Error : EMV115 Meter readings are not yet complete

Hi,
Does somebody know the cause(s) for this error message and how can I solve this.
Thanks in advance
FedeX

Hi,
yes, just do as the long text says: create the missing meter readings - or create the corresponding SM orders. This error usually occurs during move in - when a big check is performed.
KR
Uwe

Similar Messages

  • Error "The sales document is not yet complete" when using SD_SALES_DOCU_MAINTAIN

    Hi there,
    I have built an update program for updating the sales documents (VA42). In that program I am using the BAPI-SD_SALES_DOCU_MAINTAIN. It works fine except for the sales docs that are incomplete. For those sales docs I have the following messages in the Return-internal tab. from the BAPI:
    V4
    233
    VBAKKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V1
    555
    The sales document is not yet complete: Edit data
    V1
    311
    Collection Contract 55259592 has been saved
    The sales doc is indeed incomplete. What is missing in this sales doc is the prices. After discussion with the people from the business, I found out that it is impossible to complete those sales docs.
    In the transaction-VA42 it is possible to save such sales docs, after clicking the "Save" button in the pop-up "The sales doc is incomplete. (Save - Edit - Cancel)".
    The standard reports SDVBUV00 and SDVBUK00 do not help.
    Is there any other possibility or other BAPI that I could use to save such sales docs?
    Thanks,
    Dimce

    no issue anymore. On the QA-system it didn't work and on the production one it works.

  • Error RSM006 "Attributes are not yet maintained"

    Hello everyone, I have had a problem with two infopackages,  one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
    Do you have any suggestion to solve this problem?
    Thank you very much.
    Best Regards
    Maximiliano Valin

    Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
    This is the help message that appear when the error happens.
    Attributes are not yet maintained
    Message no. RSM006
    Diagnosis
    The attributes have either not yet been created or activated.
    The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
    Procedure
    Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
    Thank you for everything.

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • Infospoke error +The last extraction for this InfoSpoke is not yet Complete

    Hello Experts,
                      I am receiving the error  "The last extraction for this InfoSpoke is not yet Complete " while starting the load for Infospoke.
    Please advice
    Thanks and Regards,
    Rezwan Asraf Ali

    Hi,
    This error RSBO320 is usually related to an inconsistency of infospoke internal tables which is will need to be reset manually by SAP developers. So you'll probably be best opening a ticket under BW-WHM-DBA-OHS.
    Rgds,
    Colum

  • Last delta update is not yet completed

    Hi,
    in data loading we are facing problem, and the error is
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    today data is not loaded i have checked the data targets there are two error(red) records are there, so i deleted these red records diectly with out marking to red  even though records are in red.
    now i am repating the loading system is showing the above message.
    please help me how to load the data.
    Regards,
    Satya.

    HI Satya
       First make the status red in DSO or cube what ur loading by doing QM activity.Then goto monitor RSMO and then make the status RED.So only u can able to reload.If u didnt make the status red u will get the above message.
    Regards
    Arun kumar

  • Post order processing for sales document is not yet complete

    hi,
    sap gurus,
    i am facing the error while saving the sales order and this ticket is unique and it is saying that
    "post order processing for sales document is not yet complete".
    please help me in this regard.
    and it is blocking the order for further processing.
    regards,
    balajit

    I dont think this is a standard error message.  Some exit is applied for sale order to meet some requirements.  You need to check with your ABAPer.
    In fact, you can conclude yourself based on the error message number.  If it starts with Z, then the above holds good.
    thanks
    G. Lakshmipathi

  • Error submitting tasks: Operation could not be completed within the specified time

    I've created a Batch Application and I'm having an issue running a job.  Its suppose to synchronize 2 azure blob containers.
    In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one.  Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
    on the number of files that need to get copied over.
    Once we have the files that need to be copied, we group them into sets and create a task for each set.
    The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
    On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
    Looking in the JobLogs, I see this:
    The job orchestrator finished
    Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
    within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
    Has anyone seen this before?
    Thanks,
    matt

    This error is usually a transient error, typically related to an internal storage timeout.  We're working on a fix for it.
    In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks.  (Note that the tasks that already succeeded will not be re-run, and
    we will not re-run the job splitter to create new tasks.)
    Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

  • Document from last posting run in 2007 are not yet updated

    Hi Guru's,
    When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
    So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click  it says: "Document from last posting run in 2007 are not yet updated"
    So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
    Please help how we are able to post asset accounting for 2009.
    Thanks
    Mila
    Edited by: Mila Calonge on May 4, 2009 10:02 AM

    check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
    Those might not have processed due to GL account assignment or cost center master data issues.

  • Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error".  I tried rebooting and that didn't work.  Any help would be appreciated.  Thanks.

    Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error".  This never happened b4.  I tried rebooting and that didn't work.  Any help would be appreciated.  Thanks.

    Hi ,
    Thank you for your question.
    This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
    Default Web Site:
    Exchange Back End:
    Then IIS must be restarted.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim

  • HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

    I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
    I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

    yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
    and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
    trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
    no worries

  • Icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either.

    icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices

    Curretly, there is an iCloud blackout.  It started this morning around 2AM California time (Pacific), 5AM New York (Eastern).  A lot of people have been having issues all day, including me.  No iCloud services are online.  Even Find My iPhone is down.

  • Process chain termination - Attributes are not yet maintained

    Hi Experts ,
    I am running a process chain in the production system , which is failed , however the below objects in the chain is completing successfully.
    Please see the below msg descriptions
    Attributes are not yet maintained
    Entire chain now has status 'R'
    Process Start Process, variant Technical InfoObjects Attribute Load has status Undefined
    Process Execute InfoPackage, variant InfoPackage has status Undefined ...
    Process Execute InfoPackage, variant BW Systems has status Undefined
    Process Execute InfoPackage, variant InfoSource has status Undefined
    Process Execute InfoPackage, variant InfoCube has status Undefined
    Process Execute InfoPackage, variant Application Component has status Undefined
    and many things which are undefined ..
    Have nay one come across this issue , how to resolve this ?
    Thanks

    Hi,
    Is there any changes done for the respective IP's/objects used in the chain recently. It might be the cause and before running jst test the chain using CHECK option and accordingly redesign, activate and schedule the process chain,
    rgds,

  • Request is in green, but in the monitor it says "Not yet Completed/warning"

    When I go to the manage screen of ODS I see green in "Request Status". If I go the Monitor and details couple of data packages are still in Yellow color.
    Over all it says Not yet Completed/warnings with yellow indicator..
    What it means?

    In the Monitor screen Under the Details Tab Go to any yellow marked Data Package and see if any message is available there.
    Regards.

  • HT201209 If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for