Error exporting NUMBER RANGE DEFINITION

Hello and HAPPY NEW YEAR,
I have made a Number Range Definition object but I cannot export it through the transport system, this what I can see in the transport system:
S17K900461    Autonumbers for DPM Demand file          04.01.2007 2:49
5 S17 Company Test System
4 ADO export                04.01.2007 22:50:47 Cancelled             (12)
            Export                    04.01.2007 23:20:40 Not yet executed
Export application-defined objects
Transport request___: S17K900461
System______________: S17
tp path             : tp
Version and Release: 252.08.34 40B
R3OB NROB ZISPDMNUM were exported
Program terminated. See long text (job: RDDDIC0L, no.: 22495801)
    See job log
Time... 22:50:47       Run time... 00:00:00
Export application-defined objects
End date and time___: 20070104225047
Ended with return code: ===> 12 <===
Also in the log file in unix you can see the error:
START EXPORT OF S17 X      20070104100830        s17adm       athens
START tp_getprot S17        20070104100830              s17adm       athens
ERROR S17K900433 S17 X 0012 20070104100921 EKEKAKOS     s17adm       athens
STOP tp_getprot S17        20070104100931              s17adm       athens
STOP EXPORT OF S17 X      20070104100931         s17adm       athens
ERROR: stopping on error 12 during EXPORT OF SELFDEFINED OBJECTS
Also all the backround jobs of RDDDIC0L,RDDIMPDP of all users (DDIC and me) in all clients are terminated without any log.
Can someone help me on this serious problem?
Thanks in advance

Hi,
for 1) there is a solution for sure. What you are looking for is "early number assignment"
Customizing -> ... -> Change Request Management -> "Define Transaction Types"
Double click your transaction type and uncheck "Early No. Assgt."
For 2), never tried alpha numeric but it should work. You need to define your own number ranges and assign them to your transaction type. Re-assign to numeric ones after testing is done.
Number Range object is CRM_SERVIC
Regards

Similar Messages

Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

ERROR in number range in F-02, FB60 and all fininace postings

HI All
could you please help us on this issue , ERROR in number range got this error while posting all FI related , we cant able to post documents we are in ready for SIT but in unit testing got this error .
we don't have any clue , kindly share your experiance on this

Hi Murthi,
Please check through T Code FBN1 whether you have maintained correct number range for Document type (Check document type in OBA7 and see what number range is maintained) you are posting in that particular company code and fiscal year.
If not maintained please maintain the same. It will solve your problem.
Also you can click on question mark tab in yellow and see the details of error. You can also get the information of error and solution.
Regards,
Pankaj Singh

SAP CRM Error: A number range is not assigned to account group

Hi Experts,
We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
Request you quick response.
Thanks,
Chaudh.

HI Chaudh,
I am facing similiar issue. When i am creating BP in CRM WebUI, I am getting an error message: "Error in Transporting Number Range".
Could you please share your findings, how you solved your issue?
Dave

BDOC Error: A number range is not assigned to account group Sold-to party

Hi Experts,
We have a stuck BDOC for a BP with "ZEmployee" (custom) role in CRM with error as "Fill in Required fields". We knew this is b'cos one of the mandatory field in not maintained in CRM. After maintaining the mandatory field in CRM; we are re-processing the stuck BDOC and again it is getting into the error message with error "A number range is not assigned to account group Sold-to party".
We have checked the number range and grouping configuration both in ECC and CRM. But still not able to identify the gaps. Is there a detailed step-by-step approach which can be taken up to resolve the issue.
Request you quick response.
Thanks,
Chaudh.

Hi Chaudh,
Please find the exact solution here.
http://wiki.sdn.sap.com/wiki/display/CRM/IssuesduringBusinessPartnerreplicationbetweenCRMandERP
Cheers,
Josh

Transport Error like Number Range Inteval for 0PRODID is missing

Hello
Iam transporting an infoobject to Quality and got an error like Number range interval for 0PRODID is missing.
But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
can you pls let me know what to do.

Hello prasanna
Check with your Infoobject 0PRODID in Quality has got the Number range available.
If not first generate the Number range or go with the RSRV run the test with Master and do the transport

Error in number range while testing inbound idoc via we19

hi all,
i have done all configurations but while testing the inbound idoc via we19 i am getting an error 'error in assigning number to idoc'..i checked and found that the number range object for idoc is edidoc in it number interval is defined from 1 to 99
i dont think that anything is wrong with the number object..
Can u tell me how dow i eliminate this error?

Increase Higher limit the reason is when you look at current idoc number ( This idoc number already exists ) ,it will not create new idoc number.
System will get the number from SNRO Based on IDOC Object.
Just look at EDIDC and see the current idoc number.
Simple example :
I have one number - 100 ,it is already exists in database,if i insert same record to the database ,did system will accept ?
Thanks
Seshu

Error regarding Number ranges in MIRO

Guys
Iam getting the following error while am assigning
MIRO can u please suggest me a solution for getting rid
of this error
In FBN1 am trying assign 51 for my company but it says
tat the number overlapps....what shall i do for the following
problems...
*Error*
In company code JNNO, the number range 51 is missing for the year 2008
Message no. F5150

This happens when
Existing Number Range number for ur Company code
No.                    21
From Number     5100000000
To Number         5299999999
If you are trying to add 51 with the number range as shown below
No.                    51
From Number     5200000000
To Number         5259999999
This happens bcos the from number and to number assigned to 51 falls in the from number and to number of 21.
In such cases you will get the message as what you are getting now.
So try assigning a different from number and to number for 51.
Hope this helps.
Thanks,
Balaji

Error in Number Range

Hi;
I am facing a problem while trying to create a new number range ZT, with values 1350T to 1488T, through transaction XDN1. An error message which appear is "Enter interval without overlap". It says that the number range is overlapping with existing range no. P8 - 1000000000 to 1999999999. Now, ZT will be an external no. range and P8 is an internal no. range and also, as you can see, the numbers are not ovelapping. So, I cannot see where the overlap is. I would be very greatfu if anyone can give me any insights into it.
Regards;
Sumanta

Hi,
I got your problem. It is not because of Number range PB.
See, the problem is that when you define the number range ZT, there might be a number range already existing which is alphanumeric (May be XX A ZZZZZZZZZZ, which is standard).
since the ZT number range contains the alphabet T which is overlapped in XX number range, you can not again define the number range whith T.
Solution could be to delete the XX number range and then define these 2 number ranges i.e. PB and ZT.
At least you try it. I am sure that it will be done.
Wish you all the Best
Regards
K Khatri

ERROR IN NUMBER RANGE when doing profit center distribution

hi
iam getting this error while doing distribution in profit center accounting , can anyone help me with this
ERROR:
Diagnosis
An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object AUS2.
System Response
No document number was determined. Results could not be updated.

follow steps below:
1. go to tcode snro
2. input GL_LOCAL in the object field
3. push "number ranges" button
4. push "Groups"(maintain) button
5. select "V0" group, since I use Document type 'V0' during PCA distribution
6. push 'change' button
7. insert the year you want

Error in number range assignment

Hi,
When I try creating a process order, I get the below error : ERROR OCCURED IN NUMBER ASSIGNMENT FOR OBJECT RESB. There is no problem with the number range, i.e. number ranges are assigned to the order type. Any solution?
Regards,
Sakthy

Hi,
check table NRIV object RESB (which number range assigned, whats the highest number assigned) and compare it with table RESB. If the highest number in RESB is higher than the status in NRIV you know the reason for the message.
best regards, Christian

Error in number range when creating new material

Hi All,
We just recently changed the number range format of our material master. Earlier it was numerical and no it contains alphanumeric data.
To do the change, in the material type i selected the option "External Number Assignment w/o check".
Now i deselcted the option and tried to create a material with the old number range, it does not allow me to do so.It gives the error "Number 12345 not defined for Material Type".
What changes need to be done to allow numerical characters to be accepted?
Please advice.
Thanks,
Savindi

Hi All,
The issue seems to be that the number range has not got assigned to an element. When i try to assign an element, i get the following error-
NR020- The number range interval with number 01 must be internal
Please advice,
Thanks,
Savindi

Error in Number range object - URGENT

I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this prob

try attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps

Error in Number range objec

Hi all
I created a Number ranger object and using this number range object in my program to get number automatically.
The number starts from 1 as given in the number ranger interval but after 1 it skips 9 numbers and goes to 11,12, 13 so on.
why does this happen . how to resolve this issue.
In number range object I checked main memory buffering and given 10 for Numbers in buffer field.
Kindly help me resolve this issue.

Hi Eric
I removed the No of values in buffer and kept that field empty , but now it is jumping around 400 numbers . why does this happen.
Also let me know how to transport number range objects from DEV to QAS and then to PRD.
Does the number range interval also get carried as it is to QAS system on transporting the request? if yes then the current number will be the last number generated in DEV system . How to tackle this issue.
Thanks in advance for your help

Number range interval doesnot exists - error message while generating numbe

Hi Experts!,
                  I am getting error as " Number Range interval does not exists" while generating auto number for an custom defined tr cod
The prg is as followos:
INCLUDE MZFIRSTPAGETOP                          .    " global Data
TABLES: ZCHP_CUST_INFO.
DATA: OKCODE LIKE SY-UCOMM.
DATA:   CNAME LIKE ZCHP_CUST_INFO-CREATED_BY,
        REQTYP LIKE ZCHP_CUST_INFO-REQUEST_TYPE,
        DESC LIKE ZCHP_CUST_INFO-SHORT_TEXT,
        PRIO_TYPE LIKE ZCHP_CUST_INFO-PRIORITY_TYPE,
        EFFECTIVE_DATE like ZCHP_CUST_INFO-REQUIRED_STR_DAT,
        COMM_TYP like ZCHP_CUST_INFO-MODE_OF_COMM,
        COMM like ZCHP_CUST_INFO-ADDRESS,
        REQ_NUM LIKE ZCHP_CUST_INFO-REQ_NUM.
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'FOR1000'.
SET TITLEBAR '1000'.
ENDMODULE.                 " STATUS_0100 OUTPUT
INCLUDE MZFIRSTPAGEO01                          . " PBO-Modules     *
INCLUDE MZFIRSTPAGEI01                          . " PAI-Modules     *
INCLUDE MZFIRSTPAGEF01                          . " FORM-Routines   *
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
WHEN 'SUBMIT'.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = ' '
    OBJECT                        = 'ZREFNUM'
QUANTITY                      = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
NUMBER                        =
QUANTITY                      =
RETURNCODE                    =
EXCEPTIONS
INTERVAL_NOT_FOUND            = 1
NUMBER_RANGE_NOT_INTERN       = 2
OBJECT_NOT_FOUND              = 3
QUANTITY_IS_0                 = 4
QUANTITY_IS_NOT_1             = 5
INTERVAL_OVERFLOW             = 6
BUFFER_OVERFLOW               = 7
OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
        ZCHP_CUST_INFO-REQ_NUM = REQ_NUM.
        ZCHP_CUST_INFO-CREATED_BY = CNAME.
        ZCHP_CUST_INFO-REQUEST_TYPE = REQTYP.
        ZCHP_CUST_INFO-PRIORITY_TYPE = PRIO_TYPE.
        ZCHP_CUST_INFO-SHORT_TEXT = DESC.
        ZCHP_CUST_INFO-CREATED_ON = EFFECTIVE_DATE.
        ZCHP_CUST_INFO-MODE_OF_COMM = COMM_TYP.
        ZCHP_CUST_INFO-ADDRESS = COMM.
*ENDIF.
INSERT ZCHP_CUST_INFO.
COMMIT WORK.
WHEN 'RESET'.
       CLEAR: CNAME,REQTYP,PRIO_TYPE,
DESC,EFFECTIVE_DATE,COMM_TYP,COMM.
WHEN 'CANCEL'.
        LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
could any one help me out,.!!!
Thanks in advance.
Sunil
[email protected]

Hi,
I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
I hope this will make sense.
Panneer

Error exporting NUMBER RANGE DEFINITION

Similar Messages

Maybe you are looking for