Error F5 702 for bapi_acc_invoice_receipt_post

Hello,
I am using bapi_acc_invoice_receipt_post to post vendor invoices. I am getting this error ' Balance in transaction currency F5 702'
The credit and debit entries match and zero out. I am unable to figure out why this is happening. Please Suggest.

Rob,
I filled in the tax line items with gl account and tax code its asking for account determination key and condition key. I don't know if i have to pass these for tax exempt invoices and I entered amount in tax items as '0' , the error still shows up.. Am I missing something?

Similar Messages

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

Error in OPEN_FORM for document 46000000001

Hi experts,
I have created a custom PO smartform and Custom print program. I have configured the same in the NACE tcode also. When i try to print out the PO from ME23N tcode, i am getting this error "Error in OPEN_FORM for document 46000000001". But I'm able to down the form into my system. I have also checked with the basis regarding the printer setting. Everything is fine.
But it is not printing.
Please help.
Thanks

Hi
Scripts calls are nothing but open_form, write_form, close_form...all these should be commented as there are not required in the print program for a smartform.
All you need is SSF_FUNCTION_MODULE_NAME, and to that pass on the Smartform generated Fm...for example code...search in SCN with search term ssf_function_module_name.....
Vishwa.

Error while registering for index relevant events: Invalid RID: No reposito

Hi,
I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am monitoring the application log, I see the error Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied for the IndexmanagementService.
When I see the queue status, the queue status is always idle, even after I activate the queue.
In the indexing monitor, I see the error Trex: Preparation failed: index operation
could anyone tell me what could be wrong?
Thanks,

Hi Christian,
thanks for your reply.
we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
regards
Yao

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

Table creation Error "Ref Count for this object is higher than 0"

Hi All
I have a problem in creation of table using SDK on a button event. I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
 Try
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_OBIN"
 oUserTablesMD.TableDescription = "PutAway Table"
 oUserTablesMD.TableType = BoUTBTableType.bott_Document
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_BIN1"
 oUserTablesMD.TableDescription = "PutAway Upper Grid"
 oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 If lRetCode = -1 Then
 Else
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 End If
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 Catch ex As Exception
 MsgBox(ex.Message)
 End Try
Thanks
Regards
Gorge

Hi Gorge,
The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared. And yes, you have got the error in the right place, generally while creating tables / fields / UDOs. For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
Eg: Release these objects in the below way in a Finally Block.
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
Hope this helps.
Regards,
Satish

"Network-related or instance specific error", Works OK for Administrator

I've been handed a legacy .Net Windows application that was previously used on Windows XP, and asked to debug a few problems encountered on Windows 7 clients. The original developers are all gone. I'm down to only a single
error -- a seemingly common one:
"A network related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes
Provider, error: 40 - Could not open a connection to SQL Server)"
Curiously, this error only occurs for ordinary users. When the application is started using "Run as Administrator" it connects to the database immediately. We believe we can configure the app to always start as an administrator,
but obviously we'd like to run it without that if we can. However, I haven't seen any good suggestions why the database connection would only fail this one way.
Any ideas? I've seen at least one troubleshooting guide that suggested trying with Run as Administrator, but it didn't say how to proceed if that fixes it. Am I just supposed to stop at this point? If I was having a UI problem I might understand
that some old apps just aren't going to work in Windows 7, but this is just connecting to the database. Seems like we should be able to do this. I just don't know what to check.
Thanks in advance.
EDIT:
I have looked more closely at this, and perhaps there are more clues. I use the same user account to log on to two Win7 machines. One is a developer workstation with VS10 installed. The other is representative of a client workstation the app will
run on. My user account is actually an administrator on both machines.
At runtime we invoke advapi32.dll logonuser impersonation to logon to SQL server with a dedicated account.
What we're seeing is that I can run the app freely on the developer workstation. Even with UAC on, and even if I am not using "run as administrator". This may point to something about how the SQL drivers/provider are installed
on that machine.
When I run on the regular user workstation, even though I am an administrator myself, I must "run as administrator" to launch it. And when I do, I get a UAC prompt. When we turn UAC off, of course, the app runs fine.

Hi,
I think you are in the similar case with:
http://support.microsoft.com/kb/2009672
By default SSIS always uses the low privileged token resulting in a failure when connecting to a SQL Destination. Full administrator access token is required in your case.
Unlike earlier versions of Windows, when an administrator logs on to a computer running Windows 7 or Windows Vista, the user’s full administrator access token is split into two access tokens:
a full administrator access token and a standard user access token.
During the logon process, authorization and access control components that identify an administrator are removed, resulting in a standard user access token. The standard user access token is then used to start the desktop, the Explorer.exe process. Because
all applications inherit their access control data from the initial launch of the desktop, they all run as a standard user.
After an administrator logs on, the full administrator access token is not invoked until the user attempts to perform an administrative task. When a standard user logs on, only a standard user access token is created. This standard user access token is then
used to start the desktop.
To get around this, you may configure an application to always run elevated.
http://technet.microsoft.com/en-us/library/cc709691%28WS.10%29.aspx
Thanks.
Tracy Cai
TechNet Community Support

BOBJ - BW "Error getting hierarchies for dimension... "

Im still whitout a solution for this problem, however we have found a difference between the queries that work and the queries that dont work. The difference is in the hierarchies type but we dont know what is the problem exactly.
Does anyone know if there is an specyfic type of hierarchie that we need to use???
Regards

Hi,
I wonder why you are not using the BEx / BICS connection ? (instead of the old OLAP .unv)
the process flow for generating a universe would include the following SE37 function modules:
BAPI_MDPROVIDER_GET_CATALOGS
BAPI_MDPROVIDER_GET_CUBES
BAPI_MDPROVIDER_GET_DIMENSIONS
BAPI_MDPROVIDER_GET_HIERARCHYS
You should test these in BW .
It may actually be an authorization issue - perhaps your logon doesn't have infoobject authorizations for 0Plant?
Regards,
Henry
p.s. a quick Note search suggests : 1565615 - Error when creating a Universe from BEx: "A runtime exception has occurred. (Error getting levels for hierarchy ( dimension : Unknown error)"
--> "Business Objects Personalization objects" R21K900693 transport has not been loaded properly in the BW system, transaction STMS shows this trasport not loaded.

I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

Error 6 "Licensing for this product stopped working"

I installed Adobe Web Premium CS4 in Windows Vista, but inmmediatly after installation I saw this error message: "Licensing for this product stopped working". I tried the License Recovery but the problem still.

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!

Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help.

Error F5 702 for bapi_acc_invoice_receipt_post

Similar Messages

Maybe you are looking for