Error : Enter a valid delivering plant

Hi i have a below error, can u pls suggest.
Enter a valid delivering plant
Message no. V1 755
Diagnosis
The customer for the delivering plant is the same as the sold-to party.
System Response
The system cannot determine a valid delivering plant.
Procedure
Check if a delivering plant has been entered in the customer master, material master, or in the customer-info record, with identical customer and sold-to party.
Regards
Nawzir

You can maintain Plant in Sales Order at Header or / and Item level on Shipping tab page. You can go to shipping tab page for item level bt double-clicking on line item & then go to shipping tab page.
Alternatively maintain plant in master data as undere:
Customer-Material Info
Customer Master data
Material Master data
Regards,
Rajesh Banka
Reward points if helpful

Similar Messages

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

NOT VALID DELIVERING PLANT

Hi,
When i am entering the PLANT while trying to create a sales order, using the same customer for SP and SH,system is giving a message that delivering plant is not valid and the customer for the delivering plant is the same as the SOLD TO PARTY.But while creating customer master I ve assigned this plant as the delivering plant
plz help to solve
thanks,
smita

Hi,
Just to elaborate a bit on the neterprise stru assignment
Check the sales area that you are using to create a sales order.
Check if the sales area is assigned properly to the Credit Control area.
Check if the Delivering plant is assigned to the cos code.
Check if the sales org is assigned properly to the Cos code.
Check if the sales org and distribution channel is assigned to the plant.
Check if the Distribution channel is assigned to the sales org
Check if the Division is assigned to the sales org
Then create the material for the sales area and plant. or extend it for that plant by using MM50.
Lastly create a customer in the cos code and for the specific sales area.
If you do each step systematically then you wont face any probs.
Edited by: Christino Ronaldo on Aug 6, 2008 11:38 AM

INSOCREATE - Error: Enter a valid lock category

Hi
I am trying to create Inurance object thru INSOCREATE and it is throwing error like below:
"Enter a valid lock category"
This is the long text:
Enter a valid lock category
Message no. >0426
Diagnosis
Either the value for the lock type does not exist in the Customizing table TFK080B or the value belongs to another application.
please help on this.
regards
Giri

fixed the first couple issues.
/etc/fstab didn't have "exec" for the cdrom, not sure what that was about; prob just user error; heh
I also went into /usr/X11R6/bin and created a sym link for xdpyinfo to where it really exists:
[root@marsrv1 bin]# ln -s /usr/bin/xdpyinfo xdpyinfo
that enabled the gui install to come up just fine and the rest of the install went just fine.

FV50-- Editing Option Error "Enter a valid value" Message 00002

Hello FI experts,
An user is trying to execute a tcode FV50 and clicking "Editing Options" to make changes to "Doc.Type option" from "Document type hidden" to "Enter with short name" under " Special functions for single screen transactions" section.
When the user clicks SAVE button in "Accounting Editing options" screen, user is getting the the error message "Enter a valid value".
Can anyone tell me how to change this option and resolve this error?
There are users they are successfully able to change it and I am even able to change the document type options without encountering this error.
Any help on this is much appreciated!
Thanks,
Himadama

Dianne,
Thank you for your prompt response.
The user has done modifications in FB00 but issue is still there.
Could you elaborate more on what has to be done in this FB00 tcode?
Thanks much.
Thanks,
Himadama

WebADI Journal Fails to Upload due to Error ''Enter A Valid Ledger''

We are in 12.1.3 version.
I tried to create a document from "AAA" GL module, but the DATA ACCESS SET name populated as "BBB" ledger name.
So, I managed to change it by manually with "AAA" ledger name and then tried, journal upload fails and showing error as "enter a valid ledger".
Can any expert advice me, how to get the "AAA" ledger name should automatically populate, while trying to create a (webadi) document ?
Thanks in advance.

Hi,
Please check the Data Access Set, profile option set for the responsibility you are using to create the document.
Also, If you want only 'AAA' to appear always, you can update the Web ADI template that you are using and make the Ledger field as constant to 'AAA'.

Error: Enter a valid Production Version

Dear Gurus
I have a problem while production booking of a vehicle. It says Enter a valid production version. I have checked the version in Material master-->MRP4 view. The version is maintained there. What else whould i check ?
Pls Help
REGARDS

Dear Gaurav,
As this is Repetitive Manufacturing then , you should maintain the Product cost collector also. Please do maintain this & then try.
When u enter the group no of routing & also the alternat BOM & click on check at the top of the screen, When you click on check button then, the signals will turn to green if you have used the valid BOM & Routing group no.. If you get green in this screen then, there is no problem with Production Version.
Please do let me know for any clarifications.
Regards
Kalyan

MSA - creating/changing activity for bp error : enter a valid value for bp

Hello experts,
while using msa with activites, on one client for one bp
I cannot create/change an activity: error:
insert a valid value for bp
This happens only for one bp on this client,
on other clients this bp works fine.
When I look in old activites for this bp, there in activity -> detail
the field bp (hyper link) is not filled.
I think there is a problem with the incorrect bp, but in which tables
can search for this ?
Best regards
Gerd

Hi,
I assume that the BP is present in table smokna1 but not available in smokna1sht (anymore).
When creating an activity the BP selection is based on smokna1, but the field/property validation is based on smokna1sht (see error message).
But unfortunately I don't have any idea for now how to download this particular record to this site...
Regards,
Wolfhard

Intercompany Billing and Delivering Plant

Hi,
I had selected a delivering plant for my intercompany billing, that was different from the one previously assigned to my sales organisation and company code. However, even after cancelling those assignments, I still cannot use my original plant to process sales orders.
I keep getting the error message" enter a valid delivering plant"
Could you tell me how to resolve this issue and oblige?
Regards,
Aditya

Hi,
check whther the assignemnt for intecompany settings. The Delivering plant should be asigned to the ordering Sales org and distribution channel combination.
Prasanth

Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
Chandu

Hi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri

SAP Note 144253 For error Enter valid delivery plant in sales order

Hi all,
I am getting the error "Enter valid delivery plant" while creating the sales order . This is due to Customer and plant are same .
For that I got one SAP Note 144253.
If anyone implimented this SAP note Could you please share is there any impact of this note after implimenting.
Thanks
CM

Hi,
Go to bellow links,
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap-basis-abap.com/bc/steps-to-install-sap-note.htm
Thanks,
Raviteja

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Error messege in Background Job(SM37) - Please enter a valid date

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,Because this datein the past

Error : Enter a valid delivering plant

Similar Messages

Maybe you are looking for