Error: Enter a valid Production Version

Dear Gurus
I have a problem while production booking of a vehicle. It says Enter a valid production version. I have checked the version in Material master-->MRP4 view. The version is maintained there. What else whould i check ?
Pls Help
REGARDS

Dear Gaurav,
As this is Repetitive Manufacturing then , you should maintain the Product cost collector also. Please do maintain this & then try.
When u enter the group no of routing & also the alternat BOM & click on check at the top of the screen, When you click on check button then, the signals will turn to green if you have used the valid BOM & Routing group no.. If you get green in this screen then, there is no problem with Production Version.
Please do let me know for any clarifications.
Regards
Kalyan

Similar Messages

Enter a valid product before generating a subsequent item

Hello,
I am creating a complaint from a 3rd party front end . There is an action associated with this process type. Now I am getting an error "Item 1000 Enter a valid product before generating a subsequent item " . The product Id in the item details is correct (as I checked the id with the COMM_PRODUCT table ).
Can you please help?
Thanks,
Neeraj

Hi Balu,
What is the business transaction type u r using and what posting it does. This identifies the necessity for the witholding tax code.
Please specify.
Thx, Ashok

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

WebADI Journal Fails to Upload due to Error ''Enter A Valid Ledger''

We are in 12.1.3 version.
I tried to create a document from "AAA" GL module, but the DATA ACCESS SET name populated as "BBB" ledger name.
So, I managed to change it by manually with "AAA" ledger name and then tried, journal upload fails and showing error as "enter a valid ledger".
Can any expert advice me, how to get the "AAA" ledger name should automatically populate, while trying to create a (webadi) document ?
Thanks in advance.

Hi,
Please check the Data Access Set, profile option set for the responsibility you are using to create the document.
Also, If you want only 'AAA' to appear always, you can update the Web ADI template that you are using and make the Ledger field as constant to 'AAA'.

INSOCREATE - Error: Enter a valid lock category

Hi
I am trying to create Inurance object thru INSOCREATE and it is throwing error like below:
"Enter a valid lock category"
This is the long text:
Enter a valid lock category
Message no. >0426
Diagnosis
Either the value for the lock type does not exist in the Customizing table TFK080B or the value belongs to another application.
please help on this.
regards
Giri

fixed the first couple issues.
/etc/fstab didn't have "exec" for the cdrom, not sure what that was about; prob just user error; heh
I also went into /usr/X11R6/bin and created a sym link for xdpyinfo to where it really exists:
[root@marsrv1 bin]# ln -s /usr/bin/xdpyinfo xdpyinfo
that enabled the gui install to come up just fine and the rest of the install went just fine.

Error : Enter a valid delivering plant

Hi i have a below error, can u pls suggest.
Enter a valid delivering plant
Message no. V1 755
Diagnosis
The customer for the delivering plant is the same as the sold-to party.
System Response
The system cannot determine a valid delivering plant.
Procedure
Check if a delivering plant has been entered in the customer master, material master, or in the customer-info record, with identical customer and sold-to party.
Regards
Nawzir

You can maintain Plant in Sales Order at Header or / and Item level on Shipping tab page. You can go to shipping tab page for item level bt double-clicking on line item & then go to shipping tab page.
Alternatively maintain plant in master data as undere:
Customer-Material Info
Customer Master data
Material Master data
Regards,
Rajesh Banka
Reward points if helpful

FV50-- Editing Option Error "Enter a valid value" Message 00002

Hello FI experts,
An user is trying to execute a tcode FV50 and clicking "Editing Options" to make changes to "Doc.Type option" from "Document type hidden" to "Enter with short name" under " Special functions for single screen transactions" section.
When the user clicks SAVE button in "Accounting Editing options" screen, user is getting the the error message "Enter a valid value".
Can anyone tell me how to change this option and resolve this error?
There are users they are successfully able to change it and I am even able to change the document type options without encountering this error.
Any help on this is much appreciated!
Thanks,
Himadama

Dianne,
Thank you for your prompt response.
The user has done modifications in FB00 but issue is still there.
Could you elaborate more on what has to be done in this FB00 tcode?
Thanks much.
Thanks,
Himadama

BDC Error in transaction C223 - production version mass maintenance

Hi Experts,
         I have created a BDC recording for Tcode - C223. In my case for each plant and material there is a production version. if production version already exists, then we have to modify the record, if no record already exists, then we have to create and have to press save. When i was recording the transaction, i have changed the existing record and pressed saved, it has given the message record saved successfully.
          But in BDC when i was running the same recording, it says function code not possible. I was giving my code, please let me know how to solve the issue.
PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTE'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL-WERKS'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTE'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL_EXPAND-PRVBE(01)'.
    PERFORM bdc_field       USING 'MKAL_EXPAND-MATNR(01)'
                                  wa_record-matnr.
    PERFORM bdc_field       USING 'MKAL_EXPAND-VERID(01)'
                                  c_verid.
    PERFORM bdc_field       USING 'MKAL_EXPAND-TEXT1(01)'
                                  wa_record-text1.
    DATA l_adatu2(10) TYPE c.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal = l_adatu
      IMPORTING
        date_external = l_adatu2.
    IF sy-subrc <> 0.
    ENDIF.
    IF l_adatu IS INITIAL.
      PERFORM bdc_field       USING 'MKAL_EXPAND-ADATU(01)'
                                    sy-datum.
    ELSE .
      PERFORM bdc_field USING 'MKAL_EXPAND-ADATU(01)'
                                  l_adatu2.
    ENDIF.
    PERFORM bdc_field       USING 'MKAL_EXPAND-BDATU(01)'
                                  c_date1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-STLAL(01)'
                                  c_1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-STLAN(01)'
                                  c_1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PLNNR(01)'
                                  wa_record-plnnr.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ALNAL(01)'
                                  wa_record-alnal.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PLNTY(01)'
                                  wa_record-plnty.
    PERFORM bdc_field       USING 'MKAL_EXPAND-SERKZ(01)'
                                  c_x.
    PERFORM bdc_field       USING 'MKAL_EXPAND-MDV01(01)'
                                  wa_record-mdv01.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ALORT(01)'
                                  wa_record-alort.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ELPRO(01)'
                                  wa_record-elpro.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PRVBE(01)'
                                  wa_record-prvbe.
    PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL-WERKS'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    CALL TRANSACTION 'C223' USING it_bdcdata
                                  MODE 'A'
                                  UPDATE 'A'
                       MESSAGES INTO tmess_mtab.
my record was like this
1038        37581     MG CY/CC WINTER HB ENTREE   1       50084122     2     N     M100     0200     0200     SA02
Thanks & Regards,
Poorna.
Edited by: poorna on May 10, 2009 4:52 PM

Thanks

MSA - creating/changing activity for bp error : enter a valid value for bp

Hello experts,
while using msa with activites, on one client for one bp
I cannot create/change an activity: error:
insert a valid value for bp
This happens only for one bp on this client,
on other clients this bp works fine.
When I look in old activites for this bp, there in activity -> detail
the field bp (hyper link) is not filled.
I think there is a problem with the incorrect bp, but in which tables
can search for this ?
Best regards
Gerd

Hi,
I assume that the BP is present in table smokna1 but not available in smokna1sht (anymore).
When creating an activity the BP selection is based on smokna1, but the field/property validation is based on smokna1sht (see error message).
But unfortunately I don't have any idea for now how to download this particular record to this site...
Regards,
Wolfhard

Error While Starting JDEV (production version 10.1.2)

I get the following error while starting jdev.
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/DTD
at oracle.ide.marshal.xml.Object2Dom.<init>(Object2Dom.java:1625)
at oracle.ide.marshal.xml.Object2Dom.newInstance(Object2Dom.java:118)
at oracle.ide.config.IdeSettings.load(IdeSettings.java:250)
at oracle.ide.IdeCore.loadIdeSettings(IdeCore.java:1510)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1036)
at oracle.ide.Ide.startup(Ide.java:539)
at oracle.jdeveloper.JDeveloper.launch(JDeveloper.java:58)
at oracle.jdeveloper.JDeveloper.main(JDeveloper.java:37)
Any idea?
Raghu

Here is what I'm getting though:
java.lang.NullPointerException
at oracle.ide.addin.AddinConfig.isEmpty(AddinConfig.java:239)
at oracle.ide.AddinManager.exclusiveExtension(AddinManager.java:1317)
at oracle.ide.AddinManager.initProductAndUserAddins(AddinManager.java:43
1)
at oracle.ide.IdeCore.initProductAndUserAddins(IdeCore.java:1650)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1109)
at oracle.ide.Ide.startup(Ide.java:539)
at oracle.jdeveloper.JDeveloper.launch(JDeveloper.java:58)
at oracle.jdeveloper.JDeveloper.main(JDeveloper.java:37)
-Brian

How to customize production version error message

Hi Friends,
I copied the BAPI_REPMANCONF1_CREATE_MTS into Z FM and when I test the Z FM, I wantedly entered the wrong production version say ABCD instead of 1234. The message field of my return bapi BAPIRET2 is populated with an error message saying that "Production version not found". Till here it is working fine.
I need to modify my code in such a way that if I enter the wrong production version, my bapi should error me in such a way that "ABCD Production version not found" in the message field of BAPIRET2.
Please sugesst me ideas for solving this.
Thanks.

Nani,
Please follow approach suggested by Suman.
All you have to do is validate production version ( of that material/product?) against DB Tables before calling you ZFM or Std BAPI.
If you would like to go by my approach.. you will have to do something like this..
option1:
IF RETURN-TYPE = 'E' AND RETURN-ID EQ 'RM' AND RETURN-MESSAGE = '149'.
CONCATENAT 'XXXX' RETURN-MESSAGE INTO RETURN-MESSAGE.
ENDIF.
Option2: Create a Z class.
IF RETURN-TYPE = 'E' AND RETURN-ID EQ 'RM' AND RETURN-MESSAGE = '149'.
RETURN-ID = 'ZID'.
RETURN-NUMBER = 'XXX' -> Number in Z class.
RETURN-MESSAGE = 'your message'.
ENDIF.

Error message - KD199 Enter a valid value when Closing the Project at CJ20N

Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
Chandu

Hi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri

Production version problem

Hi friends
when i have created production version for one material i got the error. pleas efind the error below.
inconsistencies for production version.
when i checked the production version for that material systm shows the green light for bom and red light for routing. but system shows bom exists and task list exists. onle problem is inconsistencies for production version.
please help me any missing from my side
Thanks
venkat

Hi
1. Check the valid from date for Routing and the Valid from date that you entered in the production version ( MM02/ MRP4 VIEW ) is same
The vaild from date should be same for Routing and the PV valid from date (Mentioned in PV BASIC DATA)
Suppose the valid start date of the Routing is later than tha Date that you given in the production version basic date, then the inconsistence error will come . it give the red light to Routing
ie.
Routing valid from date : 06..06.2009
PV vaild from date : 01.06.2009
So for the date 01.06.2009 - 05.06.2009 , ysytem say that no Routing exist.inconsistence in pv.

Why does Acrobat installation on new PC not accept valid product number?

I bought Acrobat 8 in 2011 and have a valid product number. I just bought a new PC with Windows 8. I downloaded Acrobat 5 from the Adobe website. When it asked for the product ID, I put in the number, and got a response that the number is invalid. I copied the number directly from the purchase record on Adobe.
What is the problem? How can I correct it?

is there a typo in you message?
you state you have acrobat 8 and downloaded acrobat 5.
both should be version 8? if so, http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

Selecting production version in MRP run

Hi dudes,
our client is having reuirement is he will select the production version irrespective of lot size, but he select the production version at the time of manual creation of process order where it depends on resource(work center used in recipe of particular production version, BOM will be 1 alternative only.
now while running MRP how to make system to allow manual selection of production version at the time of converting planned order to processs order.
respond asap plz...
Daniel.

Hi ,
During MRP, system will select the production version based on Validity date & Lot size.
If a material contains two production versions with same validity date & Lot size qty , system will select the First valid PV by default (unless it is locked) & will copy to planned order.
When u convert the planned order to production order,default PV will be copied automatically from planned order. Here u cannot select PV manually.
Settings:
Create valid production version with lot size and Valid routing , BOM at MRP view of Planning material.
Assign the selection method = 2 or 3 at MRP view of Planning Material
Regards,
Anand.

Error: Enter a valid Production Version

Similar Messages

Maybe you are looking for