Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

Bom dia pessoal.
Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
Entry does not exist in J_1BNFITMRULE (check entry).
Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
Qualquer ajuda será muito bem vinda.
At
Pedro L Nobrega
Pessoal
Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
(Projeto global).... acontece.
Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
Erro corrigido.
Abs
Pedro L Nobrega
Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PM

Resolvido
Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
Grato
Pedro L Nobrega

Similar Messages

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

Entry IN does not exist in T005E - check your entry

Hi,
While creating New plant, the following message appears .
"Entry IN does not exist in T005E - check your entry"
Thanks and regards
Murugesan

hi
Try with OY01, make sure the country for your company code already assign to an ISO code
ISO CODE : IN
ISO CODE 3 Char : IND
OX15 check what COUNTRY CODE you have mentioned for comapny code?
Regards
Edited by: WISH on May 22, 2008 1:30 PM

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Shipping type in delivery (Entry does not exist)

i am trying to post good issue in the delivery and i have Shipping type field as mandatory but when i try to post good issue with a value in the Shipping type the system says Entry does not exist(check your entry). Kindly help.
Regards,
Shahzad

Dear Mr. Khero.
You should atleast share your solution with other members as well. Knowledge sharing is a good thing and we are all here for this purpose.
Hope you do understand.
Best Regards,
AI. (Your great Friend - You remember???)

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Full import error : "user does not exists"

Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AM

Hi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM

GR for Order (MVT 101) - Error - Table entry does not exist

I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.

Hi
Please, kindly check the note 183647 - Error message M7001.
As indicated in it, please, maintain the customizing entry in transaction OPK9 for your valuation area and re-test the system behaviour afterwards.
Regards,
Mauro

Dunning error (form does not exist)

Hi,
While performing the dunning after selection the Individual dunning notice for printout the system shwoing error that '''FORM F150_DUNN_01''' DOES NOT EXISTS.
When I tried several times to performance the dunning it showing the same error message as above said.
Can any one let me know why does this happening. please give your valuable solution regarging on the above said issue.
Thanks in Advance.
Regards,
Suresh

Hi
In Dunning Procedure --- FBMP
you will select new entries and give Dunning procedure , name , dunning intervals in days , No. of dunning levels , line item grace periods , interest indicator , select standard transaction dunning checkbox , reference dunning procedure for texts(dunning procedure) and save.
select Dunning texts button and give company code and select customer radio button and enter.
select new company code button and give company code and enter.
select seperate notice per dunning level checkbox
Deselect Dunning by Dunning Area checkbox and save.
select back arrow and select yes for the message to save the data.
select dunning texts button once again , give company code , select customer and enter.
Dunning level (1) Form (F150_DUNN_01)
Dunning level (2) Form (F150_DUNN_01)
Dunning level (3) Form (F150_DUNN_02)
Dunning level (4) Form (F150_DUNN_02)
select dunning levels button and under print parameters , select Always Dun CheckBox's.
select charges button , give currency and enter.
select back arrow and save
Assign the Dunning procedure in Customer Master.
Check with the Dunning Procedure you had created.
Regards
Venkat

Attempt to create a transformation results in error "transf. does not exist

Hello,
We're using BI 7.0 in my dept. I have a Data Store Object that I want to connect with a transformation to my DataSource. All objects are BI 7.0 objects, not 3.x. I right click my DataSource and select "create transformation" - as described in the BI documentation. I enter my DSO object as destination in the pop-up. As soon as I click on "execute" to confirm all entries in the pop-up, I get the error message "transformation does not exist, see long text". In the long text I find "The transformation specified by transformation ID , source and target , does not exist.". Well - of course my transformation doesn't exist yet, I wanted to create it! Does anyone share my unfortunate experience and found a way out?
Thanks for any tips you can give me! Annette

hi annette,
this is 1 of the possibility. i replicated the issue in my system and this is what i found out...
when you or whoever replicated the system (r/3 system connected with bw) he/she must have replicated the datasource as a 3x version and NOT as a 7x version. if that's the case, then you must have infosource inbetween (as 3x object you can't connect directly with datasource) and update rules (no transformation works). if that's what happened... then system will not allow you to create a transformation and will give you that error message. so please check if the datasource from r/3 got replicated properly (you have 2 options... replicate as 3x object OR replicate as datasource object 7x)
hope this helps...
regards,
sameer

ECC Installation Error - jlbznqjtg' does not exist on the 'localhost' host.

Hi Gurus,
Hope you all are doing good.
Enclosed are the details of what we were tried & got same error.
1. We are trying to install ECC 6.0 SR2 on Win 2003 Enterprise Edition along with Sql Server 2005.
2. We do not take any dump in local drives, usually we map from virtual Drives.
3. I checked my Host entry, Static IP & Environmantal Variable. That is fine.
4. I am able to Ping to the host
Now My question are
1. We must have to copy all the CDs in the Local machine?
2. How we can eradicate this problem.
Error Detail:
ERROR 2009-06-17 11:33:55
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
ERROR 2009-06-17 11:33:55
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\jlbznqjtg' does not exist on the 'localhost' host.
WARNING 2009-06-17 11:33:55
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\jlbznqjtg' does not exist on the 'localhost' host.
WARNING 2009-06-17 11:33:55
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\jlbznqjtg).
Waiting for your Reply.
Thanks & Regards
Rhishabh
Edited by: Sap_basis_admin on Jun 17, 2009 8:33 AM
Edited by: Sap_basis_admin on Jun 17, 2009 8:35 AM

Do NOT cross post across different forums:
Regardin - Services\jlbznqjtg' does not exist on the 'localhost' host
Markus

PowerOn Failed Error: Domain Does Not Exist

[Simon Thorpe's blog |http://blogs.oracle.com/simonthorpe/2009/07/migrating_a_vmware_server_2_wi.html] I'm new to OracleVM. The wizard through OVM Manager successfully converted a windows VMWare vm to ovm. I was able to start up the VM once and get the driver updates loaded. I was following Simon Thorpe's blog and other documents to complete this.
Upon reboot, I get the following error:
Start - /OVS/running_pool/ECM_Xmonth_2010_vm
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 69, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 113, in start_vm
raise e
Here's my vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/ECM_XMonth_2010_disk.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
maxmem = 2999
memory = 2999
name = 'ECM_Xmonth_2010_vm'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
sdl = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = '4d3f3741-e29c-472a-bfaf-7416d31d21e8'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:4C:BF:71,type=ioemu']
vif_other_config = []
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = '****'
Any advice?
Edited by: dierardi on Jan 6, 2010 9:21 AM
Edited by: dierardi on Jan 6, 2010 9:24 AM
Edited by: dierardi on Jan 6, 2010 10:00 AM

dierardi wrote:
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.Check /var/log/xen/xend.log for errors during boot: Essentially, the domain is failing to be created properly on startup.
If this is a linux guest, try running xm create -c vm.cfg from the ECM_Xmonth_2010_vm directory to start the guest with the console immediately attached. You may be able to see a boot/GRUB related error. If this is a Windows guest, you could start it paused with xm create -p vm.cfg and then attach a VNC console. Once you have a VNC session, you can resume the guest and it will begin booting.

Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

Similar Messages

Maybe you are looking for