Error f5333 after running AFAB

Hello experts,
I have this issue. After running afab abd got to fbl3n to display the gl account line times for this posting I get the following error:
System error: Routine Beleg_Nachlesen info 2000-6600000001-2014-006 Not in BSEG/archive ; inform systems administrator
Message no. F5333
Diagnosis
In program routine 'Beleg_Nachlesen' an error ('2000-6600000001-2014-006') has occurred. Processing is terminated.
Procedure
This is caused by a program error and you should contact SAP Support.
Can yoy please help me with that?
Regards,
Katia

Hi,
According to me this issue is caused due to some bug in system wherein the document that got posted through AFAB got archived in the system. So in this case I think you need to raise an OSS to SAP and then they will probably provide a program for rectifying the issue.
Regards,
Malhar.

Similar Messages

Read Error logs after running the background jobs

Hi,
How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
Kindly suggest.
Thanks & Regards,
N. Laxman

Hi
you can check the back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
plz check in your case and revert back
Regards
Anupam Sharma

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

Error 10846 after running VI for a day

I am trying to develop a program that acquires data continuously from 9 analog input channels, then processed the data to extract the mean, max, min for each signal and do some calculation and then store the data in a spreadsheet every minute. The VI works fine if I run it for a short time (less than 5 hours) but if I tried to run it for a long period (an all day), I get an AI error 10846. If I ignored the message error and keep running the program, the error message 10846 keeps appearing and every thing in the VI seems slowing down. If I restart the VI without restarting the computer, the VI will run but the same message error 10846 will reappear after a short time. So I have finally had to stop the program and restart the co
mputer so that the VI reruns normally. The VI is running at a scan rate = 1000 scans and a scan to read = 2000 scans, the buffer size is set up to 20000 scans. I tried to increase the buffer size up to 100000 scans and increase the scan to read up to 10000 scans but the message error keeps appearing. If I look at my scan backlog, for the first couple hours, it is equal to 0 and after that, for no reason, once in a while, the scan backlog show a value different of 0.
I do not have really a lot of experiment with Data acquisition system and I am not sure to use the correct values of those parameters. But at the same time, I do not understand why the VI is running fine for couple hours and then crashed.
Concerning the system that I am using, my computer is a 1 GHz Duron Processor running Windows 98 with 120 MB of RAM and I used:
NI software = LabView version 6.1
DAQ card = PCI-6071E
I attached my code for the ones who will have time to run it.
If anyone can offer some wisdom on
that it would be greatly appreciated.
Thanks
PS: I am also wondering if the problem could come of my computer or hardware I am using?
Attachments:
TAH_DAQ_050703.zip ‏749 KB

Right off hand, I would say that the fact you have to restart the computer to recover is very odd indeed--and troubling. Have you tried to run any of the continuous acquisition examples that ship with LV to see if they exhibit the same behaviour? Also, is the computer on a network? If so, try unplugging it and see if you still get the problem. Finally, when the thing is slowing down, what does the computer's overall CPU utilization look like?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error in Depreciation Run - AFAB

Hi All,
When i run the depreciation posting(AFAB), except one document others got posted.The error document says that it cant be posted as it is blocked by other user.
Depreciation documents are generated automatically by the system during the batch processing and how can it be blocked?
Plz help me out in this .
Thank You
Regards
Andrew

Hi,
To check which master data is blocked go to the session of AFAB and select the programme and go to the Job Log button in SM37 transaction code which will give the list of the error and who has blocked it.
Hope this helps,
Thanks and Regards,
Gokul.

Got an error code after running AHT. Now what?

I ran the Apple Hardware Test and got the error code: 4sns/1/40000000:th1H-83.265
I looked it up and it apparently means there's a problem wuth my heat pipe or heat sink. Makes sense because my MBP burns up and fans really start going when running a game, movie, or photoshop. Does this mean I have to replace something or what? How much will it cost me if I take it in for repairs? I no longer have warranty. I had to replace my harddrive after it failed in Feb 2012 so I will not be happy if it turns out the failure was related to this heat problem and never fixed.
Mid-2009 13" MBP running OSX 10.8

That error is indeed a sensor failure. Make an appointment at an Apple store genius bar. It is a hardware failure that only they can resolve. They will tell you what costs are involved, I simply do not know that.
Ciao.

Z77A-GD65 error 55 after running for 5 months just fine

Hi,
My Z77A-GD65 has been running perfectly since last May with a 3770K, G.Skill 8 GB DDR3-2133 Quad-Kit and a Antec EA-550 Platinum PSU.
Now the PC reboots continuously with error 55 showing on the mainboard.
Two weeks ago I installed a new GPU, Geforce 660ti. After some initial hassles, it was working just fine.
Things I have tried:
- Removed the GPU, No go.
- Removed all memory but 1 stick in slots 1&2. Repeated this with a different stick. No go.
Probably something broke, but not the 'bent pins' issues I see reported when people see a 55 error, as my system was running just fine.
Can anybody give a hint what broke and what should be replaced?
Thanks for the help,
J.

Thanks for the hints, but still no go...
Things I did:
- Cleared the CMOS according to the guide, actually several times, but no go.
- I borrowed a spare 650W Be Quiet PSU from a friend, but alas, I still see the 55 error.
Does this then point to a defective mainboard or the CPU? From the documentation I get the impression that 55 means that the CPU can not be started.
Is this correct?
Thanks for the help,
J.

Error Page After Run Project WebService onNetBeans4.1

Hi All,
I'm new to this group.. I'm working on Netbeans IDE5.0 Beta, and try following the steps to create a simple web service. But after creating the client application and packaging it , i got the following errors,
case1: java.rmi.ServerException: JAXRPCSERVLET28: Missing port information
case 2: no serializer is registered for
Kindly suggest me how to overcome these errors...
Regards,
Vijay

No, I haven't figured it yet. And it seems that nobody ever had.
JSCreator is buggy. If it weren't for free, I would have never use it. It has so many issues, you will see so many exceptions and experience so many annoyances... And of course, it is very hungry for resources. I am sure that a lot of people will disagree, but that's my opinion. I've been using Eclipse for 4 years now.
However here are some tips (Windows only):
Delete directory .Creator from Documents and Settings.
Uninstall creator, install creator. Don't install it to Program Files, install it to C:\Sun or smth like that, the space character can do some mess.
Again, put your project somewhere, so the path would not contain spaces.
Sometimes just restarting the server helps. I've had to reinstall Creator three times yet.

Error message after running Software Update

Please help. I cannot do the latest Software Update. I have tried multiple time and each time I have gotten the same error message. Here it is:
"The update could not be expanded and verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."

rachelbeth wrote:
I cannot do the latest Software Update. I have tried multiple time and each time I have gotten the same error message. Here it is:
"The update could not be expanded and verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."
Welcome to Apple's discussion groups.
I can't help with your issue as a general problem, but for the specific update to OS X 10.6.6, I'd download the updater directly from http://support.apple.downloads, then install it from the ".dmg" file. The specific links will be either
http://support.apple.com/kb/DL1349 for the "combo" update or
http://support.apple.com/kb/DL1343 for the update from OS X 10.6.5.

Error messages after running diagnostics

I recently ran a diagnostics tool on my Mid-2010 17" MBP and it came up with the following 4 fails - any ideas?
[03/21/13 14:34:07] * TESTING FAILED [Elapsed time = 00:03:16] *[03/21/13 14:39:47]           Right Side (test #4) - Turn Fan On Automatically
                    - System turns on fan motor and verifies fan motor can reach minimum/maximum values
[14:42:18]           ERROR -- 9 [Motor unable to stabilize between min and max limits] -- (0) TEST FAILED
[03/21/13 14:42:18]           Right Side (test #5) - Quick Fan motor Test
                    - System verifies that the fan motor is running to target speed
[14:42:34]           ERROR -- 7 [Fan motor is spinning slower than it should] -- (0) TEST FAILED
[03/21/13 14:52:14]           Hard Drive: SATA(0,0) (test #6) - Check SMART attributes
                    - Check the SMART attributes for a device.
[14:52:14]           ERROR -- 5 [No SMART attributes to check] -- TEST FAILED
[03/21/13 14:52:14]           Battery: Unconsumed Battery Capacity Test (test #31) - Unconsumed Battery Capacity Test
                    - Checks Battery has completed less cycles than design-cycle-count and maximum capacity is greater than 80% of designed capacity.
[14:52:14]           ERROR -- 6 [Capacity below minimum] -- TEST FAILED

Hi Mark,
I have a similar situation. Did the ASD test as well and came up with this:
Battery: Unconsumed Battery Capacity Test (test #31) - Unconsumed Battery Capacity Test
                    - Checks Battery has completed less cycles than design-cycle-count and maximum capacity is greater than 80% of designed capacity.
           ERROR -- 6 [Capacity below minimum] -- TEST FAILED
I was wondering how things are now?
Thanks in advance
M.

ERROR MESSAGE AFTER RUNNING A JOB

Post Author: suneel
CA Forum: Data Integration
Session ACR_IMS_TSMS_UPDATE|Dataflow IMS_TSMS_UPDATE
                                                     System Exception <> occurred.
                                                     Call stack:
                                                     (null)
                                                     Registers:
                                                     EAX=00212478 EBX=00000001 ECX=00000000 EDX=00212524 ESI=00212508
                                                     EDI=00212508 EBP=002124C8 ESP=00212474 EIP=77E4BEE7 FLG=00200206
                                                     CS=7C82001B   DS=0023 SS=210023 ES=FFFF0023   FS=21003B GS=0000
                                                     Exception code: E06D7363
                                                     Fault address: 77E4BEE7 01:0000AEE7 C:\WINDOWS\system32\kernel32.dl COULD ANYONE HELP ME OUT LIKE WHAT THIS ERROR EXACTLY MEANS?HOW TO SOLVE THESE TYPE OF SYSTEM EXCEPTIONS?

Post Author: bhofmans
CA Forum: Data Integration
These are complex issues to solve, you should open a case with support, they will ask for atl, log files and the DUMP file that is created in the log directory when a system exception occurs.

Error -36 after running software updates

I'm working at a new place that hadn't run software update in months. I just finished updating everything and now I can't connect to the server anymore. Everyone else in the office is connected, so it's just me. Also, I was connected a few hours ago before I started installing all the updates.
I had security and firmware updates included. Any ideas?
Also, the connection is being made with smb protocol, if that makes a difference. Thanks!
Message was edited by: Libbalou

most of the other computers in the office are PCs. There is only one other Mac. (that user is on vacation and I'm not sure if it will connect or not.)
I'm not sure about the server, but will try to find out and post later. (I came in this morning and nothing has changed).
Thanks again.

Dep run AFAB

Hi Experts,
After running AFAB for montly. It is not updated in AW01N(asset explorer).
Your valuable ans are highly appreciable.
regards,
Srinivas Muthyala

Dear
smuthyala,
Please check the posting run in SM37 as program RAPOST2000 if you are on ECC 6.0.
Other wise trusting on back ground job the most reliable log is AFBP.
Please check your posting log on above said T.codes.
Please revert back if you need any further clarification.
Regards,
Pankaj Bhalerao.

Error during repeat run depreciation via tcode AFAB

hi,
I have removed year-end closing for assets to year 1999 via tcode OAAQ . However, once i want to run repeat depreciation via tcode AFAB, I received error messages as follows:-
1. Field Cost Ctr is a required field for G/L account 4300000
2. Account 'Expense account for ordinary depreciation' could not be found.
Appreciate your advise to solve the errors.
Thanks a lot!

Dear Mohd.,
PLease check the following in ur configuration:
1) You must have CO implemented. That is why when u run, AFAB system posts its depreciation in cost center mentioned in asset master. Now do one thing, take out the list of assets where cost center is not attached. Take out this info from ANLZ table.
2) Go to AO90 & check the account assignment to all the account determinations.
Try executing after this. It will work.
Regards,
Ajay

OIM: Error after running in patch_oimapp.sh

Hi All,
I have OIM11gR2 installed and I am trying to configure the LDAP Synch with OID via OVD. As per the documentation, after running the patch_oimapp.sh, I am getting below error:
explode-archived-apps-was:
seed-ootb-jobs:
seed-ootb-jobs:
+[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS+
+*[java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver+*
*+[java]* at java.net.URLClassLoader$1.run(URLClassLoader.java:202)+
+[java] at java.security.AccessController.doPrivileged(Native Method)+
+[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)+
+[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:306)+
+[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)+
+[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:247)+
+[java] at java.lang.Class.forName0(Native Method)+
+[java] at java.lang.Class.forName(Class.java:169)+
+[java] at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:723)+
+[java] at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:111)+
BUILD FAILED
+/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:+
+/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:+
+/opt/oracle/Middleware/Oracle_IAM/server/seed_data/seed-rcu-data.xml:37: Java returned: 1+
Total time: 44 seconds
Below is my appserver.profile file:
# Please fill the information below before running the post-patch script.
# Put the OIM DB schema owner name here
operationsDB.user=DEV_OIM
# Put the DB driver to be used
operationsDB.driver=oracle.jdbc.OracleDriver
# Put the absolute path to the Weblogic/Websphere server directory here.
appserver.dir=/opt/oracle/Middleware/wlserver_10.3
# The host on which OIM db is running
operationsDB.host=oracle
# The service name of the OIM db [Do not mention the SID here.]
operationsDB.serviceName=ORACLE11G
# The port of the OIM db
operationsDB.port=1521
# Application server was or wls
appserver.type=wls
Any pointers what could be wrong?
Regards,
Sunny

Hi Guys,
Thanks for the reply.
Copied the ojdbc6.jar in WLS_HOME/server/lib, OIM_HOME/server/lib,DOMAIN_HOME/lib, restarted the server but still no luck:
patch:
check-appserver-type:
[echo]
[echo] websphere.server----${appserver.was}
[echo]
explode-archived-apps:
[delete] Deleting directory /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
[delete] Deleting directory /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
[mkdir] Created dir: /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
[mkdir] Created dir: /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
[unzip] Expanding: /opt/oracle/Middleware/Oracle_IAM/server/patching/oim.ear into /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
[unzip] Expanding: /opt/oracle/Middleware/Oracle_IAM/server/patching/Nexaweb.ear into /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
check-appserver-type:
[echo]
[echo] websphere.server----${appserver.was}
[echo]
explode-archived-apps-was:
seed-ootb-jobs:
seed-ootb-jobs:
[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
[java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
[java] at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
[java] at java.security.AccessController.doPrivileged(Native Method)
[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
[java] at java.lang.Class.forName0(Native Method)
[java] at java.lang.Class.forName(Class.java:169)
[java] at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:723)
[java] at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:111)
BUILD FAILED
/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:
/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:
/opt/oracle/Middleware/Oracle_IAM/server/seed_data/seed-rcu-data.xml:37: Java returned: 1
Total time: 50 seconds
Regards,
Sunny

Error f5333 after running AFAB

Similar Messages

Maybe you are looking for