Error exporting NFS, not supported by fstype "hfs" (readdir), how to fix?
Hi there!
I went in single user mode on my server and did a "fsck -fy /" (old linux habit of putting the slash there).
When I rebooted, I was not able to export using NFS and received this error in the logs.
14/05/11 11:57:55 AM /sbin/nfsd[6056] exports:8: kernel export registration failed: NFS exporting not supported by fstype "hfs" (readdir)
How can I fix this? I'd prefer not to format and reinstall...
I brought back /etc/sysctl.conf to default values, the problem is still there.
I tried to export a share from an other disk, the problem was there also.
I reinstalled 10.6.7 combo update + security update, problem is still there.
I don't know where to look anymore.
Similar Messages
-
Panasonic tz60 raw not supported in Aperture 3. How to fix?
can anyone help me?
panasonic tz60 raw not supported in Aperture 3. How to fix?
Aperture's raw support is camera specific. The list of currently supported cameras is here:
Apple - Aperture - Technical Specifications - RAW Support
Apple focusses on cameras, that are most likely used by professionals. Your camera is an excellent camera, and I wish I had it, but so far none of the cameras in the Panasonic Lumix tz-family have been supported in Aperture. So send feedback to Apple, that you want this camera to be supported. You can use this form for a feature request: Apple - Aperture - Feedback
To be able to use your raw files in Aperture, you could try a few work-arounds:
Use the software, that came with your camera, to convert the files to another lossless format, eg. TIFF.
Or do, what I am doing with the raws from my Lumix FZ28 - download the free Adobe DNG converter and convert your RAWS to DNG format: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh, I don't know, if that will work for your tz60 files, but give it a try.
If you have hopes, that Apple will support the camera soon, shoot RAW&JPEG for the time being, and work with the JPEGs, until hopefully the raw support will be released.
-- Léonie -
Epson SX218 doesn't print (client-error-document-format-not-supported)
Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart -
Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?
Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.
-
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support -
Error "Protocol [REMOTE_JDBC] not supported." while logging WORKSPACE ADMIN
Hi All,
I am trying the create a seperate domain for workspace admin, which is deployed in the Weblogic server. When I try to login, I get the error "Protocol [REMOTE_JDBC] not supported".
Am I missing some configuration?
Thanks in advance.
Regards,
Manohar ChhapoliaHi,
Is this this is the first project you've deployed on an Engine you've just installed? Knowing this will help us understand if you have a problem in one of the external resources in your project or if you had a problem caused by the installation.
If this is a new Engine, did you use the installation wizard that comes with Oracle BPM 10g? How did you answer the database information for the Directory Service and the Engine? Did you allow the wizard to create a new J2EE domain or did you try to use an existing one (I struggle using the wizard using an existing domain during the installation and get a similar error when I do so)?
Thanks,
Dan -
Fatal error: Client does not support authentication protocol
requested by server; consider upgrading MySQL client in
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on line 9
This is the error that comes up on the server where the site
sits. The database is working on my local machine with the local
settings, but wont connect due to the above.
I think im using MySQL client 3.23 How do i upgrade?
I found this on MySQL site:
http://dev.mysql.com/doc/refman/5.0/en/old-client.html
I'm not sure how to edit the connection string to make it
accept the vaules.The_FedEx_Guy wrote:
> Fatal error: Client does not support authentication
protocol requested by
> server; consider upgrading MySQL client in
>
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on
> line 9
> I think im using MySQL client 3.23 How do i upgrade?
The MySQL client that the error refers to isn't the version
of MySQL,
but the MySQL library bundled with PHP. It sounds as though
your hosting
company has upgraded to MySQL 4.1 or higher, but is still
using PHP 4.
> I'm not sure how to edit the connection string to make
it accept the vaules.
You can't. It's the way that the user account passwords are
stored in
MySQL. You need to get the hosting company to upgrade to PHP
5 or to
reset the passwords in MySQL using the OLD_PASSWORD()
function. This
needs to be done by someone with top-level administrative
privileges on
the database.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Linux AMD64: Error: hotspot VM not supported
I have installed JDeveloper 10.1.3.1 on an AMD64 Linux (gentoo) as well as Sun's JDK 1.5.0.10. When I try to start jdev I get the following messages:
$ jdev
u01/oracle/product/jdev/jdev/bin
Oracle JDeveloper 10g 10.1.3.1
Copyright 1997, 2006 Oracle. All Rights Reserved
Error: hotspot VM not supported
Error: JDeveloper can't recognize the JDK version
I have found that I can make jdev start up if I edit /opt/sun-jdk-1.5.0.10/jre/lib/amd64/jvm.cfg and change the line saying:
-hotspot ERROR
to:
-hotsport IGNORE
- but according to documentation in other places I am supposed to be able to use the HotSpot VM. How do I get this to work?Have you seen this 10.1.3.1 with Fedora Core 5 and AMD 64 post? It seems to indicate that the 64 bit JVM hotspot may not work.
John -
Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.
Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again. -
When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@
Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
IPhone error "Charging is not supported with this accessory"
I keep getting error "Charging is not supported with this accessory" ever since the last update. I only get this message when iphone is locked and not plugged in to anything. When phone is locked the message keeps popping up every few seconds, consiquently I'm having to charge at least twice a day!
Error only occurs when not plugged in & iphone locked & doesn't make any difference if wifi on or off
Connectors have been cleaned
iphone has been restored
iphone has been re-booted
Nothing seems to work and after researching, all similar posts seem to be pertaining to actually plugging in to something and the fix was "clean connector" this is not my problem, error only happens if not plugged in. I'm assuming it's a bug from the last update but my girlfriends iphone is fine.
Would someone please help as the drain on my phone is rediculous now, it wasn't that good to start with but now the phone is pretty useless unless I'm near a plug! It's also very annoying having the screen constantly coming to life with this error message, especially at night.
Thanks in advance for any help.
Wayne.I've not been able to find any new solutions so I thought I would try repeating everything I've tried again. I started by re-cleaning the connector as, logically my error only occurs when not plugged in to anything. To my amazement the problem is now resolved, I did take quite a while cleaning this time using toothpicks, cotton buds and nail varnish remover. So I geuss I should have cleaned it better in the first place! Doh! Anyway it's FIXED!!
-
Error: Driver does not support this function
Hi there people!
I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
<%@ page import = "java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<HTML>
<title>Stock Portfolio</title>
<body>
<body bgcolor="gray"><center>
<table border = 1>
<tr>
<td><th>Symbol</td></th>
<td><th>Type of Transaction</td></th>
<td><th>Date</td></th>
<td><th>Shares</td></th>
<td><th>Price</td></th>
<td><th>Stock Commission</td></th>
<td><th>Stock Brocker Name</td></th>
<tr>
<% String symbol = request.getParameter("symbol");
String type = request.getParameter("type");
String date = request.getParameter("date");
String shares = request.getParameter("shares");
int ishares = Integer.parseInt(shares);
String price = request.getParameter("price");
float fprice = Float.parseFloat(price);
String commission = request.getParameter("commission");
float fcommission = Float.parseFloat(commission);
String bname = request.getParameter("bname");
%>
<% String url ="jdbc:odbc:Product";
try
{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection(url,"","");
String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
PreparedStatement pstmt = con.prepareStatement(query);
pstmt.setString(1,symbol);
pstmt.setString(2,type);
pstmt.setString(3,date);
pstmt.setInt(4,ishares);
pstmt.setDouble(5,fprice);
pstmt.setDouble(6,fcommission);
pstmt.setString(7,bname);
pstmt.executeUpdate(query);
}catch (Exception e)
{System.out.println(e.getMessage());
%>
</body>
</html> Thanks!Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
[http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
Read reply #5.
It says
You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck. -
Error: native VM not supported
Hi
I have just run the blackbox application in the javacomms API download:
1) I invoked it using the prescribed command java -native blackbox to which I got the error native VM not supported.
2) I then ran it again without the -native switch and got the error Exception in thread "main" java.lang.NoClassDefFoundError: blackbox.
Can anyone help please? Is there something I have not installed correctly? I am using Windows XP professional service pack 1.
Thanks
Chris Wilsonjava.lang.NoClassDefFoundErrorThat always means that either your classpath is wrong or that isn't the name of the class.
-
CU upgrade error; [ERROR] Save() is not supported on a read-only object.
Hi All,
When we try to update or Exchange 2013 CU3 environment to CU7 we get some errors when we try to prepare ad.
It fails at 98% with an error:
[2] [ERROR] Save() is not supported on a read-only object.
[2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Save() is not supported on a read-only object.
We have checked all the security settings with our test environment where it is working. Running command prompt as an admin and we have all necessary domain rights. Also checked alle the objects with Adsi edit, but no difference with our test environment.
Exchange error log:
[03/18/2015 20:17:47.0096] [2] Used domain controller <FQDN> to read object CN=Exchange Servers,OU=Microsoft Exchange Security Groups,DC=prod,DC=local.
[03/18/2015 20:17:47.0096] [2] Used domain controller <FQDN> to read object CN=Exchange Servers,OU=Microsoft Exchange Security Groups,DC=prod,DC=local.
[03/18/2015 20:17:47.0096] [2] [ERROR] Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0096] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0962] [1] The following 1 error(s) occurred during task execution:
[03/18/2015 20:17:47.0962] [1] 0. ErrorRecord: Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0962] [1] 0. ErrorRecord: System.InvalidOperationException: Save() is not supported on a read-only object.
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Tasks.InitializeDomainPermissions.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__8()
at Microsoft.Exchange.Configuration.Core.LatencyTrackerExtension.StartAndEndInternalTracking(LatencyTracker latencyTracker, String groupName, String funcName, Boolean logDetailsAlways, Action action)
at Microsoft.Exchange.Configuration.Core.CmdletLatencyTracker.StartAndEndInternalTracking(Guid cmdletUniqueId, String groupName, String funcName, Boolean logDetailsAlways, Action action)
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__7()
at Microsoft.Exchange.Configuration.Core.LatencyTrackerExtension.StartAndEndInternalTracking(LatencyTracker latencyTracker, String groupName, String funcName, Boolean logDetailsAlways, Action action)
at Microsoft.Exchange.Configuration.Core.CmdletLatencyTracker.StartAndEndInternalTracking(Guid cmdletUniqueId, String groupName, String funcName, Boolean logDetailsAlways, Action action)
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
Thanks!
Regards, RaymondHello,
Please check the current schema version:
https://support.microsoft.com/en-us/kb/558112?wa=wsignin1.0
Try updating the schema by the following command:
Setup.exe /PrepareSchema
https://technet.microsoft.com/en-us/library/bb125224(v=exchg.150).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Maybe you are looking for
-
I don't want any discussion. I want a resolution of my issue. I am logged in from my iPad into Creat
I am logged into Creative Cloud from my iPad and there is not an option for me to download iPad touch apps. Why? Message was edited by: Elena Sanjara
-
Has anyone been able to share or access a shared scanner in Yosemite?
I've tried using Yosemite and Snow Leopard running on iMacs as hosts for the scanner in our office, but neither appears to be working. Here's the situation: iMac running Snow Leopard: 10.6.8, Epson Scanner 10000XL via USB/FireWire (either), shared vi
-
i am sending report report 6.0, here how to mention the subject, because there is no any parameter, where i can write the 'subject'. because if i am sending the report in background it is automatically wrinting the subject "report send through report
-
Lync 2013 - re-connecting is un-muting microphone, is that a bug or a feature?
Every time Lync 2013 re-connects (very often sadly) the microphone is un-muted. Is that a bug or a feature? I'm using a Plantronics Voyager UC headset (Lync certified), doesn't know if it happens with others too. Please advise if there's a solution,
-
Extract information from website
i need to write a program to read the latest stock information from some websites,then summarise the information to generate some reports in my final year project. It is because the format of these websites may be changed , so it is difficult to extr