Error E02 Printer Canon MG 2170

morning,i have some trouble at my printer canon mg2170 error code is E02, i have change black catridge but it still says E02 how do i fix this error please help thank you, have a nice day

I am having a similar problem with the cnijfilter-mp280. This is my build log: https://gist.github.com/3325907

Similar Messages

HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

Im trying to configure my printer 'Canon PIXMA MX3170' - however, I get Error during installation

Im trying to configure my printer 'Canon PIXMA MX3170' -
I followed the following steps mentioned on some site:
"Follow below steps to setup Canon MG3100 printer to wifi using WPS function (by a button push on the wireless router/access point)
Press and hold maintenance button on printer. (button with screw driver and cutting pair symbol)
Now the LED should flash as '_'
Press and hold 'Fit to Page" button, now LED should flash as single dash moving vertically.
Once the LED flash is confirmed, press and hold WPS button on router/access point for about five seconds.
Printer should stop the flashing and LED should be back to normal displaying '1'.
This completes the setup and you are ready to use your printer wireless ".
However,
1.LED on my printer flashes 1-2-3-E instead of a steady 1.
2. Error message during installation : "An error occurred while communicating with the printer"
3. Im using a netgear router - and I don't know what is an access point and how to configure it for the printer.
4. I think I pressed the right button - (WPS button) - button with symbol having a tower emitting waves.
My installation as a result - failed. Need your help.
Thanks,
Aditya

Hi Aditya!
Welcome to The Canon Forums, and thank you for your inquiry! We appreciate your participation, however we need to let you know that your product seems to be a model that is not supported by our team here at Canon USA. The Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs. Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.

"Error while Printing" on ethernet network connected iMac.

Have 2 iMacs sharing a Canon MP530, one directly connected, the other via a Linksys ethernet router. Upon a print request, the networked computer locates the MP530 and displays the standard print page, but shortly after clicking Print (or Preview) the "Error while Printing" message is displayed. Under some conditions in the past we have been able to print from the networked machine, but now we're stuck and nothing seems to fix the problem.

Since you have 10.4.10 installed, I'm betting that you were able to print before this update was installed. Anyway, the first thing I would do is delete the printer from the 'client' (the iMac connecting to the shared printer). Open Printer Setup Utility, select the MP530 and delete it. Then click on Printer Setup Utility and select Reset Printing System. This should remove the Canon MP driver files. Then run the printer driver installer again and once completed, add the printer via the Printer Setup Utility, by clicking Add > Default Browser and select the Shared Printer.
I would also try running a Repair Disk Permissions and if that doesn't help then try using Fixamac's Printer Setup Repair utility.

"Error while printing" in non-Admin user

I have a non-admin account (for my wife) in my iMac G5, and from some days ago, all applications refuse to print. A msg telling "Error while printing" appears, and the application trying to print crash in some sort of way.
I can print the test page from the Printer Utility, so the printer (a Canon MP130) is fine.
Entering with my Admin account, i have no problem printing.
I check some help in Apple support, and as there is stated, i repaired permissions on both accounts.
And the problem doesn't solve. Still, ALL applications gives this message.
I'm not very tech in this, but i just note that the msg appears while the doc info is "going" to the printer, after i accept "Print" (spooling??)
Does anyone knows what i can do to correct this?

I never solved this...and still having troubles to print from the other user

How do I fix error 5100 on Canon Pixima MX532?

I'm using a new Toshiba Laptop with OS Windows 8.1
I got a message saying there was a paper jam but there is not a paper jam as far as I can tell. I tried turning power off - pushing all kinds of buttons but all I get when the power comes back on is the printer cariage runs once back and forth and then two short beeps and then the orange error triangle and the power button blinks.
Anyone here to help?
Thanks,,
Gary in West Kelowna BC Canada

Hi Gary1,
Error 5100 is a carriage error. Here are some solutions to solve this error:
http://fix-your-printer.blogspot.fr/2009/03/error-5100-on-canon-printers.html

Problem printing MAC-PC for a multifunction printer Canon i-SENSYS MF4018

In my office, installed a network of Macbook 466 (Mac OS X 10.6.2) and PC (WinXP SP3). We bought a new multifunction printer Canon i-SENSYS MF4018(MF4010). By PC connected multifunctional printer MF4018 (model has only a USB port).
On the PC works well. My MAC is the printer on the network, but at the beginning of printing an error: Canon UFR II Printer Driver An error occurred.: -50. Driver downloaded on the official web-site Canon - CANONUFRIIV2.00 EN.dmg.
Please, help set up a complete operation of the printer in my office from the MAC.
How to make it possible to print from MAC without any errors?

Pahu and Eliask,
I just purchased a canon isense mf4018 for our office. We have a mac mini os x 1.5.8 and a pc windows xp sp3. we are experiencing a printing problem from the mini. we aren't using a network. we just swap the usb cable between computers when printing is needed. The error that occurs is 'load correct paper MP tray: ltr; cancel: sys. monitor.' This looks like it only happens when we print from Word for Mac when printing more than one copy of the document. Excel printed multiple copies fine. If i go to sys monitor and print status, I find the word doc option to cancel or continue print. I choose yes to cancel and it prints another copy of the doc. the error still exists. I go through that routine until all copies have been printed. Scanning doesn't work. I downloaded this driver http://software.canon-europe.com/software/0036890.asp?model=
Thanks for the help
Neal

Cups 2.0.0-2 error_log: pstocapt3 write error,32 on Canon LBP6000B

Hello!
My goal is to configure printer Canon LBP6000B.
I've followed https://wiki.archlinux.org/index.php/Canon_CAPT and done the following steps:
installed required dependencies
HIDDEN_HOSTNAME% pacman -Qs '(cups|capt-src|ghostscript|gsfonts|lib32-cups|libcups|lib32-libxml|lib32-popt)'
local/capt-src 2.60-2
Canon CAPT Printer Driver for Linux. Compiled from source code.
local/cups 2.0.0-2
The CUPS Printing System - daemon package
local/cups-filters 1.0.61-2
OpenPrinting CUPS Filters
local/cups-pk-helper 0.2.5-1
A helper that makes system-config-printer use PolicyKit
local/ghostscript 9.15-1
An interpreter for the PostScript language
local/gsfonts 20130917-1
URW and Postscript core35 fonts
local/lib32-libcups 1.7.5-1
The CUPS Printing System - client libraries (32-bit)
local/lib32-libxml2 2.9.1-1
XML parsing library, version 2 (32-bit)
local/lib32-popt 1.16-6
A commandline option parser (32 bit)
local/libcups 2.0.0-2
The CUPS Printing System - client libraries and headers
local/python-pycups 1.9.68-1
Python 3 CUPS Bindings
local/system-config-printer 1.5.3-3
A CUPS printer configuration tool and status applet
configured printer via lpadmin, ccpdadmin:
HIDDEN_HOSTNAME% cat /etc/cups/printers.conf
# Printer configuration file for CUPS v2.0.0
# Written by cupsd on 2014-11-09 14:02
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer LBP6000-LBP6018-2>
UUID urn:uuid:1e72114d-e2ac-3cea-5134-f78008b25775
Info Canon LBP6000/LBP6018
Location HIDDEN_HOSTNAME
DeviceURI usb://Canon/LBP6000/LBP6018?serial=0000B4B57ESG
State Idle
StateTime 1415530936
Type 8393860
Accepting No
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<DefaultPrinter LBP6000B>
UUID urn:uuid:1810d3d0-b717-3785-687c-f36cf53c1c6b
Info LBP6000B
DeviceURI ccp://localhost:59687
State Idle
StateTime 1415530931
Type 8393860
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</DefaultPrinter>
HIDDEN_HOSTNAME% cat /etc/ccpd.conf
# Canon Printer Daemon for CUPS Configuration Data
<Path>
# CUPS configuration file path.
# Default /etc/cups/
CUPS_ConfigPath /etc/cups/
# Log directory path.
LogDirectoryPath /var/log/CCPD/
</Path>
# Printer entries.
# Mapping each "Printer Name" to each "Printer Device Port".
# The "Printer Name" has to be identical to the CUPS printer queue name.
# For example, if you prepare a printer named "LBP3200" as a CUPS printer
# queue name, and the printer is connected to the USB port "/dev/usb/lp0",
# you can use the following three lines example just by removing the
# comment symbol "#" of each line.
#<Printer LBP3200>
#DevicePath /dev/usb/lp0
#</Printer>
<Printer LBP6000B>
DevicePath /dev/usb/lp0
</Printer>
<Ports>
# Status monitoring socket port.
# Default 59787
UI_Port 59787
PDATA_Port 59687
</Ports>
Captstatusui connects to printer easily and execute cleaning.
But when I'm trying to print at least test page via system-config-printer cause:
D [09/Nov/2014:14:47:38 +0300] [Job 32] Set job-printer-state-message to "pstocapt3 write error,32.", current level=ERROR
D [09/Nov/2014:14:47:38 +0300] [Job 32] PID 30402 (/usr/lib/cups/filter/pstocapt3) stopped with status 1.
Here is full /var/log/cups/error_log: http://pastebin.com/G6JwEM0g
Google tells, that it's broken pipe error code. I'd like to find out which pipe, but wasn't trying to debug.
Here is some links I surfed:
http://forums.gentoo.org/viewtopic-t-91 … art-0.html
http://ubuntuforums.org/showthread.php?t=1983091
https://help.ubuntu.com/community/CanonCaptDrv190
https://wiki.archlinux.org/index.php/Canon_LBP2900
but didn't found something new.
What is my example missing?
UPD:
There are some similar problems on other sites:
https://www.centos.org/forums/viewtopic.php?t=31731,
where according to the logs, user should add following symlinks:
ln -s /usr/lib/cups/filter/pstocapt /usr/lib64/cups/filter/pstocapt
ln -s /usr/lib/cups/filter/pstocapt2 /usr/lib64/cups/filter/pstocapt2
ln -s /usr/lib/cups/filter/pstocapt3 /usr/lib64/cups/filter/pstocapt3
ln -s /usr/lib/cups/backend/ccp /usr/lib64/cups/backend/ccp
but on the arch, lib64 by default points to lib, so all this links are done automatically:
HIDDEN_HOSTNAME [ls] /usr
HIDDEN_HOSTNAME% ls -all
total 392
drwxr-xr-x 9 root root 4096 Nov 2 01:24 .
drwxr-xr-x 17 root root 4096 Nov 1 22:48 ..
drwxr-xr-x 5 root root 131072 Nov 9 15:56 bin
drwxr-xr-x 433 root root 45056 Nov 9 15:56 include
drwxr-xr-x 237 root root 143360 Nov 9 15:56 lib
drwxr-xr-x 27 root root 36864 Nov 9 15:56 lib32
lrwxrwxrwx 1 root root 3 Oct 25 21:41 lib64 -> lib
drwxr-xr-x 11 root root 4096 Jun 12 02:11 local
lrwxrwxrwx 1 root root 3 Oct 25 21:41 sbin -> bin
drwxr-xr-x 245 root root 12288 Nov 9 15:56 share
drwxr-xr-x 3 root root 4096 Oct 12 18:32 src
HIDDEN_HOSTNAME [ls -all] /usr HIDDEN_HOSTNAME [ls -all] /usr 14-11-09 7:14PM
HIDDEN_HOSTNAME% ls -all /usr/lib/cups/filter/pstocapt*
-rwxr-xr-x 1 root root 21394 Nov 9 12:14 /usr/lib/cups/filter/pstocapt
-rwxr-xr-x 1 root root 25595 Nov 9 12:14 /usr/lib/cups/filter/pstocapt2
-rwxr-xr-x 1 root root 31135 Nov 9 12:14 /usr/lib/cups/filter/pstocapt3
HIDDEN_HOSTNAME [ls -all /usr/lib/cups/filter/pstocapt*] /usr 14-11-09 7:15PM
HIDDEN_HOSTNAME% ls -all /usr/lib64/cups/filter/pstocapt*
-rwxr-xr-x 1 root root 21394 Nov 9 12:14 /usr/lib64/cups/filter/pstocapt
-rwxr-xr-x 1 root root 25595 Nov 9 12:14 /usr/lib64/cups/filter/pstocapt2
-rwxr-xr-x 1 root root 31135 Nov 9 12:14 /usr/lib64/cups/filter/pstocapt3
HIDDEN_HOSTNAME [ls -all /usr/lib64/cups/filter/pstocapt*] /usr 14-11-09 7:15PM
HIDDEN_HOSTNAME% ls -all /usr/lib64/cups/backend/ccp
-rwxr-xr-x 1 root root 16450 Nov 9 12:14 /usr/lib64/cups/backend/ccp
HIDDEN_HOSTNAME [ls -all /usr/lib64/cups/backend/ccp] /usr 14-11-09 7:15PM
HIDDEN_HOSTNAME% ls -all /usr/lib/cups/backend/ccp
-rwxr-xr-x 1 root root 16450 Nov 9 12:14 /usr/lib/cups/backend/ccp
There are also lot of other guides based on symlinking, but still have not found anything usefull.
http://forums.opensuse.org/showthread.p … e-error-32, but here is no actual solution, just pointing to other guides, so not able to benefit from the post.
Last edited by nartes (2014-11-09 16:51:39)

Rajesh
Thanks for your reply
Which directories do I specifically need to check the permissions on?
The clone is set to run as oracle - It has created the ORACLE_HOME in /us005/app/oracle/product and the uid is correct
This is the oraparam.ini directory - everything looks OK and the /tmp directory is set to full permissions userwide at 777
<us005> /tmp/oemchd863CE3C6FE5E7376E0440003BA7D7159/ClonerStage/Disk1/install/solaris :# ls -lrt
total 256
-rw-r----- 1 oracle oinstall 67896 Mar 4 2005 runInstaller
-rw-r----- 1 oracle oinstall 17404 Mar 4 2005 lsnodes
-rw-r----- 1 oracle oinstall 7546 May 13 08:22 oraparam9ir2.ini
-rw-r----- 1 oracle oinstall 7552 May 13 08:24 oraparam64b9ir2.ini
-rw-r----- 1 oracle oinstall 7226 May 13 08:25 oraparam.ini
-rw-r----- 1 oracle oinstall 7381 May 13 08:26 oraparamias904.ini

How do I install Printer Canon MF6550?

Hello,
I'm trying to install the Canon MF6550 and I can not get it to print. When I go to add a printer "Canon MF6500 Series (UFRII LT)" shows up. I select it and then go to "select printer software" and select "Canon MF6500 Series UFRII LT (US)" but when I go ahead and try to print I get this message "Cannot communicate with the printer, or the printer is not supported, check the printer connection and add it again. Then, if the print dialog box has a printer info button, acquire the printer information: 10322"
I'm not sure what I'm doing wrong. Any advice would be great.
Thank you so much,
Anna

Hello Anna and welcome to Apple Discussions.
The UFR II driver used by the Canon MF series requires bi-directional communication. This is usually no issue with the printer connected directly to the Mac via USB cable, however if the printer was connected to some other device, such as a wireless router, a USB print server or even another computer and shared, then the driver is unable to function correctly and shows the error you are currently getting. If you do have the printer connected directly to the Mac via a USB cable then the cable may have a fault and is stopping the communication with the printer.
Also, not sure if this model supports Ethernet connections, but if it is connected via Ethernet to your Mac then there could be a problem with firewall settings or port filtering.
Can you reply with how you have the printer connected to your Mac.
Pahu

Wireless printing - Canon Pixma MP600R

Hi there
I recently bought a Canon Pixma MP 600R printer with WiFi so that it wasn't tied to my iMac. The setup seems to run well and I can print test pages such as head alignment. However when I try to print from an application (Safari, Word, Excel) I get an error 300 printer not connected.
When I look through the Printers through Printer Utility I see it as a wireless printer, can print the test pages and the wireless details (WEP password, Router name etc are correct). However when I go through system preferences/Print & Fax it shows up as printer location 'Directly attaced by USB', which is not true.
The only time it was attached by USB was the first installation, which it was required. I can't seem to change this option and have tried re-installing the drivers from the Canon website.
Anyone got any ideas?
Thanks
David

And here is the full email from Canon support:
Dear Customer,
Thank you for your recent enquiry regarding your Canon product.
Intel Macs do not work well with the original driver release and we have released udpated software which does fully support Intel Macs and confirmed to be probelm free from Mac OS 10.4.6 to 10.4.10.
Latest drivers / software can be downloaded from the following link by clicking driver downloads:
http://software.canon-europe.com/products/0010397.asp
Reset the printer by holding down the resume button until the power light has blinked 10 time. The first time the light just goes off after this the power light will blink. This will reset the wireless configuration on the printer.
**We suggest following this procedure to remove the current driver set and installing the latest.**
** Read note at bottom first.
- Go to Applications > Utilities and double click the Printer Setup Utility.
- In the Printer List select all registered Canon printers and then click delete.
- Go to Macintosh HD > Library > Printers. Choose the Canon folder and move it to the Trash > Empty Trash.
- Disconnect the printer > Reboot Mac
As a bear minimum you will need to download the following files from the website:
1 - MP600R Printer Driver Ver. 5.7.2 (Mac OS X)
2 - MP600R Scanner Driver Ver. 12.11.0 (Mac OS X)
3 - MP Navigator Ver. 3.0.1 (Mac OS X)
4 - IJ Network Tool Ver. 2.20 (Mac OS X)
Once the pritner has been through re-initialisation confirm the network details that your WiFi network is using. You will need to take down the following:
IP address range used
Subnet Mask
Default Gateway
SSID (case sensitive)
Encryption key / type (case sensitive)
Please download and install in the order listed above and do not connect the printer using USB until you have installed the drivers (stage 2).
** Try adding printer first**
Once you have followed through the wizard for the wireless setup which will appear once the IJ Network Utility is installed you need to add the network printer.
This is done by going to Applications > Utilities and double click the Printer Setup Utility (you will see the USB printer in the list). Click Add > More Printers > select Canon IJ Network from the drop down menu > select the printer listed under Canon IJ Network area and click Add.
Now when you go back to the Printer Setup Utility you will see the network printer listed with a MAC address just after it. Select the printer > click set to default. Disconnect the USB cable and attempt a few test prints.
The IP address for the printer must be unique and can be either manualy assigned or dynamicaly assigned based on the settings made in the IJ Network Utility.

Problems with my printer canon mp520

Hello Arch community, i try to install my printer canon mp520, installing cups and the driver from aur cnijfiltermp520 but when i wanna test my printer, it gives me this error /usr/lib/cups/filter/pstocanonij failed do you know what kind of problem is it??? thanks for all see ya everybody

I have exactly the same issue on a newly bought Toshiba satellite running Windows 8.1 64bit. Any problem resolution available?

Error while printing.

Error while printing.

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

Error E02 Printer Canon MG 2170

Similar Messages

Maybe you are looking for