Error "Event Queue Overflowed" with the "Write file to Citadel Server"

Hello,
I can import data from a file and I can see the data
in the historical database without troubling.
But I always have this error "Event Queue Overflowed", that don't perturb my data and my application (I have just this boring message).
I have tried many things :
- increasing the size of my input buffer (-> 1.000.000, no change) : I don't think so that it's important because I've tried with a value of 100 and anyway sometimes my application works with this small value of 100.
- increasing the File_location tag size (-> 260). No change.
- My write to Citadel.cfg is in the LabVIEW folder.
Can you help me ?
Thank you.

Hi,
What version of LabVIEW DSC are you using? if it is 6.1, have you applied fixes linked below.
http://digital.ni.com/softlib.nsf/websearch/513AA4A0BB60D10086256B48006D44B5?opendocument
I have seen a similar issue at the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000008C640000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control
Please let me know if you have read it through?
Best Regards,
Remzi A.

Similar Messages

Enable to have the Write File to Citadel Example working

Did somebody already run the Write File to Citadel Example with success ?
This exemple aims at Importing Spreadsheet Data to the Citadel Database, and is given in the NI developer Zone --> Development Library --> Labview --> DSC --> Data Logging.
I can run the exemple as described without any visible problem. But when I look at Citadel (through MAX), I can't find any trace of the data I imported (sine_wave_one for instance). According to the SampleSpreadsheet.csv I used for import, I should find a trace in the database around the 21st of march 2002...
But I found nothing.
Any help?
Thanks,
Hélène.

I am not sure how savvy LabVIEW programmer you are, but if you feel confident you can go ahead and try to debug the code.
The VI based servers are running on the background. You can however make the front panel visible during the execution - not the diagram. The debugging means you have to create a few indicators on the panel that will show what is going on on the diagram.
These are the steps the enable the front panel during the execution:
1) Open the Write File to Citadel Server VI
2) File>>VI properties; select Window Appearance
3) Click Customize and check the Show FP when called and Show FP when loaded
4) Save it and relaunch the engine!
When you start the engine again, you should get th
e server front panel. Once you'll have some indicators on the FP you'll be able to learn more about what is going on in the VI.
I have noticed that sometimes the example pops up with a File dialog box. I found out this was related to a race condition in the example. I am not sure if that's what you see.
Let me know.
Also if the example executes you should see the tag values changing - for example the string tags starts with "Row 0", "Row 1" ...
Is that what you see?
Dr.Tag

Error message: URL's with the type "file:" are not supported. I get this pop-up twice each time I enter Safari and Mail.

Everytime I go into Mail and/or Safari, I receive a pop-up the states "There was a problem connecting to the server. URL's with the type "File:" are not supported. The pop-up comes up twice each time and I have to click "ok" to close them. Only started after install of OS Lion 10.7. Any one else have this and is there a solution. It is just plain irrating that is does this each time I check my mail or go on the internet. Thanks!

That's interesting. I bet that helps other Safari users!

Problems with the shared files of Windows Server 2003 and Mac

I have some Mac computers in the domain of my LAN Network, and when I share a folder in Windows Server 2003 sometimes the Mac can not see and sometimes yes, but lasts a long time so that they can view folders. I have installed the protocol Apple Talk on the server and File Server and in the Domain Server.
The folders when users have no security users or groups are immediately with a connection AFP, but if they have not already created security can be displayed with a connection AFP, but if you can visualize a connection with SMB, but I can not work with Quark 6.0 Pro files.
What can I do to solve this problem.
Asalomon

The newer printers:
canon irc3100
canon ir5020-i have working on osx side, not in classic
Older printers:
hp laserjet 5m-2 of these
hp 2200
hp laserjet 5si-2 of these
hp laserjet 4100
These are installed on windows 2003 with mac print services running. I need to know what option i should use in osx when installing these network printers on these macs. When i go to printers folder, i chose windows printing then it prompts for the ppd file. I found it for the ir5020 but not the ir3100. I really need to test the hp laserjets in osx too. Ill post up when i test those. But that one canon (ir3100) is bothering me. They are roughly the same age and the drivers on the site don't seem to work.

Write File to Citadel Example works or not depending on the Win200 session

I've run the Write File to Citadel Example. It works fine in one of my win2000 sessions but doesn't run in another different sessions in the same computer. Both sessions with administrator privileges. I've tryed to run it in a different computer but with no success.

Is your Win2000 computer running the NTFS file system? If so, one user may have different file read/write permissions for the affected files.

Problem with the installation file

Hello Everyone!
I am trying to install Nokia Ovi Suite in my Windows 7 computer from yesterday, whenever I run the web installer file I am getting the Error Message as "Problem with the installation file" (attached as a jpeg file with this post).
I have downloaded the exe file (approx 88.4MB from : http://nds1.nokia.com/files/support/global/phones/software/Nokia_Ovi_Suite_webinstaller_ALL.exe ) several times, still no luck.
Anyone is having the solution for this problem?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
Error Message.JPG ‏23 KB

Hi SSA
I've downloaded it so many times I nearly exceeded my download limit ! Seriously , I know others must be able to get it , so why is there a problem ? I'm going to stop at the store where I purchased the phone and get THEM to try. If the sig is OK , I'm going to copy it and bring it home , if it's NOT OK then maybe they'll take it up with Nokia as they're the ones selling it to the ' happy customers' ..? When I first contacted support , they said to disable both firewall and A/V before attempting to download it ? I've downloaded thousands of files and never had to do that ? Sure ,you might have to disable something during installation , but not for the download ? I even did it in safe mode with networking and the same thing happened. I even asked if they could send me an install CD and they said NO. Not happy about that either..We'll see what happens.. I like the phone ..I'd just like it to do what I bought it for !!

Hi, i have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)

hi good morning,
I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
can you help us with this problem?

Hi, thanks for the fast response.
This is the Extended Font Pack i have installed on the Terminal server.
what do you mean by properly embedded? how can i check that?
BR
Eric Mizrachi

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do.

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

I keep getting an error message saying "There was a problem connecting to the server. URLs with the type "file:" are not supported." Can someone help me get rid of it.

I keep getting an error message saying "There was a problem connecting to the server. URLs with the type "file:" are not supported" Can someone help me locate and get rid of this error.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'

hi all
i am using Application server 10g R2 while running report i am getting the following error
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
i configured the Reports_Path
with C:\windows\fonts if anyone faced the same problem plz help me.

hi
if you have problem you can post your own thread and we will try to help you.
sarah

URLs with the type "file:" error

"I'm using OS 10.8.3 on a MacBook and since I installed Mountain Lion I keep getting the error message "There was a problem connecting to the server. URLs with the type "file:" are not supported." I click Ok to close the window, but it reoccures frequently and randomly while I'm working. I have replaced my Time Machine disk, because I thought that might be the problem, and still get the error. Anyone know how to correct the problem?

See here: https://discussions.apple.com/message/21480962#21480962

Since updating to mountain line, error message "There was a problem connecting to the server. URLs with the type "file:" are not supported" keeps popping up

Since updating to Mountain Lion in the last week, an error message keeps popping up. The graphic is the button with 3 stick men holding hands and the message is "There was a problem connecting to the server. URLs with the type "file:" are not supported". Any solutions found?

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Error "Event Queue Overflowed​" with the "Write file to Citadel Server"

Similar Messages

Maybe you are looking for

Error "Event Queue Overflowed" with the "Write file to Citadel Server"