Error encountered while executing the transform
My message failed at orchestration with the following error. Kindly help in finding the issue.
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
Shape name: CodecoMapping
ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
Exception thrown from: segment 1, progress 22
Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
Exception type: XTransformationFailureException
Source: Microsoft.XLANGs.Engine
Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
The following is a stack trace that identifies the location where the exception occured
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
Exception has been thrown by the target of an invocation.
Exception type: TargetInvocationException
Source: mscorlib
Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
The following is a stack trace that identifies the location where the exception occured
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
Additional error information:
Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
Exception type: XslTransformException
Source: System.Data.SqlXml
Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
The following is a stack trace that identifies the location where the exception occured
at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)
Hi,
It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
"Exception has been thrown by the target of an invocation" is a very generic exception. you
need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Similar Messages
-
Hi All,
I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
"Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
Anybody has an idea about this error? Please help, thank you very much.
The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
EricHI Eric,
I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
SO you can check below mentioned things
1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
again all thing mentioned above is assumption.
YOu can use debugdiag tool to see if memory leak is happening
http://www.microsoft.com/en-in/download/details.aspx?id=26798 -
App-V 5: Error encountered while executing command Mount-AppvClientPackage
I am getting this error in which no Google search reveals anyone else as having reported it anywhere. In fact, after having posted this, it was the only search result that came up with either of these two event ID's or errors.
I am trying to sequence an in house application. It's a manual install. The application runs perfectly prior to creating the package so I am not sure what this "specified file" is that it can't find. It says to refer to the AppV Client Event
Log for more details. This event was *IN* the AppV Client Event Log and there was another event along side it.
Event ID 9001
Error encountered while executing command Mount-AppvClientPackage -PackageId eb77be98-bc44-45fd-a0e5-95e0c315808b -VersionId c5013ec7-0456-401b-b99e-d988d97bfa55. Error: Application Virtualization Service failed to complete requested operation.
Operation attempted: Mount Package.
Windows Error: 0x80070002 - The system cannot find the file specified
Error module: Streaming Manager. Internal error detail: 74F0262C80070002.
Please consult AppV Client Event Log for more details.
Event ID 14016
The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
because the network connection has been lost or is unavailable. Check your network connection and try again.
The network connection is still quite alive on the client and the firewall is disabled on the App-V server. I can still reach and view the xml file when browsing to the web service on the App-V server. I can also run Sync-AppVPublishingServer from
powershell without error.
For more inside info on the app:
1. It is a manual install. A directory is simply copied to the hard drive manually.
2. An ocx file gets registered from the Syswow64 directory.
3. MySQL 5.1.13 client is installed.
4. Shortcuts are created.
5. A system DSN is created using C:\Windows\SysWOW64\odbcad32.exe
6. The app runs perfectly on the sequencer prior to creating and publishing.
UPDATE:
Get-AppVClientPackage reveals this:
PackageId : eb77be98-bc44-45fd-a0e5-95e0c315808b
VersionId : c5013ec7-0456-401b-b99e-d988d97bfa55
Name : Tietan
Version : 0.0.0.1
Path : \\wuspappv01\appv1\TietanProd\Tietan.appv
IsPublishedToUser : True
UserPending : False
IsPublishedGlobally : False
GlobalPending : False
InUse : False
InUseByCurrentUser : False
PackageSize : 217155655
PercentLoaded : 0
IsLoading : False
HasAssetIntelligence : True
The path is accessible from the client server. I can see the file. It's there.Hello,
If you execute get-appvclientpackage
And then check what is the value for Path for the package you have an issue with.
Most likely the error message means that the file in Path isn't reachable.
As indicated here;
The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
because the network connection has been lost or is unavailable. Check your network connection and try again.
Nicke Källén | The Knack| Twitter:
@Znackattack -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03 -
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
Error encountered while polling the resource for the service endpoint
Hello everyone
I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
I created a new OSB project, create a new Proxy service to connect to my FTP server:
- service type: messaging service
- request message type: Text, response message type: None
- FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
- Message flow: Start node -> pipeline pairs
in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
<Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
ag
a
glakjgk
>
<Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
*javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
Truncated. see log file for complete stacktrace
>
<Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
Truncated. see log file for complete stacktrace
>
...There are many BEA-381602 errors that occur continuously.
My question is how to solve this problem.
Any suggestion is appreciated.
Thank in advance.
Regards, CuongPT
Edited by: Doubt_Man on Jun 6, 2011 11:17 AMThank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.
-
Following error occurred while executing the application:
I saw the RWB in message monitoring. Message monitoring is not working.
I capture the scrpit.
How can I ? Help me.....
Stack trace for the above error message is:
javax.servlet.ServletException: Error while executing the compilation process: [D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1446: cannot resolve symbol
symbol : method getMaxMessageNumber ()
location: class com.sap.aii.mdt.util.WebUtil
jspxth_hbj_listBoxItem_7.setValue(Integer.toString(webUtil.getMaxMessageNumber()));
^
D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1466: cannot resolve symbol
symbol : method getMaxMessageNumber ()
location: class com.sap.aii.mdt.util.WebUtil
if (max == webUtil.getMaxMessageNumber()) {
^
2 errors
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:74)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1177408659453._jspService(jsp_FC_Secure1177408659453.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Hi,
From what i can tell youre problem is an a java function (user defined?) getMaxMessageNumber and more specific with a conversion from int to string.
Hope this helps
Dimitris Hagigeorgiou -
The sql error:25153 while executing the ListCube
Hi All,
I have loaded data successfully in to my cube it is showing success in RSMO, but while executing the list cube of fieldselection for output with char' it is giving error like " sql error:25153 "
. But when i chose only key figures it is showing the data. What could be the problem .Please reply needs urgently.
Thanks one & All in advance.If your underlying RDBMS for BW is Oracle, this error message number is thrown for when an attempt is being made to use space in a temporary tablespace that has no datafiles defined. This could be that there truly are no datafiles defined or it could be that the default temporary tablespace isn't set to a valid temporary tablespace.
You will need to have access to your RDBMS in order to resolve this yourself. If not, then have your DBA or Basis person resolve it -
Receiving SQL Error: INTERNAL_ERROR while executing the query
Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi YOSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers. -
Error encountered while collecting the data from JMS topic bus
Iam encountering a problem while collecting the data from JMS topic bus and pushing the data to BAM.On the DesignStudio window, after I click on “update” button in the plan window to run the plan I get the following exception messages:
IMessageSourceReceiver->messageReceive:
javax.naming.CommunicationException: Connection refused: connect
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
at
com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at
iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerS
tart(JMSMessageSourceReceiverImpl.java:1001)
at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageRecei
ve(JMSMessageSourceReceiverImpl.java:326)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:426)
at java.net.Socket.connect(Socket.java:376)
at java.net.Socket.<init>(Socket.java:291)
at java.net.Socket.<init>(Socket.java:147)
at
com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnecti
on.java:682)
at
oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSoc
ketRmiTransport.java:58)
at
oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java
:78)
at
oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTr
ansport.java:68)
at
com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.ja
va:646)
at
com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientCon
nection.java:190)
at
com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.jav
a:174)
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
... 5 more
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]The error msg says that your BAM server cannot connect to your JMS provider. Make sure your configs are all ok, in EL DesignStudio, BAMArchitect EMSdefinition, etc. You can refer to the samples and technotes and tutorials to understand these details. If you are following the steps in the technote etc. pl verify your oc4j container is running, and oc4j version and 'jndi path' is ok. Give the doc name, pg number and step where you are getting this error.
-
Error Message while executing the Application
Hi,
I am new to Webdynpro and I created my first application by following some blog on a portal.I was able to activate my application successfully and when I executed I get this below error message.
I checked the cardinality and it is 0..1.My Inti.Lead Selection is set to NO.
I mappedthe nodes in my views also. But still i don't know whay am getting this error.
Note
The following error text was processed in the system RS2 : Adapter error in &VIEW_ELEMENT_TYPE& "VBELN" of view "Z_MYFIRST_WEBDYNPRO.MAIN": Context binding of property VALUE cannot be resolved: Node MAIN.1.NODE_VBAK does not contain any elements
The error occurred on the application server ucerp18_RS2_00 and in the work process 11 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Thanks
KiranHi,
I changed the cardinality to 1:1 and I can see the selection screen. But, can you please explain why I should change this from 0:1 to 1:1.
Now I have a new error:
After I enter the sales order Number and hit my FIND button, am getting this error:
The following error text was processed in the system RS2 : Could not find attribute VBELN
Thanks,
Kiran
Now am getting a different error:
Invalid operand type for the MOVE-CORRESPONDING statement
Thanks
Kiran
Edited by: kiran dasari on Aug 20, 2009 10:54 PM -
Error coming while executing the query in analyzer
HI,
Any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
maheshHi ,
It happens because of the improper connectivity and configuration.In case of Web Reports so many pop ups will appear because of improper config..As long as you are getting the reports its ok,,,Should be taken care of Basis
Regards
Siva -
How to debug a run time error encountered while executing ZFunction Module
Hi all,
My requirement is to create a ZFunction Module that Generated a sales order
for multiple line items and works for both Variant Configurable material and a Normal Material.
I am using BAPI_SLSTRANSACT_CREATEMULTI in my Zfunction Module to create a
Sales order
My ZFunction Module works well if I give normal material as input.
It also works well and generates a sales order if I give all Variant Configurable materials as input.
But if I give both Variant Configurable material and a normal material it throws a run time error.
Can some one tell me what is wrong? can some one suggest me how to debug this run time error
Termination occurred in the ABAP program "SAPLCRM_CONFIG_OW" - in
"CONFIG_TO_CBASE".
The main program was "RS_TESTFRAME_CALL ".
In the source code you have the termination point in line 63
of the (Include) program "LCRM_CONFIG_OWF02".
Source Code Extract
Line SourceCde
| 33| LT_CUXI_CUPRT
| 34| LT_CUXI_CUVAL
| 35| LT_CUXI_CUVK
| 36| LS_CUXI_CUCFG.
37
| 38| PERFORM CREATE_PRICING_CSTIC USING IS_CONFIG-CUCFG-CFGINFO.
39
| 40|* set config to cbase
| 41| CALL FUNCTION 'COM_CUXI_SET_SINGLE_CFG'
| 42| EXPORTING
| 43| I_CFG_HEADER = LS_CUXI_CUCFG
| 44| I_ROOT_INSTANCE = CV_INT_OBJ_NO
| 45| I_LOGSYS = LV_LOGSYS
| 46| IMPORTING
| 47| E_ROOT_INSTANCE = CV_INT_OBJ_NO
| 48| TABLES
| 49| I_TAB_INSTANCES = LT_CUXI_CUINS
| 50| I_TAB_PART_OF = LT_CUXI_CUPRT
| 51| I_TAB_VALUES = LT_CUXI_CUVAL
| 52| I_TAB_VAR_KEYS = LT_CUXI_CUVK
| 53| I_TAB_RESTRICTIONS = LT_CUXI_CURES
| 54| EXCEPTIONS
| 55| INVALID_INSTANCE = 1
| 56| INTERNAL_ERROR = 2
57
OTHERS = 3. 58
| 59| IF SY-SUBRC <> 0.
| 60| if sy-msgno is initial.
| 61| MESSAGE X010 WITH 'COM_CUXI_SET_SINGLE_CFG'.
| 62| else.
|>>>>>| MESSAGE ID SY-MSGID TYPE 'X' NUMBER SY-MSGNO
| 64| WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
| 65| endif.
| 66| ENDIF.
67
| 68|ENDFORM. " CONFIG_TO_CBASEHey Amit...
Can I Create a Sales order for VC and Non VC items using BAPI_SLSTRANSACT_CREATEMULTI
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI
I am trying to create a Sales Order using a Zprogram. I have used BAPI_SLSTRANSACT_CREATEMULTI. If I give the input as Normal material I am able to generate a sale order. If I give the input as VC material I am able to generate a sales order. But if I give both VC and Normal material as input, I get a run time error as follows.
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI that we cannot create a sales order with both VC and Non-VC items or am I missing some data which I need to pass when I give both VC and Non VC items? I get this error only for my Zprogram. But if I try to create an order on screen manually I donu2019t get any error. This happens only if I create an order with my Zprogram.
Some one please help me u2026I am just stuggling to get this doneu2026
I dint find any posts that gives me information about this error.
CUX1 034 u201CNo root instance found in header datau201D
In the source code you have the termination point in line 63 of the (Include) program "LCRM_CONFIG_OWF02". -
Error Encounterd while executing the Custom java file
Hi,
I have created a Custom Java file namely TestClient.java,if I try to run this file I get the following error:-
java.lang.NoSuchMethodError: oracle.xml.parser.v2.SAXParser.setContentHandler(Lorg/xml/sax/ContentHandler;)V at oracle.jdeveloper.cm.DefaultConnectionStore.read(DefaultConnectionStore.java:182) at oracle.jdeveloper.cm.ConnectionManager.loadConnectionDescriptors(ConnectionManager.java:1223) at oracle.jdeveloper.cm.ConnectionManager.getConnectionDescriptorImpl(ConnectionManager.java:1203) at oracle.jdeveloper.cm.ConnectionManager.putConnectionDescriptor(ConnectionManager.java:336) at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1029) at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:262) at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:350) at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272) at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473) at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1286) at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1264) at Package6Module.TestClient.main(TestClient.java:20)
Any Idea?Where am I going wrong ?The code that I have wriiten is as below :
package package6.Package6Module;
import oracle.jbo.*;
import oracle.jbo.domain.Number;
import oracle.jbo.client.Configuration;
public class TestClient
public TestClient()
public static void main(String[] args)
String _cf = "Package6ModuleLocal"; // Configuration Name
String _am = "package6.Package6Module.Package6Module"; // Application Module Name
// Create an instance of the appmodule by name, using Local mode
ApplicationModule am_Ord = Configuration.createRootApplicationModule(_am,_cf);
// Find the "CustomerView" view object by name in the app module
ViewObject vo_Dept = am_Ord.findViewObject("GecmRpScheduleLinesTestView");
System.out.println("AM_Module :"+am_Ord);
}BI Publisher
Maybe you are looking for
-
How to get the last element of a structure in a textfield in DesignStudio
Hello, how can I get the last element of a structure within a bex query? Within the structure we are working with dates that dynamically are buiId (input date - offsets for several months). I have to show the last value in a single textfield within D
-
Neither of my ipod touches will synch
I have 2 ipod touches That will no longer sync with itunes. I uninstalled, and reinstalled itunes. I am using Windows 7.
-
I can't find the Firefox bookmarks file on my Mac. Have looked in Application Support/Firefox/Profiles/[the only one.default].I should be looking in the correct spot, as described above. Firefox for Mac has no facility to "export" the bookmarks eithe
-
I delete iPhoto from my mac how can i reinstall it?
i cant seem to reinstall iphoto onto my mac help!
-
Control Document Posting for value range
Hi All, I have requirment in which if a user tries to post a doument via T Codes ( FB01, FB50, FB60, FB70, FBV2 and a custom program which would use BAPI / BDC) and if the total amount of the document ie >999 $, the document should not get posted ins