Error : Entry 4 not in table EMSEG (system error) in MIGO
Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholi
you can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.
Similar Messages
-
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
IDOC Error - Entry in outbound table not found - Status 37
Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
MichaelHi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika -
BBP_MON_SC: System Error: SC not in Table GT_LIST_HEADER
Hello,
We are in SRM -Ext Classic.
When i go to BBP_MON_SC: and look for a SC - yes i can find it .
Once i am in...
If i click on any of the tabs: Display SC.Item overview, messsages etc.,
I get a error message...
System Error: SC not in Table GT_LIST_HEADER
Any suggestions please?
regards
SriniHello
Is it happening for all SCs? Did you checked the status of shooping cart in BBP_PD?
Regards
Kiran -
Can not upgrade. "unexpected system error" [SOLVED]
I seem to have trouble upgrading and synchronizing the databases. I get this output when attempting 'pacman -Syu' and 'pacman -Syy':
:: Synchronizing package databases...
error: failed to update testing (unexpected system error)-----------------] 0%
error: failed to update core (unexpected system error)--------------------] 0%
error: failed to update extra (unexpected system error)-------------------] 0%
error: failed to update community (unexpected system error)---------------] 0%
archlinuxfr 25.0K 60.7K/s 00:00:00 [#####################] 100%
compiz-fusion 3.6K 26.0K/s 00:00:00 [#####################] 100%
I have tried searching for a solution here but it seems that no one else is experiencing this issue (unless I over looked a post). I see nothing about this in the news section of the home page so it might not be a common issue.
This is what my pacman.conf file looks like:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
[testing]
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
[compiz-fusion]
Server = http://compiz.dreamz-box.de/i686
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Is there a log file I can check to see what happened exactly or is there something that can be done for me to sync the databases again. Any help is appreciated.
Last edited by vytalelementz (2008-10-13 13:45:48)Here is my mirrorlist:
# Arch Linux repository mirrorlist
# North America
# - United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = http://archlinux.unixheads.org/$repo/os/i686
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
Server = http://mirror.rit.edu/archlinux/$repo/os/i686
Server = http://mirror.umoss.org/archlinux/$repo/os/i686
Server = http://schlunix.org/archlinux/$repo/os/i686
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
Server = http://mir.archlinux.fr/$repo/os/i686
Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
# - Germany
Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Norway
Server = http://arch.likbilen.com/$repo/os/@carch
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
Server = ftp://hell.org.ua/archlinux/$repo/os/i686
Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686 -
Error reading table TOBJ - System Error when accessing Analysis of Change Requests
Hi Experts,
When I am trying to access Status Report or Processing time I get the following errors:
Error reading Table TOBJ - system error, An error occurred when getting data from the
processor and Log not found (in main memory).
I am not sure how this table gets populated or how to check for inconsistencies.
We have already checked the patch levels and they are on the same level for all environments.
We never had these errors in our Dev and Qa environments. We recently got a new TREX environment, could that be causing any of these errors.
Any ideas how to troubleshoot this problem?
Thanks
RiaanFor info. The problem was revolved with 2 notes.
1668882 and then apply the NWBC runtime 1963267. -
I am currently virtualising W.I.C.S Nationwide with APP V 5.0 SP1 on a Windows 64BIT machine. When I install and launch the application manually I am able to log into the application successfully without issues.
When I sequence the application, I get nothing in the report to suggest any issues. in fact the report has nothing. After sequencing, when testing the application on a client machine (Which is a mirror copy of the sequencing machine), once I put in the log
in credentials and try to connect with the application, I get the below error message:
Error Connecting - 2147467259 :Specified driver could not be loaded due system error 998:Invalid access to memory location. (Oracle in Installclient11_1,C:\ProgramData\App-V\86B33AE4-890E-4E98-AD4F-C4F7A1FCA0DE\4D075A01-3775-4BEA-BEC4-5414B3B0D02E\Root\instantclient_11_1\sqora32.dll).
I was wondering if anyone has had this issue with a similar application that tries to load an ODBC driver and if so how did you resolve it
UObiWhen Sequencing did you try to go into ODBC and test the connection? Is that file in that location? If you run a ProcMon, what results does that produce in relation to the sqora32.dll?
Out of interest, have you tried sequencing on a 32-bit machine? I haven't had an issue yet but am wondering if it's a 32-bit driver running on 64-bit and not running correctly for some reason, either way, a ProcMon may give you some clues. Sorry, can't be
much help
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon -
Error during encryption or decryption. System error code 997.
Hello,
I am trying to reconnect to a farmafter my PDC crashed and I had to create all the new users, When I run the sharepoint configuration tool and can get as far as entering the DB server which then finds the sharepoint_config. I add the connection details and select next which then throws up the following error:
09/13/2008 13:20:34 8 INF The parameter user is chosen,
so returning the value as IPIC\cdigby
09/13/2008 13:20:34 8 INF Entering function Command.this[string key]
09/13/2008 13:20:34 8 INF Entering function CommandCollectionBase.Get
09/13/2008 13:20:34 8 INF Found value in collection for key password
09/13/2008 13:20:34 8 INF Leaving function CommandCollectionBase.Get
09/13/2008 13:20:34 8 INF Found parameter password in collection
09/13/2008 13:20:34 8 INF Leaving function Command.this[string key]
09/13/2008 13:20:34 8 INF The parameter password is chosen, so returning the value as ***************
09/13/2008 13:20:34 8 INF The parameter password is chosen, so returning the value as ***************
09/13/2008 13:20:34 8 INF Entering function Common.CreateSecureSringFrom
09/13/2008 13:20:34 8 INF Leaving function Common.CreateSecureSringFrom
09/13/2008 13:20:34 8 INF Entering function Farm.IsJoinedToFarm
09/13/2008 13:20:34 8 INF Entering function Farm.TryIsJoinedToFarm
09/13/2008 13:20:34 8 INF My cached Farm object is null, so will load it
09/13/2008 13:20:34 8 INF Calling SPFarm.Local and SPServer.Local to get the local farm objects
09/13/2008 13:20:34 8 INF SPFarm.Local returned null. This usually means that the server is not joined. But, you can delete a server from the configdb without unjoining, which would mean that this machine still thinks it is joined.
09/13/2008 13:20:34 8 INF Trying to access the server farm connection string
09/13/2008 13:20:34 8 INF Entering function TaskCommon.TryGetWssVersion3ConnectionStringExists
09/13/2008 13:20:34 8 INF Entering function RegistryHelper.RegistryHelper
09/13/2008 13:20:34 8 INF The RegistryHelper has the key name as SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\12.0\Secure\ConfigDB and the registry hive as LocalMachine
09/13/2008 13:20:34 8 INF Leaving function RegistryHelper.RegistryHelper
09/13/2008 13:20:34 8 INF WSS v3 registry key SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\12.0\Secure\ConfigDB for the connection string does not exist
09/13/2008 13:20:34 8 INF Unable to get the WSS v3 connection string
09/13/2008 13:20:34 8 INF Leaving function TaskCommon.TryGetWssVersion3ConnectionStringExists
09/13/2008 13:20:34 8 INF DID NOT discover a v3 connection string and SPFarm.Local indicates that this machine is not joined.
09/13/2008 13:20:34 8 INF Entering function Farm.Clear
09/13/2008 13:20:34 8 INF Entering function CentralAdminServiceInstance.Reset
09/13/2008 13:20:34 8 INF Leaving function CentralAdminServiceInstance.Reset
09/13/2008 13:20:34 8 INF Leaving function Farm.Clear
09/13/2008 13:20:34 8 INF Leaving function Farm.TryIsJoinedToFarm
09/13/2008 13:20:34 8 INF Leaving function Farm.IsJoinedToFarm
09/13/2008 13:20:34 8 INF Creating connection string for config db SharePoint_Config server IPIC-SERVER2\SHAREPOINT
09/13/2008 13:20:34 8 INF Creating connection string for admin content db SharePoint_AdminContent_938f78c4-0a10-4a04-b4e0-26a95d7a9022 server IPIC-SERVER2\SHAREPOINT
09/13/2008 13:20:34 8 INF Using NTLM for sql connection string
09/13/2008 13:20:34 8 INF Openning configdb so that I can join it at server IPIC-SERVER2\SHAREPOINT database SharePoint_Config in farm mode
09/13/2008 13:20:34 8 INF Now joining to farm at server IPIC-SERVER2\SHAREPOINT database SharePoint_Config
09/13/2008 13:21:38 8 ERR Task configdb has failed with an unknown exception
09/13/2008 13:21:38 8 ERR Exception: System.ArgumentException: Error during encryption or decryption. System error code 997.
at Microsoft.SharePoint.Administration.SPCredentialManager.DecryptWithMasterKey(Byte[] rgbEncryptedPassphrase)
at Microsoft.SharePoint.Administration.SPEncryptedString.GetSecureStringValue()
at Microsoft.SharePoint.Administration.SPEncryptedString.get_SecureStringValue()
at Microsoft.SharePoint.Administration.SPProcessIdentity.get_SecurePassword()
at Microsoft.SharePoint.Administration.SPApplicationPool.Provision()
at Microsoft.SharePoint.Administration.SPWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
If anyone can help me work around this I would be extremly grateful.
ThanksHi,
I found an article explaining the issue: http://support.microsoft.com/kb/927156.
Please try to disconnect the configuration database from existing farm environment, and then create a new configuration database:
1. Click Start, click Run, type cmd in the Open box, and then click OK.
2. At the command line, change to the following directory: \Program Files\Common Files\Microsoft Shared\web server extensions
\12\BIN
3. At the command prompt, type the following command to create a new configuration database: psconfig -cmd configdb -create -server
ServerName -database ConfigDBName -user Domain\User -password Password
4. Rerun the SharePoint Products and Technologies Wizard.
Hope it helps. -
"DD8x". Error message for loading process:Operating system error !
Using the OLE command I receive the following error:
Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
Operating system error <> !
strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
lsuccess = IDIACommand.CmdExecuteSync(strCommand)
I get the same error with the "DataLoadHdFile" command.
After the error happens, I cannot load any files in the directory until I
reboot DIAdem.Hi punkmonkey,
I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
When you get the same error with
the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
When I attempt to upgrade an app in iTunes for windows, I get an error: "Could not purchase. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later"
I am running the latest iTunes 10.7.0.21 for Windows 7.
This error occurs if I try to either update the app or if I delete it and attempt to redownload.
I have an iPhone and an iPad. I am unable to update the apps or install the apps from within the App Store on iOS.
I do not have an AOL ID, as is a common issue with this type of error.
From what I can tell, my Apple ID account seems fine. I logged in, changed some information, and ensured my credit card is valid and updated.
I can download new apps just fine. I am unable to update or install apps I have purchased in the past.After 30 minutes this morning, no resolution. Then another tech support call this afternoon, 15 minutes in, was escalated to a Tier 2 (Senior) advisor. He said something similar to the above ("this is one of the strangest things I've seen"). He was chatted with iTunes guys and took all my info into the case and was escalating it over to engineering. Said they would be in touch.
So, no solution...yet.
Just to clarify:
iTunes on Windows7: trying to update an existing app, or re-download a prior app, gives the (11111) error. Downloading a new (free) app worked fine.
App Store on iPhone5, iOS 6.0.1: click on UPDATE, switches to INSTALLING...for a second, then switches back to UPDATE. No error message (and nothing in Diagnostic data).
App Store on iPad 3, iOS 6.0.1: same as iPhone 5.
Definitely account related.
I have cleared the store cache, signed out and back in, deleted the credit card data, and re-added, rebooting PC and iPhone...nothing works.
Will post if I hear anything back from Apple. -
IDOC error : Entry in inbound table not found
Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
/XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks.... -
Proxy Error "Could not contact the other system"
Hi
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
ThanksHi Prabhu ,
Hope you are using ABAP client Proxy !!
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
At ECC side :
> Check the Transaction SLDCHECK is working fine
> RFC Destination LCRSAPRFC and SAPSLDAPI is working fine
> Entry is proper at SLDAPICUST Transaction
Please share the message at XI end as well as at ECC end of SXMB_MONI ?
Regards ,
Edited by: Santosh Rawat on Oct 22, 2009 9:55 AM -
Hello, I am having a very hard time attempting to install Office 2010 Pro Plus on a system. The error message that I receive is as follows:
The language of this installation package is not supported by your system.
I have tried running the Microsoft FixIt tool to remove any traces of Office 2007 and Office 2010. Also, I have followed the instructions in
KB928218 to manually uninstall any traces of Office 2007.
I believe the user had both Office 2007 and Office 2010 installed previously. There is no article to remove all traces of Office 2010.
Here is some additional output from the Setup log:
Parsing setup.xml file: F:\Access.en-us\setup.xml
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Showing parent-less message Title: 'Setup Error', Message: 'The language of this installation package is not supported by your system.
I have tried both running setup from a disc and a network share. I am completely stumped and have been trying to get this to load for hours now. Thanks in advance for any advice!Hi,
Thank you for contacting Excel IT Pro Discussions Services.
From your description, I understand that you encountered the following error when trying to install Office 2010:
"The language of this installation package is not supported by your system"
If there is any misunderstanding, please feel free to let me know.
Please check if this blog helps:
http://blogs.technet.com/b/jks/archive/2009/04/23/how-to-fix-the-error-the-language-of-this-installation-package-is-not-supported-by-your-system-during-office-products-installation.aspx
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang -
Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti -
Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.
Maybe you are looking for
-
Please advise on Basis Certification
Hi, I have a question from all the SAP Basis certified consultants, how many hours of study we require per day for passing the exam and how many times we need to go through the manuals. Please feel free to proivde tips of study which could be helpful
-
Format the output file by command spool
Hi, I use sqplus in oracle to output the command output to text file . I use below set environment varialble. SQL> set echo off; SQL> set linesize 3999; SQL> set feedback off; SQL> set feedback off; SQL> set termout off; SQL> set pagesize 0; SQL> spo
-
Sansa Fuze MP3 Compatibility In Tiger vs. Leopard
Greetings! Don't flame me for not going iPod but I have my valid reasons. In any case, I have a Sansa Fuze that refuses to come up on my desktop or in Volumes, though when plugged in it shows up in the System Profiler. I have trawled the Sansa forums
-
Hi I have done a simple program.It shows a JCombobox on a panel.JComboBox contained 3 String (Back,Search,GetaAll).I have addeed a addActionListener(this) to the JComboBox) It works fine at first.When I click Back again and again its going alower and
-
Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. D