Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
                      So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01,  FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Similar Messages

  • Extract structure does not exist at the time of transport

    HI ,
    i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis  is
    Extract structure does not exist at the time of transport
    Long text of error message:
    Technical information about the message:
    Message class....... "RD"
    Number.............. 041
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    please provide the  solution asap

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

  • Error : DB Mapping does not exist for the Host in iSetup

    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    Thanks in advance,
    Regards,
    900076.

    900076 wrote:
    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
    http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
    Thanks,
    Hussein

  • API error: Element link does not exist for the duration of the entry

    I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
    While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
    ORA-20001: Element link does not exist for the duration of the entry
    Cause: The link has been purged or date effectively deleted.
    Action: Check the effective start and end dates on the link definitions for this element.
    I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
    The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
    Any idea?
    Message was edited by:
    briard

    Here are the parameters I use in my call.
    DECLARE
    L_EFFECTIVE_START_DATE DATE;
    L_EFFECTIVE_END_DATE DATE;
    L_ELEMENT_ENTRY_ID NUMBER;
    L_OBJECT_VERSION_NUMBER NUMBER;
    L_WARNING BOOLEAN;
    BEGIN
    APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
    P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
    P_BUSINESS_GROUP_ID => 1,
    P_ASSIGNMENT_ID => 122147
    P_ELEMENT_LINK_ID => 233,
    P_ENTRY_TYPE => 'E',
    P_INPUT_VALUE_ID1 => 313,
    P_ENTRY_VALUE1 => 'T',
    P_INPUT_VALUE_ID2 => 314,
    P_ENTRY_VALUE2 => '5',
    -- out params
    P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
    P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
    P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
    P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
    P_CREATE_WARNING => L_WARNING);
    END;
    François

  • Node id does not exist for the current application server id

    Hi gurus,
    when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
    i executed the command select server_id from fnd_nodes and had the following output
    SERVER_ID
    991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
    ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
    IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    Please help me out.
    thanks.

    i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
    applmgr >./adstrtal.sh apps/apps
    You are running adstrtal.sh version 115.19
    Executing service control script:
    /dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
    script returned:
    adapcctl.sh version 115.55
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener is not running.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener (PLSQL) is not running.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    adapcctl.sh: exiting with status 0
    .end std out.
    .end err out.
    please what should i do next to resolve this problem.
    thanks

  • Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID:

    Expert,
    I did the following steps to upgrade the OWB repository from 10g to 11g
    • Created a dummy workspace in the 11.2 repository
    • Created users in the destination environment
    • Run Repository Assistant against the 11.1 source database
    • Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
    After 99% of completing I have got the below error
    Error ACLContainer: 65315 does NOT EXIST in  the Object Cache for parentID: 65314
    Please let me know the solution.
    Thanks,
    Balaa...

    Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
    Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
    refer
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    This will give you info about your missing ACL
    Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
    please refer :
    Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
    OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
    Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
    Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
    Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
    It might resolve this ACL issue but it did not work for me.
    If none of these work then
    Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
    It worked for me.
    Varun

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • Node id does not exist for the current application server id  on forms

    Hi,
    We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
    We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
    while opening oracle forms we are getting" Node id does not exist for the current application server id "
    on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
    Fnd_nodes... which matches ( there is no mismatch of application server id) .
    We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
    Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
    Can some one guide as to which file has this message "Node id does not exist for the current application server id "
    and what could be the reason for this.
    Help is appreciated.
    Regards,
    Milan

    I already tried the mentioned metalink note id but it did not work.What did you try exactly?
    Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
    i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
    Thanks,
    Hussein

  • Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch.

    Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch. Cannot
    scale/create batch.
    While auto shipping the above error i am getting. Please somebody help on this.
    Thanks.

    Hi,
    Could you please let us know which Oracle Product was installed and it complete 5 digit version.
    Regards,
    Prakash.

  • ORA-13605: The specified task or object Get does not exist for the current

    Dear all,
    11.1.0.6 on solaris 10
    SQL>
    SQL> DECLARE
    2 taskname varchar2(100);
    3 taskdesc varchar2(128);
    4 task_id number;
    5 object_id number;
    6 timeLimit varchar2(25);
    7 numDaysToRetain varchar2(25);
    8 objectName varchar2(100);
    9 objectType varchar2(100);
    10 BEGIN
    11 taskname := 'SEGMENTADV_8980096';
    12 taskdesc :='Get';
    13 numDaysToRetain :='30';
    14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
    15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
    16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
    17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
    18 END;
    19 /
    DECLARE
    ERROR at line 1:
    ORA-13605: The specified task or object Get does not exist for the current
    user.
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
    ORA-06512: at "SYS.DBMS_ADVISOR", line 56
    ORA-06512: at line 14
    Am running the above as sys user ..
    Any idea ?
    Kai

    Hi,
    This link may help:
    ORA-13605: The specified task or object ADDM:<task number> does not exist.
    Thanks and Regards,
    Rajesh K.

  • Table does not exist for the sys user

    Hey Everyone,
    I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
    Thanks,
    Sarang

    Yeah i am using the query....
    SELECT * FORM SCOTT.EMP
    It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

  • Shows 'ORA-01435: user does not exist' for the existing user

    Hi All,
    when I am trying to import this dump into oracle 10g, I am getting following error.
    I have created a talespace 'EXIM' for this already
    this is my user creation command
    CREATE USER EXIM PROFILE DEFAULT IDENTIFIED BY pass DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
    ACCOUNT UNLOCK;
    GRANT dba to EXIM;
    the user exists in the dba_users too.
    E:\Eximbills>imp exim/pass file=e:\eximbills\exim.dmp fromuser=exim touser=ex
    im;
    Import: Release 10.1.0.2.0 - Production on Tue Jan 8 13:00:44 2008
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.02.01 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    export client uses ZHS16GBK character set (possible charset conversion)
    export server uses UTF8 NCHAR character set (possible ncharset conversion)
    IMP-00008: unrecognized statement in the export file:
    . importing EXIM's objects into EXIM;
    IMP-00003: ORACLE error 1435 encountered
    ORA-01435: user does not exist
    Import terminated successfully with warnings.
    thanks in advance
    soorya

    This is the error I'm getting whenever I am trying to import 'imp eximsys/h4rdw0rk file=e:eximbills\eximsys.dmp full=y'
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
    "02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
    "ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
    "000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
    "NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
    "R_HEADER"','"C_LAST_MODI_BU"', NULL ,NULL,NULL,1,1,0,srec,13,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
    "EC.MAXVAL := '786C0804010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454110,2454683); SREC.BKVALS := DBMS_STATS.NUM"
    "ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
    "EADER"','"C_LAST_MODI_DATE"', NULL ,NULL,NULL,29,.0344827586206897,0,srec,8"
    ",6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '50433030314F5031202"
    "020202020202020202020202020202020202020202020'; SREC.MAXVAL := '765F70636F7"
    "03031202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(4167464879929240000000"
    "00000000000000,614626762547395000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_LAST_MODI_OP"', NULL ,NULL,NULL,3,.333333333333333,0,sr"
    "ec,33,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D18'; SR"
    "EC.MAXVAL := '786B0801140C01'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454102.39471065,2454314.79930556); SREC.BKVALS"
    " := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
    "LL,'"TRX_VOUCHER_HEADER"','"C_LAST_MODI_TIME"', NULL ,NULL,NULL,7308,.00013"
    "6836343732895,0,srec,8,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '72756C655F746573744"
    "32E786D6C202020202020202020202020202020202020'; SREC.MAXVAL := '72756C655F7"
    "46573744D2E786D6C202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(5943034718115330000000"
    "00000000000000,594303471811533000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_MAIL_RULE"', NULL ,NULL,NULL,2,.5,47698,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4144343030303430373"
    "030303530342020202020202020202020202020202020'; SREC.MAXVAL := '51413430303"
    "03530373038393134342020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(3388826344357990000000"
    "00000000000000,421898536943546000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_MAIN_REF"', NULL ,NULL,NULL,3294,.000303582270795386,0,"
    "srec,41,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '44495343'; SREC.MAX"
    "VAL := '64736120'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS"
    "_STATS.NUMARRAY(354563398993257000000000000000000000,5215698580320240000000"
    "00000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DB"
    "MS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_MODULE"', NULL ,N"
    "ULL,NULL,14,.0714285714285714,0,srec,5,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '2020202020202020202"
    "020202020202020202020202020202020202020202020'; SREC.MAXVAL := '63696E64797"
    "46573742020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(1668050818239890000000"
    "00000000000000,516175788196539000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_MSEND_NAME"', NULL ,NULL,NULL,4,.25,1198,srec,33,6); EN"
    "D;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
    "02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
    "ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
    "000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
    "NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
    "R_HEADER"','"C_ORG_UNIT_CODE"', NULL ,NULL,NULL,1,1,16,srec,13,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
    " '562D46696E616C3A31'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := "
    "DBMS_STATS.NUMARRAY(166153499473115000000000000000000000,447455816866904000"
    "000000000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2"
    "; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PEPRTING_INFO"
    ""', NULL ,NULL,NULL,2,.5,977,srec,3,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
    " '562D46696E616C3A31'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := "
    "DBMS_STATS.NUMARRAY(166153499473115000000000000000000000,447455816866904000"
    "000000000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2"
    "; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRINTER_NAME""
    "', NULL ,NULL,NULL,3,.333333333333333,960,srec,3,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '5B30303130303130303"
    "13A4E505D5B3030313030313030313A4E525D'; SREC.MAXVAL := '5B424F4350433030313"
    "A4E525D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NU"
    "MARRAY(473476387962467000000000000000000000,4738439330178760000000000000000"
    "00000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS."
    "SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRINT_TO_BU"', NULL ,NULL,"
    "NULL,4,.25,47203,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
    " NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
    "S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRTING_INFO"', NULL ,NUL"
    "L,NULL,0,0,47720,srec,0,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '41'; SREC.MAXVAL :="
    " '59'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(338150878155639000000000000000000000,4627660027604750000000000000000000"
    "00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
    "_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRT_MODE"', NULL ,NULL,NULL,3"
    ",.333333333333333,46148,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
    " '59'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(166805081823989000000000000000000000,4627660027604750000000000000000000"
    "00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
    "_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRT_STATE"', NULL ,NULL,NULL,"
    "4,.25,0,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
    "02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
    "ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
    "000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
    "NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
    "R_HEADER"','"C_RELEASE_BU"', NULL ,NULL,NULL,1,1,558,srec,13,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
    "EC.MAXVAL := '786B0808010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454110,2454321); SREC.BKVALS := DBMS_STATS.NUM"
    "ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
    "EADER"','"C_RELEASE_DATE"', NULL ,NULL,NULL,22,.0454545454545455,558,srec,8"
    ",6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '50433030314F5031202"
    "020202020202020202020202020202020202020202020'; SREC.MAXVAL := '765F70636F7"
    "03031202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(4167464879929240000000"
    "00000000000000,614626762547395000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_RELEASE_OP"', NULL ,NULL,NULL,3,.333333333333333,558,sr"
    "ec,33,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
    " '46'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(166805081823989000000000000000000000,3641123624483130000000000000000000"
    "00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
    "_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_SETTL_AC_PS"', NULL ,NULL,NUL"
    "L,2,.5,0,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '654C4F414E202020202"
    "020202020202020202020202020202020202020202020'; SREC.MAXVAL := '654C4F414E2"
    "02020202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(5259697250777070000000"
    "00000000000000,525969725077707000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_STP_CODE"', NULL ,NULL,NULL,1,1,1330,srec,33,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '51415F4D41494C5F544"
    "54D50310251415F4D41494C5F54454D5032'; SREC.MAXVAL := '63696E647974657374'; "
    "SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(421"
    "901952750269000000000000000000000,516175788196539000000000000000000000); SR"
    "EC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN"
    "_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_TEMPLATES_NAME"', NULL ,NULL,NULL,5,"
    ".2,47641,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3230303730313039313"
    "032333032393435323630303631343731393039343137'; SREC.MAXVAL := '32303037303"
    "83237313035333437353331303631313535363432363135373736'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(2605922186194540000000"
    "00000000000000,260592218619487000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_TRX_INDX"', NULL ,NULL,NULL,47720,.0000209555741827326,"
    "0,srec,33,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3132333133313233202"
    "020202020202020202020202020202020202020202020'; SREC.MAXVAL := '77657277722"
    "02020202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
    "C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(2554407224113300000000"
    "00000000000000,619940918512825000000000000000000000); SREC.BKVALS := DBMS_S"
    "TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
    "OUCHER_HEADER"','"C_TRX_REF"', NULL ,NULL,NULL,3294,.000303582270795386,0,s"
    "rec,41,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
    "02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
    "ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
    "000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
    "NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
    "R_HEADER"','"C_UNIT_CODE"', NULL ,NULL,NULL,1,1,0,srec,13,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4D'; SREC.MAXVAL :="
    " '4D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(399806858107182000000000000000000000,3998068581071820000000000000000000"
    "00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
    "_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_VCH_STATUS"', NULL ,NULL,NULL"
    ",1,1,1330,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4D'; SREC.MAXVAL :="
    " '58'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(400458440458057000000000000000000000,4575737059019400000000000000000000"
    "00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
    "_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_VOUCHER_STATE"', NULL ,NULL,N"
    "ULL,3,.333333333333333,0,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
    "EC.MAXVAL := '786B081B010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454110,2454340); SREC.BKVALS := DBMS_STATS.NUM"
    "ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
    "EADER"','"D_SYS_OP_DATE"', NULL ,NULL,NULL,47,.0212765957446809,0,srec,8,6)"
    "; END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
    "EC.MAXVAL := '786B0809010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454110,2454322); SREC.BKVALS := DBMS_STATS.NUM"
    "ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
    "EADER"','"D_SYS_REL_DATE"', NULL ,NULL,NULL,33,.0303030303030303,558,srec,8"
    ",6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '80'; SREC.MAXVAL :="
    " '80'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
    "S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I_CPY_NUMS"', NULL ,NULL,N"
    "ULL,1,1,1330,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3A5B6365654766'; SR"
    "EC.MAXVAL := 'C10D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DB"
    "MS_STATS.NUMARRAY(-1002000030,12); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1);"
    " SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I"
    "_EVENT_TIMES"', NULL ,NULL,NULL,88,.0113636363636364,0,srec,8,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '80'; SREC.MAXVAL :="
    " '80'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
    "S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I_PECPY_NUMS"', NULL ,NULL"
    ",NULL,1,1,1330,srec,2,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D08'; SR"
    "EC.MAXVAL := '786B0801140C01'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454102.39452546,2454314.79930556); SREC.BKVALS"
    " := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
    "LL,'"TRX_VOUCHER_HEADER"','"T_SYS_OP_TIME"', NULL ,NULL,NULL,7319,.00013663"
    "0687252357,0,srec,8,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D18'; SR"
    "EC.MAXVAL := '786B0801102B16'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
    "VALS := DBMS_STATS.NUMARRAY(2454102.39471065,2454314.65440972); SREC.BKVALS"
    " := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
    "LL,'"TRX_VOUCHER_HEADER"','"T_SYS_REL_TIME"', NULL ,NULL,NULL,7139,.0001400"
    "75640846057,558,srec,8,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00017: following statement failed with ORACLE error 20001:
    "DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
    " NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
    "RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
    "S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"T_SYS_TRX_TIME"', NULL ,NU"
    "LL,NULL,0,0,47720,srec,1,6); END;"
    IMP-00003: ORACLE error 20001 encountered
    ORA-20001: Invalid or inconsistent input values
    ORA-06512: at "SYS.DBMS_STATS", line 4194
    ORA-06512: at line 1
    IMP-00041: Warning: object created with compilation warnings
    "CREATE FORCE VIEW "EXIMSYS"."TET_TEST" ("CUST_ID",""
    "CUST_NM","CUST_NM_ADD","C_CP_UNIT_CODE") AS "
    "SELECT CUST_MASTER.CUST_ID, CUST_MASTER.CUST_NM, CUST_MASTER.CUST_NM_ADD, C"
    "UST_MASTER.C_CP_UNIT_CODE "
    " FROM EXIMTRX.CUST_MASTER CUST_MASTER "
    " WHERE CUST_MASTER.CUST_ID='10245'"
    About to enable constraints...
    Import terminated successfully with warnings.
    Thanks,

  • Batch does not exists for the material

    Dear Gurus
    In the inspection set up in qm view of material master  I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system  is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
    What are the settings that I need to do so that this discrepency does not arise.
    Regards
    Sandip Sarkar

    sandip:
    1) DO you assign a batch number to the product during order creation ??
    2) Why do you have to enter with QA32 to save the inspection lot? This is saved once you release the order.

  • ORA-01006:bind variable does not exist for the QUERY

    Dear All,
    Please help on below query :
    DECLARE
    P_ROTATION_NO GCH_VSL_REGN.ROTATION_NO%TYPE :=21;
    P_VESL_NO GCH_VSL_MASTER.VESL_NO%TYPE := NULL;
    P_VESL_NAME GCH_VSL_MASTER.VESL_NAME%TYPE:= NULL;
    P_FROM_REG_DATE GCH_VSL_MASTER.CREATED_DATE%TYPE:= NULL;
    P_TO_REG_DATE GCH_VSL_MASTER.CREATED_DATE%TYPE:= NULL;
    P_FROM_ARRIVAL_DATE GCH_VSL_REGN.ARRIVAL_DATE%TYPE:= NULL;
    P_TO_ARRIVAL_DATE GCH_VSL_REGN.ARRIVAL_DATE%TYPE:= NULL;
    P_CLOSE_TYPE GCH_VSL_CLOSE_DTLS.CLOSE_TYPE%TYPE:= NULL;
    P_RESULT_LIST SYS_REFCURSOR;
    P_TOTAL_LENGTH NUMBER;
    P_ERROR_MESSAGE VARCHAR2(1000);
    lv_sql1 VARCHAR2(5000);
    lv_sql2 VARCHAR2(5000);
    lv_whereClause VARCHAR2(5000);
    pv_text VARCHAR2(1000);
    BEGIN
    pv_text := NULL;
    lv_whereClause := ' WHERE GVM.VESL_MASTER_NUM = GVR.VESL_MASTER_NUM
    AND GVR.ROTATION_NO = GVCH.ROTATION_NO
    AND GVCH.CLOSE_HDR_ID = GVCD.CLOSE_HDR_ID(+)
    AND (:P_ROTATION_NO IS NULL OR
    (:P_ROTATION_NO IS NOT NULL AND
    GVR.ROTATION_NO LIKE % :P_ROTATION_NO %))
    AND GVM.IS_VALID = 1';
    lv_sql1 := 'SELECT COUNT(gvr.rotation_no)
    FROM gch_vsl_close_hdr gvch,
    gch_vsl_master gvm,
    gch_vsl_regn gvr,
    gch_vsl_close_dtls gvcd'||lv_whereClause;
    dbms_output.put_line (lv_sql1);
    EXECUTE IMMEDIATE lv_sql1 INTO :P_TOTAL_LENGTH
    USING P_ROTATION_NO;
    END;
    I am getting below error when running the above query
    ORA-01006:     bind variable does not exist

    why (date datatype assumed for variables with names containing DATE)
    PROCEDURE XVY(P_ROTATION_NO IN GCH_VSL_REGN.ROTATION_NO%TYPE,
                  P_VESL_NO IN GCH_VSL_MASTER.VESL_NO%TYPE,
                  P_VESL_NAME IN GCH_VSL_MASTER.VESL_NAME%TYPE,
                  P_CM_REGN_NO IN GCH_VSL_REGN.CM_REGN_NO%TYPE,
                  P_FINAL_CLOSE_STA IN GCH_VSL_CLOSE_HDR.FINAL_CLOSE_STA%TYPE,
                  P_FROM_REG_DATE IN GCH_VSL_MASTER.Created_Date%TYPE,
                  P_TO_REG_DATE IN GCH_VSL_MASTER.CREATED_DATE%TYPE,
                  P_FROM_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
                  P_TO_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
                  P_RESULT_LIST OUT SYS_REFCURSOR,
                  P_TOTAL_LENGTH OUT NUMBER,
                  P_ERROR_MESSAGE OUT VARCHAR2
                 ) AS
      lv_sql1        VARCHAR2(4000);
      lv_sql2        VARCHAR2(4000);
      lv_whereClause VARCHAR2(4000);
    BEGIN
    --  pv_text := NULL;
      lv_whereClause := ' WHERE gvm.vesl_master_num = gvr.vesl_master_num '||
                          ' AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO '||
                          ' AND (:P_ROTATION_NO IS NULL '||
                          '  OR  (:P_ROTATION_NO IS NOT NULL '||
                          ' AND   gvch.rotation_no LIKE ''%'' || :P_ROTATION_NO || ''%'' ' ||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_CM_REGN_NO IS NULL '||
                          '  OR  (:P_CM_REGN_NO IS NOT NULL '||
                          ' AND   gvr.cm_regn_no LIKE ''%'' || :P_CM_REGN_NO || ''%'' '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_VESL_NAME IS NULL '||
                          '  OR  (:P_VESL_NAME IS NOT NULL '||
                          ' AND   gvm.vesl_name LIKE ''%'' || :P_VESL_NAME || ''%'' '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_VESL_NO IS NULL '||
                          '  OR  (:P_VESL_NO IS NOT NULL '||
                          ' AND   GVM.vesl_no LIKE ''%'' || :P_VESL_NO || ''%'' '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_FINAL_CLOSE_STA IS NULL '||
                          '  OR  (:P_FINAL_CLOSE_STA IS NOT NULL '||
                          ' AND   gvch.imp_close_sta LIKE ''%'' || :P_FINAL_CLOSE_STA || ''%'' '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_FROM_REG_DATE IS NULL '||
                          '  OR  (:P_FROM_REG_DATE IS NOT NULL '||
                          ' AND   gvch.created_date >= :P_FROM_REG_DATE '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_TO_REG_DATE IS NULL '||
                          '  OR  (:P_TO_REG_DATE IS NOT NULL '||
                          ' AND   gvch.created_date <= :P_TO_REG_DATE '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_FROM_ARRIVAL_DATE IS NULL '||
                          '  OR  (:P_FROM_ARRIVAL_DATE IS NOT NULL '||
                          ' AND   gvch.arrival_date >= :P_P_FROM_ARRIVAL_DATE '||
                          '      ) '||
                          '     ) '||
                          ' AND (:P_TO_ARRIVAL_DATE IS NULL '||
                          '  OR  (:P_TO_ARRIVAL_DATE IS NOT NULL '||
                          ' AND   gvch.arrival_date <= :P_TO_ARRIVAL_DATE '||
                          '      ) '||
                          '     ) '||
                          ' AND gvm.is_valid = 10 ';
      lv_sql1 := 'SELECT COUNT(gvr.rotation_no) '||
                 '  FROM xvz gvch, '||
                 '       zxsc gvm, '||
                 '       dsae gvr, '||
                 '       vvsd gvcd '|| lv_whereClause;
      lv_sql2 := ' SELECT gvch.close_hdr_id, '||
                 '        gvch.rotation_no, '||
                 '        gvr.cm_regn_no, '||
                 '        gvm.vesl_no, '||
                 '        gvm.vesl_name, '||
                 '        gvch.final_close_sta, '||
                 '        gvr.arrival_date, '||
                 '        gvch.close_date, '||
                 '        gvr.created_date '||
                 '   FROM xvz gvch, '||
                 '        zxsc gvm, '||
                 '        dsze gvr '|| lv_whereClause || 'ORDER BY gvch.rotation_no';
      EXECUTE IMMEDIATE lv_sql1 INTO P_TOTAL_LENGTH
                  USING P_ROTATION_NO,P_ROTATION_NO,P_ROTATION_NO,
                        P_CM_REGN_NO,P_CM_REGN_NO,P_CM_REGN_NO,
                        P_VESL_NAME,P_VESL_NAME,P_VESL_NAME,
                        P_VESL_NO,P_VESL_NO,P_VESL_NO,
                        P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,
                        P_FROM_REG_DATE,P_FROM_REG_DATE,P_FROM_REG_DATE,
                        P_TO_REG_DATE,P_TO_REG_DATE,P_TO_REG_DATE,
                        P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,
                        P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE;
      OPEN P_RESULT_LIST
       FOR lv_sql2 USING P_ROTATION_NO,P_ROTATION_NO,P_ROTATION_NO,
                         P_CM_REGN_NO,P_CM_REGN_NO,P_CM_REGN_NO,
                         P_VESL_NAME,P_VESL_NAME,P_VESL_NAME,
                         P_VESL_NO,P_VESL_NO,P_VESL_NO,
                         P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,P_FINAL_CLOSE_STA,
                         P_FROM_REG_DATE,P_FROM_REG_DATE,P_FROM_REG_DATE,
                         P_TO_REG_DATE,P_TO_REG_DATE,P_TO_REG_DATE,
                         P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,P_FROM_ARRIVAL_DATE,
                         P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE,P_TO_ARRIVAL_DATE;
    END;instead of (the where clauses should be equivalent)
    PROCEDURE XVY(P_ROTATION_NO IN GCH_VSL_REGN.ROTATION_NO%TYPE,
                  P_VESL_NO IN GCH_VSL_MASTER.VESL_NO%TYPE,
                  P_VESL_NAME IN GCH_VSL_MASTER.VESL_NAME%TYPE,
                  P_CM_REGN_NO IN GCH_VSL_REGN.CM_REGN_NO%TYPE,
                  P_FINAL_CLOSE_STA IN GCH_VSL_CLOSE_HDR.FINAL_CLOSE_STA%TYPE,
                  P_FROM_REG_DATE IN GCH_VSL_MASTER.Created_Date%TYPE,
                  P_TO_REG_DATE IN GCH_VSL_MASTER.CREATED_DATE%TYPE,
                  P_FROM_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
                  P_TO_ARRIVAL_DATE IN GCH_VSL_REGN.ARRIVAL_DATE%TYPE,
                  P_RESULT_LIST OUT SYS_REFCURSOR,
                  P_TOTAL_LENGTH OUT NUMBER,
                  P_ERROR_MESSAGE OUT VARCHAR2
                 ) AS
      lv_sql1        VARCHAR2(4000);
      lv_sql2        VARCHAR2(4000);
      lv_whereClause VARCHAR2(4000);
    BEGIN
      SELECT COUNT(gvr.rotation_no)
        INTO P_TOTAL_LENGTH
        FROM xvz gvch,
             zxsc gvm,
             dsae gvr,
             vvsd gvcd
       WHERE gvm.vesl_master_num = gvr.vesl_master_num
         AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO
         AND (P_ROTATION_NO IS NULL
          OR  (P_ROTATION_NO IS NOT NULL
         AND   gvch.rotation_no LIKE '%' || P_ROTATION_NO || '%'
         AND (P_CM_REGN_NO IS NULL
          OR  (P_CM_REGN_NO IS NOT NULL
         AND   gvr.cm_regn_no LIKE '%' || P_CM_REGN_NO || '%'
         AND (P_VESL_NAME IS NULL
          OR  (P_VESL_NAME IS NOT NULL
         AND   gvm.vesl_name LIKE '%' || P_VESL_NAME || '%'
         AND (P_VESL_NO IS NULL
          OR  (P_VESL_NO IS NOT NULL
         AND   GVM.vesl_no LIKE '%' || P_VESL_NO || '%'
         AND (P_FINAL_CLOSE_STA IS NULL
          OR  (P_FINAL_CLOSE_STA IS NOT NULL
         AND   gvch.imp_close_sta LIKE '%' || P_FINAL_CLOSE_STA || '%'
         AND (P_FROM_REG_DATE IS NULL
          OR  (P_FROM_REG_DATE IS NOT NULL
         AND   gvch.created_date >= P_FROM_REG_DATE
         AND (P_TO_REG_DATE IS NULL
          OR  (P_TO_REG_DATE IS NOT NULL
         AND   gvch.created_date <= P_TO_REG_DATE
         AND (P_FROM_ARRIVAL_DATE IS NULL
          OR  (P_FROM_ARRIVAL_DATE IS NOT NULL
         AND   gvch.arrival_date >= P_P_FROM_ARRIVAL_DATE
         AND (P_TO_ARRIVAL_DATE IS NULL
          OR  (P_TO_ARRIVAL_DATE IS NOT NULL
         AND   gvch.arrival_date <= P_TO_ARRIVAL_DATE
         AND gvm.is_valid = 10;
      OPEN P_RESULT_LIST
       FOR SELECT gvch.close_hdr_id, 
                  gvch.rotation_no, 
                  gvr.cm_regn_no, 
                  gvm.vesl_no, 
                  gvm.vesl_name, 
                  gvch.final_close_sta, 
                  gvr.arrival_date, 
                  gvch.close_date, 
                  gvr.created_date 
             FROM xvz gvch, 
                  zxsc gvm, 
                  dsze gvr
            WHERE gvm.vesl_master_num = gvr.vesl_master_num
              AND GVR.ROTATION_NO(+) = GVCH.ROTATION_NO
              AND gvch.rotation_no LIKE '%' || nvl(P_ROTATION_NO,gvch.rotation_no) || '%'
              AND gvr.cm_regn_no LIKE '%' || nvl(P_CM_REGN_NO,gvr.cm_regn_no) || '%'
              AND gvm.vesl_name LIKE '%' || nvl(P_VESL_NAME,gvm.vesl_name) || '%'
              AND gvm.vesl_no LIKE '%' || nvl(P_VESL_NO,gvm.vesl_no) || '%'
              AND gvch.imp_close_sta LIKE '%' || nvl(P_FINAL_CLOSE_STA,gvch.imp_close_sta) || '%'
              AND gvch.created_date BETWEEN nvl(P_FROM_REG_DATE,gvch.created_date) AND nvl(P_TO_REG_DATE,gvch.created_date)
              AND gvch.arrival_date BETWEEN nvl(P_FROM_ARRIVAL_DATE,gvch.arrival_date) AND nvl(P_TO_ARRIVAL_DATE,gvch.arrival_date)
              AND gvm.is_valid = 10;
            ORDER BY gvch.rotation_no;
    END;Regards
    Etbin
    Edited by: Etbin on 8.4.2012 14:37
    In order not to waste your time in the future:
    Don't execute dynamic SQL until it works !!!
    Write out what you managed to put together using dbms_output.
    Paste that into the SQL window of your client tool (SQL Developer ...)
    Convert parameters to bind variables (replace p_ with :p_)
    Try to run it.
    If errors are thrown correct them, adjust the procedure/function set up to write your dynamic SQL accordingly
    Repeat the cycle until no errors are thrown
    Comment out the dbms_output. ... line
    Uncomment the execute immediate ... line

  • What is supposed to happen if the font for a control on the startup form does not exist on the system?

    Say you put a button on a form and dont change the font ie ms san serif, then the app is installed on a system that does not have the font ms san serif installed. Is it supposed to throw an error when the form initializes? Since this happens before any user
    code the error can go untrapped in the start up form and crashes to the system.
    I discovered it does this if you specify the font in the designer to be "Arial Narrow" and it is not installed. But whats funny is the error is not font does not exist, it is "Arial Narrow" does not support style Regular. Even though
    I set the font in the IDE for the control. How can I be setting it with the IDE to something that does not exist for the font I set (Arial Narrow is on the IDE system)?
    I have always thought that vb would just use a different font if the control font did not exist without an error. In my case it was a secondary form so the error was trapped. But, I don't see how to trap the error if it is the startup form.

    PS
    "I meant that you should set the buttons font to something like
    MS Sans Serif "
    What if ms sans is not on the system? Then you cant do anything.
    Maybe I am being picky but just sayin...
    I don't suppose you're being picky specifically although I think I got a headache attempting to do the below.
    I do think this is a bug though which you should probably report.
    However I tried this and it worked fine. Except I had to alter the Form1.Designer.vb file to do this. I tested this. I didn't test without this to see if I would get the exception you received.
    I downloaded a Font called Kingsthings Christmas from the second link in my post for links to download fonts. Added that to my systems Fonts and tested the code. Removed that from my systems fonts and tested the code. It worked in both instances.
    I suspect that the Font in the Form1.Designer.VB file for the New Font for the TabControl and TreeView would work with the default system font set to use 21.75! and font style regular but if the default system font didn't support both of those then an issue
    could occur obviously. So if somebody used Control Panel to set the default system font to something that doesn't support those two things then you will need to alter the code to detect what the default system font can use for those two settings
    possibly.
    Form1's code
    Option Strict On
    Imports System.Drawing.Text
    Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
    TreeView1.BeginUpdate()
    TreeView1.Nodes.Add("Parent")
    TreeView1.Nodes(0).Nodes.Add("Child 1")
    TreeView1.Nodes(0).Nodes.Add("Child 2")
    TreeView1.Nodes(0).Nodes(1).Nodes.Add("Grandchild")
    TreeView1.Nodes(0).Nodes(1).Nodes(0).Nodes.Add("Great Grandchild")
    TreeView1.EndUpdate()
    For Each f As FontFamily In New InstalledFontCollection().Families
    RichTextBox1.AppendText(f.Name.ToString & vbCrLf)
    Next
    End Sub
    End Class
    Form1.Designer.VB files code which you're not supposed to alter of course.
    Option Strict On
    Imports System.Drawing.Text
    <Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
    Partial Class Form1
    Inherits System.Windows.Forms.Form
    'Form overrides dispose to clean up the component list.
    <System.Diagnostics.DebuggerNonUserCode()> _
    Protected Overrides Sub Dispose(ByVal disposing As Boolean)
    Try
    If disposing AndAlso components IsNot Nothing Then
    components.Dispose()
    End If
    Finally
    MyBase.Dispose(disposing)
    End Try
    End Sub
    'Required by the Windows Form Designer
    Private components As System.ComponentModel.IContainer
    'NOTE: The following procedure is required by the Windows Form Designer
    'It can be modified using the Windows Form Designer.
    'Do not modify it using the code editor.
    Dim FontToUse As Font
    <System.Diagnostics.DebuggerStepThrough()> _
    Private Sub InitializeComponent()
    For Each f As FontFamily In New InstalledFontCollection().Families
    If f.Name.ToString = "Kingthings Christmas 2" Then
    FontToUse = New Font(f.Name.ToString, 24)
    Exit For
    Else
    FontToUse = New Font(SystemFonts.DefaultFont.FontFamily.Name.ToString, 24)
    End If
    Next
    Me.TabControl1 = New System.Windows.Forms.TabControl()
    Me.TabPage1 = New System.Windows.Forms.TabPage()
    Me.TabPage2 = New System.Windows.Forms.TabPage()
    Me.TabPage3 = New System.Windows.Forms.TabPage()
    Me.TabPage4 = New System.Windows.Forms.TabPage()
    Me.TabPage5 = New System.Windows.Forms.TabPage()
    Me.TreeView1 = New System.Windows.Forms.TreeView()
    Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
    Me.TabControl1.SuspendLayout()
    Me.SuspendLayout()
    'TabControl1
    Me.TabControl1.Controls.Add(Me.TabPage1)
    Me.TabControl1.Controls.Add(Me.TabPage2)
    Me.TabControl1.Controls.Add(Me.TabPage3)
    Me.TabControl1.Controls.Add(Me.TabPage4)
    Me.TabControl1.Controls.Add(Me.TabPage5)
    Me.TabControl1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
    Me.TabControl1.Location = New System.Drawing.Point(6, 32)
    Me.TabControl1.Name = "TabControl1"
    Me.TabControl1.SelectedIndex = 0
    Me.TabControl1.Size = New System.Drawing.Size(600, 183)
    Me.TabControl1.TabIndex = 0
    'TabPage1
    Me.TabPage1.Location = New System.Drawing.Point(4, 43)
    Me.TabPage1.Name = "TabPage1"
    Me.TabPage1.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage1.Size = New System.Drawing.Size(592, 136)
    Me.TabPage1.TabIndex = 0
    Me.TabPage1.Text = "TabPage1"
    Me.TabPage1.UseVisualStyleBackColor = True
    'TabPage2
    Me.TabPage2.Location = New System.Drawing.Point(4, 43)
    Me.TabPage2.Name = "TabPage2"
    Me.TabPage2.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage2.Size = New System.Drawing.Size(592, 136)
    Me.TabPage2.TabIndex = 1
    Me.TabPage2.Text = "TabPage2"
    Me.TabPage2.UseVisualStyleBackColor = True
    'TabPage3
    Me.TabPage3.Location = New System.Drawing.Point(4, 43)
    Me.TabPage3.Name = "TabPage3"
    Me.TabPage3.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage3.Size = New System.Drawing.Size(592, 136)
    Me.TabPage3.TabIndex = 2
    Me.TabPage3.Text = "TabPage3"
    Me.TabPage3.UseVisualStyleBackColor = True
    'TabPage4
    Me.TabPage4.Location = New System.Drawing.Point(4, 43)
    Me.TabPage4.Name = "TabPage4"
    Me.TabPage4.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage4.Size = New System.Drawing.Size(592, 136)
    Me.TabPage4.TabIndex = 3
    Me.TabPage4.Text = "TabPage4"
    Me.TabPage4.UseVisualStyleBackColor = True
    'TabPage5
    Me.TabPage5.Location = New System.Drawing.Point(4, 43)
    Me.TabPage5.Name = "TabPage5"
    Me.TabPage5.Padding = New System.Windows.Forms.Padding(3)
    Me.TabPage5.Size = New System.Drawing.Size(592, 136)
    Me.TabPage5.TabIndex = 4
    Me.TabPage5.Text = "TabPage5"
    Me.TabPage5.UseVisualStyleBackColor = True
    'TreeView1
    Me.TreeView1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
    Me.TreeView1.Location = New System.Drawing.Point(9, 229)
    Me.TreeView1.Name = "TreeView1"
    Me.TreeView1.Size = New System.Drawing.Size(704, 235)
    Me.TreeView1.TabIndex = 1
    'RichTextBox1
    Me.RichTextBox1.Location = New System.Drawing.Point(9, 475)
    Me.RichTextBox1.Name = "RichTextBox1"
    Me.RichTextBox1.Size = New System.Drawing.Size(702, 124)
    Me.RichTextBox1.TabIndex = 2
    Me.RichTextBox1.Text = ""
    'Form1
    Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
    Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
    Me.ClientSize = New System.Drawing.Size(720, 606)
    Me.Controls.Add(Me.RichTextBox1)
    Me.Controls.Add(Me.TreeView1)
    Me.Controls.Add(Me.TabControl1)
    Me.Name = "Form1"
    Me.Text = "Form1"
    Me.TabControl1.ResumeLayout(False)
    Me.ResumeLayout(False)
    End Sub
    Friend WithEvents TabControl1 As System.Windows.Forms.TabControl
    Friend WithEvents TabPage1 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage2 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage3 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage4 As System.Windows.Forms.TabPage
    Friend WithEvents TabPage5 As System.Windows.Forms.TabPage
    Friend WithEvents TreeView1 As System.Windows.Forms.TreeView
    Friend WithEvents RichTextBox1 As System.Windows.Forms.RichTextBox
    End Class
    La vida loca

Maybe you are looking for

  • XML Question - Parse out node

    My program processes an xml data stored in CRM. The program extracts the XML data as a string. I need to be able to access the data contained within a particular node. The node <result> contains my data. I need to extract these values to do subsequen

  • Macbook Pro and Windows Network Printing

    My family just had their PC's hooked up wirelessly on a network. Printing and everything else was all set up wirelessly also. The computer and the laptop work just fine, but for some reason we can't get my mac to hook up to the printing network. We c

  • "To" field unresponsive in iOS4

    I have noticed this in iOS4 both on a 3GS and an iPhone 4. When you choose to email a link or article to someone using the email option within the article, the "To" field in the email becomes unresponsive and you have to tap in the field multiple tim

  • Custom on Hold music problem

    Good Afternoon, Attempting to add custom on hold music to our UC540. I received the on hold file as a .wav so I converted it to a .au format as that appears to be the preferred file type for Cisco's on hold music. When I listen to the file after conv

  • JMS connections

    by the way, iit, can you be a little more specific as to how you handle cases in which the messages are still sent to the router in case of a network failure, I have one machine on which the server is running and another on which a QueueSender is sen