Error dynamic File Name in Receiver File Adapter
Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
message1
SD01_E
FileName
row
message2
SD02_E
FileName
row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf
Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo
Similar Messages
-
Dynamic File Name for Receiver File Adapter
Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
ChemmanzHi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh -
Payload as File name at Receiver File Adapter
Hi All,
I have a requirement for a PROXY to File Scenario where Receiver files has to be named dynamically with a value from the Payload that I get. Also the particular field that has the file name should be unmapped with the Receiver.
For Example,
<row>
<Name>Alex</Name>
<DOB>27062014</DOB>
<City>Delhi</City>
</row>
If this is the Payload I get, I want the Receiver file name to be "27062014.txt". At the same time this particular field should not be mapped at the Receiver end.
I have tried a few links which confuse me further.Kindly help me,
Thanks in advance,
Sree RamHi Sree,
Please check if the case is correct. refer the below discussion
Problem in variable substitution
reference blog for variable substitution
Variable Substitution for Directory or File name.
regards,
Harish -
Setting dynamic file name in Receiver file adapter - not from payload
Guys I just remember reading a weblog but can't find it now that I need it, on how to set the file name in message mapping dynamically but not using any payload field.
Please let me know if you remember this.
Thanks a lot,
Viktor Vargaalso u can check in
<a href="/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a> -
Dynamic File name in Receiver File adapter
Hi,
My Scenario is Proxy to File.
I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
How can i create a dynamic filename? i searched the forum, but i could not get the correct answer,
Please help me out.
Regards
SrinivasHi Srinivas,
> My Scenario is Proxy to File.
> I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
public String targetFileName(String Sono, String Div, Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = sono + div + "<filename>"+".xml";
conf.put(key, MyFileName);
return MyFileName;
File name you can format according to your requirement.
And one more thing for this you have to specify the ASMA properties. For this check the below link step-1 and step-2.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards
Ramesh -
How to give a dynamic File Name for Receiver File/FTP Adapter.
Hi Experts,
I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
How to do this ?
for your info we are using ABAP Mapping.
Pl help me
Regards,
UmeshHi Umesh,
Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful -
Dynamic directory name in Receiving File adapter
Hi,
In File to File senario, In receiving system i want to create directory name dynamically. In my mapping there is a field called name, the directory name in the receiving system will be value in the name field. Any one can help me how to do this one...
Thanks
RaoHello,
Please follow the below to achieve the same.
input - Store number,
UDF
String dynaname = input;
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION );
DynamicConfigurationKey key = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/File","FileName");
conf.put(key,dynaname);
return "";
UDF mapping
Source[input] -
> UDF --> Rootnode of target structure.
Hope it helps.
best regards,
raj. -
How can i get message id as file name in Receiver Mail Adapter
Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
PurshothammHi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N -
Variable substitution not working for dynamic file name in Receiver File CC
Hi Experts,
I am doing the scenario of Proxy sender to File receiver and my purpose is to Create the text file
as per the filename available in Source Message payload.
I am using the Variable Substitution method for this as shown below.
Source Message Structure:-
<Row> -
having Cocurence 1.1
<Filename> -
having Cocurence 1.1
<Item> -
having Cocurence 1.Unbounded
<Field1>
<field2>
<Item>
<Item>
<Field1>
<field2>
<Item>
<Row>
Target structure is same as the source structure and i have mapped the Filename field of the Source
with the Target structure Filename.
In ID the following is the File receiver CC Configuration.
File Name Scheme:- %Dyn_filename%
In Advance tab, I have selected the Enable option and added one row as Variable name %Dyn_filename%
and Reference as payload:Row,1,Filename,1
In testing I am getting the Error as 'variable Dyn_filename is not found in Message payload'.
Please suggest me.
Regards,
JageshHi Pooja,
Hi Pooja,
Thanks for your valuable reply..
I tried with the same. but still Filename is appearing in Output file.Giving you some details regarding my Receiver File Configuration settings.
Target Message Type:-
<MT_Target_Struct>
<Row>----
1.1 occurence
<Filename_test>----
1.1 occurence
<ITEM>----
1.unbounded occurence
<Field1>
<Field2>
<ITEM>
<ITEM>
<Field1>
<Field2>
<ITEM>
<Row>
<MT_Target_Struct>
Recordset structure:- Row,Filename_test,ITEM
Row.fieldSeparator----
>'nl'
Filename_test.fieldFixedLengths----
>0 (Zero)
Filename_test.fixedLengthTooShortHandling----
>Cut
ITEM.fieldSeparator----
>,
ITEM.endSeparator----
>'nl'
I want only ITEM node to be written in the output file.
Please suggest.
Regards,
Jagesh -
Renaming attachment file name in receiver mail adapter
Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
ShobhitHi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name Type Module Key
localejbs/AF_Modules/MessageTransformBean rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail Local EnterpriseBean
Module Configuration
Module Key Parameter Name Parameter Value
rename Transform.ContentDescription File
rename Transform.ContentDescription attachement;filename="yourfilename.ext"
rename Transform.ContentType application/text;name="yourfilename.ext"
Thanks
Amitanshu -
Counter in file name in receiver file adapter
Hi,
I am using FTP, my requirement is to add counter in the file name i.e XYZ001.
And added to this i can increment the counter till XYZ020, after this i am supposed to start again from XYZ001.It will be some how handled that when i place XYZ001 for the second time , it will not overwrite the earlier one as it will be proccess by that time.
I could have used addcounter but it doesnt work for FTP:(...also have seen /people/shabarish.vijayakumar/blog/2009/10/05/pixi-maintaining-sequence-numbers-in-file-name-scheme
Do we have any new feature added in PI 7.1 for handling this.
Regards,
Abhithanks shabz..
Request you to please let me know how to proceed with the first option which you have mentioned i.e,how to create tables and will i be able to start the counter again from xyz001 once i reach xyz020? is there any abap code to be written (wiil be asking SAP counterpart ) or we need to do it in the dynamic configuration udf? Please let me know how to do the same.
1. Maintain a table in SAP. Use/Code a RFC call to look up the sequence number from this table, incrementing the value after it is read. The result is then used in a dynamic configuration code, and the file name can be generated at that point.
Will this impact performance ?..mine is a credit card authentication interface and response time is imp...
Regards,
Abhi -
Reg: File name in receiver FILE adapter
Hi Experts,
i have Scenario proxy to file
from source side i got input values in one field(long String). in the target side i need to split that field
finallly i need get the out put file like this
q2344eretrnnsd sewewerereefre wereretrtrtreeterte ertrterwytdyt rtretyeytyutueyt
sdgfghfhyghhjhj sdfgfdhdghgjgjh sdfgdfhgfhjgjgjfgh dfgdhdgghgh dfghfgfgfgfgfgf
sfdggggggggddf sdfdfsddfdfdfdfd sdfdfdfdfdfddfdfs sdfsdfdfdsfd asdfsdafdsfds
the problem is while place file in the target directory the file need save as according to the "version no" (it is included in the long string of source field)
file name should be change according to the "version no"
so please suggset to me how can i change the file name according to the version no which is include in the long string in the source side
Thanks in advanceHi Mani kandan,
thanks for the reply can you please tell me one more thing in FCC
source side we have only one field which is long string so we need put the value of that field in to the below format in target location
source (field value==<line>sapsdnforumsprocessintigration</line>) ocurs multiple times
in target file it has to appear as in below format.
sap sdnforums processintegration
sap sdnforums processintegration
sap sdnforums processintegration
sap sdnforums processintegration
please suggest wat type of file cotent conversion parameter rquired to achive this in the receiver communication channel
Thanks in advance
Edited by: katakoti on May 17, 2011 8:44 AM
Edited by: katakoti on May 17, 2011 9:28 AM -
Dynamic attachment name in receiver mail adapter
Hi all,
i am doing a receiver mail scenario (PI 7.1). my requirement is like this :
Receiver file need to be send in receiver mail attachment and attachment name should be dynamic
format for the attachment name should be like this
R+value from a particular field in payload +Timestamp
for example my file name should be like this R001_510815021009062532.xml
which is R+ 001_510815 + 021009062532 + .xml
can anybody suggest me how to go for this requirement? is ther any UDF or should i go for adapter module developement?
Thanks
sandeep sharma
Edited by: sandeep sharma on Oct 13, 2009 8:55 AMHi K Fatima,
I read your solution.I have a similar requiement but I need to send the entire output payload as an attachment,so I am using XSLT to send the payload as an attachment.
I am creating the file name through dynamic configuration in XSLT but the name of attachment is not as required but its any random generated name:
*code used:*
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output method="xml" version="1.0" encoding="UTF-8" />
<xsl:output indent="yes" />
<xsl:param name="inputparam"/>
<!-- mail parameters -->
<xsl:template match="*">
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<xsl:variable name="new-value" select="Shipment/InternalShipmentNum"/>
<Subject>Mail</Subject>
<From>xyz</From>
<To>abc</To>
<xsl:variable name="dynamic-conf"
select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key"
select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
<xsl:variable name="dynamic-value"
select="dyn:get($dynamic-conf, $dynamic-key)" />
<xsl:variable name="new-value"
select="concat($dynamic-value, 'subfolder\')" />
<xsl:variable name="dummy"
select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
<!--Content type -->
<Content_Type>application/xml</Content_Type>
<!Content Description>
<Content_Disposition>attachment;filename "<xsl:copy-of select="$new-value"/>"</Content_Disposition>
<!--Content Disposition -->
<Content_Description><xsl:copy-of select="$new-value"/></Content_Description>
<Content>
<xsl:copy-of select=".">
<xsl:apply-templates/>
</xsl:copy-of>
</Content>
</ns:Mail>
</xsl:template>
</xsl:stylesheet>
Please suggest ! I need the value in "Shipment/InternalShipmentNum" as name of attachment.
Thanks in advance!
Indu Khurana -
Dynamic attachment name with receiver mail adapter and use mail package
We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
I could probably do this using the adapter module (as per the following link),
http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?Hi,
1) XML payload as attachment (with dynamic name)
2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
<?xml version="1.0"; encoding="UTF-8"?>
<p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
<Subject>My Invoice</Subject>
<From>from email address<;/From>
<To>to email address</To>
<Content_Type>text/plain;name="MyFile.csv";</Content_Type> --> file name here
<Content>123;A49;aaa</Content> -> attachment xml here
</p2:Mail>
And you have to select MailPackage in the receiver mail adapter.
Regards,
Aravind -
Dynamic attachment name in receiver mail adapter for 1 attachment?
Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
DirkHi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk
Maybe you are looking for
-
Schedule measurement in SE30 - running a report in the background
Dear experts, I have a long running ABAP report and I will need to analyze its runtime for performance improvements. How may I correctly run this ABAP report in the background from SE30 (runtime analysis tool)? The report has to be run using a specif
-
Multiple link of the same document
1.I heard that when I buy a windows server, there comes also a free edition/foundation edition of sharepoint. Is it right? 2. When I upload a document to the free edition of sharepoint, is there any position for me also to enter the metadata of the d
-
Cleaning up duplicate contacts and calendar entries
I have a Treo 700wx, that I sync with Outlook, rarely with Active Sync - mostly with wireless sync (intellisync). My input methods vary, depending upon where I am. At home, I add/delete/modify calendar entries and contacts in Outlook on my laptop;
-
I seem to have corrupted the DBMS_SPACE package. How can I rebuild it? Thanks
-
So, every time I try to watch a youtube video, even sometimes when I'm just browsing a website, Safari will get hung up and give me the spinning wheel. I'm using Safari 7.1.4, and here is my EtreCheck report. Any help would be appreciated. Thanks! Pr