Error exporting to Compressor

When I try to export sequence to compressor, I get the following error:
"File Error: A file of this name already exists"
There is not a duplicate of this file and I have made new projects and get the same result.

I'm having the same problem and this is really the first try at using compressor as I'm very unhappy with the DVD image quality I'm getting exporting to quicktime and then formatting in DVDSP. That's another topic. I am getting exactly the same error message and not being allowed to go to compressor after OKing the error dialogs. I'm getting two of them first the "filename already exists" one then under that, "section contains no media"
As I'm writing this I have come to a solution, I was recreating as I wrote and found that all these times I was either highlighting the canvas or the timeline, I had an epiphony and highlighted the sequence on the browser and low and behold compressor opened as it should. God knows it could have been this issue for all of us yet........maybe not, let's see how my export and formatting goes, maybe I'll finally learn how to make a high quality (to my eyes) DVD (fat chance)

Similar Messages

ERROR export to Compressor

When i try to export a sequence to Compressor, appear a mistake that say:
"FILE ERROR: A file of this name already exist".
What can i do?
See the missage in http://www.simbiolisi.com/3d_img/ERROR.jpg

You can try:
1. Re-name the clip slightly you're trying to encode
2. Re-boot the computer (this might clear a cache file)
3. Delete the Compressor plist file in user > library > preferences > compressor.plist. Delete the batch monitor plist as well.
jimi

Error msg when exporting to compressor

I have been trying to export to compressor and keep getting this error message. Can anyone help me plz. I'm using FCPX 10.0 & compressor 4.1

So this was resolved in a FCPX thread.
Russ

When I try to Export, I get an error code from compressor (-1)?

I have battled with this issue now for days and I dont know what else to do, I just recently installed the OSX Mavericks beta 2, however I do not think this is the problem
I am running a 2012 15" 2.6 i7 Quad Core, 8Gb ram MBP (With problem export problem)
I also have a 2011 iMac, 2.7 i5 Quad Core, 12Gb ram (no problems)
I have never had issues with FCPX like this before and It still runs perfectly other than the fact that EVERY single option under the SHARE toolbar is frozen.
It gives me an error code from compressor saying that it coudnt be sent to it (Compressor 4). I tried re-installing it and deleteing the preferences. I tried to trash the preferences in FCPX, I tried deleting all the render files, I tried shutting down FCPX and re-opening it many times, I checked for any damaged video/audio, and NOTHING has worked. Please Help

Where did this disk image come from? The application has no installer. It installs directly into the Applications folder from the App Store. Are you trying to run the application from the disk image?

I am trying to export a video I have made in FCP 10.0.8 to Youtube or to a master file and I keep on getting an error -50, or "error exporting master file at frame 20074" Any ideas?

Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine. I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing. Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error. It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in. Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
Any help would be much appreciated.
Gerry

Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry

Help needed!!! Exporting using compressor

Hi!
I´m exporting an animation using the option Export using compressor, since I have quite a few proyects to export. I do this in order to have a batch export. Everything goes all right, no errors or something strange, but whe i check the render file, the font that i´m using in the motion proyect has been substituted by another one.... WHY??????
thanks!

yup, I can confirm this problem -- you can't use a font that's activated using something like Suitcase Fusion -- I've tried double clicking the font and installed it into fontbook, no joy. I moved the font into my font library (root) and still no joy.
I'm using a TTF -- should I be using an OTF or bitmap font? It's StartlingFont.

Quicktime error 0 with compressor

Every time I try to export a sequence from FCP 5.0.2 using compressor I get an error when it tries to export the video saying "quicktime error 0" also when I try to export as a quicktime movie, I get a message saying "general error" im running compressor 2.0.1
any help is greatly appreciated
thanks
~jon

Udate: The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step. Its a mystery why I was getting the error when sending the render to Compressor from within FCPX.
Anyone else that has this issue, please share any solutions if you have them.

Exporting using Compressor

This seems to be the same problem others have had. I was able to export with Compressor yesterday, but September 12th seems to be error date with Compressor. When I export, from FCP Studio 5 to Compressor I get a " File error: A File of this name already exists". It will then open Compressor, start the export, then fail. I've trashed the FCP, Compressor and Quicken prefs. Any solitions? Me, like so many others, are baffled that this would happen.
Dual 2ghz PowerPC G5, 3.5 gb ddr sdram, FCP Studio 5

I've been plagued by this since day one, and tonight I found a solution! If you are using an antivirus software, disable it. Save your FCP file and quit FCP and Compressor. Re-open your FCP file and go to File>Export Using Compressor again and all will be well. There is a post on Apple's Support site about this. Here's the link:
http://docs.info.apple.com/article.html?artnum=303261
Hope this helps.

FCP CRASHES WHEN I EXPORT TO COMPRESSOR... Please help.

Hello everyone,
I'm trying to export my FCP sequence to compressor through FCP and not through a Self Contained Movie, because I hear it produces better results. I Export to compressor and Compressor loads the project and begins to compress... it gets through the audio, and I would guess 75% of the video and FCP crashes. I've tried to do this now 6 times with the same results.
My project is a Panasonic HD 720P and is about 32 minutes long. I don't know if that info will help, but does anyone have any suggestions?
Thanks guys, and gals...

hi,
i can only guess here as you have not provided any information about the crashing itself. Is it Unexpected Error, then a quit; is it a lock up without an error message?
Things to look for:
1. Check that the sequence is appropriate for the format you are editing... it is likely that it is as FCP auto checks it on first clip assemble. Check anyway.
2. Check that the media you are compressing is COMPLETE.. check each scene in the sequence.. sounds like you may have a dodgy scene/media. This would seem likely if you are experiencing crashing always at the same place during compression.
3. Check to see if you accidently put in any compression markers... take these ALL OUT if you dont need them
4. Check compressor.. compress a small file of the same format (different scenes) to check compressor is functioning. This also may help you narrow down your dodgy media if there is any.
Hope this is of some help.
Good Luck.

Compressor fails when using FCP "export to Compressor"

I have a 6-minute long, ProRes422 (HQ) project that I'm trying to export uncompressed.
I'm trying to avoid the typical "Export QuickTime Movie" function because I get awful gamma shift issues. The colors are washed out and the image just looks like complete garbage compared to what I'm seeing in my FCP canvas. When I export using Compressor, the issue is a lot less severe.
Now, when I export a small part of the project using Compressor at ProRes422 (HQ) settings--say, a few seconds or so--it exports just fine.
But when I try and export the entire sequence, things get wonky. It starts exporting and the progress bar churns along ... then the project bar goes blank and the time reads, "Unknown time remaining" ... then the progress bar starts again ... and then again, blank with "unknown time remaining." Finally it just gives up and says, "Failed."
I have no idea what's causing this problem--but I've tried exporting to ProRes422 (HQ) 6 different times, and it has failed every time. I've exported the same sequence to H264, using Compressor, with no problems at all.
Thoughts?

Hi chris, have u made any progress with this? If not, then it's worth trying to isolate the problems to transcode your distribution on compressor.app?
Questions:
1) Despite your reluctance :) , to export a master from FCPX as part of your workflow, does FCPX render the storylines (project) out completely? And .. Then...
2) does the project play back from within FCPX to your satisfaction?
If not then determination of issues should be directed to the elements , objects and effects n transforms you used for your FCPX project composition
Else, If 100% expectation from FCPX as a above, Then proceed to compressor And Qmaster problem determination.
As posted many times in this forum, a workflow involving a "send to compressor" from with FCPX etc, involves building a transient master to hand off to compressor.
It's possible that the compressor and Qmaster structures in your home directory are corrupt and it's very simple to fix.
And yes, FCPX CANNOT take advantage of a qmaster cluster when submission of the transcode is made directly from FCPX.... (Old news)
So..
Look in /var/logs (console.app) for any obvious errors as well.
Check out this thread for example.. 3rd or 4th post down...(there anew many similar procedures in these forums) ..
Preserve your settings and destinations from compressor if u have than Just clean out the Compressor and Qmaster structure... Reset Qmaster if u intend to use it.
https://discussions.apple.com/message/17356372#17356372#17356372#17356372
Hth
Post your results for others to see.
Warwick

Can't export to Compressor. "Selection contains no media"

I get a message that says "selection contains no media", but there is clearly media on the timeline that plays fine in the viewer. Other projects export fine and using quicktime conversion to export works fine too.

Pentent wrote:
Interesting. Losing the in and out points on the timeline solved the problem, but now what if I wish to just send a segment to compressor and not the entire sequence?
Exporting with in and out points works okay in other projects. I'm a bit confused.
Is the sequence in question not in your main browser tab? If you're someone who likes to, say, option-click bins to open them in tabs behind the main project tab - I like to do this - then is a known issue when attempting the Export > Using Compressor workflow. (Sequences exported this way must be in the main tab, not in a floating tab or tab behind the main tab).
I've never experienced this error in any other circumstance - I export Using Compressor all the time, with In and Out set, so that in-and-of itself isn't the exact cause...

Export Using Compressor from FCP fails every time

When I try to use the File>Export>Using Compressor command in FC Studio 2, everything seems normal until I submit the batch. But the job fails every time.
I get the following message: "Processing service request error: Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server".
I've gone through all the discussion stuff on how Compressor needs to be reinstalled and all that. That's not my problem here. Compressor will work fine if I use it standing alone. It's only if I try to use the FCP export that this problem occurs.

Compressor works fine as a stand alone when I import a Quicktime file. However, if I try to export a suquence directly from FCP, it gives me a message "File Error: A file of this name already exists". If I press okay it exports it to Compressor which gives me a message, "Can't preview movie Final Cup Pro App is busy".
Then when I go ahead and load the output settings into compressor ( actual compressor window shows the sequence as being loaded) it starts to render and then it stops with the following message logged
"Name: MPEG-2 6.2Mbps 2-pass
Time Elapsed: 0:00:00
Time Remaining: 0:00:00
Percent Complete: 100
Status: Failed - Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server"
Any ideas what the problem might be?
I am using a Mac Pro 8 core with 9gigs of ram and running tiger 10.4.10 and this is FCP Studio 2

Exporting via Compressor - submit - failed

When I use Export via Compressor - and I use QT Pro Res - and destination is Movies Folder, then submit - then in the History window it has returned "Failed" 3 times now. The status bar shows, but never any indication that it even starts to work its magic or anything - just after a few seconds, maybe a minute, the word Failed appears. Argh. The motn project is 5 minutes long full of stills and a little video with audio. Help - what am I doing wrong?
In looking thru this forum, I thot the best export would be QT ProRes - is that causing the failure?
I previously exported via QT(not compressor) and the resulting file is 10gb which doesn't run smoothly but jerks and hiccups like a pre-rendered file. And 10gb wont fit onto DVD which is where this project will go - as a gift.
help

I surely do not take it personal. I have learned that you folks in this group are the best resource I have. I know I am in way over my head. I truly do not know about codecs.
I have taken Motion directly in to FCP - but I didn't think it would work this time. I should have tried.
Someone came along at work and told me to use Visual Hub and use setting for mp4, and also try using the DV - ready for FCP - I did both. I really never think of it as wasted effort if I can learn by what I doing, and that is occurring as you are all explaining to me what I should be doing.
Now as for workflow - I think I did the right thing by starting with Motion, then with the big file sizes went to Visual Hub - but probably could have just gone to opening the Motion files in FCP - then rendering out for DVSP.
System settings are a boggle to me - so I just use NTSC - DV 720x480 and hope that works - so far the results in my projects are good.
Again, Thank you for taking time to explain - I appreciate all comments.

Error exporting report with sub report and parameters

Post Author: joncombe
CA Forum: JAVA
I am using the JRC to export to a PDF file a report that has a sub report within it. Both the main and subreport connect to an Oracle database via an Oracle ODBC connection and both share a single parameter, RUN_ID. I need to set a value for the parameter in both reports. If I don't do that I get this error:-com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Some parameters are missing valuesI have the following code to update the parameters in both reports. ParameterField thisParameter1 = new ParameterField ( ); ParameterField thisParameter2 = new ParameterField ( ); Values thisValue1 = new Values ( ); Values thisValue2 = new Values ( ); ParameterFieldDiscreteValue thisParamDV1= new ParameterFieldDiscreteValue(); ParameterFieldDiscreteValue thisParamDV2= new ParameterFieldDiscreteValue(); thisParameter1.setReportName(""); thisParameter2.setReportName("DQA_GER_Adressverification.rpt"); thisParameter1.setName("RUN_ID"); thisParameter2.setName("RUN_ID"); thisParameter1.setType(FieldValueType.numberField); thisParameter2.setType(FieldValueType.numberField); thisParamDV1.setValue(254); thisParamDV2.setValue(254); thisValue1.add(thisParamDV1); thisValue2.add(thisParamDV2); thisParameter1.setCurrentValues(thisValue1); thisParameter2.setCurrentValues(thisValue2); parameterFields.add(thisParameter1); parameterFields.add(thisParameter2); ReportStateInfo repStateInfo = new ReportStateInfo(); repStateInfo.setParameterFields(parameterFields); reqCont.setReportStateInfo(repStateInfo); With this code in place I have found that if I run using the JRC supplied with Crystal Reports for Eclipse I get the following error:-ERROR - QueryEngine error: verify database failed.ERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)ERROR - Failed to export reportcom.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unexpected exception thrown at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Caused by: java.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) ... 17 moreERROR - JRCAgent1 detected an exception: An error occured while exporting the report at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Error exporting report : report. Error is ReportSDKException: An error occured while exporting the reportAn error occured while exporting the reportcom.businessobjects.reports.sdk.d.byte(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) With the JRC supplied with Crystal Reports XIR2 I get this error:- INFO - PdfExporter: serializing pdf document and cleaning upINFO - Disk Exporter: verifying export to destinationERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)INFO - Disk Exporter: finalizing export to destinationERROR - JRCAgent1 detected an exception: java.lang.NullPointerException at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870) at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:811) at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1037) at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132) at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687) at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653) at com.crystaldecisions.reports.queryengine.driverImpl.o.ew(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.d4(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.dP(Unknown Source) at com.crystaldecisions.reports.queryengine.av.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.do(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.try(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.for(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.if(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.null(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.az(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)I believe the error is that the SQL query in the main report is being updated with the RUN_ID but the SQL in the sub-report is not. I am not sure why the update to set the RUN_ID in the second SQL query fails, but it seems to me the JRC is not detecting it as a missing parameter and is passing the SQL including {?RUN_ID} to Oracle, causing the JDBC driver to fail with this NullPointerException. I think this because further up in the log I see this:-INFO - Executing query: SELECT v.* FROM v_ger_main vwhere v.run_id = 254INFO - Verifying databaseINFO - Executing query: SELECT h.* FROM v_ger_av_ls_tagging hwhere h.run_id = {?RUN_ID}ERROR - QueryEngine error: verify database failed.Both connections are from the same database, but the first has the updated value (254) whilst the second query still seems to have the parameter and so fails to verify.Can someone suggest how I can fix this problem or if I have missed something that is required?Thanks.Jon.

Post Author: Ted Ueda
CA Forum: JAVA
What happens if, instead of passing in parameter field values, you pass the report source object to the viewer (ReportViewerBean for stand-alone or CrystalReportViewer for web)? The viewer should introspect the report for the parameter fields and bring up a parameter field entry dialog box. Does such a dialog box come up? Is only the main report parameter field queried for, or both main and subreport paramter fields? When you enter correct values for the field, does the report display?
Hopefully, the above should narrow down the issue.
By the way, JRC doesn't support ODBC connections, only Java based connectivity such as JDBC, JavaBeans and XML. If you have a report with ODBC, then it looks for a JNDI connection with the same name.
Sincerely,
Ted Ueda

Cannot export to Compressor from Final Cut Pro 5.1

This message shows up "A file of this name already existed" when I export to Compressor from final Cut Pro 5.1
Please help...

I have almost the same problem. When I export a file directly from Final Cut Pro 5.1, the application crashes. Have you had any answer?
Please reply.

Error exporting to Compressor

Similar Messages

Maybe you are looking for