore me.Can any1 help a desperate girl out, please.?

Ask Playstation said this about it to someone else - https://twitter.com/askplaystation/status/582793804635377664 It's worth a try I guess, it can't hurt anyway. Did you get the email from sony as a reply to one you'd sent or they just emailed you? (OP)

Installation & update error : config.msi\PTA9D.tmp doesn't exist

Hi,
I have this recurrent error telling me C:\config.msi\PTA9D.tmp doesn't exist, I tried to install the new vesion instead of just updating but it doesn't work.
My actual version is reader 10.1.2 french installed the 01/13/12
Thanks a lot

What is your Windows version?
Can you try to right-click on the downloaded installer, then select Run as Administrator.
If that still does not do the trick, can you try downloading the MSI installer (10.1.0, French version) from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.0/fr_FR/AdbeRdr1010_fr_FR.msi
then run the update patch http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.3/misc/AdbeRdrUpd1013.msp

TypeError: Error #1010 on code that doesn't exist.

Hello all,
I have a drop down menu with 7 options. The menu is a movie clip with a mask that reveals each of the buttons when a person mouse_overs the menu button. Each menu option does the same thing, it will call a function based on the button clicked. The function for each button does the same thing:
function INDEX_Safety (e:MouseEvent):void
          play();
          INDEX_SAFETY=true;
          Sound_Stopper ();
Each of the functions will change the value of its respecive boolean variable. One for each button. Sound Stopper is a function that stops any FLV Sound that is currently playing.
When it goes through play() it will come to a particular frame that has:
Index_Jumper ();
this function determines which boolean has been set to true, and does a gotoAndPlay("Label Name") based on the boolean that has been set to true. Then sets the boolean back to false.
function Index_Jumper ():void
          if (INDEX_SAFETY==true){gotoAndPlay("Safety"); INDEX_SAFETY=false;}
          if (INDEX_TOOLS==true){gotoAndPlay("Tools and Positions"); INDEX_TOOLS=false;}
          if (INDEX_METHODS==true){gotoAndPlay("The Methods"); INDEX_METHODS=false;}
          if (INDEX_METHOD1==true){gotoAndPlay("Method 1"); INDEX_METHOD1=false;}
          if (INDEX_METHOD2==true){gotoAndPlay("Method 2"); INDEX_METHOD2=false;}
          if (INDEX_TDBL==true){gotoAndPlay("Installing TDBL"); INDEX_TDBL=false;}
          if (INDEX_RAISING==true){gotoAndPlay("Raising the Stand"); INDEX_RAISING=false;}
The issue i am having: When i click on the 6th option, TDBL, i get the error:
TypeError: Error #1010: A term is undefined and has no properties.
          at RaisingtheOperatorsPlatform_fla::MainTimeline/frame147()[RaisingtheOperatorsPlatform_fla. MainTimeline::frame147:10]
It says frame 147:10
From my understanding this means the 10th line on Frame 147.
This is my frame 147:
1. stop ();
2. Caption ();
3. IndexMC.Safety_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Safety);
4. IndexMC.Tools_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tools);
5. IndexMC.Methods_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Methods);
6. IndexMC.Method1_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method1);
7. IndexMC.Method2_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method2);
8. IndexMC.TBDL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
9. IndexMC.Raising_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Raising);
I dont have a 10th line.
also, when i click the 7th option, nothing happens. However, options 1 - 5 on the drop down menu work just fine.
Thanks for any insight.

Right after posting that, I got an idea to try adding the following to frame 1:
addEventListener(Event.ENTER_FRAME, Frame_147);
function Frame_147 (event:Event):void
          if (currentFrame==147)
                    stop ();
          Caption ();
          IndexMC.Safety_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Safety);
          IndexMC.Tools_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tools);
          IndexMC.Methods_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Methods);
          IndexMC.Method1_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method1);
          IndexMC.Method2_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Method2);
          IndexMC.TDBL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
          IndexMC.Raising_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Raising);
I then commented-out frame 147.
the error i got pointed to line 36 of frame 1, which is:
IndexMC.TDBL_Menu_Button.addEventListener(MouseEvent.CLICK, INDEX_Tdbl);
Being able to focus on this, i see that i have IndexMC.TBDL instead of IndexMC.TDBL, i think this was one of those "been looking at this thing for too long" errors. Thank you for looking into this, the problem is now solved. As for the error pointing to a line that doesn't exist:
I still have no idea why it would say the issue was frame 147:10

Error in loading Target table doesn't exist in target schema

I am having the following error to load data to the target
table: Connection failed to HR_TGT.orders ora-000942.
'Table or view does not exist'
The table exists and the odi super user has all the priviliges
over tables in HR_TGT.
What could be wrong with my configuration

I am using the original Oracle Integration KM.
My Replicat doesn't start any longer
Here are my configuration files
Source Files
ODISC.prm
extract ODISC
userid OGATE, password OGATE
exttrail C:\GGSRC/dirdat/ODISoc/oc
TABLE HR_SRC.ORDER_LINES;
ODISD.prm
defsfile C:\GGSRC/dirdef/ODISC.def, purge
userid OGATE, password OGATE
TABLE
HR_SRC.ORDER_LINES;
Target Files
C:\ggstg\diroby\ODIT1T.oby
dblogin userid OGATE, password OGATE
add checkpointtable ODIW.ODIOGGCKPT
add replicat ODIT1A1, exttrail C:\GGSTG/dirdat/ODIT1op/op, checkpointtable ODIW.ODIOGGCKPT
stop replicat ODIT1A1
start replicat ODIT1A1
C:\ggstg\dirprm\ODIT1A1.prm
replicat ODIT1A1
userid OGATE, password OGATE
discardfile C:\GGSTG/dirrpt/ODIT1.dsc,
purge
source defs C:\GGSTG/dirdef/ODISC.def
map HR_SRC.ORDER_LINES, TARGET HR_STG.ORDER_LINES, KEYCOLS (ORDER_ID, PRODUCT_ID);
map HR_SRC.ORDER_LINES, target ODIW.J$ORDER_LINES, KEYCOLS (ORDER_ID, PRODUCT_ID, WINDOW_ID), INSERTALLRECORDS, OVERRIDEDUPS,
COLMAP (
ORDER_ID = ORDER_ID,
PRODUCT_ID = PRODUCT_ID,
WINDOW_ID = @STRCAT(@GETENV("RECORD", "FILESEQNO"), @STRNUM(@GETENV("RECORD", "FILERBA"), RIGHTZERO, 10))
I have deleted the extract ODISC and ODIT1P as well as the checkpionttable ODIW.ODIOGGCKPT
Recreated the items.
I did same thing with the replicat ODIT1A1
The extracts had always started with little difficulties but the replicat once started but didn't transmit integrated data to
the target.
Now it is not starting at all.
I have deleted and recreate it but the same results

Sync error because of app that doesn't exist

Everytime I try to sync my iPhone 3Gs, I get an error that says...
There was a problem downloading the artwork for "Insert app name here".
Please try again by choosing "Check for Available Downloads" from the Store menu.
This app is not installed on my phone, it doesn't show up in iTunes on my app list, and it no longer exists in the App Store. I have OS 4.0 and my iTunes is updated. Because of this, I am completely unable to sync my phone and it is really getting annoying. Is there a folder or something I can get into to delete all traces of this app?

Contact itunes support & have them clear your download queue:
http://www.apple.com/support/itunes/

Volume that doesn't exist shows up in the /Volumes directory

I have the following problem:
I have very slow selection dialogs, in particular when I'm running Parallels (having to wait 2' for selecting a file). The interesting thing is that the problem disappears as soon as I connect to my NAS at home.
I looked into the volumes mounted and always see the volume /Volumes/admin in the /Volumes directory. This is a partition of my NAS but it always shows up even if I start up without any network connection.
I tried to unmount the volume using
sudo diskutil umount force /Volumes/admin
and
sudo umount -f /Volumes/admin
but I get the following error messages:
Unmount failed for /Volumes/admin
and
umount: pthread_cond_timeout failed; continuing with unmount: Operation timed out
umount: unmount(/Volumes/admin): Operation not supported
I also tried to see if there I can find that the Volumes is somewhere automounted but I wasn't successful in this either.
Anyone having an idea how to resolve the problem?
Thanks
Michael

Sometimes that happens when the server gets "lost."
That admin directory is likely a real directory, not a mount point. If so, things you copied into it may not be on the NAS as you think and only copied locally into that folder.
If it is a real folder, you should be able to delete it like any other folder, but may have to resort to the terminal to delete it. Check for any files in it, first. Copy off what you want to recover, and then try to delete it.
I'm not sure how to tell the difference. If you use Go to Folder in the Go menu, type /Volumes and click Go.
See if it looks like a folder and not an external disk. I'm not sure this will tell you anything as it was originally created as a mount point. However, if your NAS is not connected, then it is likely just an orphaned mount point.
If you mount you NAS, do you see admin-1 mounted, also?

Error Checking File System that doesn't exist anymore [Solved]

I had been dual booting Arch and Ubuntu on my desktop and recently decided to ditch ubuntu and experiment with slackware. I also decided to take advantage of the reinstall to clean up my partition scheme.
The old:
sda1 ntfs windows
sda2 fat32 shared data
sdba5 swap
sdb1 ext3 Arch's root
sdb2 ext3 Arch's home
sdb3 reiser Ubuntu home
sdb4 logical partition
sdb5 reiser Ubuntu's home
sdb6 ext3 used to be shared /boot, but only Ubuntu had been using it since last Arch reinstall
The new
no changes to sda or Arch's partions
sdb3 ext3 Slackware root
sd4 ext3 Slackware home
Slackware is working fine, but when I try to boot up Arch I can only get to where it checks the filesystem, sdb1 and sdb2 check clean, then it tries to check sdb5 and obviously isn't finding this to be clean. When it drops me to the terminal I my old partitions and sdb4 are clean. sdb3 gives me an error saying it can find the reiser journal (don't have the exact wording but it obviously thought this should be a reiserFS not ext3) but if I do fsck.ext3 instead of just fsck it says it's clean.
It's probably relevant that my last few boots before the slackware install were complaing that my ubuntu partitions weren't clean, which kind of confused me since I didn't even mount those in Arch but I didn't bother fixing it since I was planning on reformatting them when I installed slackware and I could still boot into Arch unlike now. I'm wondering if Arch is still complaining about them not being clean from before I reformatted.
Can someone help me convince Arch to let me boot again?
Last edited by mcmillan (2007-08-07 16:23:54)

Have you changed fstab on Arch's root partition?
Use some LiveCD (even Arch's installation CD will do) to do so.

Error Message: Disk Cache folder doesn't exist

I know this has already been asked, but I am aware that I HAVE deleted the disk cache folder by accident, and it is no longer in the recycle bin. Is there anywhere i can go to restore the Disk Cache folder, or redownload it? How does it affect me to work without it? Thanks

Just create a new folder and point to it in the preferences. It's as easy as that.
You could also delete your preferences, re-launch, and everything should be restored.

CS6 installation failed - Volume E: does not exist

Having previously had CS6 on E: drive with the WinXP 32bit OS, I have recently upgraded to a SSD anbd it's now my C: drive. I then did a clean re-instal of everything. However CS6 fails to install with 8 warnings and an error - InstallDir Volume E: does not exist. I have no idea why and the xit code tells me nothing. Is there a way to get around this?
The full warning page looks like this:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW041 ... WARNING: DW022, DW024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 8 warning(s)
WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} NonAdobePayload Acrobat Professional 10.0.0.0 with version (2012-03-05 04:03:46.684000) already installed with incompatible version (2011-03-06 22:43:17.708000)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0
WARNING: DW065: Display requirements not met for {A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E} Adobe Dreamweaver CS6 12.0.0.0
WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
ERROR: DW041: INSTALLDIR Volume E:\ doesn't exist.

properly uinstall cs6.
run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer
install cs6 to its default location.

When creating po, pop up error message 'address doesn't exist'.

when creating po via me21n, when click delivery tab screen, pop up error message dialog box 'address doesn't exist T001 wsu20 00010'. message no is 'am010'. then i was forced to exit transaction.
ps: 'su20' is my plant, but in me21n, when selecting plant, i can see two 'su20', the diffrence is International address version. why there is two same plant

go into customizing and maintain an adress by clicking the envelope button in the detail to the plant. The adress in the customizing views itself is not sufficient.

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.

Similar Messages

Maybe you are looking for