Error establishing database connection.

I have a working Internet connection, and not had any trouble whatsoever pulling up any other pages.
I Received this error message when trying to pull up a specific website. I just installed the latest update, but was having difficulties before I did. My phone is jumpy and keypad is very touchy. Sometimes it types up crazy messages (ex: fhshsmdllk) on its own, and downloaded a whole U2 albulm off of iTunes???
I Don't know what's going on, but I am vwry aggravated with this error message because I really need to see this websit I'm trying to pull up. HELP please!!

Hi,
Please can you specify how you create your DSN for Oracle connection in ODBC Data Source Administrator?
What did you specify for the TNS Service Name?
What is the content of your TNSNAMES.ORA file?
Thx
Mireille

Similar Messages

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Error during database connection to the database : MS SQL Server 2008 R2

Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AM

Hi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub.

Error during database connection (JDBC)

Hello!
When I try testing my connection to MSSQL (using sender JDBC channel) in communication channel monitoring (RWB)i can read that Error explanation:
Error during database connection to the database URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX''
Before I did the communication channel configuration I did the driver instalation and deploy like in document "HowTo_ConfigExtAdapters". In Adapter Monitor (RWB) i can see the JDBC adapter instaled and started (gray square).
Any idea what is wrong?

hi,
try this:
jdbc:microsoft:sqlserver://
and not
jdbc:microsoftsqlserver
Regards,
michal

Establish Database connection to connect to OEM Repository from Agents

I have a requirement to establish Database connection from Agent through Plug-in.
Ex:
My plug-in metadata will have a perl script which gets executed in each individual agents and it should connect to the OEM Repository database to execute a package.
Your Help is Appreciable.

You would have to take in all of the information needed to connect to the database as instance properties for your target type. So each time someone creates an instance of your target type, they'd have to enter the connection details for the repository database.
The specifics of what are needed should be in the extensibility guide where the SQL fetchlet is documented.

Win7 and now Server Error [2007]: "Database connection information not acce

I support a 8.3.x server with Insight plugin in use. This has worked for some time now with WinXP. The issue comes into play when the company is upgrading users to Win7 stations. First, the zero-admin (download and install setup launch) is failing. The Install window opens but doesn't seem to be able to complete. Then, when we do get the plugin installed via the manual download and install, we then reach a point where the bqy will not connect with the Server Error [2007]: "Database connection information not accessible. Processing is disabled." If we proceed from there, we'll get Server Error [6] PUB_NullArgument errors and empty "Show Values" limit boxes. So it's like the .oce information is not received on the Win7 platform - it still works fine on WinXP installations.
And, I know it can work, as the PC Support personnel were able to get this working on one PC.
Any suggestions?
Thanks,
Keith

I assume that there has been no reply to this thread. The problem still persists, with intermittent success. I hope that someone can shed some light onto the Server Error [2007]: "Database connection information not accessible. Processing is disables." message.
Thanks again,
Keith

Sybase Connection Error - cannot establish database connection

BO Data Services Tool -> Creation of new Data Store -> Sybase ASE
When I tried to create a sybase datastore(New connection), I've got this error message. But I am able to connect to sybase database with client application with same connection parameter. I appreciate if someone come across same issue.
ERROR MESSAGE
*WARNING: Cannot establish database connecton.
u2018Sybase connecton error: <Sybase ASE Server message number <1640> State <2> Severity <16> From Server <tstlS03>: Message Text is:
Adaptve Server requires encrypton of the login password on the network.
Sybase ASE Server message number <4002> State <1> Severity <14> From Server <tstlSO3>: Message Text is: Login failed.
Sybase CS Library message number <6717S468> Severity <4>: Message Text is: ct_connectO: protocol specific layer: external error: The attempt to connect to the server failed.>.u2019 lODI- 1111341)

I tried to create repositories for sybase, it failed. But it succeeded when created datastore. The procedures's as follow:
1. Create ODBC for this sybase connection, and it should display "Connection successful" when you click "Test connection".
(you need to specify several parameters like user id & password, server,database name and file, etc.)
2. Create datastore by using ODBC connection.

Make use of established database connection

From within an application in the Application Navigation, I have successfully established a connection to a database which is on another host machine. The steps are:
right-click on the name of the application > select New > Database Tier > Database Connection > Connection Name ....
After the connection is done, I am able to see the tables, etc. in the Connection Navigation, i.e., the connection was successful.
Under the same application, I created a web project and in the project I am writing a servlet. I figure I can make use of the established connection as described above, to create sql statement object? But I do not know how. For example, I named that connection SbConnection, and tried the statements:
Statment stmt = null;
stmt = SbConnection.createStatement();
But it does not work out. I am trying this because the classical way of
Class.forname(....).newInstance();
Connection conn = DriverManager.getConnection(......);
does not work no matter how I tried.
I am just starting in doing web application, servlet and JSP etc. and would appreciate a lot for any help.

Fantastic, dvohra! It works out! Thanks a lot for the know-how!
Next I am going to dig out something to read about JNDI and DataSource type of connection. But the part of editing the web.xml is magic and myth to me. Any suggested books or web sites for reading? (After know-how is know-why and know what I am doing.) Many thanks!

FIM 2010 Sync Error : stopped-database-connection-lost

Hello everyone,
a weird thing just happened to me,
i'm synchronizing my MA and suddently i get the "stopped-database-connection-lost" error
i have 5 Galsync MAs working perfectly and this sixth one just failing ... (since like today)
which makes me wonder what is happening ... ?
any ideas ?
thanks !
Hitch Bardawil

Hitch,
Look in the event log on the FIM Sync Server and on the SQL Server.
This error occurs when FIM can't contact the SQL Server that hosts the FIMSynchronizationService database.
Does this happen every time the sixth MA is run? What if you run them in a different order (might help us distinguish between a resource issue and something specific to that MA)?
Here are a few related threads:
http://social.technet.microsoft.com/Forums/en-US/65920fc0-a9ac-4a87-892f-338a6884cbd5/action?threadDisplayName=fim-ma-run-profile-stuck-with-stoppeddatabaseconnectionlost
http://social.technet.microsoft.com/Forums/en-US/39129eac-09d3-48ff-83f9-ecb4ae2424b6/action?threadDisplayName=sharepoint-profile-synch-stoppeddatabaseconnectionlost
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

DRM-21003 error for database connection

Hi,
I installed DRM 11.1.2 for win32 on my laptop and when I tried to set up database connection (to 11g XE), I am getting error message:
Connection Failed: DRM-21003: The Oracle.DataAccess client is not the expected version.
I installed Oracle XE 11.2.0.2 on my laptop. I also tried to connect to 10g server(10.2.0.4), but still has the same error.
Thanks.
-Rong

Hi,
Apparently,this is a bug in version 11.2.1.0.I had the same issue.I believe this is an bug identified internally.BUG # 9911822.I uninstalled 11.2.1.0 and installed 11.2.1.102 version of the DRM software and this error no longer appears.
-Sireesha.

Error in Database Connection

Hi All,
In JDeveloper, I have created a new Database Connection. While testing the connection,Test Connection is Success.
But next step am clicking Next button, it is throwing the following error. tnsnames.ora and DBC files are correct.
It is showing the following error:
Validation Failed
No database connection available
Listener refused the connection with the following error:
ORA-12504, TNS:listener was not given the SID in CONNECT_DATA
I am able to connect with the database in PL/SQL Developer.
Thanks and Regards,
Myvizhi

Hi,
My tnsnames contains the following entry:
dcap1=
(DESCRIPTION=
(ADDRESS_LIST=
(LOAD_BALANCE=YES)
(FAILOVER=YES)
(ADDRESS=(PROTOCOL=tcp)(HOST=hostname1)(PORT=1533))
(ADDRESS=(PROTOCOL=tcp)(HOST=hostname2)(PORT=1533))
(CONNECT_DATA=
(SERVICE_NAME=dcap1)
Could you please suggest where am missing.
Thank you very much.
Kind Regards,
Myvizhi

Error on DataBase connection

Hi,
I try to connect my application (developt in C#) to an Oracle DataBase (in version 9.2.0.7.0).
In order to do that I use the following connection string :
"Data Source = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST= myadress())"+
                    "(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=servicename())));User Id=myaccount();Password=mypassword();";
And then :
using (var conn = new OracleConnection(GetConnectionString()))
     string Query = "SELECT * FROM DATA";
     var cmd = new OracleCommand(Query, conn);
     conn.Open();
I try to use the client 12.1 by using the Oracle.ManagedDataAccess.dll but I receive the following error :
"ORA-03111: Interruption reçue sur le canal de communication"
Nevertheless, I find in this communities: "The Oracle 12c client can only connect to Oracle DB 10.2 or later. 9.2 requires using Oracle 11.2 client or earlier." Link
That's why I try with client 11.2 by using Oracle.DataAccess.dll. But I receive another error :
"ORA-03134: Connections to this server version are no longer supported."
The DBA seems does not know why it doesn't work. So, can someone help me ?
Thanks a lot

If 12c doesn't show up when you click on "Deinstall Products" on the Oracle Universal Installer, then you have the 12c Home uninstalled.
Try this. Go to your Oracle Home for ODAC 11.2. The directory will be something like the following: C:\app\<user>\product\11.2.0\client_1.
Run the sqlplus.exe from this directory and try to connect to the 9.2.0.7 DB.
If it gives you the same error, then my suspicion is that DB 9.2.0.7 is too old of a release. You can either move the DB server to a higher version or try an even older ODP.NET 11.2 version or an 11.1 version.
I believe 9.2.0.8 was the last patchset available for the 9.2 line.

Manually establish database connection everytime!!

Hi,
This issue just happen recently,
whenever I try to log in to SAP portal, I have to manually key in the db details everytime in order to establish the connection.
In other words, SAP cannot remember the db connection, which make me really troublesome.
I had try to ping the server and is working fine.
So far I have no idea what might cause the issue happen.
Just hope I can get solution right here.
Machine info:
Win xp pro SP 3
SAP version:
SAP Business One 2007 B (8.60.041) SP:00 PL:20
Thanks for the help..!

You would have to take in all of the information needed to connect to the database as instance properties for your target type. So each time someone creates an instance of your target type, they'd have to enter the connection details for the repository database.
The specifics of what are needed should be in the extensibility guide where the SQL fetchlet is documented.

Error establishing ODBC connection to Oracle database from Access 2007

I am trying to access via linked tables from Access 2007 my ODBC connections.
I am able to setup and test successfully in the ODBC Data Source Administrator my Data source, and Driver(Oracle in OraHome92), and I used this successfully when I had Access 2003 on this PC.
system details: Oracle 9i, MS Access 2007 on Windows XP
error - call failed:
detailed error from sqlnet.log:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\Program Files\Microsoft Office\Office12\MSACCESS.EXE)(HOST=USRN4WNCNH6DDQG)(USER=fznp29))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
Time: 05-DEC-2008 11:38:05
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 126
nt OS err code: 0
Any ideas?

Hi,
Please can you specify how you create your DSN for Oracle connection in ODBC Data Source Administrator?
What did you specify for the TNS Service Name?
What is the content of your TNSNAMES.ORA file?
Thx
Mireille

Establishing Database connection for XML Data Definition?

I have a XML Data Definition which will query data from Oracle Database.
I did some research and tried few setting options in JDeveloper (11g), but had no luck on finding a way to connect to Database.
My goal is to use JDeveloper to run a XML Data Definition against Database and generate a XML File with data.
Can this be done?
Data Definition:
<?xml version="1.0" encoding="WINDOWS-1252"?>
<dataTemplate name="XX_ATT_VALIDATION" description="description"
dataSourceRef="MTS-AT"
version="1.0">
<properties>
          <property name="include_parameters" value="false" />
          <property name="include_null_Element" value="true" />
          <property name="include_rowset_tag" value="false" />
</properties>
<parameters>
          <parameter name="p_batch_id" dataType="character"/>
</parameters>
<dataQuery>
     <sqlStatement name="Q_HEADER_VALUES">
          <![CDATA[
select distinct
sci.bill_cycle,
to_char(sci.bill_date,'mm/dd/yyyy') bill_date,
to_char(sysdate,'mm/dd/yyyy') report_run_date
               from st_cm_interface sci
               where sci.record_type='05'
               and sci.batch_id=:p_batch_id
          ]]>
</sqlStatement>
<dataStructure>
     <group name="G_HEADER_VALUES" source="Q_HEADER_VALUES">
<element name="bill_cycle" value="bill_cycle"/>
<element name="bill_date" value="bill_date"/>
<element name="report_run_date" value="report_run_date"/>
</group>
</dataStructure>
</dataTemplate>

Hi,
Consider there is 2 database, Oracle_1 and Oracle_2.
I want to fetch some table data in Oracle_2 from Oracle_1 database Stored procedure/functions through query staments and cursors. How to establish the Oracle_1 DB connection in Oracle_2 DB stored procedure/function. Is it possible?
It's not the same how you implement the programs in java or .Net to create DB connection. It's different over here. You have use the DataBase Links in order to make to connection with another DB and use that Link in the stored procedure or function where ever its necessary as per your requirement.
- Pavan Kumar N

Error establishing database connection.

Similar Messages

Maybe you are looking for