Error encountered when scrolling over particular InDesign CS2 page, causes file to crash

I am working on a 36.6 MB InDesign file with 134 pages. There is at least one photo on each page. Most of the photos are linked in to a server.
When I scroll to page 93, I always get an error message and the option to debug. But the debug always fails and InDesign closes.
I have updated my InDesign CS2 to 4.0, but have had no luck.
Here is the error signature:
AppName: indesign.exe AppVer: 4.0.5.688 ModName: master page.rpln
ModVer: 4.0.5.688 Offset: 000053b6
Please, please help.

Is page 93 based on a different master from the others?
I think this could be caused by either a bad graphic or a bad font on the page.
I also remember, vaguely, something about closing the links palette and or Navigator might help, as probably, would moving the links to your hard drive.
Peter

Similar Messages

I updated to FF4 and every time i scroll over anything on the page it gets blacked out where I can't see it. Can this be fixed

I had firefox 3.6 and it was the best browser ever so I updated to ff4 and I like the concept but it is not useable. When scrolling over anything on the page. I get blackouts where I cant see what I have highlighted to click on. I have an alienware theme for my windows 64 bit system could this be affecting the program. some one help I have to use the old fire fox which aint bad but the new one looks better

Check the Application folder.
If it is not there, contact YNAB Finance for a OS X Yosemite compatible version of the application.
Best.

'DOWNLOAD ERROR!' when trying to update InDesign CC

'DOWNLOAD ERROR!' when trying to update InDesign CC 2012.
There is no error 'code' number--just a 'RELOAD APPLICATIONS' button that does not do anything.
I've restarted and tried to update multiple times, I've uninstalled and then tried to reinstall--all to no avail.
Any ideas?

Hi Paul,
Can you please attach the screen shot of the error what you get.
Thanks,
Ratandeep Arora

Error encountered when checking for software update!

How come there is an error encountered when I was trying to check for the software update for the iPad? Presently, my iPad is on iOS 6. So I would like to ask if anyone of you here experiencing the same thing or it is just me? And are there any specific reasons for this phenomenon? Thanks for helping me in overcoming this matter. Your efforts will be appreciated.

Now I completely understand what you are trying to do.
There is no update for any of the iPad versions except for the iPad Mini. There was an update released yesterday for the iPad Mini and the iPhone 5 only. If you are running iOS 6.0.1 - you ARE up to date regarding the software.
But - you should still not be getting an error message when you look for the update. You should see this message on the iPad.
If your phone is the iPhone 5 - you should be seeing the update that is available.

Highlighting button and text when scrolled over

Hello,
I have a menu that I wouldlike the four buttons to be highlighted when scrolled over wiht the navigator. I a way that only one shall be highlighted then you press down and the next will become highlighted, leaving the other one with no highlight. Any help?

In this case you would need to use a highlight layer created in an image app like Photoshop. The background image for the menu would not contain any text, just a shape (or whatever) to indicate to the viewer there is a button there. The overlay would then contain the text to appear within the button area.
You would create this in gray scale, and use the colour mapping tools within DVDSP to allocate the desired colours for the selected and activated states.
In this way, only the background area will show when the button is not selected (i.e. is in the 'normal' state), but clicking on (or mousing over) the buttons will reveal the text in the highlight layer.

Hello, I am trying to place a file typed in Japanese in to an Indesign CS2 page.

Hello, I am trying to place a file typed in Japanese in to an Indesign CS2 page. The original text is a Microsoft Word file.
When it is saved as a .pdf, I am not able to do anything with it. I use a MAC running on Tiger 10.4.11.
I need it for an insert in a CD.
Any help on this?
thank you very much.
S

Ah -- you are placing the PDF, right? Use the Word file instead. A PDF file is not a text file, so you get it as an image.

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do?

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do? The files seem to be there but I don't know if they are being backed up to cloud.

Hi, DickmoAZ.
Thank you for visiting Apple Support Communities.
This sounds like a permission issue most likely with the iTunes Media folder. Here is an article that will help you troubleshoot this issue.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Cheers,
Jason H.

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
Is was working this morning!

Depends on your operating system
Go to google, try typing in
Change permissions Windows
or
Change permissions Mac

Cloudroom error when trying to import a video that causes Premiere to crash

I'm getting this cloudroom error when trying to import a video that causes Premiere to crash

Hi K Hayes,
Kyle Hayes wrote:
I'm getting this cloudroom error when trying to import a video that causes Premiere to crash...
It is difficult to see the entire message of the warning dialog box, but I suspect it is the following: c:\cloudroom\releases\2014.09\shared\adobe\mediacore\mediafoundation\api\inc\Keyframe/Key frame.h-146
If so, see this post by one of our engineers: Re: Premiere pro cc 2014.2 crashes when opening a project
Removing any imported or third party presets might help the issue.
I'm really sorry for this issue. We are currently investigating the cause.
Thanks,
Kevin

Error message reads, " Wizard Interuppted before InDesign CS2 was comletely installed" when removing

Adobe Tech Support no longer supports CS2 since the release of CS4 and has referred me to knowledgebase and the forum for help.
This is my original problem:
When you try to start Adobe InDesign CS2, or Adobe InCopy CS2, the application returns one of the following error messages:
-- "Could not personalize your copy of [application] because of missing or invalid personalization information."
-- "Please personalize your copy of [application] to continue the setup process."
-- "The serial number you provided is not valid. Please check your serial number and re-enter it"
I was referred to:
http://kb.adobe.com/selfservice/viewContent.do?externalId=331649
The instructions for all methods require that I remove InDesign, but I get an error message that says "Wizard Interuppted before InDesign CS2 was completely installed" when removing.
My OS is Windows XP. Any help is highly appreciated.
Thank you!

Step one is to back up your computer in case anything goes wrong.
Once you've done that, look at http://kb.adobe.com/selfservice/viewContent.do?externalId=331300 which lists all the folder locations for the creative suite along with the registry keys. It says you should uninstall using ad/remove, but if this doesn't work it should be OK to remove things manually and edit the registry, then run the Windows Installer Cleanup Utility.
At that point you should reboot and you should be able to try installing again.

"SignalNthResponder(): error code not reset" upon opening Indesign CS2 Debug

I've been using InDesign CS2 Debug (with IDCS2_Updater_Roman_Debug_2.exe file version 4.1.100.1332 applied) on Windows XP for several months with no problems, but lately I've been getting the following sequence of errors upon opening InDesign, which causes InDesign to shutdown. It also occurs before code flow even reaches the constructor for my plug-in so I have no idea what is causing it.
1. (ASSERT) SignalMgr::SignalNthResponder(): error code not reset
2. (ASSERT) Putting up an alert when the global error state is not kSuccess can cause crashes if a command is fired while the alert is up! Try moving call to ErrorUtils::PMSetGlobalErrorCode(kSuccess) to before call to CAlert::ErrorAlert.
3. (Adobe InDesign) Adobe InDesign is shutting down. A serious error was detected. Please restart InDesign to recover work in any unsaved InDesign documents.
4. (ASSERT) ProtectiveShutdown - Debugger break
5. Then it shuts down.
But of course restarting InDesign only repeats these messages. Restarting the computer does nothing to help. The only way I have found to alleviate the problem is to uninstall and reinstall InDesign Debug. But then after using InDesign Debug for a couple of days without problems, this sequence reappears. Anyone know how to end this vicious cycle?
Thanks,
Miles

I've been using InDesign CS2 Debug (with IDCS2_Updater_Roman_Debug_2.exe file version 4.1.100.1332 applied) on Windows XP for several months with no problems, but lately I've been getting the following sequence of errors upon opening InDesign, which causes InDesign to shutdown. It also occurs before code flow even reaches the constructor for my plug-in so I have no idea what is causing it.
1. (ASSERT) SignalMgr::SignalNthResponder(): error code not reset
2. (ASSERT) Putting up an alert when the global error state is not kSuccess can cause crashes if a command is fired while the alert is up! Try moving call to ErrorUtils::PMSetGlobalErrorCode(kSuccess) to before call to CAlert::ErrorAlert.
3. (Adobe InDesign) Adobe InDesign is shutting down. A serious error was detected. Please restart InDesign to recover work in any unsaved InDesign documents.
4. (ASSERT) ProtectiveShutdown - Debugger break
5. Then it shuts down.
But of course restarting InDesign only repeats these messages. Restarting the computer does nothing to help. The only way I have found to alleviate the problem is to uninstall and reinstall InDesign Debug. But then after using InDesign Debug for a couple of days without problems, this sequence reappears. Anyone know how to end this vicious cycle?
Thanks,
Miles

How to create an image that when scrolled over automatically scrolls between 3 image

What i am trying or rather what i want to achive is, when an image is scrolled over it automaticly scrolls between 3 pictures and when it is rolled off of goes back to a specific image. How do i do something like this i know its going to have to be a javascript item, but how do i do it?

Hi Gramps,
Welcome back. Haven't seen you around for a while.
Please have a look here and tell us if there is a script that comes close to what you want.
Did you forget to add something?
Nancy O.

Error encountered when clicking on the UWL

Hi,
I have this exception when selecting on the pending task in the UWL where it accompany with PAGE_NOT_FOUND.
Any idea how to resolve?
Error looking up url: portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime/com.sap.caf.eu.gp.worksets.runtime/com.sap.caf.eu.gp.pages.procinstance
[EXCEPTION]
javax.naming.NameNotFoundException: [Xfs] Object not found: com.sap.caf.eu.gp.worksets.runtime/com.sap.caf.eu.gp.pages.procinstance at portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime/com.sap.caf.eu.gp.worksets.runtime [Root exception is javax.naming.NamingException: [Xfs] Object not found: com.sap.caf.eu.gp.worksets.runtime/com.sap.caf.eu.gp.pages.procinstance at portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime/com.sap.caf.eu.gp.worksets.runtime]
at com.sapportals.portal.pcd.gl.PcdPersContext.filteredLookup(PcdPersContext.java:555)
at com.sapportals.portal.pcd.gl.PcdPersContext.deepFilteredLookup(PcdPersContext.java:467)
at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:480)
at com.sapportals.portal.pcd.gl.PcdProxyContext.recursiveLookup(PcdProxyContext.java:1503)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1579)
at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1523)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1321)
at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:71)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1314)
at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1307)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.sapportals.portal.pcd.pcm.roles.RoleNavigationConnector.getNodes(RoleNavigationConnector.java:463)
at com.sapportals.portal.pcd.pcm.roles.RoleNavigationConnector.getNode(RoleNavigationConnector.java:337)
at com.sapportals.portal.navigation.cache.connector.CacheNavigationConnector.getOriginalNode(CacheNavigationConnector.java:905)
at com.sapportals.portal.navigation.cache.connector.CacheNavigationConnector.getNode(CacheNavigationConnector.java:777)
at com.sapportals.portal.navigation.NavigationService.getNavNode(NavigationService.java:1591)
at com.sapportals.portal.navigation.NavigationService.getNode(NavigationService.java:615)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentNavNode(NavigationEventsHelperService.java:443)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:483)
at com.sapportals.portal.navigation.NavigationEventsHelperService.getCurrentLaunchNavNode(NavigationEventsHelperService.java:471)
at com.sapportals.portal.navigation.workAreaiView.doContent(workAreaiView.java:125)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:200)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher$5.service(RequestDispatcherFactory.java:308)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$PortalComponentRequestDispatcher.service(RequestDispatcherFactory.java:298)
at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:278)
at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1DoDispatchRequest.run(AsyncIncludeRunnable.java:359)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:372)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:176)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:606)
Caused by: javax.naming.NamingException: [Xfs] Object not found: com.sap.caf.eu.gp.worksets.runtime/com.sap.caf.eu.gp.pages.procinstance at portal_content/com.sap.pct/platform_add_ons/com.sap.caf.eu.gp.folders.gp/com.sap.caf.eu.gp.roles.runtime/com.sap.caf.eu.gp.worksets.runtime
at com.sapportals.portal.pcd.gl.xfs.BasicContext.lookup(BasicContext.java:1346)
at com.sapportals.portal.pcd.gl.PcdPersContext.lookup(PcdPersContext.java:788)
at com.sapportals.portal.pcd.gl.PcdPersContext.filteredLookup(PcdPersContext.java:547)

Hi,
Check this thread:
Page_Not_Found error encounter in GP Runtime
Reward points if it's helpful.

Exchange 2013 LED=441 4.4.1 Error encountered when trying to communicate with primary IP address

Hello,
Im running Exchange 2013 on Server 2012R2, and all has been fine for a while until some users complained that ome of there external recipients are not receiving their mails. if I look in the mail que I indeed see the messages stuck with the comment:
[{LRT=14-4-2015 14:36:14};{LED=441 4.4.1 Error encountered while communicating with primary target IP addre
ss: "Failed to connect. Winsock error code: 10013, Win32 error code: 10013." Attempted failover to alternat
e host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate
hosts.
Initially i thought it might had to do with the PTR but I checked and the reverse lookup is fine, also the mail server ip's are not blacklisted. I've tried every suggestion on all forums I could find from changing MTU sizes to disabling TLS but nothing seems
to work the majority of the mail goes out just fine but to a couple of domains it doesn't any input would be greatly appreciated.
I have only the internal DNS server configured on the NIC, only one NIC is available and OWA, Outlook and Activesync clients work just fine.

http://public.wsu.edu/~brians/errors/their.html
If this is happening when you try to send to several domains, then I suggest you might be blacklisted or otherwise being considered a spam source.
Do you have an SPF record? Is your IP address in a blacklisted range?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Error encountered when scrolling over particular InDesign CS2 page, causes file to crash

Similar Messages

Maybe you are looking for