Error event id: 16002

I get on one AD/DC, DNS server in the shool an warning error, event id: 16002;
"Closing a UDP socket with local port number 49631 in process 1160 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest
updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products. "
Anny idea why i get this error and why the server hangs till reboot. I can't do annything while the error is running only reboot by pushing the power button.
I have allready checked the drivers and they look up to date. This thee third time in 3 weeks.
Hope someone has a solution.

Hi,
This is the first event that gives a error with red flag.
at 11:00:59
"The DNS server timed out attempting an Active Directory service operation on cn=MicrosoftDNS,cn=System,DC=gbs-schransdries,DC=be. Check Active Directory to see that it is functioning properly. The event data contains the error.
- System
- Provider
   [ Name] Microsoft-Windows-DNS-Server-Service
   [ Guid] {71A551F5-C893-4849-886B-B5EC8502641E}
   EventID 4016
   Version 0
   Level 2
   Task 0
   Opcode 0
   Keywords 0x8000000000020000
- TimeCreated
   [ SystemTime] 2015-03-09T10:00:59.754811100Z
   EventRecordID 4546
   Correlation
- Execution
   [ ProcessID] 1900
   [ ThreadID] 3308
   Channel DNS Server
- Security
   [ UserID] S-1-5-18
- EventData
param1 cn=MicrosoftDNS,cn=System,DC=gbs-schransdries,DC=be
   55000000
and then after 9 min the following error happens with a yellow flag.
"Closing a UDP socket with local port number 52817 in process 1160 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest
updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.
11:09:56 afd warning
- System
+ Provider
   [ Name] AFD
- EventID 16002
   [ Qualifiers] 32768
   Level 3
   Task 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2015-03-09T10:09:56.708985900Z
   EventRecordID 282119
   Channel System
   Computer
   Security
- EventData
   \Device\Afd
   UDP
   52817
   1160
   000000000400300000000000823E0080000000000000000000000000000000000000000000000000
Hope you can make something out of this?
Regards

Similar Messages

CrystalReportViewer: "Missing parameter values with implemented error event

I'm using the CrystalReportViewer in APS.net (C#), and try to display a report in it.
I've implemented the error event of the viewer to show the user a different error message than the viewer itself does.
         this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
      protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
         var msg = "Error in CrystalReportViewer\r\n{0}".FormatInvariant(e.ErrorMessage);
         throw new InvalidOperationException(msg);
But.... Now if I want to show a report that has parameters in it, the parameter page does not appear before the report itself. How can I make my code work (without removing the implementation of the error event), so the viewer first shows the parameter page, before showing the actual report?

And in the Page_Load method:
this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
I've done this so i can show my own error page to the user of the website. Otherwise the CRViewer shows his own error, and I do not want the user of the website to see this 'technical' error.
So i've implemented the CrystalReportViewer.Error method:
protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
   // Missing parameter values.
   var discardToShowParameterPrompt = (e.ErrorMessage.ToUpperInvariant() == "Missing parameter values.".ToUpperInvariant())
     || (e.ErrorMessage.ToUpperInvariant() == "Ontbrekende parameterwaarden.".ToUpperInvariant());
   if (discardToShowParameterPrompt)
      _Log.Debug("The parameter screen should be displayed now.");
   else
      var msg = "Error in CrystalReportViewer: {0}".FormatInvariant(e.ErrorMessage);
      throw new InvalidOperationException(msg);
If I load a report with no params in the report, the page shows immediately the report.
If I load a report with params in the report, the params page is shown, the user can enter the param values, and after pressing OK, the report is shown.
If an error occurs (for example the report cannot connect to the database), the viewer does NOT show the error (because i've implemented the _error event) but my code throws an InvalidOperationException, and this is handled by code so the error is logged to a file, and the user gets a user friendly message on the website.
If i do not implement the _error event, the user will see the technical error in the crystal reports viewer.
If I comment out the code where I'm looking for the string "Missing parameter values." (or "Ontbrekende parameterwaarden") the parameter page will not be shown, and an error will be thrown by the Crystal Reports viewer.
If I put e.handled = true in the _error event, and there is an error (for example the database cannot be found), no error will be thrown, and there is nothing to see in the viewer.
So for now the only way to get the params page is to implement the _error event the way i've done in the above code, checking the error message on a string value.

Adobe Acrobat 8 Pro Application Error Event ID 1000

Version: Adobe Acrobat 8 Pro (Updated)
Operating System: Windows XP (Sp2)
Launch Adobe Acrobat 8 Pro
Select File and open a PDF file
Popup appears: Reading Untagged Document
Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
Also receive same error when I select Edit\Preferences
Application Event log contains the following:
Application Error Event ID 1000
Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
Have uninstalled and reinstalled application...no change
Any help would be apprciated

No, I have not.
Had another laptop and used it.
Re-imaged laptop exhibiting the issue and moved on
Edward Bailey | Network Administrator | Pizza Inn, Inc
t. 469.384.5231 [email protected]

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Event Source: Application Error Event ID: 1000 (F1Server.exe)

Hi.
We regulary have an Application Error with "faulting module ntdll.dll" (see below).
And we can't find what is the problem.
Can you help us?
Windows Server 2003 R2 Eneterprise Edition Service Pack 2
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=AlwaysOff /fastdetect /PAE /3Gb
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 1/11/2014
Time: 10:33:47 PM
User: N/A
Computer: MS-GARANT001
Description:
Faulting application F1Server.exe, version 7.9.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x00060c17.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 46 31 53 ure F1S
0018: 65 72 76 65 72 2e 65 78 erver.ex
0020: 65 20 37 2e 39 2e 30 2e e 7.9.0.
0028: 30 20 69 6e 20 6e 74 64 0 in ntd
0030: 6c 6c 2e 64 6c 6c 20 35 ll.dll 5
0038: 2e 32 2e 33 37 39 30 2e .2.3790.
0040: 34 39 33 37 20 61 74 20 4937 at
0048: 6f 66 66 73 65 74 20 30 offset 0
0050: 30 30 36 30 63 31 37 0060c17

Hi,
This issue may be caused by corrupted files or application conflicts. I recommend you to run "sfc /scannow" at the command prompt to check the system files. In addition, you can perform a clean boot to see if any service is causing the issue.
If the above cannot solve it, maybe you can find if there is any hotfix for the application or uninstall the application.
Best regards,
Susie

Error "Event Queue Overflowed" with the "Write file to Citadel Server"

Hello,
I can import data from a file and I can see the data
in the historical database without troubling.
But I always have this error "Event Queue Overflowed", that don't perturb my data and my application (I have just this boring message).
I have tried many things :
- increasing the size of my input buffer (-> 1.000.000, no change) : I don't think so that it's important because I've tried with a value of 100 and anyway sometimes my application works with this small value of 100.
- increasing the File_location tag size (-> 260). No change.
- My write to Citadel.cfg is in the LabVIEW folder.
Can you help me ?
Thank you.

Hi,
What version of LabVIEW DSC are you using? if it is 6.1, have you applied fixes linked below.
http://digital.ni.com/softlib.nsf/websearch/513AA4A0BB60D10086256B48006D44B5?opendocument
I have seen a similar issue at the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000008C640000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control
Please let me know if you have read it through?
Best Regards,
Remzi A.

System ERROR EVENT WARNING : ORACLE.APPS.AR.HZ.CUSTACCOUNT.CREATE

Hi,
When Customer is Created / Updated using Receivables or TCA APIs in Oracle Apps 11.5.10, all registered Business Events are firing and subscription code (PL/SQL Rule Function) is executing successfully.
In Administrator Workflow window, Notifications tab showing System Error: Warning Message for all the events which are subscribed.
eg:
"System: Error Event WARNING : oracle.apps.ar.hz.CustAccount.create /
oracle.apps.ar.hz.CustAccount.create62829 " Warning Message.
Please advice.
Thanks and Regards,
Vijay

Whenever there is a requirement of raising a Business Event due to some custom activity, you should call wf_event.raise to do this.
Just google to see the parameters you need to pass it while calling it.

Disk Error event ID 153

Receiving disk error event ID 153 in Server 2012 - The IO operation at logical block address 0x0 for Disk 1 was retried. Does this error mean something is wrong with the hard drives?

Possibly. Run chkdisk to see if it turns up something.
. : | : . : | : . tim

Error events 31551 and31552 only during the night

events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
Also 16 events warning 2115 showed up in between the 31551-315522.
At all time we have many warnings 29202,
If not closely monitored our rms health service stops working ... "Staled" state
No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
No antivirus on Db.
The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data every night for some time... During the day DW db size is 74062,56 MB
We moved SQL data and log folders on different luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
The datawarehouse lun has long latency during the night, up to 15 sec.
No new MP installed in the past 8 months, only few overrides and disables recently
Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
Can you please help us determine what causes these error events to show up at night only...
Summary of error events follows:
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31551
Date:  04/06/2014
Time:  08:00:31
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
Instance name: MMTRLPALPINF033.Prod.MJQ.Local
Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
Workflow name can also be "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
One 31551 with following description
Failed to store data in the Data Warehouse.
The operation will be retried. Exception 'SqlException':
A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
Event 31552
vent Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31552
Date:  04/06/2014
Time:  07:08:45
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
Instance name: Performance data set
Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
Management group: OPSMGR_P
Event Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Management group: OPSMG
The 31552 was mostly with Instance name: Performance data set
Some with Instance name: event data set or state data set and some with the RMS server.

Hi,
You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
Same issue here, please refer to this one:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Amfphp - flex remote object error event handler

I'm using amfphp and I want it to return an error that the flex remote object error event handler will pick up. At the moment I can get only the result handler to do anything in flex.

Hi,
Try throwing an exception in the remote method. For example,
function inverse($x) {
    if (!$x) {
        throw new Exception('Division by zero.');
    else return 1/$x;

Error Event ID 103 on publishing server

Hello everyone
I started migrating my environment from App-V 4.x to App-V 5.0
I installed one App-V Management Server and one App-V Publishing server, I created a new group called App-V Admins which includes all the App-V administrators and the machine accounts of both servers and I added it to the local
administrator group on both of the servers so they will have full permission on each other
the management server seems to work fine but the publishing server get
AuthenticationFailed when I navigate to http://localhost:82.
on the event viewer of the publishing server I see the Error Event ID 103.
as a workaround I tired to install the Publishing role on the Management server and there - everything works fine and I can publish packages to clients without any issues.
firewall is disabled on both servers so there's shouldn't be any block
I re-installed the publishing server, changed ports... everything I could think of... I still get that annoying error
my environment is a bit restrict in general because it's a finance organization, so permissions on DC are not widely open but still, I even tried to add permissions on my DC's root for App-V Admins and it makes no difference.
anyway, following TechNet, there's no special permission request so I don't even know if that's the problem
anyone with ideas?
thanks
Tamir Levy

Hi Sayareddy,
What operations did you do when you met this issue?
Whether you created some event receviers in your SharePoint.
Please provid access to nt authority\authenticated users group in the master page gallery as read.
Repairing SharePoint installation, compare the result.
If this issue still exists, I suggest you install the latest CU to check if it works.
Here are some similar posts for your references:
https://technet.microsoft.com/en-us/library/ff382637%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
https://social.technet.microsoft.com/Forums/en-US/45690250-9c63-49b8-96ea-fe471568e5ad/event-6875-error-help?forum=sharepointadminprevious
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to: subscribe for the viewer's Error event

I am running a third party report tool and am trying to understand how to comply with their request. My report works fine in all export modes with the exception of export to word at which time it throws a "Index was outside the bounds of the array"
error. This does not occur in any other export mode (i.e., Excel, RTF, TIFF, yada, yada.)
The request from the vendor is " subscribe for the viewer's Error event and the report's Error event to get the exception."
I run Win8.1 and would like to create a subscription to the View Event log to trap the occurrence of this error. I have tried to locate some documentation online as to how I can accomplish this.
Where can I find this information as well as an example?
Tom Mann MCSD C#

They seem to be suggesting that the control will raise an error event which you can subscribe to.
myViewer.Error += SomeHandler;
and presumably
private void SomeHandler(object sender, EventArgs a)
// Do some error handling.
If there turns out to be no actual error event then..,..
Can you put a try catch block round code does the export?
I'm guessing maybe not and it's an internal thing in the viewer.
Plan C , let's see now.
Try to find a way to override that button click on the viewer.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

Workflow error Event 11903

We are receiving the following error Event ID 11903
The Microsoft Operations Manager Expression Filter Module could not convert
the received value to the requested type.
Property Expression: 529;644
Property Value: 529;644
Conversion Type: DataItemElementTypeUnsignedInteger(6)
Original Error: 0x80FF005A
One or more workflows were affected by this.
Workflow name: MomUIGeneratedRule125158e6dd2149fbb8ab76e647986b1c
Instance name: XXXXXX
Instance ID: {40D48D2D-5A62-BC78-2D39-8A15985F5AE2}
Management group: XXXXXX
Any help greatly appreciated

Hi Graham,
I am having the same kind of issue in my environment. This event gets logged into all my server logs. But i am unable to find which rule is creating this error. Is there a query to find the rule name from any of the below.
Property Expression: ^(1069)$
Property Value: ^(1069)$
Conversion Type: DataItemElementTypeUnsignedInteger(6)
Original Error: 0x80FF005A
One or more workflows were affected by this.
Workflow name: MomUIGeneratedRule125158e6dd2149fbb8ab76e647986b1c
Instance name: XXXXXX
Instance ID: {40D48D2D-5A62-BC78-2D39-8A15985F5AE2}
Management group: XXXXXX
Jesty

Windows 7 rc error event id 6008

Hey ppl, I've notice people on this forum with similar problems but not exactly the same as mine... I've been using win 7 RC x86 for the past month and it worked great. About 4 days ago it started randomly crashing but with no blue screen of death. It crashed like someone pulled the plug on the machine so my monitor shows a black screen getting no video input however my power light on my pc stays on... After it happened 3 times in one day i did a clean install... It worked great for a day and then happened again... It happens at random time intervals and except for one time, while i am not using the pc... It is getting really annoying now, I will prob try another clean install but it may just happen the same way again... I tried the memory test and it returned with no problems... And I did not install much applications since the last time i re installed... just office, photoshop and nero 8... I have my power setting set to never turn the monitor off nor the hard drive and i don't use a screen saver...normally when i leave the machine i just turn my monitor off...
Here is the error i got in event viewer...
Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-08-31T05:10:39.000000000Z" />
<EventRecordID>2701</EventRecordID>
<Channel>System</Channel>
<Computer>Jason-PC</Computer>
<Security />
</System>
- <EventData>
<Data>9:08:59 PM</Data>
<Data>‎8/‎30/‎2009</Data>
<Data />
<Data />
<Data>12379</Data>
<Data />
<Data />
<Binary>D907080000001E00150008003B004F00D907080001001F00050008003B004F003C0000003C000000000000000000000000000000000000000100000000000000</Binary>
</EventData>
</Event>
I use an amd athlon 64 dual core 5000+ (2.6GHz) with 4GB ram...
Thanks for the future help....

there is no %systemroot%\minidump folder...
this is what i get in the event logs for the crashes
firstly under critical
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2009-09-02T04:02:20.300000000Z" />
<EventRecordID>3132</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Jason-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
and under error
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-02T04:02:34.000000000Z" />
<EventRecordID>3128</EventRecordID>
<Channel>System</Channel>
<Computer>Jason-PC</Computer>
<Security />
</System>
- <EventData>
<Data>8:00:33 PM</Data>
<Data>‎9/‎1/‎2009</Data>
<Data />
<Data />
<Data>141</Data>
<Data />
<Data />
<Binary>D9070900020001001400000021001A03D9070900030002000400000021001A033C0000003C0000000000000000000000000000000000000001000000DB010000</Binary>
</EventData>
</Event>
that's all i find....

Error event id: 16002

Similar Messages

Maybe you are looking for