Error "entry in SKB1 table"

hi friends,
am getting a error messg "entry does not exist in SKB1" . am trying to link the new company code to the clearing account in the treasury setup.
can someone tell me how to resolve this issue.
cheers
charlie

Hi
Check whether the GL account(Clearing account) is created in Company code
Regards
A
Assign points if useful
Message was edited by:
Aravind

Similar Messages

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

IDOC Error - Entry in outbound table not found - Status 37

Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
Michael

Hi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika

IDOC error : Entry in inbound table not found

Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
"Entry in inbound table not found..."
in diagnosis:
Noinbound partner profile could be found with the following key:
 /XXXHUB/LS/LS/FIDCC2//// ..
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..

Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks....

F-58 Error - Entry missing in Table T043G

Hi Gurus,
I am trying to post a check payment through F-58. This is a same company code payment. The error of the T043G table entry appears.
When I go to the table, all the relevant entries are maintained.
Please help as to what I am missing here.
Thanks
Sheli

Hi,
Go to T.code : OBA3 Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable>Business Transactions>Outgoing Payments>Manual Incoming Payments>Define Tolerances (Vendors) and create Tolerance Group and save
and go to FK02 and give vendor number ,company code and select payment transactions Check box and enter and give Tolerance Group and save
Thanks,
Raviteja

Entry in outbound table not found, Error message no. EO400

I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shah

Hi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj

Entry in outbound table not found

i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
         sender Port -
and partner abc02
in we20 is set up partner
abc01   type ls   in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr   message no 400   id E0
can anyone direct me to what i am doing wrong?????????????????/

Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth

Entry in outbound table not found in PFAC

Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?

Are you trying to do something related to IDOC/Partner profile related responsibilities?.

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Error in Sales Order idoc - No appropriate entry found in table ADRT

Hello SAP Gurus,
When I am retriggering a sales order idoc I am getting the following error message.
No appropriate entry found in table ADRT
How can I resolve this issue.
Thanks,
Narayan.

Hello Lakshmipati,
I have checked up the customer master. There was no communication method maintained for any of the customers.
But even then the order idoc is triggered to our XI system.
For the one that failed I have maintained the communication method and retriggered again. It had the same failure message.
Any helpful thoughts is highly appreciated.
Thanks & Regards,
Narayan.

Background job error No appropriate entry found in table ADRT

Hi,
I have developed a report to sent mail in background. My background job is getting cancelled in background. but it runs in foreground.I have used leave to transaction statement in my report.
In my development server job cancellation occurs.but mails are being sent.whereas in production server job cancellation ocurrs but mails are not sent.
It shows the below error also...
27.12.2010 17:00:00 Job started
27.12.2010 17:00:00 Step 001 started (program YSD_OUTSANDING, variant &0000000000094, user ID ABAPER)
27.12.2010 17:00:01 No appropriate entry found in table ADRT
27.12.2010 17:00:01 Job cancelled after system exception ERROR_MESSAGE
please help me to overcome this error...
Thanks & Regards,
A. Jenifer

I don't see how either of those replies are helpful...
To the OP, you haven't given much information. That's a custom program but the failure is being triggered most likely by your attempt to generate the email by the standard code. You need to get the error message ID and number from the log and find the codepoint (from a where-used analysis or debug) and analyze the condition that's triggering the message. Most likely, it's a simple fix - there appears to be a missing remakrk entry but sometimes those messages are misleading and the message issued isn't actually the problem.

Error : Entry 4 not in table EMSEG (system error) in MIGO

Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholi

you can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.

Error: No entry/entries in the table (WCCI)

Hello friends
I am trying to implement WCM to my client
when trying to change WCD i am getting the following error
No entry/entries in the table (WCCI)
    Message no. I4702    &
Error when executing function module (WCFC_PRINT_FORMAT_GET)
     Message no. I4804
Procedure
     Contact SAP.
i am not able to resolve the issue. Please help me in this regard
venkat

I have attached the screen shot.
Regards,
Amar

Status 29: Error in ALE service : Entry in outbound table not found

IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
Monika

Hi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM

ALE Error 29 - Entry in Outbound Table not found

Hi,
I am getting the following error in the IDOC processing.
IDoc: <IDOC Number> Status: Error in ALE service
Entry in outbound table not found
I have checked the partner profile. It is OK
I noticed that the IDoc record doesn't have the defined port. The value in the port section is empty.
The IDoc message type - CRMXIF_ORDER_SAVE_M
Basic Type: CRMXIF_ORDER_SAVE_M01
Any inputs will be appreciated.

Observations -
I checked the Status records for the IDOC and there are only 2 entries -
1. 01 IDoc Generated and
2. 29 Error in ALE Service - Entry in Outbound table not found

Error "entry in SKB1 table"

Similar Messages

Maybe you are looking for