Error encountered while loading data into an Essbase cube from oracle DB

Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
Priya

The error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Unexpected Essbase error 1090004 while loading data into EssBase

Hi Friends,
am tring to load data into Essbase the following error am getting..
"Unable To Open File [C:\WINDOWS\TEMP\tempfile6051912_1.txt]
Unexpected Essbase error 1090004"
but there is no such file("tempfile6051912_1.txt") in that file path
Can anybody help inthis..
Thanks in Advance...
Edited by: Rakesh on Jul 24, 2012 6:03 PM
Edited by: Rakesh on Jul 24, 2012 6:04 PM

Hi sukhi...
Am loading data with out selecting any rule file as it's the data file which is extracted from Prod envirement and loading into QA.
I have followed your procedure as i kept data file in (E:\Hyperion\products\Essbase\eas) ,because there no analyticalservices folder as we are using 11.1.1.3 version of hyperion.
still am getting the following error"Unable To Open File [C:\WINDOWS\TEMP\tempfile605252012.txt]
Unexpected Essbase error 1090004"
Thanks for your answer and can u help me in this.......

Error while loading data on to the cube : Incompatible rule file.

Hi,
I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
     at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
Thanks,
Santhosh

" Incompatible rule file. Duplicate member name rule file is used against unique name database."
I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that.

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading data into clob data type.

Hi,
I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
Let me know if anyone come across and resolved this kind of issue.
Thanks much,
Nishit Gajjar

Mr. Gajjar,
You didnt mention what KMs you are using ?
have a read of
Re: Facing issues while using BLOB
and
Load BLOB column in Oracle to Image column in MS SQL Server
Try again.
And can you please mark the Correct/Helpful points to the answers too.
Edited by: actdi on Jan 10, 2012 10:45 AM

"JavaScript Error encountered while loading HTML"

Hi,
I have been trying to embed a google map on a InDesign CC page, NO LUCK YET.
I spoke several Adobe InDesign help line people, unfortunately they couldn't solve it.
Here is the problem: I tried with different versions
1- version) I copy of a map code and paste the code on a page, shows grey square round image and nothing (no map)
2- version) From Object menu:
    "Select insert HTML.."
    "This is an HTML snippet."
I paste the codes into HTML box, a second later, small box message,
     "JavaScript Error encountered while loading HTML"
I have 64bit 12gb ram computer with windows 8.1
InDesign CC version 9.2.1 x64
Java 7 update 51
I have tried with Internet explorer, google chrome and fire fox, and different maps, still no luck.
Can anyone solve this problem?
Thank you in advance,
atamtan

Yes, Google changed something and not for the better.
Try a bing map instead. They work fine.

Issue while loading data to sample essbase app using odi

while executing data load the error is
Now, while loading data to an essbase app i am getting the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:23)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)

Hi,
It means in your options of the KM you have it set to quit when it hits one error, if you set it to 0 (infinite) then it will not stop no matter how many data load errors it hits.
If you set it to 0 and run the interface, depending on how you set up the options in the KM it can write to two log files, which you should check.
Cheers
John
http://john-goodwin.blogspot.com/

A Critical error encountered while loading webpage.

Was running 2.1.51 and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
A Critical error encountered while loading webpage.
Reboot router - log back in - can go anywhere except the status page -- get same error page
made the mistake of downloading and upgrading firmware to 2.1.71   = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
A Critical error encountered while loading webpage.
the url is https://192.168.75.1/scgi-bin/platform.cgi   but it doesn't load only displays the error.
could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
thanks.

Thanks for the response.   Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box. Luckily I had a backup of the config so it wasn't too painful to restore.
I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired... I had successfully logged in without issue and was able to view the status tab only a week earlier.
be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned...

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Error while loading Data into Essbase using ODI

Hi,
I am very new to ODI. I have installed ODI and working on Demo environment only. I havn't done any configuration. I am using Essbase Technology which is coming by default.
I have created one sample outline in Essbase and a text file to load data into essbase using ODI.
Following my text file.
Time     Market     Product     Scenario     Measures     Data
Jan     USA     Pepsi     Actual     Sales     222
I am getting the error. I have checked in Operator. It is giving at step 6 i.e. Integration SampleLoad data into essbase.
Here is the description.
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C3_C1 ""Time"",C5_C2 ""Market"",C2_C3 ""product"",C6_C4 ""Scenario"",C1_C5 ""Measures"",C4_C6 ""Data"" from "C$_0Demo_Demo_genData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
Please help me to proceed further...

Hi John,
Here is the error message in execution tab....
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 20, in ?
java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
     at org.hsqldb.jdbc.jdbcStatement.fetchResult(jdbcStatement.java:1598)
     at org.hsqldb.jdbc.jdbcStatement.executeQuery(jdbcStatement.java:194)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx4.f$0(<string>:20)
     at org.python.pycode._pyx4.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
java.sql.SQLException: java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Error while load data into Essbase using ODI

Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
Venu

Are you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/

Error while loading data into 0pur_c03 using 2lis_02_scl

Hi,
While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
Regards,
Hari Prasad B.

I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
Regards

Error while loading data into ODS

Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
The error message in the monitor is as follows
"Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
have anybody encountered this.
Thanks
Arun

Thanks Marc,
we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row) for our CRM system is missing which has this port as a field in this table.
Not sure whether to manually populate it or it's part of the source system repair etc.
please let me know
Thanks
Arunava

Error while loading data into hierarchy

Hi,
I tried loading the master data from flat file into a hierarchy but its giving me an error message as invalid entry and says hierarchy doesn't exist.Could anyone please guide me how to proceed.
Thanks,
Kuldeep.

Hi,
1. create a hierarchy, go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc.
2. Assuming it is a flat file load in csv format,selct upload method as IDOC,after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab
This will hopefully solve your problem.
Kind Regards,
Ray

Error encountered while loading data into an Essbase cube from oracle DB

Similar Messages

Maybe you are looking for