Error - EVENT ID 4353 Mean anything to anyone?

Wondering if this means anything to anyone. I am not the developer and the developer says they "shouldnt matter" I have a feeling this may be causing some issues with printing reports to a label printer
Event Type:     Error
Event Source:     Crystal Reports
Event Category:     None
Event ID:     4353
Date:          8/19/2008
Time:          4:30:05 PM
User:          N/A
Computer:     FVEGA
Description:
The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode retrieved from the registry is invalid.

I have several issues....
When I select reports I am coming up with a communications error.
I recieve the following event id's but I am unable to find out what they meen.
34200
35602
34400
35302
My investigation leads me to believe it is an issue with the Registry or the Registry Key.
Can anyone let me know what these event id's mean?

Similar Messages

ITunes does not recognize iPad due to "unknown error OxE80000565." Does this mean anything to anyone?

iTunes does not recognize iPad due to "Unknown error OxE80000565." Does this mean anything to anyone?

Hello pyloric
For that specific issue, check out the article below for the steps to walk you through to get your iPad talking to iTunes again.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Regards,
-Norm G.

This iPad cannot be used as the Apple Mobile Device Service is not started. Does this mean anything to anyone? How can I sync my iPad again?

"This iPad cannot be used as the Apple Mobile Device Service is not started". Does this mean anything to anyone? How can I sync my iPad again? Many thanks.

In Windows 7, go to Control Panel, Adminisstrative Tools, Computer management, Services. In the servies box will be Apple Mobile Device (mine is 4th from top) click on this and on the left side you can start service or right click the service and start from the drop down menu. I set mine to "delayed start" no issues since then.
BPW

Keychain Access - does this mean anything to anyone

I have the access restricted box after putting in the password, and after following suggestions from various posts I did the Verify Permissions and Repair Permissions.
This is what came up on both:-
ACL found but not expected on "Applications/Utilities/Keychain Access.app".
Anyone know what ACL means - does it help at all?

Copy/paste this command into Terminal, leave a space and drag Keychain Acess.app in and post the output
ls -la
An ACL is an Access Control List. It may add certain modifications to the basic Unix permissions of a file. I'm seeing one on my Keychain, so I don't think we want to remove it on yours.
EDITED: disregard the first command I gave you, if you saw it.
Message was edited by: WZZZ

Error Event id 7031 and 10016 occurring again and again in w2k8 r2

Hi,
Error Event id 7031 and 10016 occurring again and again in w2k8 r2.
I have tried to rejoin the domain, gpupdate but nothing resolve these two error event ids from VM. Can anyone help me out on this.
**___ Event id 10016**____
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}
and APPID
{B292921D-AF50-400C-9B75-0C57A7F29BA1}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Event id 7031 -->
The SMS Agent Host service terminated unexpectedly. It has done this 12 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
Inder Johar

Hi,
Do you install Antivirus Symantec on your server? If so, uninstalled the Antivirus Symantec and rebooted the server to see if the issue still exists.
You could refer to the thread below to changed permissions registry HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AppID\{B292921D-AF50-400c-9B75-0C57A7F29BA1} to check the result:
Windows Server 2008, SCCM 2007 DCOM Issue
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5bf4a668-fe71-4f23-8932-dd727a1bcfa3/windows-server-2008-sccm-2007-dcom-issue?forum=configmgrgeneral
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error message has just occurred... This copy of itunes is corrupted. Please reinstall itunes. I'm using a Macbook operating on version 10.6.8 - not that this means anything to me. I just want to preserve my library and playlists! What do I do?!

Error message has just occurred... This copy of itunes is corrupted. Please reinstall itunes. I'm using a Macbook operating on version 10.6.8 - not that this means anything to me. I just want to preserve my library and playlists! What do I do?!

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Bonjour keeps generating error event 100. It's there 128 times in a week! What does it mean?

Bonjour keeps generating error event 100 in windows 8.1 event viewer. It's there 128 times in a week! What does it mean?

Hey Michael,
That error could be cause by a conflict with the firewall on your computer. Take a look at the articles below to go over some troubleshooting as well as verifying that Bonjour was properly installed on your computer.
iTunes for Windows: Bonjour alert due to firewall, security, or proxy software
http://support.apple.com/en-us/HT203392
How to tell if Bonjour for Windows successfully installed
http://support.apple.com/en-us/HT201776
Take care,
-Norm G.

Hi, I'm moving my site from MobileMe to Filezilla and there is apparently a coding error on iWeb that means when I try to get onto my site there's no access online and it says there are too many redirects. Anyone have any idea what this might be?

Hi, I'm moving my site from MobileMe to Filezilla and there is apparently a coding error on iWeb that means when I try to get onto my site there's no access online and it says there are too many redirects. Anyone have any idea what this might be?

Well, firstly Filezilla is not a hosting company but an ftp client that helps you upload your site to your new server. You need to purchase a new hosting account first though.
If you have iWeb 09 then you can publish directly to your new host and you select the publish to ftp option and not MobileMe - MobileMe won't be here after tomorrow.
You can also publish to a local folder if want to and use Filezilla to upload your site to your server.
You don't need re-directs as MobileMe won't be here so you need to cancel and delete your domain name from your MobileMe account and then cancel any domain name forwarding that you have at your domain name registrar - that is what the redirects are about.
Firstly ensure that you have your new hostings account - Filezilla is not a host, rather an ftp client that you use to upload your site.

I updated my iphone to OS 5.0.1 and i can not add events to my iphone calendar- does anyone know how to fix this issue?

I updated my iphone to OS 5.0.1 and i can not add events to my iphone calendar- does anyone know how to fix this issue?

I updated today to the 5.0.1 and now when I try to sync to ITunes, it doesn't recognize my phone and an error message comes up saying that "This iPhone cannot be used because the Apple Mobile Device service is not started.' What does this mean? Never mind - I found an article in the Support about this very thing! Thanks!
Message was edited by: Peytsmom

CRVS2010 Beta - Event ID 4353, VS2010 crash when database expert used

I have been fighting this issue for a few days now. My co-workers and I just recently received VS 2010 Pro licenses and installed successfully on our desktops. Then, we all downloaded and installed the CR2010 beta 2. The other two guys I work with had no problems creating their first reports using CR2010 beta 2, where as I end up with a crashed VS 2010 and an event logged as follows:
Event Type:     Error
Event Source:     Crystal Reports
Event Category:     None
Event ID:     4353
Date:          9/13/2010
Time:          12:00:33 PM
User:          N/A
Computer:     KFC-PM-71736
Description:
The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
I have been reading the forum (as best I can with our terrible ISP here) and have not been able to find anything that corrects my issue. All 3 of us have the same machine and similar products installed (VB 6 with CR, VS 2003 with CR, and VS 2005 with CR).   Again, the other two guys have not experienced any issues.
Any help would be greatly appreciated.
I am also trying to work thorugh getting a dump of the process so that I might try and troubleshoot more on my own, but have been unable to get the tools to work out for me (DebugDiag and Process Monitor and attaching process in a second VS 2010).

That is interesting that the order may have made a difference.
Anyhow, I don't have a clean machine in which to work from; I really need to get some sort of reports solution working with my VS 2010. Can you recommend a production level Crystal Reports version that will work with VS 2010? Maybe something that can be installed side-by-side with the other products I already have installed?
I thought I might have read somewhere about 2008?
Thanks for your help. I felt like I was hitting up against a wall when everyone else seemed to get things to work, yet I all I got was a crashed VS 2010 (when attempting to use the Database Expert).
Shay

Someone stole my ipod while i was at school. i was wondering if apple is able to locate the stolen ipod through a serial number considering i still have it. i also have another ipod linked to the same itunes account if that means anything.

Hi, someone stole my ipod during school. I was hoping that apple would be able to find my ipod through the serial number. the stolen ipod is linked to the same itunes account as one of my other ipods... if that means anything. another thing is the passcode was on when it was taken so who ever stole it probably isn't having much luck getting into it. anyways, i would be glad to hear anyone's ideas on how to get it back

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

MachineExceptions.h:245: error: declaration does not declare anything

I've been having a terrible time trying to compile something and have worked through most issues, but running into this error:
/System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framewor k/Headers/MachineExceptions.h:245: error: declaration does not declare anything
What little there is on the web seems to indicate that there's something perhaps messed up with vtk on intel macs? Or perhaps something else. I also can't seem to compile vtk from source at all, so couldn't fix it that way.
Anyone have any suggestions?
Mac Pro Mac OS X (10.4.9) 8-core, x1900 vid

Hi Jeff,
> Well, geometric algebra need not encompass the
whole of Clifford algebras in order to be a development
in the field.
   Of course I'm not saying that Geometric Algebra must contain the entirety of the theory of Clifford Algebras in order to be a development in the area. I'm saying that it must leave the confines of that area to be a development. I'm sure you've encountered the word "subset" in the math you've already studied. There is nothing in the definition of a subset about how much of the parent set that the subset should contain. The only requirement of a subset is that it cannot leave the confines of the parent set. I don't care how much of the original theory is omitted, I'm just saying that there exists nothing outside of the original theory.
> Are you saying the work being done is entirely redundant
and should perhaps be abandoned for what's already
been done in studying Clifford algebras and their
generalizations?
   Now you're addressing the meaning of my statements; "Entirely redundant" does characterize a subset so yes, that is what I'm saying. However, you then read in additional meaning. No, I'm not saying that it should be abandoned. I tried to devote half of the original post to saying that a rose by any other name ...
> Perhaps it's just the way you express yourself, but
this topic does seem like it hits a nerve with you
   You are correct. I excluded my perception of plagiarism from the set of statements that I claim to be factual but it's difficult to hide my strong emotional response to that. I agree with everything you say about reformulations but there are right ways and wrong ways to do that. Consider the following search, Google search: Clifford site:geometricalgebra.org, for the word "Clifford" on their website. The only places it appears is in source code and then it is merely a reference to a conjugation operator. There is no mention of Clifford Algebras on their website. The right way would be to state the situation up front.
   I apologize for inflicting my emotional baggage on you. All I really wanted to do is to warn you. You have exactly the right attitude. I envy the sense of wonder and discovery that you now enjoy and the last thing I want to do is to dampen that. In fact, what I would most like to convey is that that feeling shouldn't diminish as you continue. What I fear and want to prepare you for is that when you are ready to branch out and learn the math, it will likely be more difficult than it should be because they haven't given the math foundation that you would need. My fear is that you might get the impression that the math itself is more difficult than it is. I don't want frustration to hinder your efforts to learn.
   You have a great attitude now. I'm convinced that you sense the power and the beauty of the subject. As long as you resist frustration and continue to learn, you should be fine. I assure you that the subject is worth any and all effort that you put into it.
Gary
~~~~
   Before borrowing money from a friend,
   decide which you need more.
         -- Addison H. Hallock

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Disk Error event ID 153

Receiving disk error event ID 153 in Server 2012 - The IO operation at logical block address 0x0 for Disk 1 was retried. Does this error mean something is wrong with the hard drives?

Possibly. Run chkdisk to see if it turns up something.
. : | : . : | : . tim

Amfphp - flex remote object error event handler

I'm using amfphp and I want it to return an error that the flex remote object error event handler will pick up. At the moment I can get only the result handler to do anything in flex.

Hi,
Try throwing an exception in the remote method. For example,
function inverse($x) {
    if (!$x) {
        throw new Exception('Division by zero.');
    else return 1/$x;

Error - EVENT ID 4353 Mean anything to anyone?

Similar Messages

Maybe you are looking for