Error Employee is not allowed to use cost object

I am getting below error when I try to submit my expense.
Employee 1833539 is not allowed to use cost object 9443688 - 10 of type Sales Order Item on 05/01/2014
I cheked few things as below.
1. I do have valid sales order with valid end date
2. I did enter my time in ISP for the date in question
3. The work location entered for the date in question is "On Premise" which means I travelled.
has anyone faced similar issue? Any help is greatly appreciated.
Regards,
Rajesh

I suggest that you report an incident so that your travel department can confirm if you are staffed on the SO in SAP Cloud for Travel and Expense.

Similar Messages

"Create delivery" not allowed (Sys. status Cost, object VB0000000237000010)

Dear All,
While creating delivery i am getting the error saying as below,
"Create delivery" not allowed (Sys. status Cost, object VB0000000237000010). and allowing me to the process delivery. we are the scenario for make to order process.
please suggest the solution.
kamlesh panchal

Not clear on your comments
Create delivery "not allowed" (Sys. status Cost, object
VB0000000237000010). and "allowing me to the process delivery"
When the error message says creating delivery is not allowed, then how are you able to process delivery.
Nevertheless, go to VA02, input the sale order reference and execute. From top menu bar, click on "Goto -- Header -- Status". There again click on "Object status" and check whether any lock is there. If so, change it and then retry
thanks
G. Lakshmipathi

Error in COR1 - Material not allowed to use

Hi,
Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
Regards,
Suresh

Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
look for material master changes
Regards
Ratan
Edited by: Ratan on Jun 22, 2009 4:17 PM

How to solve error - default position not allowed

Dear friends,
While hiring a new person i am getting the error "default positon not allowed" in infotype 0001.
PLOGI-PRELI switch for default positon is maintained. Kindly help.

Dear Neeta,
As per your scenerio,it maybe that the position once used can not be used again or default position has been restricted to
assign kindly check the same with ABAP and also be informed that these kind of restriction are being made to get the proper cost
centre attachment for the position/employee that helps in correct posting of documents while posting payroll.
hopes it will help for you.
rgds,
Priyanka

Error: decimal places not allowed

Hi,
I am entering a PO in currency JPY(Japanese Yen).However when I try to enter a PO with net price for one of the items as say 2.71,it gives error decimal places not allowed.
I have maintained currency rate as 100 local currency=3.1 Yen
It only gives problem while using this currency.
What is the way out ?
Regards,
manOO

Hi,
Check the config of the currency code (OY04), it is probably set to not allow decimal places.
If this is the case, don't change it, simply enter a price of 271 with a price unit of 100, in the PO. This will give you a price of 2.71 for one
Steve B

Http error 405 method not allowed sap content server windows

Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

Getting an error - group function not allowed here

Below is the merge statement...
getting an error - group function not allowed here
WHY????
merge into summary
using
(select
a.user_id,
min(a.start_time_utc),
max(a.end_time_utc),
sum(a.duration_seconds),
/*total_upload
total_download
total_traffic,*/
max(r.package_id),
last_usage_charge, -------hard coded
max(r.peak_rate),
max(r.bst_plantype),
max(r.free_value), ---for free value
a.IsPeak,
sum(a.TotalDiscount)
from aaa_sessions a,rate_plan r,subscriber_info si
where
si.EXTERNAL_ID=a.USER_ID
and
si.PACKAGE_ID=r.PACKAGE_ID
group by
user_id,bst_plantype,ispeak)t ------do we need to use alias here
on
(summary.user_id=t.user_id
and
summary.type_of_summary=t.bst_plantype
and
summary.ispeak=t.ispeak)
When matched then
update
set
start_date =decode((t.start_time_utc-summary.start_date)-abs(t.start_time_utc-summary.start_date),0,summary.start_date,t.start_time_utc),
end_date=decode((t.end_time_utc-summary.end_date)-abs(t.end_time_utc-summary.end_date),0,t.end_time_utc,s.end_date),
total_duration=summary.total_duration+sum(duration_seconds),
total_upload=summary.total_upload+sum(upload_bytes),
total_download=summary.total_download+sum(download_bytes),
total_traffic=summary.total_upload+sum(upload_bytes)+summary.total_download+sum(download_bytes)
When not matched then
INSERT
(user_id ,
start_date,
end_date,
total_duration,
/*total_upload
total_download
total_traffic,*/
rate_plan_id,
last_usage_charge,
peak_rate,
type_of_summary,
IsPeak,
TotalDiscount)
VALUES
(t.user_id,
t.start_time_utc,
t.end_time_utc,
t.duration_seconds,
/*t.output_bytes,
t.input_bytes,
t.output_bytes+aa.input_bytes,*/
t.PACKAGE_ID,
1, ---hard coded the value
t.PEAK_RATE,
t.BST_PLANTYPE,
t.ispeak,
t.free_value);

This is the query,...
Its giving no complilation errors..
I have not used aggregate functions in the insert/update..
have used only decode...
and nowhere i found that aggegate functions not allowed in the insert/update stmts of merge..
Can u please post a link where it is mentioned...
MERGE INTO summary
USING (SELECT a.user_id, MIN (a.start_time_utc) stc,
MAX (a.end_time_utc) etc, SUM (a.duration_seconds) ds,
SUM (a.download_bytes) download,
SUM (a.upload_bytes) upload, MAX (r.package_id) pkg_id,
MAX (r.peak_rate) p_rate, MAX (r.offpeak_rate)
ofp_rate,
MAX (r.bst_plantype) plan_type,
SUM (r.free_value) free_val, a.ispeak,
MAX (r.peak_pulse) p_pulse,
MAX (r.offpeak_pulse) ofp_pulse
FROM aaa_sessions a, rate_plan r, subscriber_info si
WHERE si.external_id = a.user_id
AND si.package_id = r.package_id
GROUP BY user_id, bst_plantype, ispeak) t
ON ( summary.user_id = t.user_id
AND summary.type_of_summary = t.plan_type
AND summary.rate_plan_id = t.pkg_id
AND summary.ispeak = t.ispeak)
WHEN MATCHED THEN
UPDATE
SET start_date =
DECODE ( (t.stc - summary.start_date)
- ABS (t.stc - summary.start_date),
0, summary.start_date,
t.stc
end_date =
DECODE ( (t.etc - summary.end_date)
- ABS (t.etc - summary.end_date),
0, t.etc,
summary.end_date
total_duration = summary.total_duration + t.ds,
total_download = summary.total_download + t.download,
total_upload = summary.total_upload + t.upload,
total_traffic =
summary.total_upload
+ t.upload
+ summary.total_download
+ t.download,
last_usage_charge =
DECODE (t.plan_type,
0, (t.ds - t.free_val)
/ DECODE (t.ispeak, 0, t.ofp_pulse, p_pulse)
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate),
((t.download + t.upload) - t.free_val
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate)
WHEN NOT MATCHED THEN
INSERT (user_id, start_date, end_date, total_duration,
total_download, total_upload, total_traffic, rate_plan_id,
last_usage_charge, peak_rate, type_of_summary, ispeak,
totaldiscount)
VALUES (t.user_id, t.stc, t.etc, t.ds, t.download, t.upload,
t.download + t.upload, t.pkg_id,
DECODE (t.plan_type,
0, (t.ds - t.free_val)
/ DECODE (t.ispeak, 0, t.ofp_pulse, p_pulse)
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate),
((t.download + t.upload) - t.free_val
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate)
t.p_rate, t.plan_type, t.ispeak, t.free_val);
COMMIT;

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

ESS Business Package Error: Period type not allowed for profile ESS

Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
Jojo

Hi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi.

Content Server HTTP error: 405 Method Not Allowed in CSADMIN transaction

Hello,
After installing the content server, when configuring in CSadmin
transaction, when we try to save the new settings, I get the errror
HTTP error: 405 Method Not Allowed.
The operating system is W2008 R2 SP1. The storage type is filesystem, we do not use the MAXDB database. However, I have made so many tries, that, finally Ihave installed the system with database, although we are not going to use it (we have more content servers installed with database and they are working fine). Despite of this, it doesn't work either. The error message is the same.
The Content Server release is 6.40
Thanks and best regards,
Ana

I have seen this issue on Windows 2008 R2 with IIS 7.5. This was the solution of mine
The error 405 appears because you have installed WebDav IIS Role in IIS 7.5. Please uninstall that particular role.
Regards,
Subhash

Jquery Ajax calling code-behind Error - 405 (Method Not Allowed)

Hi,
I am working on a web form with Jquery, Ajax to call a code-behind (webservice), but I get the following error: 405 (Method Not Allowed).
See code...
../Ops/new-item.aspx
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="new-item.aspx.cs" Inherits="WebAppFrekuency.Ops.new_item" %>
<asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server">
<script src="../Scripts/js-new.js" type="text/javascript"></script>
<script src="../Scripts/jquery-1.11.1.js" type="text/javascript"></script>
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
<div id="message">
Mensaje
</div>
<div id="form">
<input type="text" id="barcode" name="barcode" /> <button id="submit" type="button">Crear</button>
</div>
</asp:Content>
../Scripts/js-new.js
$(document).ready(function () {
//Informacion de contacto
var error = false;
var message = "";
$("#submit").click(function () {
if ($("#barcode").val() == "") {
$("#barcode").css("border", "1px solid red");
error = true;
message = "Error - El campo codigo de barras es obligatorio";
else {
$("#barcode").css("border", "");
message = "";
if (error == false) {
var formData = '{name:"' + $("#barcode").val() + '"}';
// process the form
$.ajax({
type: "POST", // define the type of HTTP verb we want to use (POST for our form)
url: "new-item.apsx/Search", // the url where we want to POST
data: formData, // our data object
contentType: "application/json; charset=utf-8",
dataType: "json", // what type of data do we expect back from the server
success: OnSuccess,
failure: function (response) {
alert("Falla - " + response.d);
// using the done promise callback
event.preventDefault();
} else { alert(message); }
function OnSuccess(response) {
alert("Exito - " + response.d);
../Ops/new-item.aspx.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Net;
using System.IO;
namespace WebAppFrekuency.Ops
public partial class new_item : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
[System.Web.Services.WebMethod]
public static string Search(string epc)
return "YES";
Any ideas why I am getting this error?
Thanks,

I read the article, but problem persists, next is the web.config file
<?xml version="1.0"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices"
connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<compilation debug="true" targetFramework="4.0" />
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices"
enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false"
maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10"
applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear/>
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/>
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear/>
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<webServices>
<protocols>
<add name="HttpGet"/>
<add name="HttpPost"/>
</protocols>
</webServices>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
</customHeaders>
</httpProtocol>
</system.webServer>
</configuration>
and the machine.config file looks like
<?xml version="1.0"?>

<configuration>
<configSections>
<section name="oracle.dataaccess.client" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" restartOnExternalChanges="false" requirePermission="false" />
<section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.codedom" type="System.CodeDom.Compiler.CodeDomConfigurationHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.dataset" type="System.Configuration.NameValueFileSectionHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" restartOnExternalChanges="false" />
<section name="system.data.odbc" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oledb" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.oracleclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.data.sqlclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.diagnostics" type="System.Diagnostics.SystemDiagnosticsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="system.windows.forms" type="System.Windows.Forms.WindowsFormsSection, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
<section name="uri" type="System.Configuration.UriSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="system.runtime.caching" type="System.Runtime.Caching.Configuration.CachingSectionGroup, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="memoryCache" type="System.Runtime.Caching.Configuration.MemoryCacheSection, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
<sectionGroup name="system.xml.serialization" type="System.Xml.Serialization.Configuration.SerializationSectionGroup, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="schemaImporterExtensions" type="System.Xml.Serialization.Configuration.SchemaImporterExtensionsSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="dateTimeSerialization" type="System.Xml.Serialization.Configuration.DateTimeSerializationSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="xmlSerializer" type="System.Xml.Serialization.Configuration.XmlSerializerSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
<sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.runtime.serialization" type="System.Runtime.Serialization.Configuration.SerializationSectionGroup, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="dataContractSerializer" type="System.Runtime.Serialization.Configuration.DataContractSerializerSection, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.serviceModel" type="System.ServiceModel.Configuration.ServiceModelSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="behaviors" type="System.ServiceModel.Configuration.BehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="bindings" type="System.ServiceModel.Configuration.BindingsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="client" type="System.ServiceModel.Configuration.ClientSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="comContracts" type="System.ServiceModel.Configuration.ComContractsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="commonBehaviors" type="System.ServiceModel.Configuration.CommonBehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="diagnostics" type="System.ServiceModel.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="extensions" type="System.ServiceModel.Configuration.ExtensionsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="machineSettings" type="System.ServiceModel.Configuration.MachineSettingsSection, SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
<section name="protocolMapping" type="System.ServiceModel.Configuration.ProtocolMappingSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="serviceHostingEnvironment" type="System.ServiceModel.Configuration.ServiceHostingEnvironmentSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineToApplication" />
<section name="services" type="System.ServiceModel.Configuration.ServicesSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="standardEndpoints" type="System.ServiceModel.Configuration.StandardEndpointsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="routing" type="System.ServiceModel.Routing.Configuration.RoutingSection, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<section name="tracking" type="System.ServiceModel.Activities.Tracking.Configuration.TrackingSection, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<sectionGroup name="system.serviceModel.activation" type="System.ServiceModel.Activation.Configuration.ServiceModelActivationSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="diagnostics" type="System.ServiceModel.Activation.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.pipe" type="System.ServiceModel.Activation.Configuration.NetPipeSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<section name="net.tcp" type="System.ServiceModel.Activation.Configuration.NetTcpSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</sectionGroup>
<sectionGroup name="system.transactions" type="System.Transactions.Configuration.TransactionsSectionGroup, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null">
<section name="defaultSettings" type="System.Transactions.Configuration.DefaultSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" />
<section name="machineSettings" type="System.Transactions.Configuration.MachineSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
</sectionGroup>
<sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="browserCaps" type="System.Web.Configuration.HttpCapabilitiesSectionHandler, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="deployment" type="System.Web.Configuration.DeploymentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
<section name="deviceFilters" type="System.Web.Mobile.DeviceFiltersSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="fullTrustAssemblies" type="System.Web.Configuration.FullTrustAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="healthMonitoring" type="System.Web.Configuration.HealthMonitoringSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="hostingEnvironment" type="System.Web.Configuration.HostingEnvironmentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="httpCookies" type="System.Web.Configuration.HttpCookiesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="identity" type="System.Web.Configuration.IdentitySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="mobileControls" type="System.Web.UI.MobileControls.MobileControlsSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
<section name="partialTrustVisibleAssemblies" type="System.Web.Configuration.PartialTrustVisibleAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="processModel" type="System.Web.Configuration.ProcessModelSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
<section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="protocols" type="System.Web.Configuration.ProtocolsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToWebRoot" />
<section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="securityPolicy" type="System.Web.Configuration.SecurityPolicySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sessionPageState" type="System.Web.Configuration.SessionPageStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="trust" type="System.Web.Configuration.TrustSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webParts" type="System.Web.Configuration.WebPartsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
<section name="sqlCacheDependency" type="System.Web.Configuration.SqlCacheDependencySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere" />
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
</sectionGroup>
</sectionGroup>
</sectionGroup>
<sectionGroup name="system.xaml.hosting" type="System.Xaml.Hosting.Configuration.XamlHostingSectionGroup, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
<section name="httpHandlers" type="System.Xaml.Hosting.Configuration.XamlHostingSection, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</sectionGroup>
<section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</configSections>
<configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
<providers>
<add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses RsaCryptoServiceProvider to encrypt and decrypt" keyContainerName="NetFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
<add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses CryptProtectData and CryptUnProtectData Windows APIs to encrypt and decrypt" useMachineProtection="true" keyEntropy="" />
</providers>
</configProtectedData>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Data.Entity" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
<dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
<assemblyIdentity name="MySql.Web" publicKeyToken="c5687fc88969c44d" culture="neutral" />
<bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
providerName="System.Data.SqlClient" />
<add name="LocalMySqlServer" connectionString="" />
<add name="OraAspNetConString" connectionString=" " />
</connectionStrings>
<system.data>
<DbProviderFactories>
<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
<add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
<add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
<add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.1.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
</DbProviderFactories>
</system.data>
<system.serviceModel>
<extensions>
<behaviorExtensions>
<add name="persistenceProvider" type="System.ServiceModel.Configuration.PersistenceProviderElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowRuntime" type="System.ServiceModel.Configuration.WorkflowRuntimeElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="enableWebScript" type="System.ServiceModel.Configuration.WebScriptEnablingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttp" type="System.ServiceModel.Configuration.WebHttpElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="serviceDiscovery" type="System.ServiceModel.Discovery.Configuration.ServiceDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="endpointDiscovery" type="System.ServiceModel.Discovery.Configuration.EndpointDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="etwTracking" type="System.ServiceModel.Activities.Configuration.EtwTrackingBehaviorElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="routing" type="System.ServiceModel.Routing.Configuration.RoutingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="soapProcessing" type="System.ServiceModel.Routing.Configuration.SoapProcessingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowIdle" type="System.ServiceModel.Activities.Configuration.WorkflowIdleElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowUnhandledException" type="System.ServiceModel.Activities.Configuration.WorkflowUnhandledExceptionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="bufferedReceive" type="System.ServiceModel.Activities.Configuration.BufferedReceiveElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sendMessageChannelCache" type="System.ServiceModel.Activities.Configuration.SendMessageChannelCacheElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="sqlWorkflowInstanceStore" type="System.ServiceModel.Activities.Configuration.SqlWorkflowInstanceStoreElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowInstanceManagement" type="System.ServiceModel.Activities.Configuration.WorkflowInstanceManagementElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior" type="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior, Microsoft.VisualStudio.Diagnostics.ServiceModelSink, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</behaviorExtensions>
<bindingElementExtensions>
<add name="webMessageEncoding" type="System.ServiceModel.Configuration.WebMessageEncodingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="context" type="System.ServiceModel.Configuration.ContextBindingElementExtensionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="byteStreamMessageEncoding" type="System.ServiceModel.Configuration.ByteStreamMessageEncodingElement, System.ServiceModel.Channels, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryClient" type="System.ServiceModel.Discovery.Configuration.DiscoveryClientElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
<bindingExtensions>
<add name="wsHttpContextBinding" type="System.ServiceModel.Configuration.WSHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="netTcpContextBinding" type="System.ServiceModel.Configuration.NetTcpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="webHttpBinding" type="System.ServiceModel.Configuration.WebHttpBindingCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="basicHttpContextBinding" type="System.ServiceModel.Configuration.BasicHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</bindingExtensions>
<endpointExtensions>
<add name="dynamicEndpoint" type="System.ServiceModel.Discovery.Configuration.DynamicEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="discoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.DiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpDiscoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpDiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="announcementEndpoint" type="System.ServiceModel.Discovery.Configuration.AnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="udpAnnouncementEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpAnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="workflowControlEndpoint" type="System.ServiceModel.Activities.Configuration.WorkflowControlEndpointCollectionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webHttpEndpoint" type="System.ServiceModel.Configuration.WebHttpEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add name="webScriptEndpoint" type="System.ServiceModel.Configuration.WebScriptEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</endpointExtensions>
</extensions>
<client>
<metadata>
<policyImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</policyImporters>
<wsdlImporters>
<extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
</wsdlImporters>
</metadata>
</client>
<tracking>
<profiles>
<trackingProfile name="">
<workflow activityDefinitionId="*">
<workflowInstanceQueries>
<workflowInstanceQuery>
<states>
<state name="*" />
</states>
</workflowInstanceQuery>
</workflowInstanceQueries>
<activityStateQueries>
<activityStateQuery activityName="*">
<states>
<state name="Faulted" />
</states>
</activityStateQuery>
</activityStateQueries>
<faultPropagationQueries>
<faultPropagationQuery faultSourceActivityName="*" faultHandlerActivityName="*" />
</faultPropagationQueries>
</workflow>
</trackingProfile>
</profiles>
</tracking>
<commonBehaviors>
<endpointBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</endpointBehaviors>
<serviceBehaviors>
<Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
</serviceBehaviors>
</commonBehaviors>
</system.serviceModel>
<system.web>
<processModel autoConfig="true" />
<httpHandlers />
<membership>
<providers>
<add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
<add name="MySQLMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
</providers>
</membership>
<profile>
<providers>
<add name="OracleProfileProvider" type="Oracle.Web.Profile.OracleProfileProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLProfileProvider" type="MySql.Web.Profile.MySQLProfileProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</profile>
<roleManager>
<providers>
<add name="OracleRoleProvider" type="Oracle.Web.Security.OracleRoleProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add name="MySQLRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
</providers>
</roleManager>
<siteMap>
<providers>
<add name="OracleSiteMapProvider" type="Oracle.Web.SiteMap.OracleSiteMapProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" securityTrimmingEnabled="true" />
</providers>
</siteMap>
<webParts>
<personalization>
<providers>
<add name="OraclePersonalizationProvider" type="Oracle.Web.Personalization.OraclePersonalizationProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
</providers>
</personalization>
</webParts>
<healthMonitoring>
<providers>
<add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
</providers>
</healthMonitoring>
<webServices>
<protocols>
<add name="HttpSoap"/>
<add name="HttpPost"/>
<add name="HttpGet"/>
<add name="Documentation"/>
</protocols>
</webServices>
</system.web>
</configuration>
Thanks,
Mario

UPK 11.1 installation error "(405) Method Not Allowed"

Hi
While assisting a customer to install UPK 11.1 I encountered an issue and a Libraryloader log was generated
System of the client to install UPK 11.1 on is
- Virtuele machine W2008 x64 R2
- Separate sql cluster for the databases
Both machines are in the same domain!
2012-12-14 15:18:36 INFO Application started
2012-12-14 15:18:36 INFO Command line: "C:\Program Files (x86)\User Productivity Kit\UPK Developer 11_1Server\LibraryLoader.exe" "C:\install\Oracle UPK\V30865-01\UPK_Pro_v11.1.0" "/librarylocation:http://vupk:80/UPKDevcontent" /language:NL /producttier:Server /branding:UPK /overwrite:no /update:no /authenticationtype:windowscurrent
2012-12-14 15:18:36 INFO Source path: C:\install\Oracle UPK\V30865-01\UPK_Pro_v11.1.0
2012-12-14 15:18:36 INFO Library location: http://vupk:80/UPKDevcontent
2012-12-14 15:18:36 INFO Language: NL
2012-12-14 15:18:36 INFO Product tier: Server
2012-12-14 15:18:36 INFO Branding: UPK
2012-12-14 15:18:36 INFO Overwrite: False
2012-12-14 15:18:36 INFO English only: False
2012-12-14 15:18:36 INFO Options:
2012-12-14 15:18:36 INFO Import system documents: True
2012-12-14 15:18:36 INFO Copy files: True
2012-12-14 15:18:36 INFO Authenticate only: False
2012-12-14 15:18:36 INFO Authentication type: windowscurrent
2012-12-14 15:18:36 INFO User name:
2012-12-14 15:18:36 INFO Password: ***
2012-12-14 15:18:36 INFO Update: False
2012-12-14 15:18:36 INFO Loading documents in Server - Client environment
2012-12-14 15:18:36 INFO Authenticate by Windows authentication
2012-12-14 15:18:36 ERROR Gkn.OnDemand.Library.OfflineException:
at Gkn.OnDemand.Library.LibraryComponent.AuthenticateProfile(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:line 388 at Gkn.OnDemand.Library.LibraryComponent.Run(String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:line 264 at Gkn.OnDemand.ComponentModel.ApplicationCore.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\AppCore.cs:line 154 at Gkn.OnDemand.ComponentModel.Application.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\Application.cs:line 538
InnerException:
Gkn.OnDemand.Library.LibraryConnectionException: There is a problem with the server configuration. See your system administrator with the following information.
at Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:line 98 at Gkn.OnDemand.Library.LibraryService.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryService.cs:line 290 at Gkn.OnDemand.Login.LoginService.Authenticate(IUserProfile userProfile, Boolean login) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\Login\LoginService.cs:line 183
InnerException:
System.ServiceModel.ProtocolException: The remote server returned an unexpected response: (405) Method Not Allowed.
Server stack trace: at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Gkn.OnDemand.Service.Content.RepositoryInfoServiceReference.IRepositoryInfoService.GetLibraryInfo() at Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:line 91
InnerException:
System.Net.WebException: The remote server returned an error: (405) Method Not Allowed.
at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
Would it be possible to have a SQL/IIS configuration plan that we can share with a customer and have in this plan the minimum requiremnts regarding settings and autorisations?
I suspect there is something wrong with their SQL or IIS settings however I didn't succeed to determine that.
Or if their is a possibility to share their settings here and get feedback on that to solve the issue?

The "Method Not Allowed" message is a very common message, meaning that there are problems in GET/POST actions.
To answer your question about teh basic IIS configuration:
The Roles must include IIS default features and under IIS Authentication you must enable Windows Based authentication if you plan to use this. If you plan to use forms authenticaton you don't need this option under the IIS Role. In that case the basic authentication is fine.
Under Features I recommend also to set teh option on for ASP.NET and especially the option for WCF activation. Without it might also work, but this installs the .Net framework properly. Then install UPK 11 and let UPK install .Net framework 4.
If you installed .Net framework 4 manually, make sure it is registered properly, for example with the command: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -ir

Apache reports error 405 Method Not Allowed

Hello, I have been attempting AJAX techniques on a portlet and am getting a weird error message in apache's access log. I checked the logs because the requestObject.open method I am using in some javascript was not returning any results.
Apache is reporting error '405 Method Not Allowed' on my attempts to connect to a servlet from a portlet.
I have found doc 427497.1 which gives three steps to solving this. The steps are to fix your hosts file, make sure your url does not resolve to a public address, and restart OC4J. But my hosts file is correct, and the url I have does not resolve to a public address.
I'm following the steps in Oracle's "Building Highly Interactive Portlets With AJAX".
This ajax test is being run deployed on OAS; not from JDeveloper. This OAS is infrastructure and middle-tier on same box. Portal, Forms and Reports are working great.
When I access the servlets url directly from my browser, it works. This error only happens when I attempt to access the servlet from a portlet.
Any ideas would be appreciated.

Reposted in Portal - General.
Sorry.

Database Connection: Http Error 405 Method Not Allowed

Hi,
I am new to this forum, but I am having an issue I hope you can help with. I have a database on my MS SQL Server 2008. I am trying to access it with my DW8 page, and while I can code a connection successfully, I can't use the Database or Bindings Tab in DW. I can successfully get the database to show if I "Build..." the connection (Test Connection works.) However, if I click ok, the database shows up in my tab, but under Tables... (none)! Also, if I hit Test button on the OLE Db Connection window, I get Http Error 405 Method Not Allowed. If I use the SQL Server Connection Option, I get the same result.
I have scoured Google for an answer. There are a lot of links to questions, but no answers. There was apparently an answer on adobe.com, but the link is broken: http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm. Any suggestions would be greatly appreciated.
Have a great Day!
RobF

Thank you SnakEyez02.
I had the Testing Server set to Local/Network but didn't have MySQL installed locally. Changed that setting to FTP and it picked up on the database correctly.
When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless. I guess this must just be a difference between it and MySQL.
Thanks for the advice. Much appreciated.
NJ

Error 405 Method Not Allowed

I am using Dreamweaver 8 (Studio 8) and made some PHP pages
finally got connected to the database and everything was working
fine for two weeks. Then out of the blue a few days ago all of a
sudden I can not connect to the database through Dreamweaver. I can
connect using SQLyog but not Dreamweaver just keep getting an
"Error 405 Method not Allowed"
Any Ideas???

found my own fix finally
http://www.dreamweavermxsupport.com/index.php?type=article&id=85&block=1&pid=60&sid=61

Error Employee is not allowed to use cost object

Similar Messages

Maybe you are looking for