[Error: exportArticleFolio] - What it means?

Good Afternoon.
I've been working on a folio, that, everytime I try to upload it, shows this error message. Nevertheless, even if a start a new folio, with the same elements, this message keeps showing. What does this mean? How can I fix it? I'm on a deadline, and I need this problem solved as soon as possible.
Thank you for your attention.

Do you get the error generating article from a specific InDesign document or any doc? If it is a specific InDesign document, are you able to provide us the document for further investigation? You may send me the document offline to [email protected] If you encounter the error for any Indesign doc, please send me the screenshot of your Folio Builder panel About dialog (In Folio Builder panel, select "About" from flyout menu).

Similar Messages

  • TS3694 cant restore my iphone has error 1015 what that means?

    how can i restore my iphone says error 1015 what this means?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694

  • Mac OS error -5001: what it means?

    Hi, I was burning a dvd DL with Toast Titanium 10 when, during the final writing, it comes this message: "Impossible to complete the command because of a Mac OS error. Result code = -5001". What is this? It's a problem of my mac, of toast or of the support (DVD)?

    That error, from MacErrors.h, is:
    afpAuthContinue = -5001, /* Further information required to complete AFPLogin call */
    Which indicates that there's a network call involved. See http://en.wikipedia.org/wiki/AppleFilingProtocol for details. Why you're getting it, I have no idea, but suggest that you check Toast's Help files or its user guide.

  • SAN Error. What it mean ?

    ****This is an automated message.  Do not reply****
    An alarm has occurred on EVA storage system: EVA4400 WWN: 5001-4380-04C9-9B30
    Alarm type: Hardware condition change
    Alarm description: Event Code: 0e030019 - 0," Battery module status change.");

    Not sure what does that means.
    I also get it weekly from my HP EVA P6400 array.
    So how did you go with it ?

  • TS1424 ERROR 1009:; what does mean?

    hi.my itunes appear this error ERROE CODE:1009 please help me

    Try iTunes: Advanced iTunes Store troubleshooting :
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.

    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\

    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\


    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

  • Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

    Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

    Yes, many know what this means.  You can too.  Just type in "error 1004" in the search box at the top of this page.  Or, just look to the right.  You'll find many links in the "More Like This" box. 
    Always good forum etiquette to search for previous posts on the topic before posting.

  • My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

    My imac is doing strange things:
    -delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
    -it gets stuck between things, the rainbow wheel appears and its just delays there forever....
    -and every now and then the mouse starts flickering and bouncing wildly onscreen.
    I ran the appel hardware test and it detected an error:
    4MOT/4/40000003:HDD-1233
    Does anybody know what that means? HELP!

    WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
    RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
    Hope you get it taken care of!

  • HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
    I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

  • I got a message while burning a CD.  "The Attempt to Burn the disc failed because of medium write error"..what does this mean?

    i got this message while buring a CD on itunes.   "The Attemp to burn the disc failed because of medium write error"..what do you make of this?
    i think the CD was bad.   i took the machine to the Apple store and they said the Optical Drive was OK.   so it must be the CD's i'm using... i use Verbatim type.   let me know.

    'Mediium write error' means it failed to write to the disc - some makes work better than others and you may just have hit a single bad disc or maybe your burner doesn't like the make of disc. I've always had good results with TDK.

  • While saving PO the error in message is &5&6&7&8? What it means?

    Hi All,
    While saving PO the error in message is &5&6&7&8? What it means?
    I am working with the US Tax procedure TAXUSJ.
    I saved the purchase order without giving the tax code and with jurisdiction in PO, Incompletion populated as above message and after save po number end up with message termination with following message.
    Error Info...   FF 718: Tax code & does not exist for jurisdiction code &
    Can any body suggest me to fix this problem.
    Thanks in Advance,
    Lawrence Reddy.

    Hi,
    First check in t.code:OX10, jurisdiction code TAXUSJ is assigned to your plant or not, if not assign it and save.
    Now use t.code: OBCL & assign your tax code {see tax code must be input tax} with jurisdiction code TAXUSJ to your company code and save.
    Now try creating PO.
    NOTE:
    Also check all t.codes with assignments:
    1.OBBG,
    2.OBCO,
    3.OBYZ,
    4.OBCN,.
    Regards,
    Biju K

  • My iCloud is not syncing between my mac and my iPhone and shows the following error message CoreDAVHTTPStatusErrorDomain error 501. what does this mean?!

    I have recently upgraded to an iphone 5S 4G and also updated my mac with the latest software so that i can use the icloud to back up all my stuff. It doesn't seem to be working with my contacts at all and recently added ones are disappearing, old ones are duplicating etc. The contacts icloud has the following error message CoreDAVHTTPStatusErrorDomain error 501. and I have no idea what it means. Can anyone help?

    I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
    You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
    If this doesn't work, I would look into your anti-virus' settings. Good Luck!

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • I am getting an "error -5000" message when I try to backup my iphone 4 to itunes.  Any ideas what this means?

    i am getting an "error -5000" message when I try to backup my iphone 4 to itunes.  Any ideas what this means?

    Take a look at this link, http://support.apple.com/kb/ts1424

  • When backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine

    when backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine

    Expect to see this error again due to a bug in Lion (and Mountain Lion).
    See # C17 in Pondini's excellent support document below, or look over to the right of this web page under the heading of More Like This
    http://pondini.org/TM/Troubleshooting.html

  • Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

    Hi all,
    My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

Maybe you are looking for

  • ITunes accepts password for initial login but not for Match, account information or automatic downloads

    Hello all, I have an iMac with 2.0 Ghz core duo running Snow Leopard 10.6.8 and the latest iTunes 10.5.1.  iTunes will accept my initial login for purchases and access to the iTunes Store.  But if I attempt to access my account information, enable au

  • How do I reload ACR 5.2

    Need to modify CS5 to read Panasonic AWR-2 raw files. Downloaded file and instructions. Could not move old file in LIbrary/applicationsupport/Adobe/CS5/file formats so renamed it. Exactly how much of library file has to be removed-part after CS5? Whe

  • [HELP] [N8] Share a picture from "Picture" app

    Hello, I have the Nokia N8, since last week i could not send a picture to facebook from Picture application or just after a photo taken with the Camera application. There were 3 shortcuts "Share via Social Network", "Delete" and "Send", now i have "S

  • I just down/up loaded the new IOS and have been have major PROBLEMS

    So I just downloaded IOS-the new one last night. And loved the new layout instantly. One thing that Wont work and has been really bugging me-is the fact that this new update *****! See when I downloaded some more purchased songs that I had had to del

  • Dynamic generated list of available skinClasses/Classes

    Hi everyone, i searching for a way in Actionscript to generate automatic a Array of all available/included skinClasses/Classes/Packages at runtime. Do you have any idea or seen something going to this direction?