Error DW041: installdir Volume H:/ does not exist

When installing Dreamweaver above mentioned error pops up and cancels the installation.
The installation drive is C:program files (x86).
Where does H:\ come from?
How to solve this?

Hi,
Please follow this KB article
http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-drive.html
Please let me know f it helps.
regards,
Abhijit

Similar Messages

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist... Help!

Some time ago my mac crashed and wouldn't startup. So my Son went into the windows side of it and he managed to repartition the harddrive leaving the one partition with loads of memory. It has been working perfectly fine up until now. It gets to 2% and then the installation fails. The only drives I have on my computer is a (C:) and (G:) so I don't know why this (D:) Keeps coming up and affecting the installation?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.

I already changed the destination folder(SEVERAL TIME) but this keeps coming up, seriously whats the problem?

Ah i apologize for the lack of information, i was in a hurry so i forgot.
My system specs:
Sony VAIO, Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz 2.20 GHz, 4GB RAM , 64-Bit, NVIDIA GeForce GT 520M
I used to have an external HDD with all my work, files and softwares, which recently broke. It used to be recognized as D:/ so when I was trying to reinstall Photoshop that's where it was always sent to "Update" as I forgot it was registered as installed, after that I uninstalled the program and I thought that might fix it. So I tried re-installing, choosing a different location for the installation (Tried like 5 different folders.) and every time I get an error saying the same (Before I uninstalled Photoshop it said it was a critical error, now is a normal error.)
Also, the error pops up after it reaches 2%
http://i.imgur.com/gDSK4.png

ERROR: DW041: INSTALLDIR Volume K:\ doesn't exist.

What can i do?
It come's everytime when the install is at 2%..:(

Do you have some type of custom configuration? What operating system are you using? Finally which Adobe software are you trying to install?

CS6 installation failed - Volume E: does not exist

Having previously had CS6 on E: drive with the WinXP 32bit OS, I have recently upgraded to a SSD anbd it's now my C: drive. I then did a clean re-instal of everything. However CS6 fails to install with 8 warnings and an error - InstallDir Volume E: does not exist. I have no idea why and the xit code tells me nothing. Is there a way to get around this?
The full warning page looks like this:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW041 ... WARNING: DW022, DW024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 8 warning(s)
WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} NonAdobePayload Acrobat Professional 10.0.0.0 with version (2012-03-05 04:03:46.684000) already installed with incompatible version (2011-03-06 22:43:17.708000)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0
WARNING: DW065: Display requirements not met for {A4ED5E53-7AA0-11E1-BF04-B2D4D4A5360E} Adobe Dreamweaver CS6 12.0.0.0
WARNING: DW065: Display requirements not met for {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0
ERROR: DW041: INSTALLDIR Volume E:\ doesn't exist.

properly uinstall cs6.
run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer
install cs6 to its default location.

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Part of Photoshop isn't functioning. Under adjustments, when HDR toning is clicked on I get a code: Error 48: File or folder does not exist. Line:11 - $.evalFile(g_StackScriptFolderPath "StackSupport.jsx"); How can it be fixed?

The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

HDR Toning Error 48: File or Folder Does Not Exist

After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.

Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

Ruler Tool- Error 48: File or folder does not exist

I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?

i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Error(27,78): Reference PartnerLink1 does not exist as wire target

I am starter to BPEL.. when i am trying to invoke webservice(http://www.webservicex.net/convertMe...ight.asmx?WSDL) i am getting these errors
Error(27,78): Reference PartnerLink1 does not exist as wire target
Error(90): Element 'targets' not expected.
Edited by: 974508 on Dec 2, 2012 8:09 PM

maybe you first created the partnerlink in the bpel instead of the composite?
create the reference in the composite, see if you get the wire from the bpel to your convert-service and then go to the bpel process and use the invoke to call the partnerlink
if you did all this (recreating the service in the composite would maybe be the easy fix)

Build error :package com.sun.javadoc does not exist

Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.

sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Error DW041: installdir Volume H:/ does not exist

Similar Messages

Maybe you are looking for