Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

Hi,
Why does this error exists when Admin2 loads same file but loads ok for Admin1?
A u201CCalendaru201D column in a flat file has value 200810 i.e. October of 2008.
BW Admin 1:
When Admin1 loads this file, it comes out ok as Calendar Year/Month as 200810 in PSA and the load completes without any error.
BW Admin 2:
Now, for the same file, when Admin 2 loads (on his laptop), the load fails and gets the message that, ".... 00810 is not plausible..."
Somehow, it drops the initial 2 from 200810 during the load for Admin 2.
The suspicion was that Admin 1 had as Default in SU3,
Date format: YYYY/MM/DD.
Admin 2 therefore switched his to the same Date format: YYYY/MM/DD.
Yet, the described load problem still exists.
Any suggestions?
Thanks

Hi,
Yes, it is the same infopackage for the same cube, Admin 1 used to do this load, and is now moving on to a different project, so the only difference is that Admin 2 is now doing the same job from his workstation but everything on the Data Flow is the same.
In fact, Admin 2 went to Admin 1, after forwarding the .csv file and on Admin 2's workstation, the same file was tested by Admin 2, using the same infopackage, and it loaded without the above problem for Admin 2.
Thanks

Similar Messages

Error message when copying a music file from PC to BB

I get the following error message when copying a music file. Also I cannot delete any files.
"Cannot copy. The request could not be performed because of an I/O device error."

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..." - is there a way to overcome this error?

I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
Jyh-Jiun Liou

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

Hi Stacy ,
Please refer to the following link to get details and solutions about Adobe Download Assistant .Please see if that fixes the issue.
https://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Regards
Sukrit Dhingra

Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
LabVIEW 2011

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

"Unknown Error Occured" when opening any Illustrator file

Hi.
When trying to open a .ai file, the "unkown error occured" message appears.. Same happens when creating a new file. It's CS4.. Really don't know what else to say, hope you can help me.

iTolmach,
You may try to Ctrl/Cmd+Alt/Option+Shift during startup or Move the folder with Illy closed.
If it is not something in the Adobe Illustrator CS4 Settings folder, it may be (with tests):
1. Corrupt font(s): you may move all fonts out of the Windows fonts folder (and move them back in);
2. Firewall interference (especially if more than one is running (XP SP2 adds one if activated)): you may turn them off (and on again);
3. Some versions of Acrobat generate many temp files. Too many (64K) causes the problem: you may search and destroy Temp files;
4. Some other inconsistency caused by Adobe Acrobat/Reader: you may try uninstalling and reinstalling (a newer version).
5. Incompatible/old printer definition file for the default printer: you may upgrade the driver, change the default, or set the PostScript driver/PDF to default;
6. Using a US/English version of Illustrator with Windows set to a different language: you may enter Control Panel>Regional and Language Setteings and change to English (and change back).
7. Quicktime/iTunes: uninstall Quicktime and make sure the Quicktime folder is deleted in the Program Files folder; and/or uninstall iTunes.
If none of these possible solutions work, have you made any (other) changes to the PC between succes and failure? New software loaded?
In the end, you may have to rebuild. In that case, remember to use the Cleanup: http://www.adobe.com/support/contact/cs4clean.html

Files Already Exist when Reconnecting Presumably Missing Files

I am struggling to clean-up several hundred files in my PSE organizer database.
Whenever I run the reconnect all command (or any other command that requires reconnecting first), PSE locates a large group of presumably missing files. PSE's "Reconnect Missing Files" dialogue shows me the former location of the files. I browse to that location and find the files still there. I then select the file and press reconnect. Unfortunately, I then get an error that says "The file already exists in the catalog." This clears the missing file problem for the moment. However, when I run another missing file check, it will again find these same files. I have attempted to reconnect them several times but PSE continues to tell me that they need to be reconnected but still knows where the files are.
I have already run a database repair (no errors were found).
I also ran a database optimization without issue.
Some system information:
Win7 Home Premium Service Pack 1
Dell XPS i7 Computer
6gb RAM. >350gb of free hard disk space
PSE 12....but also had the same problem on PSE 11. I upgraded hoping that the problem would be solved. It wasn't.
Thanks for any assistance in clearing this problem for me.
-Bruce

I solved my own problem...although I do not know what caused it nor why Adobe's program didn't fix it for me.
The "missing" entries that were being highlighted were all duplicate entries. Adobe won't allow for a duplicate entry to the same physical file. I deleted all the offending entries and this cleared my problem. I hope this solution helps others.
-Bruce

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

Photoshop CS6 and PS CC error message when trying to open file

The following error occurs when I try to open a file from Bridge of Windows Explore:
"The procedure entry point
?ProposeSearchBounds@StructuralImageEditing@@YA?AVBox@I@EA
BV?$point2_J@gil@boost@@AEBV21@M@Z could not be located in
the dynamic link library PatchMatch.dll"
This started happening latge in the day recently and usually a reboot solved the problem
but i am getting this every time I try open an image. What is the problerm and what are
the solutions?
Thank you john

Just thought I would update. I reinstalled PS CS6 since I had the disk available and the error message did not come back. I then launched Bridge CC and I was able to launch from Bridge without the error message but the file opened in PS CS6 so I checked my file associations in Bridge CC and they were all set to CS6 (odd) but I changed the associations for jpeg and NEF to PS CC and I tried to launch the files. ERROR MESSAGE it is the same one as I noted in yesterdays message. Any suggestions?
When I did the reinstall of CS6 it was right over the top of PS CS6. Should I do the same with CC? How do I do that? Just download from Creative Cloud Manager?
Thanks
John

Error message when creating a Master File

I have finished editing a multicam clip of a graduation ceremony which is an hour and 27 minutes long. Clients are anxiously awaiting the DVDs/BR discs.
There are six "Rotation" and one "Ribbon" titles and 21 chapter markers in the timeline. None of the chapter markers are placed in a transition.
I'm using 10.0.8 FCPX and OS 10.6.8.
I've tried to create Master File in order to use Toast 11 titanium to make a Blu Ray disc but I've had the following message appear twice midway through the process:
The operation could not be completed because an error occurred when creating frame 152526 (error -1).
Any suggestions as to what I might do to resolve this will be greatly appreciated. Or is there is another method to create a Blu Ray disc, I'd appreciate info.
Thanks,
Gary

Go to Preferences and turn off Background Rendering.
Select your project in the library and in the File menu, click on Delete project Render Files; choose All when prompted. Select your event and do the same with the event Render files. In the project use the range tool to select a short section. Try to export that as a test. Don't render before you export.
If that doesn't work, copy the project and paste it into a fresh project. Try another export test.
If that doesn't work, create a new user account.
As for Blu Ray, there is a Share preset if want to check it out. Very simple menus. And the preset can only handle single tracks.
Good luck.
Russ

"Unknown Error" Message when saving Illutrator CS3 file

I get this unknown error message when attempting to save an illustrator file.(CS3). I tried to open and then save several files with the same resulting error message. As a work around, I have reverted to working in CS2 until I can get this resolved.

Chris -
Thanks for your quick response.
Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
Tom

Not enough memory error appears when i open ai files

My computer is powerful enough with 8GB ram,
After i edited about 20 ai files (open, edit and close), i got this error box (when i tried to open a new existing artwork)
So, what's the problem?
i have about 1TB free space in both C and D drive,
and memory is still free,
What's the solution?
How to increase the cache size?

Steel Shield
Connect session is a session where you will connect with me using Adobe Connect in a browser window (Chrome) and then you will be able to show/display your desktop to me. It will be like a live display of your screen to me.
Hope you got it.
Waiting for your reply.
Thanks & Regards,
Raghuveer

Error message when opening a .cp file (version issue?)

I am using Captivate 4.0 and exporting to a .swf file.
My project partner is using Captivate 3.0
I sent her my Captivate file to use as a template for our project and when she tries to open it, she gets an error message:
Adobe Captivate could not open "file.cp" because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)
I didn't send the file to her via email. I uploaded it to our shared server.
Any ideas?
As always, thank you in advance!
mon.mac

Sorry, but Captivate is not (and has never been) backwards compatible. In CP4 you can open a CP3-file, but it will be converted to the CP4-format (you get a warning message). You can not open a CP4-file in CP3. What is possible (but you have to install both versions CP3 and CP4) is copying slide per slide to an new, blank CP3 project.
No luck,
Lilybir

Error MDX when executing WBI query with different prompt but same text

Current version is BO XI 3.1 SP2 FP 2.6
Connected with SAP BI7
Identified problem :
when using same text prompt in different filters, only the first one is correctly answered, the MDX code for following ones are not correctly generated : the engine uses the right filter but applied to the object from the first filter which gives a MDX code error.
Example :
In a report :
- asking a user choice on 'document month' for operational view
- using the same answer to fill up the 'posting month' in financial view
Document month (0FISCPER) filter is filter !V000001
Posting month (FISCPLCD) filter is filter !V000002
Question text is unique : "Single Year Period ?" and should be sent to both prompts/variable.
When using the same text prompt, the MDX code generated is :
SELECT { [Measures].[4IUX93YJGXQEHGLX0T0GPNA9Y] } ON COLUMNS , NON EMPTY CROSSJOIN( [0FISCPER].[LEVEL01].MEMBERS, [FISCPLCD].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [CATS_M01A/ZGL_CATS_UTILISATION] SAP VARIABLES [!V000001] INCLUDING [FISCPLCD].[Z12010006]
Please notice that in this generated code, the filter !V000001 is applied to the FISCPLCD object, while filter !V000001 is related to document month. A MDX error is generated.
Any clue to solve this issue ?
Thank you for your help.
G.OM.
Edited by: GERALDINE OMNES on Jan 14, 2011 12:44 PM

Ok, I've simplified the case.
Here is the real case :
Object filter =
Based on object =
.[LEVEL01]
Object filter =
Based on object =
.[LEVEL01]
In WBI query result I take these objects :
.[LEVEL01]
.[LEVEL01]
.[4IUX93YJGXQEHGLX0T0GPNA9Y]
In query filters, my 2 filters with same text :
1.
I run the query.
Answer to question 'Single Year Period ?' = Period 06 2010
==> MDX error
A database error occured. The database error text is: Echec de l'exécution de la requête MDX SELECT { .[4IUX93YJGXQEHGLX0T0GPNA9Y] } ON COLUMNS , NON EMPTY CROSSJOIN( .[LEVEL01].MEMBERS, .[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM SAP VARIABLES INCLUDING .[Z12010006] INCLUDING .[Z12010006] avec l'erreur Invalid MDX command with . (WIS 10901)
And you can see that the value sent to both filters is the same and come from the first filter .[Z12010006] instead of applying the value to each filter .[Z12010006] for the first one and .[Z12010006] for the second one.
Please, notice that if I change the order of this 2 filters in the WBI query, the MDX generated become :
SELECT { .[4IUX93YJGXQEHGLX0T0GPNA9Y] } ON COLUMNS , NON EMPTY CROSSJOIN( .[LEVEL01].MEMBERS, .[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM SAP VARIABLES INCLUDING .[Z12010006] INCLUDING .[Z12010006]
Thanks for your help.
G.OM.

Error while running bulk load utility for account data with CSV file

Hi All,
I'm trying to run the bulk load utility for account data using CSV but i'm getting following error...
ERROR ==> The number of CSV files provided as input does not match with the number of account tables.
Thanks in advance........

Please check your child table.
http://docs.oracle.com/cd/E28389_01/doc.1111/e14309/bulkload.htm#CHDCGGDA
-kuldeep

Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

Similar Messages

Maybe you are looking for