Error events 31551 and31552 only during the night

events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
Also 16 events warning 2115 showed up in between the 31551-315522.
At all time we have many warnings 29202,
If not closely monitored our rms health service stops working ... "Staled" state
No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
No antivirus on Db.
The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data  every night for some time... During the day DW db size is 74062,56 MB
We moved SQL data and log folders on different  luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
The datawarehouse lun has long latency during the night, up to 15 sec.
No new MP installed in the past 8 months, only few overrides and disables recently
Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
Can you please help us determine what causes these error events to show up at night only...
Summary of error events follows:
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31551
Date:  04/06/2014
Time:  08:00:31
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this. 
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
Instance name: MMTRLPALPINF033.Prod.MJQ.Local
Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
Workflow name can also be  "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
One 31551 with following description
Failed to store data in the Data Warehouse.
The operation will be retried. Exception 'SqlException':
A transport-level error has occurred when receiving results from the server.
 (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
Event 31552
vent Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31552
Date:  04/06/2014
Time:  07:08:45
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this. 
Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
Instance name: Performance data set
Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
Management group: OPSMGR_P
Event Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Management group: OPSMG
The 31552 was mostly with Instance name: Performance data set
Some with Instance name: event  data set or state data set and some with the RMS server.

Hi,
You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
Same issue here, please refer to this one:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Process orders in the weekend moving during the night in APO/PPT1

    Hello Gurus,
    I have a problem on the scheduling of production orders when these orders are scheduled
    on the week end.
    Problem description: 
    On day 1 the short term planner schedules production orders in PPT1 (APO) on the
    week end.
    During the night these production orders are re-exploded in ECC (see: COR2 => Read
    Master Data)
    On day 2 the end production date of orders that were in the week end, have moved
    by the system to the Sunday night.
    Step 1: The order is scheduled on the week end on Saturday 14 March 2015.
    Step 2: We explode the order in ECC
    In ECC, we have:
    But if we check the order in APO, we have:
    You can see that the process order are placed at the night of sunday, also if in ECC after explosion was always where was planned.
    Have you any idea how to avoid that the process order moving in APO ?
    Thanks Gurus.
    Livio

    Hi
    You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
    br, Ajay M

  • Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

    Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

    During sleep, your MacBook consumes a little part of the battery, so it won't harm leaving it in sleep mode. Also, you will be able to start using it quickly, as you don't need to wait until Mac OS X turns on.
    I only recommend you to turn off the MacBook if you are not going to use it for days in order to save battery, but apart from that, you don't need to turn it off

  • Keeping Stock Headphones in your ears during the night

    Hi... it's been a while since I've posted, or even logged in for that matter. But anyways, I've got a question. If anyone knows what a Lucid Dream is, I had my second one in 2 weeks last night. (It's a dream in which you are aware that you are dreaming). Just read dreamviews.com. Anyway, I wanted to try this lucid remix song. It's on my iPod. But my problem is getting the earbuds to stay in my ears during the course of the night. I sleep on my back when using the earbuds, because they are painful when sleeping on your side.
    Also, I'm using the stock headphones.
    Thanks.

    Well I only listen at about 15% volume during the night. And the lucid dream remix song is not constant noise. It's more slowly building tension, keeping that tension, releasing the tention, and occasionally saying frases such as "You will remember to check your reality and identify that you are in a dream state."
    How do I tape them? Do I tape them to my head or do I tape them together.

  • Lumia 920 freezes/crashes during the night. Can't ...

    I have had my Lumia for 10 days and for the second time it crashes during the night and the next morning I was not able to turn it on using the power button. I had to do a soft reset... The alarm that I set to wake me up never started... This means that I cannot trust my phone for waking me up in the morning! This is unacceptable!

     There is a possible alternative to the flashing or reset suggestet by the care point.
    As the problem only started recently, there is a high probability that it is caused by a bad app or setting or the combination of the two. The alternative is to reverse whatever apps you installed or settings you changed just before this problem started.
    The flashing is just an easy way out because it reverts the phone back to its out of the box condition. However, you may find yourself in the same situation again should you install the same app or make the same setting changes after the flashing.
    I had a similar problem with one app but I managed to isolate it and the problem disappeared after I uninstalled the app. The app was pulled subsequently and updated by the developer and is now working fine on my phone.

  • IPad turns on itself and turns on WiFi after both shut down especially during the night

    This happens to all my Apple devices, 3 months new MacBookPro, iPad mini, and iPhone. I shut things down when I am not using it, and I turn my phone off too. But, in the past couple of months, there are many times when I go to use my devices, especially the MacBookPro and iPad, they are turned on who knows when and how, remotely by someone or backdoor, and hooked on this website via WiFi: mzstatic.com.
    Does Apple secretly collect user data? Is there back door preplanted into the system?
    How can the devices turn them selves on after being completely shut down? and turns the WiFi on (I turn the WiFi off from the settings panel, not just the top tool bar), and hook themselves to this specific site? My security software shows this site belongs to Apple.
    Please explain how this could happen again and again, no matter how completely you shut them down? Why it only happens when I am not using it,especially during the nights when I am sleeping?
    <Edited By Host>

    Is your battery dead or alive?
    If the battery is dead, we must find out if it is:
    1. Charger problem
    2. Cable problem
    3. Docking port problem
    4. Wall socket problem

  • I have recently got a new replacement iPhone 4.  since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening

    I have recently got a new replacement iPhone 4.  Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening?  Some nights the usage is 150 meg!

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

  • The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

    I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

    HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
    I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
    As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
    For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

  • Why multi day events are shown only on the first day in calendar (in month view)

    Why multi day events are shown only on the first day in calendar (in month view)?

    Figured it out - the event has to be marked as full day event in order to be shown in monthly calendar. Disregard my question.

  • Do not execute job during the night

    Hallo everybody!
    I have a background job that runs every 10 minutes.
    I don't want it to run during the night. Is it possible?
    Thank you very much indeed.
                 Mick

    This may be helpful to you: 'At Operation mode' while giving start condition. Sap documentation says:
    Operation Mode
    Procedure
    You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
    Examples
    Normal operation
    Night operation
    You may have to  configure this operation mode in SPRO according to your requirement.
    Thanks,
    Priyanka

  • Can you block syncing of email during the night?

    Is there a setting that block syncing during the night? Some time setting that you can put in a beginning and ending time to sync every day?

    Sure this works, but it isn't exactly practical. To have push e-mail daytime but not at night you'd have to remember to activate/deactivate the feature twice a day.
    Wouldn't it be nice if you had a settings pane where you could specify at which times you want push and not?

  • My Mac turns itself on during the night?!

    I've noticed that my MBP seems to turn itself on during the night - I think around 1am. I've looked in the Energy Saver Schedule and there's nothing set up for it to come on.
    I'm a little confused as to what may be causing this. Any ideas would be much appreciated.

    Do you have eyeTV on your Mac? This is what I've found to be the cause of my Mac turning itself on at 1am every morning.
    If so, does your Mac turn itself on at a set time every day? If so, check what time that is in the Console. You'll need this so you can manually set your clock in order to test it all out.
    I then decided to delete all preferences with elgato in the name in both my Mac prefs and User prefs (make sure you have your eyeTV serial number as you'll need to enter this when you next start up eyeTV.
    Okay, then start up eyeTV and go through the whole process - just make sure you uncheck things that will be automatic i.e. channel listings etc.
    Then quit eyeTV and set your computer clock to just around 40 seconds before it turns your Mac on and then put it to sleep - if it doesn't wake up then great - if it does then you'll need to delete the elgato prefs from just your User prefs and start up eyeTv again - go into the prefs of the program and uncheck anything that appears automatic i.e. automatically check for updates etc
    Hopefully this'll work as it's worked for me - a bit of a pain but a least I no longer get woken up with the famous Mac BOOOONNNGGGG

  • My iPhone 4S went dead during the night.

    During the night my iPhone 4S went dead and the screen was black. The bottons wouldn't answer on anything, so I readed on the net that I should hold down both bottons and make a restart. This worked and the iPhone started up with 60% battery level. Why???

    i got my new ipone 4s yesterday afternoon, played a little bit. then in the evening went to completely dead after i put in to my pockeckt for 10 mins. no reaction even with power plugged in. I was able to recharge it this morning (plugged in and see the charging icon).
    this afternoon (the 2nd day) I sent a message and left it on the table for a few mins, did not get the msg back then relized it went dead again. my friend did a reset for me and saw the battery has 65% left..

  • My phone made random calls during the night

    I plugged in my phone as always for the night to charge.  When I woke up, the screen was magnified and my daughter said I had called her numerous times during the night.  My recent calls list showed multiple calls to her cell phone, to her work, and to her by face time.  How was this possible?  Also had a draft of an email started with all random letters typed in.  What is going on and how do i fix this?

    I did the hard reset as you suggested.  Last night I completely turned off my phone.  I woke up this morning and when I turned on my phone, this is what was on it: 
    Then I had to restart my phone to get it back up and working normal.
    Starting to believe the phone is possessed!

  • Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

    Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

    BTW, statements like
    "Use the device until the battery has drained to the point of self-shutdown. Basically, use it until it turns itself off."
    in articles like the one at http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/ are complete BS and if you do follow their "advice", your battery life will be severely hampered. Particularly if you also follow one of the comments: "Step One.One: Leave the device for 5+ hours before start charging. This will fully drain the battery." Well, the guy that advised the latter certanly doesn't know anyhting about lithium batteries and the damage deep discharging does to them.
    Again, what the article (and the above-cited comment) advices is complete b*llsh*t and noone should really do this.

Maybe you are looking for

  • Disp+work.EXE Dispatcher Stopped  - error

    Hi Experts, When I starting the SAP Solution Manager  / WINDOWS 2003 Server x64, In SAPMMC Console, disp+work.exe process shows an error, it not display a error, but simply donu00B4t start (donu00B4t show the green semaphore but instead it show the g

  • Ideas for HELP sizing a background menu photo in iDVD6

    Hey gang. I'm authoring in iDVD6 and have a photo with DVD credits that I want to display as a menu background. iDVD6 tells you to size your photos for NTSC 4:3 at 720 x 540 pixels. However, when I drop it onto the menu, it automatically enlarges the

  • Issue when trying to deploy Monitoring Server Reports on Deployment Wizard

    Hi all. I have to install the Monitoring Server Role on a server that already has the Lync Server 2010 up and running. I'm new to Lync Server so my experience with the product is limited, so I need some help with an issue. I followed the Deployment G

  • E-commerce software

    hello i am soon to start a site for a friend, who owns their own shop. they want to sell their products on line. can anyone recommend an e-commerce plug in? i don't want the site to be hosted by them, or use their templates. i just want a checkout, c

  • Organizational Model Hierarchy

    Hi Guy,   I have created the Organizational Unit, but i am not able to assign the hierarchy for the organizational unit.   Could any one please let me know how can assign the superior for the organzational unit? Thanks and Regards, Gopi.