Error "E:/SAPAPO/RRP:003 0000036534"
Hi Gurus,
When i was doing txn MD12 ie change in the planned order for make-to order and i am trying to look for the component availability (shift+F7), it is giving me error as "E:/SAPAPO/RRP:003 0000036534"
What is this msg all about?
Hello addhya
Please check if the following notes are already implemented in your system:
1068815: /SAPAPO/RRP003 : Order xxxxxx does not exist
734455: /SAPAPO/RRP 003 error message after ATP check
913396: Bypass popup "Order does not exist" in SCM ATP check
951819: ATP check for maintenance order
Also, the following information you can find in the error longtext:
++++++++++++++++++++++++++++++++++++++++++++++++++++
NA /SAPAPO/RRP003
Short Text
Order &1 does not exist
Diagnosis
There are inconsistencies
In SAP APO between the database and liveCache or
Between SAP APO and the OLTP system
System Response
The system cannot read the order from the database.
Procedure
This message can occur, for example, if you perform an availability check for a manufacturing order in SAP R/3 and the manufacturing order is not yet in SAP APO. In this case, repeat the check at a later time.
Remove the inconsistencies. Use the following transactions:
If there are inconsistencies in SAP APO, use the consistency check
Call Consistency Check Immediately.
If there are inconsistencies between SAP APO and SAP R/3, use the Compare/Reconcile Function
Call Compare/Reconcile Function Immediately
++++++++++++++++++++++++++++++++++++++++++++++++++++
I hope it helps
Best regards
Gabriel
Similar Messages
-
Error as S: /SAPAPO/RRP: 003 0010005690 while release Collective prdn order
Hi Experts,
When I try to release the collective production order in R/3 with CO05N transaction am getting error as mentioned below,
S: /SAPAPO/RRP: 003 000010005690
Message no. /SAPAPO/RRP003
Please guide me the steps what action I should take in APO part and what has gone wrong.
Request you to give me the earliest reply.
My collective production order is as below,
10005690 for child material and 10005691 for header material.
Cheers,
Kumar.SHi Kumar,
T-code- /N/SAPAPO/OM17 has to run when there is less or no load in the system.
Once you enter in to the OM17 screen lock the queues inbound and outbound. If posible lock the users.
Then select consistency check. there you will find multiple options to run consistency. Select them and execute in the background. It will take 3 to 4 hours based on your system data. Once it is completed then go to the same screen and select evaluate last background jod button. You will get all the inconsistencies there then select correct the inconsistencies.
After this then run /N/SAPAPO/CCR. Give the logical system of R/3 and the plants.
Select the planned orders and Manufacturing orders and execute.
You will get all the inconsistencies overe there. For there correct the inconsistencies.
Hope this will help you.
Regards,
Kishore Reddy. -
Error while creating Order - ERROR S:\SAPAPO\RRP3
Hello all.
We have a planning version called "Planej". The goal of this
version is for forecasting simulation .
A few days ago, starts showing this error:
"S:/SAPAPO/RRP:718 40401681 WAS0
Error occurred while creating order"
I thinking in inconsistency in this version.
I tried /SAPAPO/DELETE_PP_ORDER but don't delete the forecasts.
Someone know another function?
Best RegardsHi
Try /SAPAPO/RLCDEL -
TIME_OUT error with /sapapo/rtsinput_cube
We are in the process of cutting over to a new
planning area ZPA2 with data from a backup InfoCube
(ZIC21), and the /sapapo/rtsinput_cube program
is failing with a TIME_OUT error.
The overall job finishes with a success message,
although data is only partially loaded in to the
planning area. When you look at the spool, the first
steps are green, then the job times out for the
subsequent steps.
We ran this first with 3 key figures being loaded
from cube to planning area for approx 1/5 of 464000
CVCs for 5 years in monthly buckets only.
This errored with SAPSQL_INVALID_FIELDNAME message as
well as the TIME_OUT error message, and data was
loaded partially in the ZPA2 planning area (only 2
months).
We then reduced the time horizon from 5 years of
months to be only 1 year in months.
This errored with the TIME_OUT error message. Again,
data was partially loaded in to the planning area
(about 7 of the 12 months was loaded).
The prime issue is with the constant time out.
Has anyone any idea how to solve this problem ?not sure what version you are using but if you are on the latesr versions, its a good idea to use parallel processing - you can find it on the additonal settings tab
you can also set it to copy only the specified period (previously it copied the whole bucket in the planning area to cover the time period)
if you are in versions that dont support this - then you can create parallel jobs that get triggered by an event or use a process chain and run this in parallel. As long as you dont overlap the periods it should be fine
you should also ask your basis team to check the time out set up for the application and get it extended (you can see this in rz11 i think and choosing the correct parameter - would leave it to the basis folks to help in this) Alternately check your processing power and see if you can get it increased -
CIF Error in /sapapo/ccr
Dear All
Receiving the following error while publishing the purchase requisition created after PPDS run to ECC .
The error is as follows :
SAP APO advice code () differs from SAP R/3 advice code (##)
Message no. /SAPAPO/CIF194
Could you please support .
Thanks and Regards ,
Rajan SagooHI Rajan
Did'n t understood correctly , But check The foloowing
1) Is the Purchase requisition is generated in APO after planning run if not then check Check whether Distribution definition has been maintained in APO for publication type external procurement
2) If it is generated then you have problem in getting transferred to ECC system, if so pls check whetjer you have active integration model for the Purchase requisition of that matl
Pls revert back
regards
Vijay -
I am trying to install ES2 on an XP machine. My system details are
1>XP operating system
2> Weblogic 10.3
3>My sql database
While installing i get the above mentioned error. I am attaching the complete log. I have given all the preivileges to the database user. Can .The error message says 'message:getProvider failure: factory not initialized>' . Does it have anything to do with the configuration. Please help!
####<Jul 11, 2011 7:44:01 PM IST> <Info> <com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Bootstrapping using [java:comp/env/ejb/UserManagerInitializer]>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Initializing DB ....>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <================================== Bootstrapping User Manager component ==================================>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Creating/Updating the database>
####<Jul 11, 2011 7:44:01 PM IST> <Warning> <com.adobe.idp.common.errors.exception.IDPLoggedException> <B002324056E32> <ManagedServer_1> <Thread-47> <<anonymous>> <> <> <1310393641158> <BEA-000000> <UserM:GENERIC_WARNING: [Thread Hashcode: -1701320760] com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Error occured while creating database.
com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized
at com.adobe.idp.storeprovider.jdbc.DBStoreFactory.getProvider(DBStoreFactory.java:827)
at com.adobe.idp.storeprovider.database.DBProviderCache.initialize(DBProviderCache.java:178)
at com.adobe.idp.storeprovider.database.DBProviderCache.createDatabaseSchema(DBProviderCache .java:144)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.createDatabase(Bootst rapperManagerBean.java:290)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.createD atabase(BootstrapperManagerBean_58tjk0_EOImpl.java:432)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:77)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Some error occured while initializing database. Refer to logs provided before for more details.>
####<Jul 11, 2011 7:44:01 PM IST> <Warning> <com.adobe.idp.common.errors.exception.IDPLoggedException> <B002324056E32> <ManagedServer_1> <Thread-47> <<anonymous>> <> <> <1310393641158> <BEA-000000> <UserM:GENERIC_WARNING: [Thread Hashcode: -1701320760] com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <EJB> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-00180E0BA6A4F8DE20CA> <> <1310393641158> <BEA-010227> <EJB Exception occurred during invocation from home or business: [email protected] threw exception: com.adobe.idp.common.errors.exception.IDPSystemExceptionorigin: com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Loading default configuration as the preference tree does not exist in the database.>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.config.AdobePreferenceFactory> <B002324056E32> <ManagedServer_1> <Thread-47> <<anonymous>> <> <> <1310393641158> <BEA-000000> <UserM:GENERIC_ERROR: [Thread Hashcode: -1701320760] Problem with system rootcom.adobe.idp.common.errors.exception.IDPSystemExceptionorigin: com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Warning> <com.adobe.idp.common.errors.exception.IDPLoggedException> <B002324056E32> <ManagedServer_1> <Thread-47> <<anonymous>> <> <> <1310393641158> <BEA-000000> <UserM:GENERIC_WARNING: [Thread Hashcode: -1701320760] com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <EJB> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-001A0E0BA6A4F8DE20CA> <> <1310393641158> <BEA-010227> <EJB Exception occurred during invocation from home or business: [email protected] threw exception: com.adobe.idp.common.errors.exception.IDPSystemExceptionorigin: com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Info> <EJB> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-00190E0BA6A4F8DE20CA> <> <1310393641158> <BEA-010227> <EJB Exception occurred during invocation from home or business: [email protected] threw exception: java.lang.RuntimeException: nullgetProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.config.AdobePreferenceFactory> <B002324056E32> <ManagedServer_1> <Thread-47> <<anonymous>> <> <> <1310393641158> <BEA-000000> <UserM:GENERIC_ERROR: [Thread Hashcode: -1701320760] Problem with system rootcom.adobe.idp.common.errors.exception.IDPSystemExceptionorigin: com.adobe.idp.common.errors.exception.IDPLoggedException| [com.adobe.idp.storeprovider.jdbc.DBStoreFactory] errorCode:12290 errorCodeHEX:0x3002 message:getProvider failure: factory not initialized>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:15 1)
at weblogic.ejb.container.internal.BaseLocalObject.handleSystemException(BaseLocalObject.jav a:860)
at weblogic.ejb.container.internal.BaseLocalObject.handleSystemException(BaseLocalObject.jav a:791)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:486)
at weblogic.ejb.container.internal.BaseLocalObject.postInvokeTxRetry(BaseLocalObject.java:42 4)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:245)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <***** Bootstrap FAILED to complete *****>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <Bootstrap cannot recover from error.
com.adobe.idp.common.errors.exception.IDPException| [com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean] errorCode:8193 errorCodeHEX:0x2001 message:Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:280)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Jul 11, 2011 7:44:01 PM IST> <Error> <com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper> <B002324056E32> <ManagedServer_1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1310393641158> <BEA-000000> <ALC-TTN-011-003: Bootstrapping failed for platform component [UserManager]. The wrapped exception's message reads:
Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-011-003: Bootstrapping failed for platform component [UserManager]. The wrapped exception's message reads:
Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 107)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: com.adobe.idp.common.errors.exception.IDPException| [com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean] errorCode:8193 errorCodeHEX:0x2001 message:Failed to load default configuration. error:javax.ejb.EJBException: EJB Exception: : java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.config.AdobePreferenceFactory.systemRoot(AdobePreferenceFactory.java:178)
at com.adobe.idp.config.PreferencesBean.importConfigNodeFromXML(PreferencesBean.java:339)
at com.adobe.idp.config.PreferencesBean_7ioni8_ELOImpl.importConfigNodeFromXML(PreferencesBe an_7ioni8_ELOImpl.java:230)
at com.adobe.idp.um.config.util.UMConfigManager.importConfigFromXML(UMConfigManager.java:176 1)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:266)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
; nested exception is: java.lang.RuntimeException: nullgetProvider failure: factory not initialized
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean.loadDefaultConfigurat ion(BootstrapperManagerBean.java:280)
at com.adobe.idp.um.businesslogic.bootstrapper.BootstrapperManagerBean_58tjk0_EOImpl.loadDef aultConfiguration(BootstrapperManagerBean_58tjk0_EOImpl.java:67)
at com.adobe.idp.um.businesslogic.bootstrapper.UMBootstrapperClient.performBootstrapping(UMB ootstrapperClient.java:91)
at com.adobe.livecycle.bootstrap.bootstrappers.UMBootstrapper.bootstrap(UMBootstrapper.java: 103)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3594)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>I have the same problem... on the same configuration.
-
CIF Error - FM /SAPAPO/CIF_PROD_INBOUND not found
Hi Experts,
I am configuring CIF on a fresh ECC & APO system, I have made the required configurations, but when i am trying to CIF the Location-Product, it failed
The blocked queue gave the termination message with :-
Function Module / SAPAPO/CIF_PROD_INBOUND not found &
Function Module / SAPAPO/CIF_GEN_EVENT not found
When I checked the result on the APO side, to my surprise, I am able to see the Locations getting created but no product.
Please suggest.
Regards
ManuManu,
You can suppose anything you wish. Better, though, to actually find out. The userid I am talking about is the userid found in your ERP-to-SCM RFC connection, which is determined by YOUR company. I cannot say if the userid is RFCUSER since I have no access to your system.
So, in ERP, SM59 > select ABAP connections > select the RFC connection used to connect to your SCM system. Under the Logon & Security tab will be the name of the Userid that core interface will be using to 'talk' to SCM. Write down this userid.
Now log onto SCM, and do SU01 on that userid. Review his authorizations. It is OK to assign SAP_ALL to this userid for development purposes as a temporary measure. Probably a good idea to make him 'dialogue' as well until all of your interface debugging is done.
In order to determine errors with interface, refer to the logs in SCM. In SCM, SLG1 > Object CIF, everything else all asterisks, select a suitable date range. If you see no logs, you probably need to turn on logging /SAPAPO/C4
I strongly recommend that you thoroughly read the 2 documents I posted earlier. If this is your first try at connecting an ERP to an SCM system, the time will be well spent.
Best Regards,
DB49 -
No unit found for selected resource ( error message /SAPAPO/SDP318 )
Hello
I am loading resource using standard SNP Planning book. When I try to load the resource, I am getting this error message "No unit found for selected resource". Can someone tell me where in the resource I set the UOM that corresponds to Planning book UOM.
Thanks for the hlep.
NajamHi,
Please check the type of the resource. This should be a single Mixed or Multi Mixed resource to maintain the SNP capacity.
And also run cons check / live cache check
Thanks,
Venkat -
Dear Experts,
In our scenario we are using standard method of GATP with CDP along with CTP.
First time run of GATP gives Planned Orders against my sales order requirement then i have deleted the Planned Orders and again trigerred the GATP which is giving following error code -
/sapapo/rrp322.
Please advise ...
thanks
Sumit KalyanHello Sumit,
I did some search trying to help you.
Here what I found:
The error message /SAPAPO/RRP 322 was introduced into the system from
release 3.1, by note 512907, to recognize the recursion when Extended Order Generation
(EOG) is used in APO. Here a maximum number of recursive runs for a
product was restricted to 3.
Also, on note 660857 it gets some explanation.
I hope it helps.
Thanks and regards,
Michel Bohn -
Error : Posting period 003 2008 is not open
Hi Team,
When I m doing recording through transaction FBS1 it is giving me
error message "Posting period 003 2008 is not open". Can anyone tell me how to avoid this.
Thank u in advance.Hi,
use transaction OB52 to open the needed period.
Regards Vassko! -
Error while activating POS - Message /SAPAPO/TSM154
Hi,
We have installed SCM 2007 in our landscape recently. We are facing problem in Activating the standard POS objects like 9ADPBAS, 9ASNPBAS etc., we get error as " Planning Object Structure is invalid".
We tried to create a new MPOS in the system, but can not activate the same. We get error message /SAPAPO/TSM154. In Service Marketplace we have a note 1152453 for this kind of error, but while implementing we again get error stating "Cannot be implemented". Diagonsis states " SAP Note does not contain valid correction instructions".
Have anyone faced similar problems? Please help us out.
Thanks,
Rajesh ManoharanHi,
Thanks for the reply.
I tried to use the report "/SAPAPO/TS_PSTRU_GEN" to check, but it gives Generation Error when I run it. No diagonsis attached to that error.
When I tried to use the transaction and check for inconsistency, it says the POS is not active.
Please give me more pointers to check.
Regards,
Rajesh Manoharan -
Error while running background deployment, program /SAPAPO/RMSDPDEP
Hi all,
For the second time in 3 months, I encounter this strange error while running a daily background deployment job, using program /SAPAPO/RMSDPDEP.
The job starts correctly and does a part of its job, but then interrupt with this message in the job log :
--> "no valid simulation guid" (class SAPAPO/OM_TS, n° 101)
--> "Unknown error" (class SAPAPO/OM, n° 100)
--> "Job cancelled after system exception ERROR_MESSAGE" (class 00, n° 564)
I just can't find any clue about what causes the problem...
Did anyone encounter that kind of difficulties before ? Any help would be usefull...
Thanks !
FabriceHi Siva,
In this range of time, I effectively run 13 parallel deployment jobs, as follow :
n° 1, 2, 3, 4 and 5 : same location (factory 1) and each treats a products selection
n° 6, 7, 8, 9 and 10 : same location (factory 2) and each treats a products selection
n° 11 : all products of factory 3
n° 12 : all products of factory 4
n° 13 : all products of factory 5
A product can only be produced in a single location, so there might not have access concurencies during parallel jobs. Do you think it could be some kind of a technical problem (not enough process available ?). Note that the problem can't come from CPU, we use CPU auto-allocation, and it works well.
What do you think ?
Thanks
Fabrice -
hello,
following with my tread [ICR: Define Reconciliation Process Detail Attributes|Intercompany reconciliation - help with customizing] I have already make trx FBICS3 - Select Documents store 2 documents at table FBICRC003T, looks good. But unfortunately when I run trx FBICA3 - Assign Documents Automatically or FBICR3 - Reconcile Documents Manually the system shows the following error message:
Reconciliation Process 003: Error in setup of reconciliation display
Message no. FB_ICRC110
Diagnosis
Your customizing for the reconciliation display is invalid.
when I go to customizing "Set Up Reconciliation Display" the system shows a "Run time error"
Runtime Errors SYNTAX_ERROR
Date and Time 19.09.2008 20:20:30
Short text
Syntax error in program "SAPLFB_RC_UI_VIEWS ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLFB_RC_UI_VIEWS " in include
"LFB_RC_UI_VIEWSF00 " in
line 1308:
"The data object "V_FBRC0070C" does not have a component called "AUTO"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLFB_RC_UI_VIEWS :
"The data object "V_FBRC0070C" does not have a component called "AUTO"."
Trigger Location of Runtime Error
Program SAPLSVIM
Include LSVIMU04
Row 92
Module type (FUNCTION)
Module Name VIEW_MAINTENANCE_LOW_LEVEL
Does any body knows what is happening? Should I implement a SAP Note?
Thanks in advanceHello Rafael,
Apparently you did not generate the customizing using FBICC. If you have not invested much effort in customizing settings I suggest that you implement note 1172591 and generate the customizing via transaction FBICC. After you run this and make sure that the transaction data tables are activated the programs should run (provided the customizing for the companies in FBIC032 is correct). Please go through the generated customizing settings and make sure that everything looks OK...
I also recommend implenting note 1161993. Whether you run FBICC or not it will help when going through the customizing settings. The most likely cause for the error messages is that there are some incorrect settings in your field catalog and due to this also in the display hierarchy setup.
I hope this helps you in your efforts,
Ralph -
BDC batch interface error /SAPAPO/SCC05
I have created an ABAP program that does a CALL TRANSACTION to transaction /SAPAPO/SCC05 (in an APO program). If I run the program in foreground (the CALL TRANSACTION in background mode), everything works correctly. However, when I try to run the program as a batch job, I receive an error message: "Error calling up user interface components".
I tried changing the CALL TRANSACTION to simply create a BDC session I could run via SM35. The BDC, when run in background mode, gives the same error, but runs fine in foreground.
I located an OSS Note (below) that references the error message (/SAPAPO/SCC 032) (<--message class/message number). I tried changing the settings outlined in the alternative solution in the OSS note, but the problem is still there.
In addition, I have tried to toggle all the different parameters that one has control over in the CALL TRANSACTION (default screen-size, commit work, etc.) No differences that I could find.
Has anyone run into a similar issue? I can be reached at [email protected]. Thank you.
Here is the OSS Note:
SAP Note No. 396020 15.12.2005 Page 1
Number 396020
Version 2 from 17.04.2001
Status Released for Customer
Set on 16.04.2001
Language EN
Master language DE
Short text Error when calling PPM maintenance, SCE or SCC
Responsible SAP AG
Component SCM-APO-OCX
ActiveX controls
Long text
Symptom
When you call the graphical PPM maintenance or SCC/SCE, the system
displays error message "Error calling up user interface components"
/SAPAPO/SCC032
Additional key words
APO-SCC
Cause and prerequisites
You installed a valid APO Frontend patch correctly. When you use
PPM/SCE/SCC now a very rare constellation can occur, a graphical user
setting may be outside of the allowed value area. Thus, when you call
the respective application for the specific user the system displays an
error message of the frontend.
Solution
Workaround:
If possible, create a new user ID for the respective user.
Alternatively:
In database table /SAPAPO/CP_USRPRfor the respective user and for the
respective application (field APPLID) set fields 'MAP CO ********' to
initial (value 0). Note that for changes directly in database tables you
have to be very careful
A solution is being developed. We will update this note as soon as
possibly.
Source code corrections
Page 2
Valid releases
Software Component Release
from to
SAP_APPL SAP Application
46C - 46C
SAP_APO SAP Advanced Planner & Optimizer
30A - 30A
Further components
SCM-APO-MD-PPM
Production Process ModelHey Mike. If it is using any enjoy controls, it is really not a good idea to do a BDC over the transaction. You should find another way to do the transaction, maybe there is a BAPI available or a function module. Or, is there a transaction that does the same with out the controls. In R/3 v46c, there are transaction like ME21(Creat Po) that is the old version, but works the same way as the ME21N which is the enjoy transaction.
My advise is to find another way to do the transaction besides using the tcode that you are currently using. I know that this is not much help. Sorry
Please remember to award points for helpful answers and mark your post as solved when solved completely. Thanks in advance
Regards,
Rich Heilman -
/SAPAPO/OM_REORG_DAILY error
Hi folks,
I have an issue with transaction LCA03 in SCM 5.0. It shows a red light at "Critical logging event" --> ReorgDaily. When I check the log, I can see that the background job /SAPAPO/OM_REORG_DAILY is terminating every night with the following error message:
"No planning version active in current client" and then "Job cancelled after system exception ERROR_MESSAGE."
We work in client 100. In client 100, I checked transaction /SAPAPO/MVM and there is planning version 000 active.
When I check SM36 --> standard jobs, there are several background jobs (standard jobs) scheduled and running, but all seem to run in Client 000. One of these is /SAPAPO/OM_REORG_DAILY.
How can I get this fixed? Do I have to delete the standard job /SAPAPO/OM_REORG_DAILY and create it again, in client 100? What about the other jobs, that are running fine in Client 000 (/SAPAPO/OM_DELETE_OLD_SIMSESS, SLCA_LCK_SYNCHOWNERS)? Do they make sense there? Or does it not matter, in which client these jobs run?
Sorry, but the client concept is new to me and I couldn't find info on this with regard to these jobs.
Thank you for helping, MatthiasHi, thanks for your answers!
I first checked the job log in transaction SM36 for /SAPAPO/OM_REORG_DAILY. From there comes the error message I provided.
/SAPAPO/OM11 shows all occurences for /SAPAPO/OM_REORG_DAILY, they all failed and only ran in client 000. Also, DelOldRegs (/SAPAPO/OM_DELETE_OLD_SIMSESS) are shown with a yellow light, all are shown for client 000 only.
I now ran the job /SAPAPO/OM_REORG_DAILY manually on client 100 from transaction SE38.
It first shows an information window which says: /sapapo/om_reorg_daily Scheduled Daily: 100 --> See /sapapo/om13.
Then a new Informtion windows with: Analysis of LC and LCA objects shows errors.
If I go again to transaction LCA03, there are only two red traffic lights:
-/sapapo/om_reorg_daily 100 (I think I just have to schedule the job for client 100 here daily, since now it is only scheduled in client 000)
-Critical logging event: This shows the error, that /SAPAPO/OM_REORG_DAILY failed in the last nights (when it was running in client 000. It failed with the error message given earlier.)
What to do? Just schedule the job for client 100 and delelte the standard job for client 000? Because I cannot schedule two standard jobs with the same program to be executed.
Thanks again, Matthias
Message was edited by:
Matthias Sartor
Maybe you are looking for
-
SSO to R/3 using a reference system
Hi, I try to setup SSO between a EP6 SP2 and a R/3 4.7. I configured the backendsystem correctly because SSO works if the users have the same user id (tried it using WinGUI). In my case the user ids between ActiveDirectory and SAP differ, so I have t
-
Updated IDT Audio Driver now sound and microphone are not working Hp Elitebook 8540w
Hi, I updated my IDT audio drivers using the HP Support Assistant now I cannot get sound or microphone working on my laptop. the windows volume control shows "No Audio Device is Instialled" although I can see IDT High Definition Audio Codec is instal
-
Enabling materialized view for fast refresh method
In AWM when i select refresh method as FAST and enable the materialized view, am getting the below error: "Refresh method fast requires materialized view logs and a previously run complete refresh of the cube mv". i need this Fast refresh of a cube m
-
Search bar doesnt launch a search when I press Enter key
When I type something in the search bar, it shows me suggestions. On pressing Enter, it selects the highlighted suggestions. Now that I press Enter again to launch the search query, nothing happens. Search query doesnt go to the network till I mouse-
-
Is there any app to quit from application with out pressing home button every time
is there any app to quit from application with out pressing home button every time?